rCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-AuditTrailClientUnderTest-cibuild01, from=oneContributorNotRespondingTest, to=<null>(default), version=31, minVersion=24, auditTrailInformation=<null>(default), contributor=Pillar1, fileID=<null>(default), minSequenceNumber=<null>(default), maxSequenceNumber=<null>(default), minTimestamp=<null>(default), maxTimestamp=<null>(default), maxNumberOfResults=<null>(default), resultAddress=<null>(default)]
Step: Verify that the client continues to the performing phase.
Step: Send a final response upload message
Result: Received event: aa99e0a0: GET_AUDIT_TRAILS: COMPONENT_COMPLETE: ContributorID Pillar1, PartialResult=false
Result: Received event: aa99e0a0: GET_AUDIT_TRAILS: FAILED: , Failed operation. Cause(s):
[aa99e0a0: GET_AUDIT_TRAILS: COMPONENT_FAILED: ContributorID Pillar2 ResponseCode: null, Timeout for identifying contributor]
Test success: oneContributorNotRespondingTest
Test starting: operationTimeoutTest
Description: Tests the the client handles lack of final responses gracefully.
Step: Set a 100 ms operation timeout.
Step: Start the operation
Stimuli: Calling getAuditTrails(null, null, null)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyContributorsForGetAuditTrailsRequest@10814a9[correlationID=01b68cac-085a-40eb-8ce7-4df536b619cb, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-AuditTrailClientUnderTest-cibuild01, from=operationTimeoutTest, to=<null>(default), version=31, minVersion=24, auditTrailInformation=<null>(default)]
Result: Received event: 01b68cac: GET_AUDIT_TRAILS: IDENTIFY_REQUEST_SENT: , Identifying contributers for audit trails
Step: Send positive responses from the pillar1 and a negative response from pillar2
Result: Received event: 01b68cac: GET_AUDIT_TRAILS: COMPONENT_IDENTIFIED: ContributorID Pillar1
Result: Received event: 01b68cac: GET_AUDIT_TRAILS: COMPONENT_FAILED: ContributorID Pillar2 ResponseCode: IDENTIFICATION_NEGATIVE
Result: Received event: 01b68cac: GET_AUDIT_TRAILS: IDENTIFICATION_COMPLETE: Contributors: [Pillar1]
Result: Received event: 01b68cac: GET_AUDIT_TRAILS: REQUEST_SENT: ContributorID [Pillar1], Sending request for audit trails
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.GetAuditTrailsRequest@602c9274[correlationID=01b68cac-085a-40eb-8ce7-4df536b619cb, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-AuditTrailClientUnderTest-cibuild01, from=operationTimeoutTest, to=<null>(default), version=31, minVersion=24, auditTrailInformation=<null>(default), contributor=Pillar1, fileID=<null>(default), minSequenceNumber=<null>(default), maxSequenceNumber=<null>(default), minTimestamp=<null>(default), maxTimestamp=<null>(default), maxNumberOfResults=<null>(default), resultAddress=<null>(default)]
Step: Wait for 1 second
Result: Received event: 01b68cac: GET_AUDIT_TRAILS: FAILED: , Failed to receive responses from all contributors before timeout(100ms). Missing contributors [Pillar1]
10:16:29.968 ERROR o.b.a.g.client.GettingAuditTrails - Failing conversation 'AuditTrailConversationContext{collectionID='TwoPillarCollection', conversationID='01b68cac-085a-40eb-8ce7-4df536b619cb', clientID='operationTimeoutTest', fileID='null', contributors=[Pillar1, Pillar2], monitor=ConversationEventMonitor{, collectionID='TwoPillarCollection', conversationID='01b68cac', operationType=GET_AUDIT_TRAILS, fileID='null', eventHandler=org.bitrepository.client.TestEventHandler@573b8d30, contributorCompleteEvents=[], contributorFailedEvents=[01b68cac: GET_AUDIT_TRAILS: COMPONENT_FAILED: ContributorID Pillar2 ResponseCode: IDENTIFICATION_NEGATIVE], failOnComponentFailure=true}, auditTrailInformation='null', state=org.bitrepository.client.conversation.FinishedState@52b77223, checksumPillars=[]}' with exception
org.bitrepository.common.exceptions.UnableToFinishException: Failed to receive responses from all contributors before timeout(100ms). Missing contributors [Pillar1]
at org.bitrepository.client.conversation.PerformingOperationState.logStateTimeout(PerformingOperationState.java:82)
at org.bitrepository.client.conversation.GeneralConversationState$TimeoutHandler.run(GeneralConversationState.java:133)
at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:511)
at java.util.concurrent.FutureTask.run(FutureTask.java:266)
at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.access$201(ScheduledThreadPoolExecutor.java:180)
at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.run(ScheduledThreadPoolExecutor.java:293)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1142)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:617)
at java.lang.Thread.run(Thread.java:745)
Test success: operationTimeoutTest
Starting testcase PutFileClientComponentTest
Test starting: defaultReturnChecksumsWithChecksumPillar
Description: Tests that PutClient handles the presence of a ChecksumPillar correctly, when a return checksum of default type is requested (which a checksum pillar can provide).
Step: Call putFile while requesting a salted checksum to be returned.
Stimuli: Calling PutFileWithId(file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, default-test-file.txt, 0, null, org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@6bc26806[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], org.bitrepository.client.TestEventHandler@328f03a7, TEST-AUDIT-TRAIL)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForPutFileRequest@b581459[correlationID=15ba2e48-ee1d-496c-b602-d4c2d411753c, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=defaultReturnChecksumsWithChecksumPillar, to=<null>(default), version=31, minVersion=24, auditTrailInformation=TEST-AUDIT-TRAIL, fileID=default-test-file.txt, fileSize=0]
Result: Received event: 15ba2e48: PUT_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for put file
Step: Send an identification response with a PillarChecksumSpec element set, indicating that this is a checksum pillar.
Result: Received event: 15ba2e48: PUT_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar1
Step: Send an normal identification response from pillar2.
Result: Received event: 15ba2e48: PUT_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar2
Result: Received event: 15ba2e48: PUT_FILE for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: [Pillar1, Pillar2]
Result: Received event: 15ba2e48: PUT_FILE for file default-test-file.txt: REQUEST_SENT: ContributorID [Pillar1, Pillar2], Sending request for put file
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.PutFileRequest@43564a63[correlationID=15ba2e48-ee1d-496c-b602-d4c2d411753c, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=defaultReturnChecksumsWithChecksumPillar, to=<null>(default), version=31, minVersion=24, auditTrailInformation=TEST-AUDIT-TRAIL, pillarID=Pillar1, fileID=default-test-file.txt, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, fileSize=0, checksumDataForNewFile=<null>(default), checksumRequestForNewFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@6bc26806[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)]]
Result: Received message on Pillar2_topic-cibuild01 : org.bitrepository.bitrepositorymessages.PutFileRequest@7319b3ec[correlationID=15ba2e48-ee1d-496c-b602-d4c2d411753c, collectionID=TwoPillarCollection, destination=Pillar2_topic-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=defaultReturnChecksumsWithChecksumPillar, to=<null>(default), version=31, minVersion=24, auditTrailInformation=TEST-AUDIT-TRAIL, pillarID=Pillar2, fileID=default-test-file.txt, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, fileSize=0, checksumDataForNewFile=<null>(default), checksumRequestForNewFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@6bc26806[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)]]
Test success: defaultReturnChecksumsWithChecksumPillar
Test starting: fileExistsOnPillarChecksumFromPillarNoClientChecksum
Description: Tests that PutClient handles the presence of a file correctly, when the pillar returns a checksum but the putFile was called without a checksum.
Step: Call putFile.
Stimuli: Calling PutFileWithId(file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, default-test-file.txt, 0, null, null, org.bitrepository.client.TestEventHandler@1d702079, TEST-AUDIT-TRAIL)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForPutFileRequest@416ce98e[correlationID=180e75fe-5190-4ed9-b73e-d96155fd6515, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=fileExistsOnPillarChecksumFromPillarNoClientChecksum, to=<null>(default), version=31, minVersion=24, auditTrailInformation=TEST-AUDIT-TRAIL, fileID=default-test-file.txt, fileSize=0]
Result: Received event: 180e75fe: PUT_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for put file
Step: Send a DUPLICATE_FILE_FAILURE response with a random checksum.
Result: Received event: 180e75fe: PUT_FILE for file default-test-file.txt: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: DUPLICATE_FILE_FAILURE, Received negative response from component Pillar1: org.bitrepository.bitrepositoryelements.ResponseInfo@6cd430e[responseCode=DUPLICATE_FILE_FAILURE, responseText=Testing the handling of 'DUPLICATE FILE' identification.] (existing file checksum does not match)
Result: Received event: 180e75fe: PUT_FILE for file default-test-file.txt: FAILED: , Can not put file default-test-file.txt, as an different file already exists on pillar Pillar1
10:16:30.215 ERROR o.b.m.p.c.IdentifyPillarsForPutFile - Failing conversation 'PutFileConversationContext{collectionID='TwoPillarCollection', conversationID='180e75fe-5190-4ed9-b73e-d96155fd6515', clientID='fileExistsOnPillarChecksumFromPillarNoClientChecksum', fileID='default-test-file.txt', contributors=[Pillar1, Pillar2], monitor=ConversationEventMonitor{, collectionID='TwoPillarCollection', conversationID='180e75fe', operationType=PUT_FILE, fileID='default-test-file.txt', eventHandler=org.bitrepository.client.TestEventHandler@1d702079, contributorCompleteEvents=[], contributorFailedEvents=[180e75fe: PUT_FILE for file default-test-file.txt: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: DUPLICATE_FILE_FAILURE, Received negative response from component Pillar1: org.bitrepository.bitrepositoryelements.ResponseInfo@6cd430e[responseCode=DUPLICATE_FILE_FAILURE, responseText=Testing the handling of 'DUPLICATE FILE' identification.] (existing file checksum does not match)], failOnComponentFailure=true}, auditTrailInformation='TEST-AUDIT-TRAIL', state=org.bitrepository.client.conversation.FinishedState@5d6ff676, checksumPillars=[]}' with exception
org.bitrepository.common.exceptions.UnableToFinishException: Can not put file default-test-file.txt, as an different file already exists on pillar Pillar1
at org.bitrepository.modify.putfile.conversation.IdentifyPillarsForPutFile.handleFailureResponse(IdentifyPillarsForPutFile.java:76)
at org.bitrepository.client.conversation.IdentifyingState.processMessage(IdentifyingState.java:60)
at org.bitrepository.client.conversation.GeneralConversationState.handleMessage(GeneralConversationState.java:110)
at org.bitrepository.client.conversation.StateBasedConversation.onMessage(StateBasedConversation.java:53)
at org.bitrepository.client.conversation.mediator.CollectionBasedConversationMediator.onMessage(CollectionBasedConversationMediator.java:136)
at org.bitrepository.protocol.messagebus.SimpleMessageBus.lambda$sendMessage$0(SimpleMessageBus.java:73)
at java.lang.Iterable.forEach(Iterable.java:75)
at org.bitrepository.protocol.messagebus.SimpleMessageBus.sendMessage(SimpleMessageBus.java:73)
at org.bitrepository.modify.putfile.PutFileClientComponentTest.fileExistsOnPillarChecksumFromPillarNoClientChecksum(PutFileClientComponentTest.java:492)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:498)
at org.testng.internal.MethodInvocationHelper.invokeMethod(MethodInvocationHelper.java:134)
at org.testng.internal.TestInvoker.invokeMethod(TestInvoker.java:597)
at org.testng.internal.TestInvoker.invokeTestMethod(TestInvoker.java:173)
at org.testng.internal.MethodRunner.runInSequence(MethodRunner.java:46)
at org.testng.internal.TestInvoker$MethodInvocationAgent.invoke(TestInvoker.java:816)
at org.testng.internal.TestInvoker.invokeTestMethods(TestInvoker.java:146)
at org.testng.internal.TestMethodWorker.invokeTestMethods(TestMethodWorker.java:146)
at org.testng.internal.TestMethodWorker.run(TestMethodWorker.java:128)
at java.util.ArrayList.forEach(ArrayList.java:1249)
at org.testng.TestRunner.privateRun(TestRunner.java:766)
at org.testng.TestRunner.run(TestRunner.java:587)
at org.testng.SuiteRunner.runTest(SuiteRunner.java:384)
at org.testng.SuiteRunner.runSequentially(SuiteRunner.java:378)
at org.testng.SuiteRunner.privateRun(SuiteRunner.java:337)
at org.testng.SuiteRunner.run(SuiteRunner.java:286)
at org.testng.SuiteRunnerWorker.runSuite(SuiteRunnerWorker.java:53)
at org.testng.SuiteRunnerWorker.run(SuiteRunnerWorker.java:96)
at org.testng.TestNG.runSuitesSequentially(TestNG.java:1187)
at org.testng.TestNG.runSuitesLocally(TestNG.java:1109)
at org.testng.TestNG.runSuites(TestNG.java:1039)
at org.testng.TestNG.run(TestNG.java:1007)
at org.apache.maven.surefire.testng.TestNGExecutor.run(TestNGExecutor.java:135)
at org.apache.maven.surefire.testng.TestNGDirectoryTestSuite.executeMulti(TestNGDirectoryTestSuite.java:193)
at org.apache.maven.surefire.testng.TestNGDirectoryTestSuite.execute(TestNGDirectoryTestSuite.java:94)
at org.apache.maven.surefire.testng.TestNGProvider.invoke(TestNGProvider.java:146)
at org.apache.maven.surefire.booter.ForkedBooter.runSuitesInProcess(ForkedBooter.java:377)
at org.apache.maven.surefire.booter.ForkedBooter.execute(ForkedBooter.java:138)
at org.apache.maven.surefire.booter.ForkedBooter.run(ForkedBooter.java:465)
at org.apache.maven.surefire.booter.ForkedBooter.main(ForkedBooter.java:451)
Test success: fileExistsOnPillarChecksumFromPillarNoClientChecksum
Test starting: fileExistsOnPillarDifferentChecksumFromPillar
Description: Tests that PutClient handles the presence of a file correctly, when the pillar returns a checksum different from the file being put.
Step: Call putFile.
Stimuli: Calling PutFileWithId(file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, default-test-file.txt, 0, org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@132db3a3[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@78e981e4[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], checksumValue={-70}, calculationTimestamp=2020-09-04T10:16:30.372+02:00], null, org.bitrepository.client.TestEventHandler@11478a2b, TEST-AUDIT-TRAIL)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForPutFileRequest@3d82bc46[correlationID=096fa0ba-c277-4f23-996f-d577e325d18f, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=fileExistsOnPillarDifferentChecksumFromPillar, to=<null>(default), version=31, minVersion=24, auditTrailInformation=TEST-AUDIT-TRAIL, fileID=default-test-file.txt, fileSize=0]
Result: Received event: 096fa0ba: PUT_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for put file
Step: Send a DUPLICATE_FILE_FAILURE response with a random checksum.
Result: Received event: 096fa0ba: PUT_FILE for file default-test-file.txt: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: DUPLICATE_FILE_FAILURE, Received negative response from component Pillar1: org.bitrepository.bitrepositoryelements.ResponseInfo@5aa525d8[responseCode=DUPLICATE_FILE_FAILURE, responseText=Testing the handling of 'DUPLICATE FILE' identification.] (existing file checksum does not match)
Result: Received event: 096fa0ba: PUT_FILE for file default-test-file.txt: FAILED: , Can not put file default-test-file.txt, as an different file already exists on pillar Pillar1
10:16:30.375 ERROR o.b.m.p.c.IdentifyPillarsForPutFile - Failing conversation 'PutFileConversationContext{collectionID='TwoPillarCollection', conversationID='096fa0ba-c277-4f23-996f-d577e325d18f', clientID='fileExistsOnPillarDifferentChecksumFromPillar', fileID='default-test-file.txt', contributors=[Pillar1, Pillar2], monitor=ConversationEventMonitor{, collectionID='TwoPillarCollection', conversationID='096fa0ba', operationType=PUT_FILE, fileID='default-test-file.txt', eventHandler=org.bitrepository.client.TestEventHandler@11478a2b, contributorCompleteEvents=[], contributorFailedEvents=[096fa0ba: PUT_FILE for file default-test-file.txt: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: DUPLICATE_FILE_FAILURE, Received negative response from component Pillar1: org.bitrepository.bitrepositoryelements.ResponseInfo@5aa525d8[responseCode=DUPLICATE_FILE_FAILURE, responseText=Testing the handling of 'DUPLICATE FILE' identification.] (existing file checksum does not match)], failOnComponentFailure=true}, auditTrailInformation='TEST-AUDIT-TRAIL', state=org.bitrepository.client.conversation.FinishedState@72edc246, checksumPillars=[]}' with exception
org.bitrepository.common.exceptions.UnableToFinishException: Can not put file default-test-file.txt, as an different file already exists on pillar Pillar1
at org.bitrepository.modify.putfile.conversation.IdentifyPillarsForPutFile.handleFailureResponse(IdentifyPillarsForPutFile.java:76)
at org.bitrepository.client.conversation.IdentifyingState.processMessage(IdentifyingState.java:60)
at org.bitrepository.client.conversation.GeneralConversationState.handleMessage(GeneralConversationState.java:110)
at org.bitrepository.client.conversation.StateBasedConversation.onMessage(StateBasedConversation.java:53)
at org.bitrepository.client.conversation.mediator.CollectionBasedConversationMediator.onMessage(CollectionBasedConversationMediator.java:136)
at org.bitrepository.protocol.messagebus.SimpleMessageBus.lambda$sendMessage$0(SimpleMessageBus.java:73)
at java.lang.Iterable.forEach(Iterable.java:75)
at org.bitrepository.protocol.messagebus.SimpleMessageBus.sendMessage(SimpleMessageBus.java:73)
at org.bitrepository.modify.putfile.PutFileClientComponentTest.fileExistsOnPillarDifferentChecksumFromPillar(PutFileClientComponentTest.java:401)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:498)
at org.testng.internal.MethodInvocationHelper.invokeMethod(MethodInvocationHelper.java:134)
at org.testng.internal.TestInvoker.invokeMethod(TestInvoker.java:597)
at org.testng.internal.TestInvoker.invokeTestMethod(TestInvoker.java:173)
at org.testng.internal.MethodRunner.runInSequence(MethodRunner.java:46)
at org.testng.internal.TestInvoker$MethodInvocationAgent.invoke(TestInvoker.java:816)
at org.testng.internal.TestInvoker.invokeTestMethods(TestInvoker.java:146)
at org.testng.internal.TestMethodWorker.invokeTestMethods(TestMethodWorker.java:146)
at org.testng.internal.TestMethodWorker.run(TestMethodWorker.java:128)
at java.util.ArrayList.forEach(ArrayList.java:1249)
at org.testng.TestRunner.privateRun(TestRunner.java:766)
at org.testng.TestRunner.run(TestRunner.java:587)
at org.testng.SuiteRunner.runTest(SuiteRunner.java:384)
at org.testng.SuiteRunner.runSequentially(SuiteRunner.java:378)
at org.testng.SuiteRunner.privateRun(SuiteRunner.java:337)
at org.testng.SuiteRunner.run(SuiteRunner.java:286)
at org.testng.SuiteRunnerWorker.runSuite(SuiteRunnerWorker.java:53)
at org.testng.SuiteRunnerWorker.run(SuiteRunnerWorker.java:96)
at org.testng.TestNG.runSuitesSequentially(TestNG.java:1187)
at org.testng.TestNG.runSuitesLocally(TestNG.java:1109)
at org.testng.TestNG.runSuites(TestNG.java:1039)
at org.testng.TestNG.run(TestNG.java:1007)
at org.apache.maven.surefire.testng.TestNGExecutor.run(TestNGExecutor.java:135)
at org.apache.maven.surefire.testng.TestNGDirectoryTestSuite.executeMulti(TestNGDirectoryTestSuite.java:193)
at org.apache.maven.surefire.testng.TestNGDirectoryTestSuite.execute(TestNGDirectoryTestSuite.java:94)
at org.apache.maven.surefire.testng.TestNGProvider.invoke(TestNGProvider.java:146)
at org.apache.maven.surefire.booter.ForkedBooter.runSuitesInProcess(ForkedBooter.java:377)
at org.apache.maven.surefire.booter.ForkedBooter.execute(ForkedBooter.java:138)
at org.apache.maven.surefire.booter.ForkedBooter.run(ForkedBooter.java:465)
at org.apache.maven.surefire.booter.ForkedBooter.main(ForkedBooter.java:451)
Test success: fileExistsOnPillarDifferentChecksumFromPillar
Test starting: fileExistsOnPillarNoChecksumFromPillar
Description: Tests that PutClient handles the presence of a file correctly, when the pillar doesn't return a checksum in the identification response.
Step: Call putFile.
Stimuli: Calling PutFileWithId(file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, default-test-file.txt, 0, null, null, org.bitrepository.client.TestEventHandler@10657d3d, TEST-AUDIT-TRAIL)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForPutFileRequest@33c9d9ad[correlationID=cf7348d2-faf5-4b31-8b10-fa2eb9716458, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=fileExistsOnPillarNoChecksumFromPillar, to=<null>(default), version=31, minVersion=24, auditTrailInformation=TEST-AUDIT-TRAIL, fileID=default-test-file.txt, fileSize=0]
Result: Received event: cf7348d2: PUT_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for put file
Step: Send a DUPLICATE_FILE_FAILURE response without a checksum.
Result: Received event: cf7348d2: PUT_FILE for file default-test-file.txt: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: DUPLICATE_FILE_FAILURE, Received negative response from component Pillar1: org.bitrepository.bitrepositoryelements.ResponseInfo@30fa0436[responseCode=DUPLICATE_FILE_FAILURE, responseText=Testing the handling of 'DUPLICATE FILE' identification.]
Result: Received event: cf7348d2: PUT_FILE for file default-test-file.txt: FAILED: , Can not put file default-test-file.txt, as an file already exists on pillar Pillar1
10:16:30.464 ERROR o.b.m.p.c.IdentifyPillarsForPutFile - Failing conversation 'PutFileConversationContext{collectionID='TwoPillarCollection', conversationID='cf7348d2-faf5-4b31-8b10-fa2eb9716458', clientID='fileExistsOnPillarNoChecksumFromPillar', fileID='default-test-file.txt', contributors=[Pillar1, Pillar2], monitor=ConversationEventMonitor{, collectionID='TwoPillarCollection', conversationID='cf7348d2', operationType=PUT_FILE, fileID='default-test-file.txt', eventHandler=org.bitrepository.client.TestEventHandler@10657d3d, contributorCompleteEvents=[], contributorFailedEvents=[cf7348d2: PUT_FILE for file default-test-file.txt: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: DUPLICATE_FILE_FAILURE, Received negative response from component Pillar1: org.bitrepository.bitrepositoryelements.ResponseInfo@30fa0436[responseCode=DUPLICATE_FILE_FAILURE, responseText=Testing the handling of 'DUPLICATE FILE' identification.]], failOnComponentFailure=true}, auditTrailInformation='TEST-AUDIT-TRAIL', state=org.bitrepository.client.conversation.FinishedState@27719e44, checksumPillars=[]}' with exception
org.bitrepository.common.exceptions.UnableToFinishException: Can not put file default-test-file.txt, as an file already exists on pillar Pillar1
at org.bitrepository.modify.putfile.conversation.IdentifyPillarsForPutFile.handleFailureResponse(IdentifyPillarsForPutFile.java:84)
at org.bitrepository.client.conversation.IdentifyingState.processMessage(IdentifyingState.java:60)
at org.bitrepository.client.conversation.GeneralConversationState.handleMessage(GeneralConversationState.java:110)
at org.bitrepository.client.conversation.StateBasedConversation.onMessage(StateBasedConversation.java:53)
at org.bitrepository.client.conversation.mediator.CollectionBasedConversationMediator.onMessage(CollectionBasedConversationMediator.java:136)
at org.bitrepository.protocol.messagebus.SimpleMessageBus.lambda$sendMessage$0(SimpleMessageBus.java:73)
at java.lang.Iterable.forEach(Iterable.java:75)
at org.bitrepository.protocol.messagebus.SimpleMessageBus.sendMessage(SimpleMessageBus.java:73)
at org.bitrepository.modify.putfile.PutFileClientComponentTest.fileExistsOnPillarNoChecksumFromPillar(PutFileClientComponentTest.java:363)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:498)
at org.testng.internal.MethodInvocationHelper.invokeMethod(MethodInvocationHelper.java:134)
at org.testng.internal.TestInvoker.invokeMethod(TestInvoker.java:597)
at org.testng.internal.TestInvoker.invokeTestMethod(TestInvoker.java:173)
at org.testng.internal.MethodRunner.runInSequence(MethodRunner.java:46)
at org.testng.internal.TestInvoker$MethodInvocationAgent.invoke(TestInvoker.java:816)
at org.testng.internal.TestInvoker.invokeTestMethods(TestInvoker.java:146)
at org.testng.internal.TestMethodWorker.invokeTestMethods(TestMethodWorker.java:146)
at org.testng.internal.TestMethodWorker.run(TestMethodWorker.java:128)
at java.util.ArrayList.forEach(ArrayList.java:1249)
at org.testng.TestRunner.privateRun(TestRunner.java:766)
at org.testng.TestRunner.run(TestRunner.java:587)
at org.testng.SuiteRunner.runTest(SuiteRunner.java:384)
at org.testng.SuiteRunner.runSequentially(SuiteRunner.java:378)
at org.testng.SuiteRunner.privateRun(SuiteRunner.java:337)
at org.testng.SuiteRunner.run(SuiteRunner.java:286)
at org.testng.SuiteRunnerWorker.runSuite(SuiteRunnerWorker.java:53)
at org.testng.SuiteRunnerWorker.run(SuiteRunnerWorker.java:96)
at org.testng.TestNG.runSuitesSequentially(TestNG.java:1187)
at org.testng.TestNG.runSuitesLocally(TestNG.java:1109)
at org.testng.TestNG.runSuites(TestNG.java:1039)
at org.testng.TestNG.run(TestNG.java:1007)
at org.apache.maven.surefire.testng.TestNGExecutor.run(TestNGExecutor.java:135)
at org.apache.maven.surefire.testng.TestNGDirectoryTestSuite.executeMulti(TestNGDirectoryTestSuite.java:193)
at org.apache.maven.surefire.testng.TestNGDirectoryTestSuite.execute(TestNGDirectoryTestSuite.java:94)
at org.apache.maven.surefire.testng.TestNGProvider.invoke(TestNGProvider.java:146)
at org.apache.maven.surefire.booter.ForkedBooter.runSuitesInProcess(ForkedBooter.java:377)
at org.apache.maven.surefire.booter.ForkedBooter.execute(ForkedBooter.java:138)
at org.apache.maven.surefire.booter.ForkedBooter.run(ForkedBooter.java:465)
at org.apache.maven.surefire.booter.ForkedBooter.main(ForkedBooter.java:451)
Test success: fileExistsOnPillarNoChecksumFromPillar
Test starting: noPillarsResponding
Description: Tests the handling of missing identification responses from all pillar
Added fixture: Sets the identification timeout to 100 ms.
Step: Request the putting of a file through the PutClient
Stimuli: Calling PutFileWithId(file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, default-test-file.txt, 0, null, null, org.bitrepository.client.TestEventHandler@6b5188cc, null)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForPutFileRequest@62514f38[correlationID=1344cb6f-3e97-4e6d-9f1d-f33a8cc167cc, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=noPillarsResponding, to=<null>(default), version=31, minVersion=24, auditTrailInformation=<null>(default), fileID=default-test-file.txt, fileSize=0]
Result: Received event: 1344cb6f: PUT_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for put file
Step: Do not respond. Just await the timeout.
Result: Received event: 1344cb6f: PUT_FILE for file default-test-file.txt: IDENTIFY_TIMEOUT: , Time has run out for looking up contributors
The following contributors didn't respond: [Pillar1, Pillar2]
Result: Received event: 1344cb6f: PUT_FILE for file default-test-file.txt: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: null, Timeout for identifying contributor
Result: Received event: 1344cb6f: PUT_FILE for file default-test-file.txt: COMPONENT_FAILED: ContributorID Pillar2 ResponseCode: null, Timeout for identifying contributor
Result: Received event: 1344cb6f: PUT_FILE for file default-test-file.txt: FAILED: , Unable to continue operation, contributors unavailable.
10:16:30.693 ERROR o.b.m.p.c.IdentifyPillarsForPutFile - Failing conversation 'PutFileConversationContext{collectionID='TwoPillarCollection', conversationID='1344cb6f-3e97-4e6d-9f1d-f33a8cc167cc', clientID='noPillarsResponding', fileID='default-test-file.txt', contributors=[Pillar1, Pillar2], monitor=ConversationEventMonitor{, collectionID='TwoPillarCollection', conversationID='1344cb6f', operationType=PUT_FILE, fileID='default-test-file.txt', eventHandler=org.bitrepository.client.TestEventHandler@6b5188cc, contributorCompleteEvents=[], contributorFailedEvents=[1344cb6f: PUT_FILE for file default-test-file.txt: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: null, Timeout for identifying contributor, 1344cb6f: PUT_FILE for file default-test-file.txt: COMPONENT_FAILED: ContributorID Pillar2 ResponseCode: null, Timeout for identifying contributor], failOnComponentFailure=true}, auditTrailInformation='null', state=org.bitrepository.client.conversation.FinishedState@47e30aac, checksumPillars=[]}' with exception
org.bitrepository.common.exceptions.UnableToFinishException: Unable to continue operation, contributors unavailable.
at org.bitrepository.client.conversation.IdentifyingState.completeState(IdentifyingState.java:76)
at org.bitrepository.client.conversation.GeneralConversationState.changeState(GeneralConversationState.java:147)
at org.bitrepository.client.conversation.GeneralConversationState.access$100(GeneralConversationState.java:48)
at org.bitrepository.client.conversation.GeneralConversationState$TimeoutHandler.run(GeneralConversationState.java:134)
at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:511)
at java.util.concurrent.FutureTask.run(FutureTask.java:266)
at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.access$201(ScheduledThreadPoolExecutor.java:180)
at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.run(ScheduledThreadPoolExecutor.java:293)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1142)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:617)
at java.lang.Thread.run(Thread.java:745)
Test success: noPillarsResponding
Test starting: noReturnChecksumsWithChecksumPillar
Description: Tests that PutClient handles the presence of a ChecksumPillar correctly, when no return checksum is requested.
Step: Call putFile while requesting a salted checksum to be returned.
Stimuli: Calling PutFileWithId(file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, default-test-file.txt, 0, null, null, org.bitrepository.client.TestEventHandler@4964f943, TEST-AUDIT-TRAIL)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForPutFileRequest@41fcb3ea[correlationID=05646fb3-27e8-4605-a9b0-d96625a66500, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=noReturnChecksumsWithChecksumPillar, to=<null>(default), version=31, minVersion=24, auditTrailInformation=TEST-AUDIT-TRAIL, fileID=default-test-file.txt, fileSize=0]
Result: Received event: 05646fb3: PUT_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for put file
Step: Send an identification response with a PillarChecksumSpec element set, indicating that this is a checksum pillar.
Result: Received event: 05646fb3: PUT_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar1
Step: Send an normal identification response from pillar2.
Result: Received event: 05646fb3: PUT_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar2
Result: Received event: 05646fb3: PUT_FILE for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: [Pillar1, Pillar2]
Result: Received event: 05646fb3: PUT_FILE for file default-test-file.txt: REQUEST_SENT: ContributorID [Pillar1, Pillar2], Sending request for put file
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.PutFileRequest@439c17ac[correlationID=05646fb3-27e8-4605-a9b0-d96625a66500, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=noReturnChecksumsWithChecksumPillar, to=<null>(default), version=31, minVersion=24, auditTrailInformation=TEST-AUDIT-TRAIL, pillarID=Pillar1, fileID=default-test-file.txt, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, fileSize=0, checksumDataForNewFile=<null>(default), checksumRequestForNewFile=<null>(default)]
Result: Received message on Pillar2_topic-cibuild01 : org.bitrepository.bitrepositorymessages.PutFileRequest@675b8fd6[correlationID=05646fb3-27e8-4605-a9b0-d96625a66500, collectionID=TwoPillarCollection, destination=Pillar2_topic-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=noReturnChecksumsWithChecksumPillar, to=<null>(default), version=31, minVersion=24, auditTrailInformation=TEST-AUDIT-TRAIL, pillarID=Pillar2, fileID=default-test-file.txt, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, fileSize=0, checksumDataForNewFile=<null>(default), checksumRequestForNewFile=<null>(default)]
Test success: noReturnChecksumsWithChecksumPillar
Test starting: normalPutFile
Description: Tests the PutClient. Makes a whole conversation for the put client for a 'good' scenario.
Added fixture: Initialise the number of pillars to one
Step: Ensure that the test-file is placed on the HTTP server.
Step: Request the delivery of a file from a specific pillar. A callback listener should be supplied.
Stimuli: Calling PutFileWithId(file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, default-test-file.txt, 0, null, null, org.bitrepository.client.TestEventHandler@36b79d2c, null)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForPutFileRequest@365f4009[correlationID=7fd20e3e-cfee-4ce0-982d-e9a34319caf3, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=normalPutFile, to=Pillar1, version=31, minVersion=24, auditTrailInformation=<null>(default), fileID=default-test-file.txt, fileSize=0]
Result: Received event: 7fd20e3e: PUT_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for put file
Step: Make response for the pillar.
Result: Received event: 7fd20e3e: PUT_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar1
Result: Received event: 7fd20e3e: PUT_FILE for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: [Pillar1]
Result: Received event: 7fd20e3e: PUT_FILE for file default-test-file.txt: REQUEST_SENT: ContributorID [Pillar1], Sending request for put file
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.PutFileRequest@617b2892[correlationID=7fd20e3e-cfee-4ce0-982d-e9a34319caf3, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=normalPutFile, to=Pillar1, version=31, minVersion=24, auditTrailInformation=<null>(default), pillarID=Pillar1, fileID=default-test-file.txt, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, fileSize=0, checksumDataForNewFile=<null>(default), checksumRequestForNewFile=<null>(default)]
Step: Validate the steps of the PutClient by going through the events.
Step: The pillar sends a progress response to the PutClient.
Result: Received event: 7fd20e3e: PUT_FILE for file default-test-file.txt: PROGRESS: ContributorID Pillar1, First test progress response message
Step: Send a final response message to the PutClient.
Result: Received event: 7fd20e3e: PUT_FILE for file default-test-file.txt: COMPONENT_COMPLETE: ContributorID Pillar1, requestedChecksumResult=null
Result: Received event: 7fd20e3e: PUT_FILE for file default-test-file.txt: COMPLETE:
Test success: normalPutFile
Test starting: onePillarPutRetryFailure
Reference: <a href=https://sbforge.org/jira/browse/BITMAG-810>BITMAG-810 Reference client should be able to retry failed file transfers</a>
Description: Tests that a putfile attempt failing due to FILE_TRANSFER_FAILURE is only attempted the maximum allowed attempts
Added fixture: Sets the identification timeout to 3 sec, allow two retries and only register one pillar.
Step: Request the putting of a file through the PutClient
Stimuli: Calling PutFileWithId(file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, default-test-file.txt, 0, null, null, org.bitrepository.client.TestEventHandler@2b7464a8, null)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForPutFileRequest@69ea4dc9[correlationID=b745f146-0bd6-4f6e-99ef-c039e57c1762, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=onePillarPutRetryFailure, to=Pillar1, version=31, minVersion=24, auditTrailInformation=<null>(default), fileID=default-test-file.txt, fileSize=0]
Result: Received event: b745f146: PUT_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for put file
Step: Send an identification response from the one pillar.
Result: Received event: b745f146: PUT_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar1
Result: Received event: b745f146: PUT_FILE for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: [Pillar1]
Result: Received event: b745f146: PUT_FILE for file default-test-file.txt: REQUEST_SENT: ContributorID [Pillar1], Sending request for put file
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.PutFileRequest@563f5e08[correlationID=b745f146-0bd6-4f6e-99ef-c039e57c1762, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=onePillarPutRetryFailure, to=Pillar1, version=31, minVersion=24, auditTrailInformation=<null>(default), pillarID=Pillar1, fileID=default-test-file.txt, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, fileSize=0, checksumDataForNewFile=<null>(default), checksumRequestForNewFile=<null>(default)]
Step: The client should proceed to send a putFileOperation request to the responding pillar.
Step: Send a PutFileFinalResponse indicating a FILE_TRANSFER_FAILURE
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.PutFileRequest@1e659086[correlationID=b745f146-0bd6-4f6e-99ef-c039e57c1762, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=onePillarPutRetryFailure, to=Pillar1, version=31, minVersion=24, auditTrailInformation=<null>(default), pillarID=Pillar1, fileID=default-test-file.txt, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, fileSize=0, checksumDataForNewFile=<null>(default), checksumRequestForNewFile=<null>(default)]
Result: Received event: b745f146: PUT_FILE for file default-test-file.txt: WARNING: ContributorID Pillar1, Retrying putfile (attempt number 2)
Step: Send a PutFileFinalResponse indicating a FILE_TRANSFER_FAILURE for the second put attempt
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.PutFileRequest@1e71c8ca[correlationID=b745f146-0bd6-4f6e-99ef-c039e57c1762, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=onePillarPutRetryFailure, to=Pillar1, version=31, minVersion=24, auditTrailInformation=<null>(default), pillarID=Pillar1, fileID=default-test-file.txt, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, fileSize=0, checksumDataForNewFile=<null>(default), checksumRequestForNewFile=<null>(default)]
Result: Received event: b745f146: PUT_FILE for file default-test-file.txt: WARNING: ContributorID Pillar1, Retrying putfile (attempt number 3)
Step: Send a PutFileFinalResponse indicating a FILE_TRANSFER_FAILURE for the third put attempt
Result: Received event: b745f146: PUT_FILE for file default-test-file.txt: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: FILE_TRANSFER_FAILURE
Result: Received event: b745f146: PUT_FILE for file default-test-file.txt: FAILED: , Failed operation. Cause(s):
[b745f146: PUT_FILE for file default-test-file.txt: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: FILE_TRANSFER_FAILURE]
Test success: onePillarPutRetryFailure
Test starting: onePillarPutRetrySuccess
Reference: <a href=https://sbforge.org/jira/browse/BITMAG-810>BITMAG-810 Reference client should be able to retry failed file transfers</a>
Description: Tests the handling of a failed transmission when retry is allowed
Added fixture: Sets the identification timeout to 3 sec, allow two retries and only register one pillar.
Step: Request the putting of a file through the PutClient
Stimuli: Calling PutFileWithId(file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, default-test-file.txt, 0, null, null, org.bitrepository.client.TestEventHandler@7f81499a, null)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForPutFileRequest@4e41441b[correlationID=d574de97-8e1d-4a66-b2e2-671bb9c018d7, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=onePillarPutRetrySuccess, to=Pillar1, version=31, minVersion=24, auditTrailInformation=<null>(default), fileID=default-test-file.txt, fileSize=0]
Result: Received event: d574de97: PUT_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for put file
Step: Send an identification response from the one pillar.
Result: Received event: d574de97: PUT_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar1
Result: Received event: d574de97: PUT_FILE for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: [Pillar1]
Result: Received event: d574de97: PUT_FILE for file default-test-file.txt: REQUEST_SENT: ContributorID [Pillar1], Sending request for put file
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.PutFileRequest@4a81c94b[correlationID=d574de97-8e1d-4a66-b2e2-671bb9c018d7, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=onePillarPutRetrySuccess, to=Pillar1, version=31, minVersion=24, auditTrailInformation=<null>(default), pillarID=Pillar1, fileID=default-test-file.txt, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, fileSize=0, checksumDataForNewFile=<null>(default), checksumRequestForNewFile=<null>(default)]
Step: The client should proceed to send a putFileOperation request to the responding pillar.
Step: Send a PutFileFinalResponse indicating a FILE_TRANSFER_FAILURE
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.PutFileRequest@3f398418[correlationID=d574de97-8e1d-4a66-b2e2-671bb9c018d7, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=onePillarPutRetrySuccess, to=Pillar1, version=31, minVersion=24, auditTrailInformation=<null>(default), pillarID=Pillar1, fileID=default-test-file.txt, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, fileSize=0, checksumDataForNewFile=<null>(default), checksumRequestForNewFile=<null>(default)]
Result: Received event: d574de97: PUT_FILE for file default-test-file.txt: WARNING: ContributorID Pillar1, Retrying putfile (attempt number 2)
Step: A new PutFileRequest is send, pillar responds with success
Result: Received event: d574de97: PUT_FILE for file default-test-file.txt: COMPONENT_COMPLETE: ContributorID Pillar1, requestedChecksumResult=null
Result: Received event: d574de97: PUT_FILE for file default-test-file.txt: COMPLETE:
Test success: onePillarPutRetrySuccess
Test starting: onePillarRespondingWithPartialPutAllowed
Reference: <a href=https://sbforge.org/jira/browse/BITMAG-598>BITMAG-598 It should be possible to putFiles, even though only a subset of the pillars are available</a>
Description: Tests the handling of missing identification responses from one pillar, when partial put are allowed
Added fixture: Sets the identification timeout to 100 ms and allow partial puts.
Step: Request the putting of a file through the PutClient
Stimuli: Calling PutFileWithId(file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, default-test-file.txt, 0, null, null, org.bitrepository.client.TestEventHandler@73d6b21, null)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForPutFileRequest@48a7777a[correlationID=389f7bc6-3a6f-4d52-a4e2-a4564236d1e5, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=onePillarRespondingWithPartialPutAllowed, to=<null>(default), version=31, minVersion=24, auditTrailInformation=<null>(default), fileID=default-test-file.txt, fileSize=0]
Result: Received event: 389f7bc6: PUT_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for put file
Step: Only send an identification response from one pillar.
Result: Received event: 389f7bc6: PUT_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar1
Step: Await the timeout.
Result: Received event: 389f7bc6: PUT_FILE for file default-test-file.txt: IDENTIFY_TIMEOUT: , Time has run out for looking up contributors
The following contributors didn't respond: [Pillar2]
Result: Received event: 389f7bc6: PUT_FILE for file default-test-file.txt: COMPONENT_FAILED: ContributorID Pillar2 ResponseCode: null, Timeout for identifying contributor
Result: Received event: 389f7bc6: PUT_FILE for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: [Pillar1]
Result: Received event: 389f7bc6: PUT_FILE for file default-test-file.txt: REQUEST_SENT: ContributorID [Pillar1], Sending request for put file
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.PutFileRequest@35a7cc97[correlationID=389f7bc6-3a6f-4d52-a4e2-a4564236d1e5, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=onePillarRespondingWithPartialPutAllowed, to=<null>(default), version=31, minVersion=24, auditTrailInformation=<null>(default), pillarID=Pillar1, fileID=default-test-file.txt, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, fileSize=0, checksumDataForNewFile=<null>(default), checksumRequestForNewFile=<null>(default)]
Step: The client should proceed to send a putFileOperation request to the responding pillar.
Step: Send a pillar complete event
Result: Received event: 389f7bc6: PUT_FILE for file default-test-file.txt: COMPONENT_COMPLETE: ContributorID Pillar1, requestedChecksumResult=null
Result: Received event: 389f7bc6: PUT_FILE for file default-test-file.txt: FAILED: , Failed operation. Cause(s):
[389f7bc6: PUT_FILE for file default-test-file.txt: COMPONENT_FAILED: ContributorID Pillar2 ResponseCode: null, Timeout for identifying contributor]
Test success: onePillarRespondingWithPartialPutAllowed
Test starting: onePillarRespondingWithPartialPutDisallowed
Description: Tests the handling of missing identification responses from one pillar, when partial put are allowed
Added fixture: Sets the identification timeout to 100 ms and disallow partial puts.
Step: Request the putting of a file through the PutClient
Stimuli: Calling PutFileWithId(file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, default-test-file.txt, 0, null, null, org.bitrepository.client.TestEventHandler@5e5fd45, null)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForPutFileRequest@1cd0b6c1[correlationID=7be9fcda-e1f4-4232-8436-81172f92012b, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=onePillarRespondingWithPartialPutDisallowed, to=<null>(default), version=31, minVersion=24, auditTrailInformation=<null>(default), fileID=default-test-file.txt, fileSize=0]
Result: Received event: 7be9fcda: PUT_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for put file
Step: Only send an identification response from one pillar.
Result: Received event: 7be9fcda: PUT_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar1
Step: Await the timeout.
Result: Received event: 7be9fcda: PUT_FILE for file default-test-file.txt: IDENTIFY_TIMEOUT: , Time has run out for looking up contributors
The following contributors didn't respond: [Pillar2]
Result: Received event: 7be9fcda: PUT_FILE for file default-test-file.txt: COMPONENT_FAILED: ContributorID Pillar2 ResponseCode: null, Timeout for identifying contributor
Result: Received event: 7be9fcda: PUT_FILE for file default-test-file.txt: FAILED: , Unable to continue operation, contributors unavailable.
10:16:31.507 ERROR o.b.m.p.c.IdentifyPillarsForPutFile - Failing conversation 'PutFileConversationContext{collectionID='TwoPillarCollection', conversationID='7be9fcda-e1f4-4232-8436-81172f92012b', clientID='onePillarRespondingWithPartialPutDisallowed', fileID='default-test-file.txt', contributors=[Pillar1, Pillar2], monitor=ConversationEventMonitor{, collectionID='TwoPillarCollection', conversationID='7be9fcda', operationType=PUT_FILE, fileID='default-test-file.txt', eventHandler=org.bitrepository.client.TestEventHandler@5e5fd45, contributorCompleteEvents=[], contributorFailedEvents=[7be9fcda: PUT_FILE for file default-test-file.txt: COMPONENT_FAILED: ContributorID Pillar2 ResponseCode: null, Timeout for identifying contributor], failOnComponentFailure=true}, auditTrailInformation='null', state=org.bitrepository.client.conversation.FinishedState@1dd03bae, checksumPillars=[]}' with exception
org.bitrepository.common.exceptions.UnableToFinishException: Unable to continue operation, contributors unavailable.
at org.bitrepository.client.conversation.IdentifyingState.completeState(IdentifyingState.java:76)
at org.bitrepository.client.conversation.GeneralConversationState.changeState(GeneralConversationState.java:147)
at org.bitrepository.client.conversation.GeneralConversationState.access$100(GeneralConversationState.java:48)
at org.bitrepository.client.conversation.GeneralConversationState$TimeoutHandler.run(GeneralConversationState.java:134)
at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:511)
at java.util.concurrent.FutureTask.run(FutureTask.java:266)
at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.access$201(ScheduledThreadPoolExecutor.java:180)
at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.run(ScheduledThreadPoolExecutor.java:293)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1142)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:617)
at java.lang.Thread.run(Thread.java:745)
Test success: onePillarRespondingWithPartialPutDisallowed
Test starting: putClientOperationTimeout
Description: Tests the handling of a failed operation for the PutClient
Step: Initialise the number of pillars and the PutClient. Sets the operation timeout to 100 ms.
Step: Request the putting of a file through the PutClient
Stimuli: Calling PutFileWithId(file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, default-test-file.txt, 0, null, null, org.bitrepository.client.TestEventHandler@6d1867f9, null)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForPutFileRequest@58b36cce[correlationID=79b93ca3-e5e4-4864-a158-624aea129938, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=putClientOperationTimeout, to=Pillar1, version=31, minVersion=24, auditTrailInformation=<null>(default), fileID=default-test-file.txt, fileSize=0]
Result: Received event: 79b93ca3: PUT_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for put file
Step: Make response for the pillar.
Result: Received event: 79b93ca3: PUT_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar1
Result: Received event: 79b93ca3: PUT_FILE for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: [Pillar1]
Result: Received event: 79b93ca3: PUT_FILE for file default-test-file.txt: REQUEST_SENT: ContributorID [Pillar1], Sending request for put file
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.PutFileRequest@5f549033[correlationID=79b93ca3-e5e4-4864-a158-624aea129938, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=putClientOperationTimeout, to=Pillar1, version=31, minVersion=24, auditTrailInformation=<null>(default), pillarID=Pillar1, fileID=default-test-file.txt, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, fileSize=0, checksumDataForNewFile=<null>(default), checksumRequestForNewFile=<null>(default)]
Step: Validate the steps of the PutClient by going through the events.
Step: Do not respond. Just await the timeout.
Result: Received event: 79b93ca3: PUT_FILE for file default-test-file.txt: FAILED: , Failed to receive responses from all contributors before timeout(100ms). Missing contributors [Pillar1]
10:16:31.732 ERROR o.b.m.p.conversation.PuttingFile - Failing conversation 'PutFileConversationContext{collectionID='TwoPillarCollection', conversationID='79b93ca3-e5e4-4864-a158-624aea129938', clientID='putClientOperationTimeout', fileID='default-test-file.txt', contributors=[Pillar1], monitor=ConversationEventMonitor{, collectionID='TwoPillarCollection', conversationID='79b93ca3', operationType=PUT_FILE, fileID='default-test-file.txt', eventHandler=org.bitrepository.client.TestEventHandler@6d1867f9, contributorCompleteEvents=[], contributorFailedEvents=[], failOnComponentFailure=true}, auditTrailInformation='null', state=org.bitrepository.client.conversation.FinishedState@749f645d, checksumPillars=[]}' with exception
org.bitrepository.common.exceptions.UnableToFinishException: Failed to receive responses from all contributors before timeout(100ms). Missing contributors [Pillar1]
at org.bitrepository.client.conversation.PerformingOperationState.logStateTimeout(PerformingOperationState.java:82)
at org.bitrepository.client.conversation.GeneralConversationState$TimeoutHandler.run(GeneralConversationState.java:133)
at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:511)
at java.util.concurrent.FutureTask.run(FutureTask.java:266)
at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.access$201(ScheduledThreadPoolExecutor.java:180)
at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.run(ScheduledThreadPoolExecutor.java:293)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1142)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:617)
at java.lang.Thread.run(Thread.java:745)
Test success: putClientOperationTimeout
Test starting: putClientPillarOperationFailed
Description: Tests the handling of a operation failure for the PutClient.
Step: Initialise the number of pillars to one
Step: Ensure that the test-file is placed on the HTTP server.
Step: Request the delivery of a file from a specific pillar. A callback listener should be supplied.
Stimuli: Calling PutFileWithId(file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, default-test-file.txt, 0, null, null, org.bitrepository.client.TestEventHandler@3de1c3be, TEST-AUDIT-TRAIL)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForPutFileRequest@6e7813d7[correlationID=984d4240-9048-438b-a247-c81085a0e8e0, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=putClientPillarOperationFailed, to=Pillar1, version=31, minVersion=24, auditTrailInformation=TEST-AUDIT-TRAIL, fileID=default-test-file.txt, fileSize=0]
Result: Received event: 984d4240: PUT_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for put file
Step: Send pillar response.
Result: Received event: 984d4240: PUT_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar1
Result: Received event: 984d4240: PUT_FILE for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: [Pillar1]
Result: Received event: 984d4240: PUT_FILE for file default-test-file.txt: REQUEST_SENT: ContributorID [Pillar1], Sending request for put file
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.PutFileRequest@217c4aef[correlationID=984d4240-9048-438b-a247-c81085a0e8e0, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=putClientPillarOperationFailed, to=Pillar1, version=31, minVersion=24, auditTrailInformation=TEST-AUDIT-TRAIL, pillarID=Pillar1, fileID=default-test-file.txt, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, fileSize=0, checksumDataForNewFile=<null>(default), checksumRequestForNewFile=<null>(default)]
Step: Validate the steps of the PutClient by going through the events.
Step: Send a failed response message to the PutClient.
Result: Received event: 984d4240: PUT_FILE for file default-test-file.txt: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: FAILURE, Verifying that a failure can be understood!
Result: Received event: 984d4240: PUT_FILE for file default-test-file.txt: FAILED: , Failed operation. Cause(s):
[984d4240: PUT_FILE for file default-test-file.txt: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: FAILURE, Verifying that a failure can be understood!]
Test success: putClientPillarOperationFailed
Test starting: putToOtherCollection
Reference: <a href=https://sbforge.org/jira/browse/BITMAG-925>BITMAG-925 Client will always try to put to the pillars defined in the first collection</a>
Description: Tests the putFIle client will correctly try to put to a second collection if required
Added fixture: Sets the identification timeout to 3 sec, allow two retries and only register one pillar.
Added fixture: Configure collection1 to contain both pillars and collection 2 to only contain pillar2
Step: Request the putting of a file through the PutClient for collection2
Stimuli: Calling PutFileWithId(file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, default-test-file.txt, 0, null, null, org.bitrepository.client.TestEventHandler@7a4db9bc, null)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForPutFileRequest@66b856a4[correlationID=1b3f4022-e742-4b11-922f-a0dc09fcb861, collectionID=SinglePillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=putToOtherCollection, to=Pillar2, version=31, minVersion=24, auditTrailInformation=<null>(default), fileID=default-test-file.txt, fileSize=0]
Result: Received event: 1b3f4022: PUT_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for put file
Step: Send an identification response from pillar2.
Result: Received event: 1b3f4022: PUT_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar2
Result: Received event: 1b3f4022: PUT_FILE for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: [Pillar2]
Result: Received event: 1b3f4022: PUT_FILE for file default-test-file.txt: REQUEST_SENT: ContributorID [Pillar2], Sending request for put file
Result: Received message on Pillar2_topic-cibuild01 : org.bitrepository.bitrepositorymessages.PutFileRequest@7a3193b8[correlationID=1b3f4022-e742-4b11-922f-a0dc09fcb861, collectionID=SinglePillarCollection, destination=Pillar2_topic-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=putToOtherCollection, to=Pillar2, version=31, minVersion=24, auditTrailInformation=<null>(default), pillarID=Pillar2, fileID=default-test-file.txt, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, fileSize=0, checksumDataForNewFile=<null>(default), checksumRequestForNewFile=<null>(default)]
Step: Send a put complete event from the pillar
Result: Received event: 1b3f4022: PUT_FILE for file default-test-file.txt: COMPONENT_COMPLETE: ContributorID Pillar2, requestedChecksumResult=null
Result: Received event: 1b3f4022: PUT_FILE for file default-test-file.txt: COMPLETE:
Test success: putToOtherCollection
Test starting: saltedReturnChecksumsWithChecksumPillar
Description: Tests that PutClient handles the presence of a ChecksumPillar correctly, when a salted return checksum (which a checksum pillar can't provide) is requested.
Reference: <a href="https://sbforge.org/jira/browse/BITMAG-677">BITMAG-677put, replace and delete clients fails if return checksums are requested and a checksumpillar is involved</a>
Step: Call putFile while requesting a salted checksum to be returned.
Stimuli: Calling PutFileWithId(file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, default-test-file.txt, 0, null, org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@5162bf3[checksumType=HMAC_MD5, checksumSalt={-86}, otherChecksumType=<null>(default)], org.bitrepository.client.TestEventHandler@175ff045, TEST-AUDIT-TRAIL)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForPutFileRequest@13ebfbd3[correlationID=bd8669f2-0a02-4bf5-8f34-93c96b423071, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=saltedReturnChecksumsWithChecksumPillar, to=<null>(default), version=31, minVersion=24, auditTrailInformation=TEST-AUDIT-TRAIL, fileID=default-test-file.txt, fileSize=0]
Result: Received event: bd8669f2: PUT_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for put file
Step: Send an identification response with a PillarChecksumSpec element set, indicating that this is a checksum pillar.
Result: Received event: bd8669f2: PUT_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar1
Step: Send an normal identification response from pillar2.
Result: Received event: bd8669f2: PUT_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar2
Result: Received event: bd8669f2: PUT_FILE for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: [Pillar1, Pillar2]
Result: Received event: bd8669f2: PUT_FILE for file default-test-file.txt: REQUEST_SENT: ContributorID [Pillar1, Pillar2], Sending request for put file
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.PutFileRequest@1c501d38[correlationID=bd8669f2-0a02-4bf5-8f34-93c96b423071, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=saltedReturnChecksumsWithChecksumPillar, to=<null>(default), version=31, minVersion=24, auditTrailInformation=TEST-AUDIT-TRAIL, pillarID=Pillar1, fileID=default-test-file.txt, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, fileSize=0, checksumDataForNewFile=<null>(default), checksumRequestForNewFile=<null>(default)]
Result: Received message on Pillar2_topic-cibuild01 : org.bitrepository.bitrepositorymessages.PutFileRequest@cd3ea35[correlationID=bd8669f2-0a02-4bf5-8f34-93c96b423071, collectionID=TwoPillarCollection, destination=Pillar2_topic-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=saltedReturnChecksumsWithChecksumPillar, to=<null>(default), version=31, minVersion=24, auditTrailInformation=TEST-AUDIT-TRAIL, pillarID=Pillar2, fileID=default-test-file.txt, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, fileSize=0, checksumDataForNewFile=<null>(default), checksumRequestForNewFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@5162bf3[checksumType=HMAC_MD5, checksumSalt={-86}, otherChecksumType=<null>(default)]]
Test success: saltedReturnChecksumsWithChecksumPillar
Test starting: sameFileExistsOnOnePillar
Description: Tests that PutClient handles the presence of a file correctly, when the pillar returns a checksum equal the file being put (idempotent).
Step: Call putFile.
Stimuli: Calling PutFileWithId(file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, default-test-file.txt, 0, org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@7807688e[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@161e86db[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], checksumValue={-108,10,81,-78,80,-25,-86,-126,-40,-24,-22,49,33,127,-14,103}, calculationTimestamp=2020-09-04T10:16:32.288+02:00], null, org.bitrepository.client.TestEventHandler@247cc879, TEST-AUDIT-TRAIL)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForPutFileRequest@2b601535[correlationID=1a6ccbe1-472c-4ce2-9d46-de94387ab233, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=sameFileExistsOnOnePillar, to=<null>(default), version=31, minVersion=24, auditTrailInformation=TEST-AUDIT-TRAIL, fileID=default-test-file.txt, fileSize=0]
Result: Received event: 1a6ccbe1: PUT_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for put file
Step: Send a DUPLICATE_FILE_FAILURE response with a checksum equal to the one supplied to the client.
Result: Received event: 1a6ccbe1: PUT_FILE for file default-test-file.txt: COMPONENT_COMPLETE: ContributorID Pillar1, requestedChecksumResult=org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@48d71e6a[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@633573f8[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], checksumValue={-108,10,81,-78,80,-25,-86,-126,-40,-24,-22,49,33,127,-14,103}, calculationTimestamp=2020-09-04T10:16:32.291+02:00], File already existed on Pillar1
Step: Send an identification response from the second pillar.
Result: Received event: 1a6ccbe1: PUT_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar2
Result: Received event: 1a6ccbe1: PUT_FILE for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: [Pillar2]
Result: Received event: 1a6ccbe1: PUT_FILE for file default-test-file.txt: REQUEST_SENT: ContributorID [Pillar2], Sending request for put file
Result: Received message on Pillar2_topic-cibuild01 : org.bitrepository.bitrepositorymessages.PutFileRequest@52125b88[correlationID=1a6ccbe1-472c-4ce2-9d46-de94387ab233, collectionID=TwoPillarCollection, destination=Pillar2_topic-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=sameFileExistsOnOnePillar, to=<null>(default), version=31, minVersion=24, auditTrailInformation=TEST-AUDIT-TRAIL, pillarID=Pillar2, fileID=default-test-file.txt, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, fileSize=0, checksumDataForNewFile=org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@7807688e[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@161e86db[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], checksumValue={-108,10,81,-78,80,-25,-86,-126,-40,-24,-22,49,33,127,-14,103}, calculationTimestamp=2020-09-04T10:16:32.288+02:00], checksumRequestForNewFile=<null>(default)]
Step: The client should proceed to send a putFileOperation request to the second pillar.
Step: Send a pillar complete event
Result: Received event: 1a6ccbe1: PUT_FILE for file default-test-file.txt: COMPONENT_COMPLETE: ContributorID Pillar2, requestedChecksumResult=null
Result: Received event: 1a6ccbe1: PUT_FILE for file default-test-file.txt: COMPLETE:
Test success: sameFileExistsOnOnePillar
Test starting: verifyPutClientFromFactory
Description: Testing the initialization through the ModifyComponentFactory.
Step: Use the ModifyComponentFactory to instantiate a PutFileClient.
Test success: verifyPutClientFromFactory
Starting testcase ReplaceFileClientComponentTest
Test starting: replaceClientIdentificationTimeout
Description: Tests the handling of a failed identification for the ReplaceClient
Step: Initialise the number of pillars and the DeleteClient. Sets the identification timeout to 100 ms.
Step: Request a file to be replaced on the default pillar.
Stimuli: replaceFile(default-test-file.txt, Pillar1, org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@2593b357[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@6407ed17[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], checksumValue={49,50,51,99,104,101,99,107,115,117,109,51,50,49}, calculationTimestamp=1970-01-01T01:00:00.000+01:00], org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@39f4aa2b[checksumType=SHA1, checksumSalt=<null>(default), otherChecksumType=<null>(default)], file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, 10, org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@5f960fa[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@6407ed17[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], checksumValue={49,50,51,99,104,101,99,107,115,117,109,51,50,49}, calculationTimestamp=1970-01-01T01:00:00.000+01:00], org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@39f4aa2b[checksumType=SHA1, checksumSalt=<null>(default), otherChecksumType=<null>(default)], org.bitrepository.client.TestEventHandler@3dc86219, null
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForReplaceFileRequest@47505eae[correlationID=b89306da-3776-4694-aabb-5b9f09323941, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-ReplaceFileClientComponentTest-cibuild01, from=replaceClientIdentificationTimeout, to=Pillar1, version=31, minVersion=24, auditTrailInformation=<null>(default), fileID=default-test-file.txt, fileSize=<null>(default)]
Result: Received event: b89306da: REPLACE_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for replace file
Step: Do not respond. Just await the timeout.
Result: Received event: b89306da: REPLACE_FILE for file default-test-file.txt: IDENTIFY_TIMEOUT: , Time has run out for looking up contributors
The following contributors didn't respond: [Pillar1]
Result: Received event: b89306da: REPLACE_FILE for file default-test-file.txt: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: null, Timeout for identifying contributor
Result: Received event: b89306da: REPLACE_FILE for file default-test-file.txt: FAILED: , Unable to continue operation, contributors unavailable.
10:16:32.602 ERROR o.b.m.r.c.IdentifyPillarsForReplaceFile - Failing conversation 'ReplaceFileConversationContext{collectionID='TwoPillarCollection', conversationID='b89306da-3776-4694-aabb-5b9f09323941', clientID='replaceClientIdentificationTimeout', fileID='default-test-file.txt', contributors=[Pillar1], monitor=ConversationEventMonitor{, collectionID='TwoPillarCollection', conversationID='b89306da', operationType=REPLACE_FILE, fileID='default-test-file.txt', eventHandler=org.bitrepository.client.TestEventHandler@3dc86219, contributorCompleteEvents=[], contributorFailedEvents=[b89306da: REPLACE_FILE for file default-test-file.txt: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: null, Timeout for identifying contributor], failOnComponentFailure=true}, auditTrailInformation='null', state=org.bitrepository.client.conversation.FinishedState@2b76a608, checksumPillars=[]}' with exception
org.bitrepository.common.exceptions.UnableToFinishException: Unable to continue operation, contributors unavailable.
at org.bitrepository.client.conversation.IdentifyingState.completeState(IdentifyingState.java:76)
at org.bitrepository.client.conversation.GeneralConversationState.changeState(GeneralConversationState.java:147)
at org.bitrepository.client.conversation.GeneralConversationState.access$100(GeneralConversationState.java:48)
at org.bitrepository.client.conversation.GeneralConversationState$TimeoutHandler.run(GeneralConversationState.java:134)
at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:511)
at java.util.concurrent.FutureTask.run(FutureTask.java:266)
at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.access$201(ScheduledThreadPoolExecutor.java:180)
at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.run(ScheduledThreadPoolExecutor.java:293)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1142)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:617)
at java.lang.Thread.run(Thread.java:745)
Test success: replaceClientIdentificationTimeout
Test starting: replaceClientOperationTimeout
Description: Tests the handling of a failed operation for the ReplaceClient
Step: Initialise the number of pillars and the DeleteClient. Sets the operation timeout to 100 ms.
Step: Request a file to be replaced on the default pillar.
Stimuli: replaceFile(default-test-file.txt, Pillar1, org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@38cd1bda[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@27785213[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], checksumValue={49,50,51,99,104,101,99,107,115,117,109,51,50,49}, calculationTimestamp=1970-01-01T01:00:00.000+01:00], org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@dd58245[checksumType=SHA1, checksumSalt=<null>(default), otherChecksumType=<null>(default)], file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, 10, org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@48930622[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@27785213[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], checksumValue={49,50,51,99,104,101,99,107,115,117,109,51,50,49}, calculationTimestamp=1970-01-01T01:00:00.000+01:00], org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@dd58245[checksumType=SHA1, checksumSalt=<null>(default), otherChecksumType=<null>(default)], org.bitrepository.client.TestEventHandler@18d0d721, null
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForReplaceFileRequest@7d5df6e2[correlationID=f3509543-9587-45b5-968c-ee4e1e97e1e2, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-ReplaceFileClientComponentTest-cibuild01, from=replaceClientOperationTimeout, to=Pillar1, version=31, minVersion=24, auditTrailInformation=<null>(default), fileID=default-test-file.txt, fileSize=<null>(default)]
Result: Received event: f3509543: REPLACE_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for replace file
Step: Make response for the pillar.
Result: Received event: f3509543: REPLACE_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar1
Result: Received event: f3509543: REPLACE_FILE for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: [Pillar1]
Result: Received event: f3509543: REPLACE_FILE for file default-test-file.txt: REQUEST_SENT: ContributorID [Pillar1], Sending request for replace file
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.ReplaceFileRequest@12be8c62[correlationID=f3509543-9587-45b5-968c-ee4e1e97e1e2, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-ReplaceFileClientComponentTest-cibuild01, from=replaceClientOperationTimeout, to=Pillar1, version=31, minVersion=24, auditTrailInformation=<null>(default), pillarID=Pillar1, fileID=default-test-file.txt, checksumDataForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@38cd1bda[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@27785213[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], checksumValue={49,50,51,99,104,101,99,107,115,117,109,51,50,49}, calculationTimestamp=1970-01-01T01:00:00.000+01:00], checksumRequestForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@dd58245[checksumType=SHA1, checksumSalt=<null>(default), otherChecksumType=<null>(default)], fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, fileSize=10, checksumDataForNewFile=org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@48930622[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@27785213[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], checksumValue={49,50,51,99,104,101,99,107,115,117,109,51,50,49}, calculationTimestamp=1970-01-01T01:00:00.000+01:00], checksumRequestForNewFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@dd58245[checksumType=SHA1, checksumSalt=<null>(default), otherChecksumType=<null>(default)]]
Step: Validate the steps of the ReplaceClient by going through the events.
Step: Do not respond. Just await the timeout.
Result: Received event: f3509543: REPLACE_FILE for file default-test-file.txt: FAILED: , Failed to receive responses from all contributors before timeout(100ms). Missing contributors [Pillar1]
10:16:32.842 ERROR o.b.m.r.conversation.ReplacingFile - Failing conversation 'ReplaceFileConversationContext{collectionID='TwoPillarCollection', conversationID='f3509543-9587-45b5-968c-ee4e1e97e1e2', clientID='replaceClientOperationTimeout', fileID='default-test-file.txt', contributors=[Pillar1], monitor=ConversationEventMonitor{, collectionID='TwoPillarCollection', conversationID='f3509543', operationType=REPLACE_FILE, fileID='default-test-file.txt', eventHandler=org.bitrepository.client.TestEventHandler@18d0d721, contributorCompleteEvents=[], contributorFailedEvents=[], failOnComponentFailure=true}, auditTrailInformation='null', state=org.bitrepository.client.conversation.FinishedState@203e0485, checksumPillars=[]}' with exception
org.bitrepository.common.exceptions.UnableToFinishException: Failed to receive responses from all contributors before timeout(100ms). Missing contributors [Pillar1]
at org.bitrepository.client.conversation.PerformingOperationState.logStateTimeout(PerformingOperationState.java:82)
at org.bitrepository.client.conversation.GeneralConversationState$TimeoutHandler.run(GeneralConversationState.java:133)
at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:511)
at java.util.concurrent.FutureTask.run(FutureTask.java:266)
at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.access$201(ScheduledThreadPoolExecutor.java:180)
at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.run(ScheduledThreadPoolExecutor.java:293)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1142)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:617)
at java.lang.Thread.run(Thread.java:745)
Test success: replaceClientOperationTimeout
Test starting: replaceClientPillarFailed
Description: Tests the handling of a operation failure for the ReplaceClient.
Step: Initialise the number of pillars to one
Step: Request a file to be replaced on the default pillar.
Stimuli: replaceFile(default-test-file.txt, Pillar1, org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@2b980d86[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@696552a4[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], checksumValue={49,50,51,99,104,101,99,107,115,117,109,51,50,49}, calculationTimestamp=1970-01-01T01:00:00.000+01:00], org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@191407f1[checksumType=SHA1, checksumSalt=<null>(default), otherChecksumType=<null>(default)], file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, 0, org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@75622941[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@696552a4[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], checksumValue={49,50,51,99,104,101,99,107,115,117,109,51,50,49}, calculationTimestamp=1970-01-01T01:00:00.000+01:00], org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@191407f1[checksumType=SHA1, checksumSalt=<null>(default), otherChecksumType=<null>(default)], org.bitrepository.client.TestEventHandler@1e7dee56, null
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForReplaceFileRequest@5d4e7f4f[correlationID=f4d429e3-6a0d-4117-9442-4e7ca1dc3d4f, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-ReplaceFileClientComponentTest-cibuild01, from=replaceClientPillarFailed, to=Pillar1, version=31, minVersion=24, auditTrailInformation=<null>(default), fileID=default-test-file.txt, fileSize=<null>(default)]
Result: Received event: f4d429e3: REPLACE_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for replace file
Step: Make response for the pillar.
Result: Received event: f4d429e3: REPLACE_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar1
Result: Received event: f4d429e3: REPLACE_FILE for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: [Pillar1]
Result: Received event: f4d429e3: REPLACE_FILE for file default-test-file.txt: REQUEST_SENT: ContributorID [Pillar1], Sending request for replace file
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.ReplaceFileRequest@90c563[correlationID=f4d429e3-6a0d-4117-9442-4e7ca1dc3d4f, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-ReplaceFileClientComponentTest-cibuild01, from=replaceClientPillarFailed, to=Pillar1, version=31, minVersion=24, auditTrailInformation=<null>(default), pillarID=Pillar1, fileID=default-test-file.txt, checksumDataForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@2b980d86[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@696552a4[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], checksumValue={49,50,51,99,104,101,99,107,115,117,109,51,50,49}, calculationTimestamp=1970-01-01T01:00:00.000+01:00], checksumRequestForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@191407f1[checksumType=SHA1, checksumSalt=<null>(default), otherChecksumType=<null>(default)], fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, fileSize=0, checksumDataForNewFile=org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@75622941[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@696552a4[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], checksumValue={49,50,51,99,104,101,99,107,115,117,109,51,50,49}, calculationTimestamp=1970-01-01T01:00:00.000+01:00], checksumRequestForNewFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@191407f1[checksumType=SHA1, checksumSalt=<null>(default), otherChecksumType=<null>(default)]]
Step: Validate the steps of the ReplaceClient by going through the events.
Step: Send a failed response message to the ReplaceClient.
Result: Received event: f4d429e3: REPLACE_FILE for file default-test-file.txt: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: FAILURE, Verifying that a failure can be understood!
Result: Received event: f4d429e3: REPLACE_FILE for file default-test-file.txt: FAILED: , Failed operation. Cause(s):
[f4d429e3: REPLACE_FILE for file default-test-file.txt: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: FAILURE, Verifying that a failure can be understood!]
Test success: replaceClientPillarFailed
Test starting: replaceClientTester
Description: Tests the ReplaceFileClient. Makes a whole conversation for the replace client for a 'good' scenario.
Step: Initialise the number of pillars to one
Step: Request a file to be replaced on all pillars (which means only the default pillar).
Stimuli: replaceFile(default-test-file.txt, Pillar1, org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@7766ee02[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@6420d847[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], checksumValue={49,50,51,99,104,101,99,107,115,117,109,51,50,49}, calculationTimestamp=1970-01-01T01:00:00.000+01:00], org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@c712993[checksumType=SHA1, checksumSalt=<null>(default), otherChecksumType=<null>(default)], file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, 10, org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@56609544[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@6420d847[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], checksumValue={49,50,51,99,104,101,99,107,115,117,109,51,50,49}, calculationTimestamp=1970-01-01T01:00:00.000+01:00], org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@c712993[checksumType=SHA1, checksumSalt=<null>(default), otherChecksumType=<null>(default)], org.bitrepository.client.TestEventHandler@16367774, null
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForReplaceFileRequest@74367715[correlationID=cda27e3f-dae9-444c-8037-13a90225e98d, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-ReplaceFileClientComponentTest-cibuild01, from=replaceClientTester, to=Pillar1, version=31, minVersion=24, auditTrailInformation=<null>(default), fileID=default-test-file.txt, fileSize=<null>(default)]
Result: Received event: cda27e3f: REPLACE_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for replace file
Step: Make response for the pillar.
Result: Received event: cda27e3f: REPLACE_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar1
Result: Received event: cda27e3f: REPLACE_FILE for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: [Pillar1]
Result: Received event: cda27e3f: REPLACE_FILE for file default-test-file.txt: REQUEST_SENT: ContributorID [Pillar1], Sending request for replace file
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.ReplaceFileRequest@23968461[correlationID=cda27e3f-dae9-444c-8037-13a90225e98d, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-ReplaceFileClientComponentTest-cibuild01, from=replaceClientTester, to=Pillar1, version=31, minVersion=24, auditTrailInformation=<null>(default), pillarID=Pillar1, fileID=default-test-file.txt, checksumDataForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@7766ee02[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@6420d847[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], checksumValue={49,50,51,99,104,101,99,107,115,117,109,51,50,49}, calculationTimestamp=1970-01-01T01:00:00.000+01:00], checksumRequestForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@c712993[checksumType=SHA1, checksumSalt=<null>(default), otherChecksumType=<null>(default)], fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, fileSize=10, checksumDataForNewFile=org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@56609544[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@6420d847[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], checksumValue={49,50,51,99,104,101,99,107,115,117,109,51,50,49}, calculationTimestamp=1970-01-01T01:00:00.000+01:00], checksumRequestForNewFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@c712993[checksumType=SHA1, checksumSalt=<null>(default), otherChecksumType=<null>(default)]]
Step: Validate the steps of the ReplaceClient by going through the events.
Step: The pillar sends a progress response to the ReplaceClient.
Result: Received event: cda27e3f: REPLACE_FILE for file default-test-file.txt: PROGRESS: ContributorID Pillar1, First test progress response message
Step: Send a final response message to the ReplaceClient.
Result: Received event: cda27e3f: REPLACE_FILE for file default-test-file.txt: COMPONENT_COMPLETE: ContributorID Pillar1, checksum for new file: 'org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@56609544[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@6420d847[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], checksumValue={49,50,51,99,104,101,99,107,115,117,109,51,50,49}, calculationTimestamp=1970-01-01T01:00:00.000+01:00]',checksum for replaced file: 'null'
Result: Received event: cda27e3f: REPLACE_FILE for file default-test-file.txt: COMPLETE:
Test success: replaceClientTester
Test starting: saltedReturnChecksumsForNewFileWithChecksumPillar
Description: Tests that the ReplaceClient handles the presence of a ChecksumPillar correctly, when a salted return checksum (which a checksum pillar can't provide) is requested for the new file.
Step: Call replaceFile while requesting a salted checksum to be returned.
Stimuli: replaceFile(default-test-file.txt, Pillar1, org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@324cb824[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@2454c879[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], checksumValue={49,50,51,99,104,101,99,107,115,117,109,51,50,49}, calculationTimestamp=1970-01-01T01:00:00.000+01:00], null, file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, 0, org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@5b6ab218[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@2454c879[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], checksumValue={49,50,51,99,104,101,99,107,115,117,109,51,50,49}, calculationTimestamp=1970-01-01T01:00:00.000+01:00], org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@743b720[checksumType=MD5, checksumSalt={-86}, otherChecksumType=<null>(default)], org.bitrepository.client.TestEventHandler@5099b274, null
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForReplaceFileRequest@520cbf1e[correlationID=26fe25bc-cffa-420e-aba8-aff1701da38b, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-ReplaceFileClientComponentTest-cibuild01, from=saltedReturnChecksumsForNewFileWithChecksumPillar, to=Pillar1, version=31, minVersion=24, auditTrailInformation=<null>(default), fileID=default-test-file.txt, fileSize=<null>(default)]
Result: Received event: 26fe25bc: REPLACE_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for replace file
Step: Send an identification response with a PillarChecksumSpec element set, indicating that this is a checksum pillar.
Result: Received event: 26fe25bc: REPLACE_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar1
Result: Received event: 26fe25bc: REPLACE_FILE for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: [Pillar1]
Result: Received event: 26fe25bc: REPLACE_FILE for file default-test-file.txt: REQUEST_SENT: ContributorID [Pillar1], Sending request for replace file
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.ReplaceFileRequest@46987b3d[correlationID=26fe25bc-cffa-420e-aba8-aff1701da38b, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-ReplaceFileClientComponentTest-cibuild01, from=saltedReturnChecksumsForNewFileWithChecksumPillar, to=Pillar1, version=31, minVersion=24, auditTrailInformation=<null>(default), pillarID=Pillar1, fileID=default-test-file.txt, checksumDataForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@324cb824[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@2454c879[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], checksumValue={49,50,51,99,104,101,99,107,115,117,109,51,50,49}, calculationTimestamp=1970-01-01T01:00:00.000+01:00], checksumRequestForExistingFile=<null>(default), fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, fileSize=0, checksumDataForNewFile=org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@5b6ab218[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@2454c879[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], checksumValue={49,50,51,99,104,101,99,107,115,117,109,51,50,49}, calculationTimestamp=1970-01-01T01:00:00.000+01:00], checksumRequestForNewFile=<null>(default)]
Test success: saltedReturnChecksumsForNewFileWithChecksumPillar
Test starting: verifyReplaceFileClientFromFactory
Description: Testing the initialization through the ModifyComponentFactory.
Step: Use the ModifyComponentFactory to instantiate a ReplaceFileClient.
Test success: verifyReplaceFileClientFromFactory
Starting testcase GetChecksumsCmdTest
Test starting: checksumArgumentNonSaltAlgorithmWitoutSaltTest
Description: Test MD5 checksum without salt -> no failure
Test success: checksumArgumentNonSaltAlgorithmWitoutSaltTest
Test starting: checksumArgumentSaltAlgorithmWithSaltTest
Description: Test HMAC_SHA256 checksum with salt -> No failure
Test success: checksumArgumentSaltAlgorithmWithSaltTest
Test starting: defaultSuccessScenarioTest
Description: Tests simplest arguments for running the CmdLineClient
Test success: defaultSuccessScenarioTest
Test starting: fileArgumentTest
Description: Tests the argument for a specific file.
Test success: fileArgumentTest
Test starting: missingCollectionArgumentTest
Description: Tests the scenario, where the collection arguments is missing.
Takes the following arguments:
-s The path to the directory with the settings files for the client
-k The path to the file containing the private key.
-v Makes the client more verbose
-c The id for the collection to perform the operation on.
-i The id for the file to perform the operation on.
-p [OPTIONAL] The id of the pillar where the operation should be performed. If undefined the operation is performed on all pillars.
-R [OPTIONAL] The algorithm of checksum to request in the response from the pillars. If no such argument is given, then the default from settings is retrieved.
-S [OPTIONAL] The salt of checksum to request in the response. Requires the ChecksumType argument.
Missing argument: Missing required option: c
Test success: missingCollectionArgumentTest
Test starting: specificPillarArgumentTest
Description: Test argument for a specific pillar
Test success: specificPillarArgumentTest
Test starting: unknownPillarArgumentTest
Description: Testing against a non-existing pillar id -> Should fail
Invalid argument: Random1599207394273pillar is not a valid pillar for collection TwoPillarCollection
The collection contains the following pillars: [Pillar1, Pillar2]
Test success: unknownPillarArgumentTest
Starting testcase DeleteFileClientComponentTest
Test starting: deleteClientIdentificationTimeout
Description: Tests the handling of a failed identification for the DeleteClient
Step: Initialise the number of pillars and the DeleteClient. Sets the identification timeout to 1 sec.
Step: Request a file to be deleted on the default pillar.
Stimuli: Calling deleteFile(default-test-file.txt, Pillar1, org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@2917abdb[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@4f6fe058[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], checksumValue={49,50,51,99,104,101,99,107,115,117,109,51,50,49}, calculationTimestamp=1970-01-01T01:00:00.000+01:00], org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@70d2bdfb[checksumType=SHA1, checksumSalt=<null>(default), otherChecksumType=<null>(default)], eventHandler, null)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForDeleteFileRequest@3e74dd8d[correlationID=67bb0b15-6009-4638-a9f0-cadb6d3d518a, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-DeleteFileClientComponentTest-cibuild01, from=deleteClientIdentificationTimeout, to=Pillar1, version=31, minVersion=24, auditTrailInformation=<null>(default), fileID=default-test-file.txt]
Result: Received event: 67bb0b15: DELETE_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for delete file
Step: Do not respond. Just await the timeout.
Result: Received event: 67bb0b15: DELETE_FILE for file default-test-file.txt: IDENTIFY_TIMEOUT: , Time has run out for looking up contributors
The following contributors didn't respond: [Pillar1]
Result: Received event: 67bb0b15: DELETE_FILE for file default-test-file.txt: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: null, Timeout for identifying contributor
Result: Received event: 67bb0b15: DELETE_FILE for file default-test-file.txt: FAILED: , Unable to continue operation, contributors unavailable.
10:16:35.472 ERROR o.b.m.d.c.IdentifyPillarsForDeleteFile - Failing conversation 'DeleteFileConversationContext{collectionID='TwoPillarCollection', conversationID='67bb0b15-6009-4638-a9f0-cadb6d3d518a', clientID='deleteClientIdentificationTimeout', fileID='default-test-file.txt', contributors=[Pillar1], monitor=ConversationEventMonitor{, collectionID='TwoPillarCollection', conversationID='67bb0b15', operationType=DELETE_FILE, fileID='default-test-file.txt', eventHandler=org.bitrepository.client.TestEventHandler@3c2f4667, contributorCompleteEvents=[], contributorFailedEvents=[67bb0b15: DELETE_FILE for file default-test-file.txt: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: null, Timeout for identifying contributor], failOnComponentFailure=true}, auditTrailInformation='null', state=org.bitrepository.client.conversation.FinishedState@339d7033, checksumPillars=[]}' with exception
org.bitrepository.common.exceptions.UnableToFinishException: Unable to continue operation, contributors unavailable.
at org.bitrepository.client.conversation.IdentifyingState.completeState(IdentifyingState.java:76)
at org.bitrepository.client.conversation.GeneralConversationState.changeState(GeneralConversationState.java:147)
at org.bitrepository.client.conversation.GeneralConversationState.access$100(GeneralConversationState.java:48)
at org.bitrepository.client.conversation.GeneralConversationState$TimeoutHandler.run(GeneralConversationState.java:134)
at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:511)
at java.util.concurrent.FutureTask.run(FutureTask.java:266)
at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.access$201(ScheduledThreadPoolExecutor.java:180)
at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.run(ScheduledThreadPoolExecutor.java:293)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1142)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:617)
at java.lang.Thread.run(Thread.java:745)
Test success: deleteClientIdentificationTimeout
Test starting: deleteClientOperationTimeout
Description: Tests the handling of a failed operation for the DeleteClient
Step: Initialise the number of pillars and the DeleteClient. Sets the operation timeout to 100 ms.
Step: Request a file to be deleted on the default pillar.
Stimuli: Calling deleteFile(default-test-file.txt, Pillar1, org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@77843867[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@1accd972[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], checksumValue={49,50,51,99,104,101,99,107,115,117,109,51,50,49}, calculationTimestamp=1970-01-01T01:00:00.000+01:00], org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@5170af04[checksumType=SHA1, checksumSalt=<null>(default), otherChecksumType=<null>(default)], eventHandler, null)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForDeleteFileRequest@26919461[correlationID=cdcb49fd-ff1b-4f17-8c52-c6b3e8c626f6, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-DeleteFileClientComponentTest-cibuild01, from=deleteClientOperationTimeout, to=Pillar1, version=31, minVersion=24, auditTrailInformation=<null>(default), fileID=default-test-file.txt]
Result: Received event: cdcb49fd: DELETE_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for delete file
Step: Make response for the pillar.
Result: Received event: cdcb49fd: DELETE_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar1
Result: Received event: cdcb49fd: DELETE_FILE for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: [Pillar1]
Result: Received event: cdcb49fd: DELETE_FILE for file default-test-file.txt: REQUEST_SENT: ContributorID [Pillar1], Sending request for deleting file
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.DeleteFileRequest@cfb97ff[correlationID=cdcb49fd-ff1b-4f17-8c52-c6b3e8c626f6, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-DeleteFileClientComponentTest-cibuild01, from=deleteClientOperationTimeout, to=Pillar1, version=31, minVersion=24, auditTrailInformation=<null>(default), pillarID=Pillar1, fileID=default-test-file.txt, checksumDataForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@77843867[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@1accd972[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], checksumValue={49,50,51,99,104,101,99,107,115,117,109,51,50,49}, calculationTimestamp=1970-01-01T01:00:00.000+01:00], checksumRequestForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@5170af04[checksumType=SHA1, checksumSalt=<null>(default), otherChecksumType=<null>(default)]]
Step: Validate the steps of the DeleteClient by going through the events.
Step: Do not respond. Just await the timeout.
Result: Received event: cdcb49fd: DELETE_FILE for file default-test-file.txt: FAILED: , Failed to receive responses from all contributors before timeout(100ms). Missing contributors [Pillar1]
10:16:35.672 ERROR o.b.m.d.conversation.DeletingFile - Failing conversation 'DeleteFileConversationContext{collectionID='TwoPillarCollection', conversationID='cdcb49fd-ff1b-4f17-8c52-c6b3e8c626f6', clientID='deleteClientOperationTimeout', fileID='default-test-file.txt', contributors=[Pillar1], monitor=ConversationEventMonitor{, collectionID='TwoPillarCollection', conversationID='cdcb49fd', operationType=DELETE_FILE, fileID='default-test-file.txt', eventHandler=org.bitrepository.client.TestEventHandler@2dc5d6ae, contributorCompleteEvents=[], contributorFailedEvents=[], failOnComponentFailure=true}, auditTrailInformation='null', state=org.bitrepository.client.conversation.FinishedState@7d0fe5bf, checksumPillars=[]}' with exception
org.bitrepository.common.exceptions.UnableToFinishException: Failed to receive responses from all contributors before timeout(100ms). Missing contributors [Pillar1]
at org.bitrepository.client.conversation.PerformingOperationState.logStateTimeout(PerformingOperationState.java:82)
at org.bitrepository.client.conversation.GeneralConversationState$TimeoutHandler.run(GeneralConversationState.java:133)
at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:511)
at java.util.concurrent.FutureTask.run(FutureTask.java:266)
at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.access$201(ScheduledThreadPoolExecutor.java:180)
at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.run(ScheduledThreadPoolExecutor.java:293)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1142)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:617)
at java.lang.Thread.run(Thread.java:745)
Test success: deleteClientOperationTimeout
Test starting: deleteClientOtherPillarFailedDuringIdentification
Description: Tests the handling of a identification failure for a pillar for the DeleteClient.
Step: Request a file to be deleted on the pillar1.
Stimuli: Calling deleteFile(default-test-file.txt, Pillar1, org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@3420e9b5[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@250b97bc[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], checksumValue={-108,10,81,-78,80,-25,-86,-126,-40,-24,-22,49,33,127,-14,103}, calculationTimestamp=2020-09-04T10:16:35.774+02:00], null, eventHandler, null)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForDeleteFileRequest@128cfade[correlationID=6b0e2174-429c-4d9e-90f6-b2a7f39243fe, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-DeleteFileClientComponentTest-cibuild01, from=deleteClientOtherPillarFailedDuringIdentification, to=Pillar1, version=31, minVersion=24, auditTrailInformation=<null>(default), fileID=default-test-file.txt]
Result: Received event: 6b0e2174: DELETE_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for delete file
Step: Send a failed response from pillar2.
Step: Send a ok response from pillar1.
Result: Received event: 6b0e2174: DELETE_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar1
Result: Received event: 6b0e2174: DELETE_FILE for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: [Pillar1]
Result: Received event: 6b0e2174: DELETE_FILE for file default-test-file.txt: REQUEST_SENT: ContributorID [Pillar1], Sending request for deleting file
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.DeleteFileRequest@99a8f91[correlationID=6b0e2174-429c-4d9e-90f6-b2a7f39243fe, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-DeleteFileClientComponentTest-cibuild01, from=deleteClientOtherPillarFailedDuringIdentification, to=Pillar1, version=31, minVersion=24, auditTrailInformation=<null>(default), pillarID=Pillar1, fileID=default-test-file.txt, checksumDataForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@3420e9b5[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@250b97bc[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], checksumValue={-108,10,81,-78,80,-25,-86,-126,-40,-24,-22,49,33,127,-14,103}, calculationTimestamp=2020-09-04T10:16:35.774+02:00], checksumRequestForExistingFile=<null>(default)]
Step: Send a final response message from pillar 1 to the DeleteClient.
Result: Received event: 6b0e2174: DELETE_FILE for file default-test-file.txt: COMPONENT_COMPLETE: ContributorID Pillar1, DeleteFileResult=null
Result: Received event: 6b0e2174: DELETE_FILE for file default-test-file.txt: COMPLETE:
Test success: deleteClientOtherPillarFailedDuringIdentification
Test starting: deleteClientPillarFailedDuringPerform
Description: Tests the handling of a operation failure for the DeleteClient.
Step: Initialise the number of pillars to one
Step: Request a file to be deleted on the default pillar.
Stimuli: Calling deleteFile(default-test-file.txt, Pillar1, org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@57d079e5[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@4caaf3df[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], checksumValue={49,50,51,99,104,101,99,107,115,117,109,51,50,49}, calculationTimestamp=1970-01-01T01:00:00.000+01:00], org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@683424c9[checksumType=SHA1, checksumSalt=<null>(default), otherChecksumType=<null>(default)], eventHandler, null)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForDeleteFileRequest@9ae41ca[correlationID=fef27de4-5b17-4db5-a9a7-bd8120c05fa5, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-DeleteFileClientComponentTest-cibuild01, from=deleteClientPillarFailedDuringPerform, to=Pillar1, version=31, minVersion=24, auditTrailInformation=<null>(default), fileID=default-test-file.txt]
Result: Received event: fef27de4: DELETE_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for delete file
Step: Make response for the pillar.
Result: Received event: fef27de4: DELETE_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar1
Result: Received event: fef27de4: DELETE_FILE for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: [Pillar1]
Result: Received event: fef27de4: DELETE_FILE for file default-test-file.txt: REQUEST_SENT: ContributorID [Pillar1], Sending request for deleting file
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.DeleteFileRequest@464a2a33[correlationID=fef27de4-5b17-4db5-a9a7-bd8120c05fa5, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-DeleteFileClientComponentTest-cibuild01, from=deleteClientPillarFailedDuringPerform, to=Pillar1, version=31, minVersion=24, auditTrailInformation=<null>(default), pillarID=Pillar1, fileID=default-test-file.txt, checksumDataForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@57d079e5[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@4caaf3df[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], checksumValue={49,50,51,99,104,101,99,107,115,117,109,51,50,49}, calculationTimestamp=1970-01-01T01:00:00.000+01:00], checksumRequestForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@683424c9[checksumType=SHA1, checksumSalt=<null>(default), otherChecksumType=<null>(default)]]
Step: Validate the steps of the DeleteClient by going through the events.
Step: Send a failed response message to the DeleteClient.
Result: Received event: fef27de4: DELETE_FILE for file default-test-file.txt: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: FAILURE, Verifying that a failure can be understood!
Result: Received event: fef27de4: DELETE_FILE for file default-test-file.txt: FAILED: , Failed operation. Cause(s):
[fef27de4: DELETE_FILE for file default-test-file.txt: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: FAILURE, Verifying that a failure can be understood!]
Test success: deleteClientPillarFailedDuringPerform
Test starting: deleteClientSpecifiedPillarFailedDuringIdentification
Description: Tests the handling of a identification failure for a pillar for the DeleteClient.
Step: Request a file to be deleted on the pillar1.
Stimuli: Calling deleteFile(default-test-file.txt, Pillar1, org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@2c5a10b4[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@55e149e4[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], checksumValue={-108,10,81,-78,80,-25,-86,-126,-40,-24,-22,49,33,127,-14,103}, calculationTimestamp=2020-09-04T10:16:36.996+02:00], null, eventHandler, null)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForDeleteFileRequest@4bc6fe65[correlationID=8b36b649-faeb-4d62-8689-beba6def7110, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-DeleteFileClientComponentTest-cibuild01, from=deleteClientSpecifiedPillarFailedDuringIdentification, to=Pillar1, version=31, minVersion=24, auditTrailInformation=<null>(default), fileID=default-test-file.txt]
Result: Received event: 8b36b649: DELETE_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for delete file
Step: Send a failed response from pillar1.
Result: Received event: 8b36b649: DELETE_FILE for file default-test-file.txt: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: IDENTIFICATION_NEGATIVE
Result: Received event: 8b36b649: DELETE_FILE for file default-test-file.txt: FAILED: , Can not continue with delete operation, as Pillar1 is unable to perform the deletion.
10:16:36.998 ERROR o.b.m.d.c.IdentifyPillarsForDeleteFile - Failing conversation 'DeleteFileConversationContext{collectionID='TwoPillarCollection', conversationID='8b36b649-faeb-4d62-8689-beba6def7110', clientID='deleteClientSpecifiedPillarFailedDuringIdentification', fileID='default-test-file.txt', contributors=[Pillar1], monitor=ConversationEventMonitor{, collectionID='TwoPillarCollection', conversationID='8b36b649', operationType=DELETE_FILE, fileID='default-test-file.txt', eventHandler=org.bitrepository.client.TestEventHandler@6abe9167, contributorCompleteEvents=[], contributorFailedEvents=[8b36b649: DELETE_FILE for file default-test-file.txt: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: IDENTIFICATION_NEGATIVE], failOnComponentFailure=true}, auditTrailInformation='null', state=org.bitrepository.client.conversation.FinishedState@161de334, checksumPillars=[]}' with exception
org.bitrepository.common.exceptions.UnableToFinishException: Can not continue with delete operation, as Pillar1 is unable to perform the deletion.
at org.bitrepository.modify.deletefile.conversation.IdentifyPillarsForDeleteFile.handleFailureResponse(IdentifyPillarsForDeleteFile.java:71)
at org.bitrepository.client.conversation.IdentifyingState.processMessage(IdentifyingState.java:60)
at org.bitrepository.client.conversation.GeneralConversationState.handleMessage(GeneralConversationState.java:110)
at org.bitrepository.client.conversation.StateBasedConversation.onMessage(StateBasedConversation.java:53)
at org.bitrepository.client.conversation.mediator.CollectionBasedConversationMediator.onMessage(CollectionBasedConversationMediator.java:136)
at org.bitrepository.protocol.messagebus.SimpleMessageBus.lambda$sendMessage$0(SimpleMessageBus.java:73)
at java.lang.Iterable.forEach(Iterable.java:75)
at org.bitrepository.protocol.messagebus.SimpleMessageBus.sendMessage(SimpleMessageBus.java:73)
at org.bitrepository.modify.deletefile.DeleteFileClientComponentTest.deleteClientSpecifiedPillarFailedDuringIdentification(DeleteFileClientComponentTest.java:357)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:498)
at org.testng.internal.MethodInvocationHelper.invokeMethod(MethodInvocationHelper.java:134)
at org.testng.internal.TestInvoker.invokeMethod(TestInvoker.java:597)
at org.testng.internal.TestInvoker.invokeTestMethod(TestInvoker.java:173)
at org.testng.internal.MethodRunner.runInSequence(MethodRunner.java:46)
at org.testng.internal.TestInvoker$MethodInvocationAgent.invoke(TestInvoker.java:816)
at org.testng.internal.TestInvoker.invokeTestMethods(TestInvoker.java:146)
at org.testng.internal.TestMethodWorker.invokeTestMethods(TestMethodWorker.java:146)
at org.testng.internal.TestMethodWorker.run(TestMethodWorker.java:128)
at java.util.ArrayList.forEach(ArrayList.java:1249)
at org.testng.TestRunner.privateRun(TestRunner.java:766)
at org.testng.TestRunner.run(TestRunner.java:587)
at org.testng.SuiteRunner.runTest(SuiteRunner.java:384)
at org.testng.SuiteRunner.runSequentially(SuiteRunner.java:378)
at org.testng.SuiteRunner.privateRun(SuiteRunner.java:337)
at org.testng.SuiteRunner.run(SuiteRunner.java:286)
at org.testng.SuiteRunnerWorker.runSuite(SuiteRunnerWorker.java:53)
at org.testng.SuiteRunnerWorker.run(SuiteRunnerWorker.java:96)
at org.testng.TestNG.runSuitesSequentially(TestNG.java:1187)
at org.testng.TestNG.runSuitesLocally(TestNG.java:1109)
at org.testng.TestNG.runSuites(TestNG.java:1039)
at org.testng.TestNG.run(TestNG.java:1007)
at org.apache.maven.surefire.testng.TestNGExecutor.run(TestNGExecutor.java:135)
at org.apache.maven.surefire.testng.TestNGDirectoryTestSuite.executeMulti(TestNGDirectoryTestSuite.java:193)
at org.apache.maven.surefire.testng.TestNGDirectoryTestSuite.execute(TestNGDirectoryTestSuite.java:94)
at org.apache.maven.surefire.testng.TestNGProvider.invoke(TestNGProvider.java:146)
at org.apache.maven.surefire.booter.ForkedBooter.runSuitesInProcess(ForkedBooter.java:377)
at org.apache.maven.surefire.booter.ForkedBooter.execute(ForkedBooter.java:138)
at org.apache.maven.surefire.booter.ForkedBooter.run(ForkedBooter.java:465)
at org.apache.maven.surefire.booter.ForkedBooter.main(ForkedBooter.java:451)
Test success: deleteClientSpecifiedPillarFailedDuringIdentification
Test starting: deleteClientTester
Description: Tests the DeleteClient. Makes a whole conversation for the delete client for a 'good' scenario.
Step: Initialise the number of pillars to one
Step: Request a file to be deleted on all pillars (which means only the default pillar).
Stimuli: Calling deleteFile(default-test-file.txt, Pillar1, org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@178ca67[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@2ec9eda7[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], checksumValue={49,50,51,99,104,101,99,107,115,117,109,51,50,49}, calculationTimestamp=1970-01-01T01:00:00.000+01:00], org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@521a8a9b[checksumType=SHA1, checksumSalt=<null>(default), otherChecksumType=<null>(default)], eventHandler, null)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForDeleteFileRequest@7a5c6d8[correlationID=0da4ddf0-4936-41ab-8a2c-40fb7d204b53, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-DeleteFileClientComponentTest-cibuild01, from=deleteClientTester, to=Pillar1, version=31, minVersion=24, auditTrailInformation=<null>(default), fileID=default-test-file.txt]
Result: Received event: 0da4ddf0: DELETE_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for delete file
Step: Make response for the pillar.
Result: Received event: 0da4ddf0: DELETE_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar1
Result: Received event: 0da4ddf0: DELETE_FILE for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: [Pillar1]
Result: Received event: 0da4ddf0: DELETE_FILE for file default-test-file.txt: REQUEST_SENT: ContributorID [Pillar1], Sending request for deleting file
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.DeleteFileRequest@218c76c2[correlationID=0da4ddf0-4936-41ab-8a2c-40fb7d204b53, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-DeleteFileClientComponentTest-cibuild01, from=deleteClientTester, to=Pillar1, version=31, minVersion=24, auditTrailInformation=<null>(default), pillarID=Pillar1, fileID=default-test-file.txt, checksumDataForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@178ca67[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@2ec9eda7[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], checksumValue={49,50,51,99,104,101,99,107,115,117,109,51,50,49}, calculationTimestamp=1970-01-01T01:00:00.000+01:00], checksumRequestForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@521a8a9b[checksumType=SHA1, checksumSalt=<null>(default), otherChecksumType=<null>(default)]]
Step: Validate the steps of the DeleteClient by going through the events.
Step: The pillar sends a progress response to the DeleteClient.
Result: Received event: 0da4ddf0: DELETE_FILE for file default-test-file.txt: PROGRESS: ContributorID Pillar1, First test progress response message
Step: Send a final response message to the DeleteClient.
Result: Received event: 0da4ddf0: DELETE_FILE for file default-test-file.txt: COMPONENT_COMPLETE: ContributorID Pillar1, DeleteFileResult=null
Result: Received event: 0da4ddf0: DELETE_FILE for file default-test-file.txt: COMPLETE:
Test success: deleteClientTester
Test starting: deleteOnChecksumPillar
Description: Verify that the DeleteClient works correctly when a checksum pillar is present.
Step: Request a file to be deleted on the pillar1.
Stimuli: Calling deleteFile(default-test-file.txt, Pillar1, org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@253ce354[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@33469a2a[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], checksumValue={-108,10,81,-78,80,-25,-86,-126,-40,-24,-22,49,33,127,-14,103}, calculationTimestamp=2020-09-04T10:16:37.219+02:00], null, eventHandler, null)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForDeleteFileRequest@1eb0b2b0[correlationID=b7d47180-1d5a-4925-84d7-7e763ce1bcb7, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-DeleteFileClientComponentTest-cibuild01, from=deleteOnChecksumPillar, to=Pillar1, version=31, minVersion=24, auditTrailInformation=<null>(default), fileID=default-test-file.txt]
Result: Received event: b7d47180: DELETE_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for delete file
Step: Send an identification response from pillar2.
Step: Send a response from pillar1 with PillarChecksumSpec element set, indicating that this is a checksum pillar.
Result: Received event: b7d47180: DELETE_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar1
Result: Received event: b7d47180: DELETE_FILE for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: [Pillar1]
Result: Received event: b7d47180: DELETE_FILE for file default-test-file.txt: REQUEST_SENT: ContributorID [Pillar1], Sending request for deleting file
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.DeleteFileRequest@4dbf8493[correlationID=b7d47180-1d5a-4925-84d7-7e763ce1bcb7, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-DeleteFileClientComponentTest-cibuild01, from=deleteOnChecksumPillar, to=Pillar1, version=31, minVersion=24, auditTrailInformation=<null>(default), pillarID=Pillar1, fileID=default-test-file.txt, checksumDataForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@253ce354[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@33469a2a[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], checksumValue={-108,10,81,-78,80,-25,-86,-126,-40,-24,-22,49,33,127,-14,103}, calculationTimestamp=2020-09-04T10:16:37.219+02:00], checksumRequestForExistingFile=<null>(default)]
Test success: deleteOnChecksumPillar
Test starting: deleteOnChecksumPillarWithDefaultReturnChecksumType
Description: Verify that the DeleteClient works correctly when a return checksum of the default typeis requested.
Step: Request a file to be deleted on the pillar1. The call should include a request for a check sum of the default type
Stimuli: Calling deleteFile(default-test-file.txt, Pillar1, org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@4ccc1de7[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@56897198[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], checksumValue={-108,10,81,-78,80,-25,-86,-126,-40,-24,-22,49,33,127,-14,103}, calculationTimestamp=2020-09-04T10:16:39.313+02:00], org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@cd9eb32[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], eventHandler, null)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForDeleteFileRequest@603b4891[correlationID=17a92a64-0881-46a2-ba8d-52caa31cc5c9, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-DeleteFileClientComponentTest-cibuild01, from=deleteOnChecksumPillarWithDefaultReturnChecksumType, to=Pillar1, version=31, minVersion=24, auditTrailInformation=<null>(default), fileID=default-test-file.txt]
Result: Received event: 17a92a64: DELETE_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for delete file
Step: Send a response from pillar1 with PillarChecksumSpec element set, indicating that this is a checksum pillar.
Result: Received event: 17a92a64: DELETE_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar1
Result: Received event: 17a92a64: DELETE_FILE for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: [Pillar1]
Result: Received event: 17a92a64: DELETE_FILE for file default-test-file.txt: REQUEST_SENT: ContributorID [Pillar1], Sending request for deleting file
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.DeleteFileRequest@512cfffb[correlationID=17a92a64-0881-46a2-ba8d-52caa31cc5c9, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-DeleteFileClientComponentTest-cibuild01, from=deleteOnChecksumPillarWithDefaultReturnChecksumType, to=Pillar1, version=31, minVersion=24, auditTrailInformation=<null>(default), pillarID=Pillar1, fileID=default-test-file.txt, checksumDataForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@4ccc1de7[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@56897198[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], checksumValue={-108,10,81,-78,80,-25,-86,-126,-40,-24,-22,49,33,127,-14,103}, calculationTimestamp=2020-09-04T10:16:39.313+02:00], checksumRequestForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@cd9eb32[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)]]
Test success: deleteOnChecksumPillarWithDefaultReturnChecksumType
Test starting: deleteOnChecksumPillarWithSaltedReturnChecksumType
Description: Verify that the DeleteClient works correctly when a return checksum with a salt is requested.
Step: Request a file to be deleted on the pillar1. The call should include a request for a salted check sum
Stimuli: Calling deleteFile(default-test-file.txt, Pillar1, org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@605a5ffb[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@249318e7[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], checksumValue={-108,10,81,-78,80,-25,-86,-126,-40,-24,-22,49,33,127,-14,103}, calculationTimestamp=2020-09-04T10:16:39.423+02:00], org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@3be84451[checksumType=MD5, checksumSalt={-86}, otherChecksumType=<null>(default)], eventHandler, null)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForDeleteFileRequest@7bea8756[correlationID=b678ee09-713d-4085-ac24-17d71e42e7fd, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-DeleteFileClientComponentTest-cibuild01, from=deleteOnChecksumPillarWithSaltedReturnChecksumType, to=Pillar1, version=31, minVersion=24, auditTrailInformation=<null>(default), fileID=default-test-file.txt]
Result: Received event: b678ee09: DELETE_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for delete file
Step: Send a response from pillar1 with PillarChecksumSpec element set, indicating that this is a checksum pillar.
Result: Received event: b678ee09: DELETE_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar1
Result: Received event: b678ee09: DELETE_FILE for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: [Pillar1]
Result: Received event: b678ee09: DELETE_FILE for file default-test-file.txt: REQUEST_SENT: ContributorID [Pillar1], Sending request for deleting file
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.DeleteFileRequest@7515d7bf[correlationID=b678ee09-713d-4085-ac24-17d71e42e7fd, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-DeleteFileClientComponentTest-cibuild01, from=deleteOnChecksumPillarWithSaltedReturnChecksumType, to=Pillar1, version=31, minVersion=24, auditTrailInformation=<null>(default), pillarID=Pillar1, fileID=default-test-file.txt, checksumDataForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@605a5ffb[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@249318e7[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], checksumValue={-108,10,81,-78,80,-25,-86,-126,-40,-24,-22,49,33,127,-14,103}, calculationTimestamp=2020-09-04T10:16:39.423+02:00], checksumRequestForExistingFile=<null>(default)]
Test success: deleteOnChecksumPillarWithSaltedReturnChecksumType
Test starting: fileAlreadyDeletedFromPillar
Description: Test that a delete on a pillar completes successfully when the file is missing (has already been deleted). This is a test of the Idempotent behaviour of the delete client
Step: Request a file to be deleted on pillar1.
Stimuli: Calling deleteFile(default-test-file.txt, Pillar1, org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@3f4eac32[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@6d7f2ee5[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], checksumValue={-108,10,81,-78,80,-25,-86,-126,-40,-24,-22,49,33,127,-14,103}, calculationTimestamp=2020-09-04T10:16:39.546+02:00], null, eventHandler, null)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForDeleteFileRequest@47ee72fd[correlationID=27457768-0276-4a4f-a390-a0528b5d41fb, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-DeleteFileClientComponentTest-cibuild01, from=fileAlreadyDeletedFromPillar, to=Pillar1, version=31, minVersion=24, auditTrailInformation=<null>(default), fileID=default-test-file.txt]
Result: Received event: 27457768: DELETE_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for delete file
Step: Send a identify response from Pillar1 with a missing file response.
Result: Received event: 27457768: DELETE_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar1
Result: Received event: 27457768: DELETE_FILE for file default-test-file.txt: COMPONENT_COMPLETE: ContributorID Pillar1, DeleteFileResult=null
Result: Received event: 27457768: DELETE_FILE for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: []
Result: Received event: 27457768: DELETE_FILE for file default-test-file.txt: COMPLETE:
Step: The client should then continue to the performing phase and finish immediately as the pillar has already had the file removed apparently .
Step: Send a identify response from Pillar2
Test success: fileAlreadyDeletedFromPillar
Test starting: verifyDeleteClientFromFactory
Description: Testing the initialization through the ModifyComponentFactory.
Step: Use the ModifyComponentFactory to instantiate a PutFileClient.
Test success: verifyDeleteClientFromFactory
Starting testcase NegativeResponseExceptionTest
Test starting: testNegativeResponse
Description: Test the instantiation of the exception
Step: Setup
Step: Try to throw such an exception with the response code
Test success: testNegativeResponse
Starting testcase GetStatusClientComponentTest
Test starting: getAllStatuses
Description: Tests the simplest case of getting status for all contributers.
Step: Create a GetStatusClient.
Step: Retrieve from all contributors in the collection
Stimuli: Calling getAuditTrails()
Result: Received event: 0eeb655b: GET_STATUS: IDENTIFY_REQUEST_SENT: , Identifying contributors for getting status
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyContributorsForGetStatusRequest@6af63224[correlationID=0eeb655b-8ad8-4aab-893d-799518f54f9d, collectionID=<null>(default), destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-GetStatusClientComponentTest-cibuild01, from=getAllStatuses, to=<null>(default), version=31, minVersion=24, auditTrailInformation=]
Step: Send a identifyResponse from each pillar
Result: Received event: 0eeb655b: GET_STATUS: COMPONENT_IDENTIFIED: ContributorID Pillar1
Result: Received event: 0eeb655b: GET_STATUS: COMPONENT_IDENTIFIED: ContributorID Pillar2
Result: Received event: 0eeb655b: GET_STATUS: IDENTIFICATION_COMPLETE: Contributors: [Pillar1, Pillar2]
Result: Received event: 0eeb655b: GET_STATUS: REQUEST_SENT: ContributorID [Pillar1, Pillar2], Sending GetStatusRequest
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.GetStatusRequest@6d6fa8ff[correlationID=0eeb655b-8ad8-4aab-893d-799518f54f9d, collectionID=<null>(default), destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-GetStatusClientComponentTest-cibuild01, from=getAllStatuses, to=<null>(default), version=31, minVersion=24, auditTrailInformation=, contributor=Pillar1]
Result: Received message on Pillar2_topic-cibuild01 : org.bitrepository.bitrepositorymessages.GetStatusRequest@71179957[correlationID=0eeb655b-8ad8-4aab-893d-799518f54f9d, collectionID=<null>(default), destination=Pillar2_topic-cibuild01, replyTo=TEST-TOPIC-GetStatusClientComponentTest-cibuild01, from=getAllStatuses, to=<null>(default), version=31, minVersion=24, auditTrailInformation=, contributor=Pillar2]
Step: Send a final response from pillar 1
Result: Received event: 0eeb655b: GET_STATUS: COMPONENT_COMPLETE: ContributorID Pillar1, resulting status: org.bitrepository.bitrepositoryelements.ResultingStatus@d25f036[statusInfo=org.bitrepository.bitrepositoryelements.StatusInfo@3b641583[statusCode=OK, statusText=Everythings fine..], statusTimestamp=2020-09-04T10:16:40.769+02:00]
Step: Send a final response from pillar 2
Result: Received event: 0eeb655b: GET_STATUS: COMPONENT_COMPLETE: ContributorID Pillar2, resulting status: org.bitrepository.bitrepositoryelements.ResultingStatus@2b530a01[statusInfo=org.bitrepository.bitrepositoryelements.StatusInfo@745ad798[statusCode=OK, statusText=Everythings fine..], statusTimestamp=2020-09-04T10:16:40.770+02:00]
Result: Received event: 0eeb655b: GET_STATUS: COMPLETE:
Test success: getAllStatuses
Test starting: incompleteSetOfIdendifyResponses
Description: Verify that the GetStatus client works correct without receiving responses from all contributers.
Step: Configure 1 second timeout for identifying contributers. The default 2 contributers collection is used
Stimuli: Calling getAuditTrails()
Result: Received event: 48cdb3d6: GET_STATUS: IDENTIFY_REQUEST_SENT: , Identifying contributors for getting status
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyContributorsForGetStatusRequest@4421bfc1[correlationID=48cdb3d6-bf01-4ec1-a19b-d7562447d259, collectionID=<null>(default), destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-GetStatusClientComponentTest-cibuild01, from=incompleteSetOfIdendifyResponses, to=<null>(default), version=31, minVersion=24, auditTrailInformation=]
Step: Send a identifyResponse from pillar 1
Result: Received event: 48cdb3d6: GET_STATUS: COMPONENT_IDENTIFIED: ContributorID Pillar1
Step: Wait for timeout event
Result: Received event: 48cdb3d6: GET_STATUS: IDENTIFY_TIMEOUT: , Time has run out for looking up contributors
The following contributors didn't respond: [Pillar2]
Result: Received event: 48cdb3d6: GET_STATUS: COMPONENT_FAILED: ContributorID Pillar2 ResponseCode: null, Timeout for identifying contributor
Result: Received event: 48cdb3d6: GET_STATUS: IDENTIFICATION_COMPLETE: Contributors: [Pillar1]
Result: Received event: 48cdb3d6: GET_STATUS: REQUEST_SENT: ContributorID [Pillar1], Sending GetStatusRequest
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.GetStatusRequest@3b559807[correlationID=48cdb3d6-bf01-4ec1-a19b-d7562447d259, collectionID=<null>(default), destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-GetStatusClientComponentTest-cibuild01, from=incompleteSetOfIdendifyResponses, to=<null>(default), version=31, minVersion=24, auditTrailInformation=, contributor=Pillar1]
Test success: incompleteSetOfIdendifyResponses
Test starting: verifyGetStatusClientFromFactory
Test success: verifyGetStatusClientFromFactory
Finished testcase
Finished suite
Finished project
[INFO] Tests run: 156, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 58.213 s - in TestSuite
[INFO]
[INFO] Results:
[INFO]
[INFO] Tests run: 156, Failures: 0, Errors: 0, Skipped: 0
[INFO]
[JENKINS] Recording test results
[INFO]
[INFO] --- jacoco-maven-plugin:0.8.5:report (report) @ bitrepository-client ---
[INFO] Loading execution data file /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-client/target/jacoco.exec
[INFO] Analyzed bundle 'Bitrepository Client' with 114 classes
[INFO]
[INFO] --- maven-jar-plugin:3.2.0:jar (default-jar) @ bitrepository-client ---
[INFO] Building jar: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-client/target/bitrepository-client-1.10-SNAPSHOT.jar
[INFO]
[INFO] --- maven-jar-plugin:3.2.0:test-jar (default) @ bitrepository-client ---
[INFO] Building jar: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-client/target/bitrepository-client-1.10-SNAPSHOT-tests.jar
[INFO]
[INFO] --- maven-source-plugin:3.2.1:jar-no-fork (attach-sources-no-fork) @ bitrepository-client ---
[INFO] Building jar: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-client/target/bitrepository-client-1.10-SNAPSHOT-sources.jar
[INFO]
[INFO] --- maven-assembly-plugin:3.3.0:single (make-assembly) @ bitrepository-client ---
[INFO] Reading assembly descriptor: src/main/assembly/assembly.xml
[INFO] Building tar: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-client/target/bitrepository-client-1.10-SNAPSHOT-distribution.tar.gz
[INFO]
[INFO] --- maven-install-plugin:3.0.0-M1:install (default-install) @ bitrepository-client ---
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-client/target/bitrepository-client-1.10-SNAPSHOT.jar to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-client/1.10-SNAPSHOT/bitrepository-client-1.10-SNAPSHOT.jar
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-client/pom.xml to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-client/1.10-SNAPSHOT/bitrepository-client-1.10-SNAPSHOT.pom
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-client/target/bitrepository-client-1.10-SNAPSHOT-tests.jar to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-client/1.10-SNAPSHOT/bitrepository-client-1.10-SNAPSHOT-tests.jar
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-client/target/bitrepository-client-1.10-SNAPSHOT-sources.jar to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-client/1.10-SNAPSHOT/bitrepository-client-1.10-SNAPSHOT-sources.jar
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-client/target/bitrepository-client-1.10-SNAPSHOT-distribution.tar.gz to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-client/1.10-SNAPSHOT/bitrepository-client-1.10-SNAPSHOT-distribution.tar.gz
[INFO]
[INFO] --- maven-deploy-plugin:3.0.0-M1:deploy (default-deploy) @ bitrepository-client ---
[INFO] Downloading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-client/1.10-SNAPSHOT/maven-metadata.xml
[INFO] Downloaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-client/1.10-SNAPSHOT/maven-metadata.xml (2 KB at 52.3 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-client/1.10-SNAPSHOT/bitrepository-client-1.10-20200904.081646-54.jar
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-client/1.10-SNAPSHOT/bitrepository-client-1.10-20200904.081646-54.jar (191 KB at 5955.4 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-client/1.10-SNAPSHOT/bitrepository-client-1.10-20200904.081646-54.pom
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-client/1.10-SNAPSHOT/bitrepository-client-1.10-20200904.081646-54.pom (2 KB at 149.9 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-client/1.10-SNAPSHOT/bitrepository-client-1.10-20200904.081646-54-tests.jar
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-client/1.10-SNAPSHOT/bitrepository-client-1.10-20200904.081646-54-tests.jar (114 KB at 7593.6 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-client/1.10-SNAPSHOT/bitrepository-client-1.10-20200904.081646-54-sources.jar
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-client/1.10-SNAPSHOT/bitrepository-client-1.10-20200904.081646-54-sources.jar (198 KB at 8215.5 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-client/1.10-SNAPSHOT/bitrepository-client-1.10-20200904.081646-54-distribution.tar.gz
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-client/1.10-SNAPSHOT/bitrepository-client-1.10-20200904.081646-54-distribution.tar.gz (9035 KB at 27213.8 KB/sec)
[INFO] Downloading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-client/maven-metadata.xml
[INFO] Downloaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-client/maven-metadata.xml (484 B at 43.0 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-client/1.10-SNAPSHOT/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-client/1.10-SNAPSHOT/maven-metadata.xml (2 KB at 74.3 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-client/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-client/maven-metadata.xml (484 B at 26.3 KB/sec)
[JENKINS] Archiving disabled
Console Output
Help us localize this page