[INFO]
[INFO] ------------------------------------------------------------------------
[INFO] Building Bitrepository Client 1.6-SNAPSHOT
[INFO] ------------------------------------------------------------------------
[INFO]
[INFO] --- maven-clean-plugin:2.5:clean (default-clean) @ bitrepository-client ---
[INFO]
[INFO] --- maven-resources-plugin:2.6:resources (default-resources) @ bitrepository-client ---
[INFO] Using 'UTF-8' encoding to copy filtered resources.
[INFO] Copying 4 resources
[INFO]
[INFO] --- maven-compiler-plugin:3.1:compile (default-compile) @ bitrepository-client ---
[INFO] Changes detected - recompiling the module!
[INFO] Compiling 130 source files to /home/cibuild01/workspace/Bitrepository-sonar/bitrepository-client/target/classes
[INFO]
[INFO] --- maven-resources-plugin:2.6:testResources (default-testResources) @ bitrepository-client ---
[INFO] Using 'UTF-8' encoding to copy filtered resources.
[INFO] skip non existing resourceDirectory /home/cibuild01/workspace/Bitrepository-sonar/bitrepository-client/src/test/resources
[INFO]
[INFO] --- maven-compiler-plugin:3.1:testCompile (default-testCompile) @ bitrepository-client ---
[INFO] Changes detected - recompiling the module!
[INFO] Compiling 41 source files to /home/cibuild01/workspace/Bitrepository-sonar/bitrepository-client/target/test-classes
[INFO]
[INFO] --- maven-surefire-plugin:2.17:test (default-test) @ bitrepository-client ---
[INFO] Surefire report directory: /home/cibuild01/workspace/Bitrepository-sonar/bitrepository-client/target/surefire-reports
-------------------------------------------------------
T E S T S
-------------------------------------------------------
Running TestSuite
Configuring TestNG with: TestNG652Configurator
Starting test project Core module test
Suite: Surefire suite
Starting testcase ChecksumExtractionUtilsTest
Test starting: testDefaultChecksumSpec
Description: Test that the default checksum is retrieved when no arguments are given.
Test success: testDefaultChecksumSpec
Test starting: testDefaultChecksumSpecWithSaltArgument
Description: Test that the HMAC version of default checksum is retrieved when the salt arguments are given.
Test success: testDefaultChecksumSpecWithSaltArgument
Test starting: testNonSaltChecksumSpecWithSaltArgument
Description: Test that a salt checksum type is retrieved even though a non-salt checksum algorithm it is given as argument, but a salt argument also is given.
Test success: testNonSaltChecksumSpecWithSaltArgument
Test starting: testNonSaltChecksumSpecWithoutSaltArgument
Description: Test that a non-salt checksum type is retrieved when it is given as argument, and no salt arguments are given.
Test success: testNonSaltChecksumSpecWithoutSaltArgument
Test starting: testSaltChecksumSpecWithSaltArgument
Description: Test that a salt checksum type is retrieved when the salt checksum algorithm it is given as argument, and a salt argument also is given.
Test success: testSaltChecksumSpecWithSaltArgument
Test starting: testSaltChecksumSpecWithoutSaltArgument
Description: Test that a non-salt checksum type is retrieved even though a salt checksum algorithm it is given as argument, but no salt argument also is given.
Test success: testSaltChecksumSpecWithoutSaltArgument
Starting testcase GetFileIDsClientComponentTest
Test starting: collectionIDIncludedInEventsTest
Description: Tests the the client provides collectionID in events.
Step: Set a 0.5 second operation timeout.
Step: Start the operation
Stimuli: Calling getFileIDs(null, null, null, org.bitrepository.client.TestEventHandler@4c9e38)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForGetFileIDsRequest@7a639ec5[correlationID=8323f727-a29a-41f6-98bc-f3d64536b9b3, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-GetFileIDsClientComponentTest-cibuild01, from=collectionIDIncludedInEventsTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@2a49fe[fileID=<null>, allFileIDs=true]]
Result: Received event: 8323f727: GET_FILE_IDS: IDENTIFY_REQUEST_SENT: , Identifying contributers for get fileIDs
Step: Send positive responses from the pillar1 and a negative response from pillar2
Result: Received event: 8323f727: GET_FILE_IDS: COMPONENT_IDENTIFIED: ContributorID Pillar1
Result: Received event: 8323f727: GET_FILE_IDS: COMPONENT_FAILED: ContributorID Pillar2 ResponseCode: IDENTIFICATION_NEGATIVE
Result: Received event: 8323f727: GET_FILE_IDS: IDENTIFICATION_COMPLETE: Contributors: [Pillar1]
Result: Received event: 8323f727: GET_FILE_IDS: REQUEST_SENT: ContributorID [Pillar1], Sending request for get fileIDs
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.GetFileIDsRequest@982bb90[correlationID=8323f727-a29a-41f6-98bc-f3d64536b9b3, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-GetFileIDsClientComponentTest-cibuild01, from=collectionIDIncludedInEventsTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, pillarID=Pillar1, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@27f74733[fileID=<null>, allFileIDs=true], minTimestamp=<null>, maxTimestamp=<null>, maxNumberOfResults=<null>, resultAddress=<null>]
Step: Wait for 1 second
Result: Received event: 8323f727: GET_FILE_IDS: FAILED: , Failed to receive responses from all contributors before timeout(500ms). Missing contributors [Pillar1]
Test success: collectionIDIncludedInEventsTest
Test starting: conversationTimeoutTest
Description: Tests the the client handles lack of IdentifyPillarResponses gracefully
Step: Set a 100 ms ConversationTimeout.
Step: Start the operation
Stimuli: Calling getFileIDs(null, null, null, org.bitrepository.client.TestEventHandler@4c9e38)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForGetFileIDsRequest@365553de[correlationID=64dfeacb-65f8-482e-9174-94bd6b1c404f, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-GetFileIDsClientComponentTest-cibuild01, from=conversationTimeoutTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@34a0ef00[fileID=<null>, allFileIDs=true]]
Result: Received event: 64dfeacb: GET_FILE_IDS: IDENTIFY_REQUEST_SENT: , Identifying contributers for get fileIDs
02:19:14.764 WARN o.b.c.c.m.CollectionBasedConversationMediator - Failing timed out conversation 64dfeacb-65f8-482e-9174-94bd6b1c404f (Age 1016ms)
Result: Received event: 64dfeacb: GET_FILE_IDS: FAILED: , Failing timed out conversation 64dfeacb-65f8-482e-9174-94bd6b1c404f
Test success: conversationTimeoutTest
Test starting: identificationFailureTest
Description: Verify that the client works correctly when a contributor sends a failure response.
Step: Start the operation.
Stimuli: Calling getFileIDs(null, null, null, org.bitrepository.client.TestEventHandler@4c9e38)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForGetFileIDsRequest@3bbf9027[correlationID=3f1cda69-a55d-414a-8d18-ba66ea23f142, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-GetFileIDsClientComponentTest-cibuild01, from=identificationFailureTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@10c2064a[fileID=<null>, allFileIDs=true]]
Result: Received event: 3f1cda69: GET_FILE_IDS: IDENTIFY_REQUEST_SENT: , Identifying contributers for get fileIDs
Step: Send a identification response from contributor1 with a FAILURE response code.
Result: Received event: 3f1cda69: GET_FILE_IDS: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: FAILURE
Step: Send a identification response from contributor2 with a IDENTIFICATION_POSITIVE response code .
Result: Received event: 3f1cda69: GET_FILE_IDS: COMPONENT_IDENTIFIED: ContributorID Pillar2
Result: Received event: 3f1cda69: GET_FILE_IDS: IDENTIFICATION_COMPLETE: Contributors: [Pillar2]
Result: Received event: 3f1cda69: GET_FILE_IDS: REQUEST_SENT: ContributorID [Pillar2], Sending request for get fileIDs
Result: Received message on Pillar2_topic-cibuild01 : org.bitrepository.bitrepositorymessages.GetFileIDsRequest@6ff415ad[correlationID=3f1cda69-a55d-414a-8d18-ba66ea23f142, collectionID=TwoPillarCollection, destination=Pillar2_topic-cibuild01, replyTo=TEST-TOPIC-GetFileIDsClientComponentTest-cibuild01, from=identificationFailureTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, pillarID=Pillar2, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@280d9edc[fileID=<null>, allFileIDs=true], minTimestamp=<null>, maxTimestamp=<null>, maxNumberOfResults=<null>, resultAddress=<null>]
Step: Verify that the client continues to the performing phase.
Step: Send a final response message from contributor2
Result: Received event: 3f1cda69: GET_FILE_IDS: COMPONENT_COMPLETE: ContributorID Pillar2, PartialResult=false
Result: Received event: 3f1cda69: GET_FILE_IDS: FAILED: , Failed operation. Cause(s):
[3f1cda69: GET_FILE_IDS: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: FAILURE]
Test success: identificationFailureTest
Test starting: identificationNegativeTest
Description: Verify that the client works correctly when a contributor sends a negative response.
Step: Start the operation.
Stimuli: Calling getFileIDs(null, null, null, org.bitrepository.client.TestEventHandler@4c9e38)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForGetFileIDsRequest@34f392be[correlationID=863bffca-3529-4b1f-bdac-5ac841fcb61d, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-GetFileIDsClientComponentTest-cibuild01, from=identificationNegativeTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@4554de02[fileID=<null>, allFileIDs=true]]
Result: Received event: 863bffca: GET_FILE_IDS: IDENTIFY_REQUEST_SENT: , Identifying contributers for get fileIDs
Step: Send a identification response from contributor1 with a IDENTIFICATION_NEGATIVE response code .
Result: Received event: 863bffca: GET_FILE_IDS: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: IDENTIFICATION_NEGATIVE
Step: Send a identification response from contributor2 with a IDENTIFICATION_POSITIVE response code .
Result: Received event: 863bffca: GET_FILE_IDS: COMPONENT_IDENTIFIED: ContributorID Pillar2
Result: Received event: 863bffca: GET_FILE_IDS: IDENTIFICATION_COMPLETE: Contributors: [Pillar2]
Result: Received event: 863bffca: GET_FILE_IDS: REQUEST_SENT: ContributorID [Pillar2], Sending request for get fileIDs
Result: Received message on Pillar2_topic-cibuild01 : org.bitrepository.bitrepositorymessages.GetFileIDsRequest@fabb651[correlationID=863bffca-3529-4b1f-bdac-5ac841fcb61d, collectionID=TwoPillarCollection, destination=Pillar2_topic-cibuild01, replyTo=TEST-TOPIC-GetFileIDsClientComponentTest-cibuild01, from=identificationNegativeTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, pillarID=Pillar2, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@27e5b378[fileID=<null>, allFileIDs=true], minTimestamp=<null>, maxTimestamp=<null>, maxNumberOfResults=<null>, resultAddress=<null>]
Step: Verify that the client continues to the performing phase.
Step: Send a final response message from contributor2
Result: Received event: 863bffca: GET_FILE_IDS: COMPONENT_COMPLETE: ContributorID Pillar2, PartialResult=false
Result: Received event: 863bffca: GET_FILE_IDS: FAILED: , Failed operation. Cause(s):
[863bffca: GET_FILE_IDS: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: IDENTIFICATION_NEGATIVE]
Test success: identificationNegativeTest
Test starting: noContributorsRespondingTest
Description: Tests the the client handles lack of a IdentifyResponse gracefully. More concrete this means that the occurrence of a identification timeout should be handled correctly
Step: Set a 100 ms timeout for identifying contributors.
Step: Start the operation.
Stimuli: Calling getFileIDs(null, null, null, org.bitrepository.client.TestEventHandler@4c9e38)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForGetFileIDsRequest@42ea287[correlationID=21c50022-ebfd-4322-8634-483d0145f06d, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-GetFileIDsClientComponentTest-cibuild01, from=noContributorsRespondingTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@78cd163b[fileID=<null>, allFileIDs=true]]
Result: Received event: 21c50022: GET_FILE_IDS: IDENTIFY_REQUEST_SENT: , Identifying contributers for get fileIDs
Step: Wait for 1 second
Result: Received event: 21c50022: GET_FILE_IDS: IDENTIFY_TIMEOUT: , Time has run out for looking up contributors
The following contributors didn't respond: [Pillar1, Pillar2]
Result: Received event: 21c50022: GET_FILE_IDS: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: null, Timeout for identifying contributor
Result: Received event: 21c50022: GET_FILE_IDS: COMPONENT_FAILED: ContributorID Pillar2 ResponseCode: null, Timeout for identifying contributor
Result: Received event: 21c50022: GET_FILE_IDS: FAILED: , Unable to continue operation, contributors unavailable.
Test success: noContributorsRespondingTest
Result: The following messages haven't been handled by the testcase:
org.bitrepository.bitrepositorymessages.IdentifyPillarsForGetFileIDsRequest@42ea287[correlationID=21c50022-ebfd-4322-8634-483d0145f06d, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-GetFileIDsClientComponentTest-cibuild01, from=noContributorsRespondingTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@78cd163b[fileID=<null>, allFileIDs=true]]
02:19:18.795 WARN o.b.protocol.bus.MessageReceiver - The following messages haven't been handled by the testcase:
org.bitrepository.bitrepositorymessages.IdentifyPillarsForGetFileIDsRequest@42ea287[correlationID=21c50022-ebfd-4322-8634-483d0145f06d, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-GetFileIDsClientComponentTest-cibuild01, from=noContributorsRespondingTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@78cd163b[fileID=<null>, allFileIDs=true]]
Test starting: oneContributorNotRespondingTest
Description: Verify that the client works correct without receiving identification responses from all contributors.
Added fixture: Set the a identification timeout to 100 ms.
Step: Start the operation.
Stimuli: Calling getFileIDs(null, null, null, org.bitrepository.client.TestEventHandler@4c9e38)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForGetFileIDsRequest@3f1ed068[correlationID=a96c607f-12d1-48e8-b1b0-06f6b5a65d83, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-GetFileIDsClientComponentTest-cibuild01, from=oneContributorNotRespondingTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@753aca85[fileID=<null>, allFileIDs=true]]
Result: Received event: a96c607f: GET_FILE_IDS: IDENTIFY_REQUEST_SENT: , Identifying contributers for get fileIDs
Step: Send a identification response from contributor1.
Result: Received event: a96c607f: GET_FILE_IDS: COMPONENT_IDENTIFIED: ContributorID Pillar1
Step: Wait 1 second.
Result: Received event: a96c607f: GET_FILE_IDS: IDENTIFY_TIMEOUT: , Time has run out for looking up contributors
The following contributors didn't respond: [Pillar2]
Result: Received event: a96c607f: GET_FILE_IDS: COMPONENT_FAILED: ContributorID Pillar2 ResponseCode: null, Timeout for identifying contributor
Result: Received event: a96c607f: GET_FILE_IDS: IDENTIFICATION_COMPLETE: Contributors: [Pillar1]
Result: Received event: a96c607f: GET_FILE_IDS: REQUEST_SENT: ContributorID [Pillar1], Sending request for get fileIDs
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.GetFileIDsRequest@354d70e1[correlationID=a96c607f-12d1-48e8-b1b0-06f6b5a65d83, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-GetFileIDsClientComponentTest-cibuild01, from=oneContributorNotRespondingTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, pillarID=Pillar1, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@3b8a8838[fileID=<null>, allFileIDs=true], minTimestamp=<null>, maxTimestamp=<null>, maxNumberOfResults=<null>, resultAddress=<null>]
Step: Verify that the client continues to the performing phase.
Step: Send a final response upload message
Result: Received event: a96c607f: GET_FILE_IDS: COMPONENT_COMPLETE: ContributorID Pillar1, PartialResult=false
Result: Received event: a96c607f: GET_FILE_IDS: FAILED: , Failed operation. Cause(s):
[a96c607f: GET_FILE_IDS: COMPONENT_FAILED: ContributorID Pillar2 ResponseCode: null, Timeout for identifying contributor]
Test success: oneContributorNotRespondingTest
Test starting: operationTimeoutTest
Description: Tests the the client handles lack of final responses gracefully.
Step: Set a 100 ms operation timeout.
Step: Start the operation
Stimuli: Calling getFileIDs(null, null, null, org.bitrepository.client.TestEventHandler@4c9e38)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForGetFileIDsRequest@61f6d381[correlationID=a40bef91-2baa-4cb6-8cb2-6835f5f2e464, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-GetFileIDsClientComponentTest-cibuild01, from=operationTimeoutTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@656922a0[fileID=<null>, allFileIDs=true]]
Result: Received event: a40bef91: GET_FILE_IDS: IDENTIFY_REQUEST_SENT: , Identifying contributers for get fileIDs
Step: Send positive responses from the pillar1 and a negative response from pillar2
Result: Received event: a40bef91: GET_FILE_IDS: COMPONENT_IDENTIFIED: ContributorID Pillar1
Result: Received event: a40bef91: GET_FILE_IDS: COMPONENT_FAILED: ContributorID Pillar2 ResponseCode: IDENTIFICATION_NEGATIVE
Result: Received event: a40bef91: GET_FILE_IDS: IDENTIFICATION_COMPLETE: Contributors: [Pillar1]
Result: Received event: a40bef91: GET_FILE_IDS: REQUEST_SENT: ContributorID [Pillar1], Sending request for get fileIDs
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.GetFileIDsRequest@2440022a[correlationID=a40bef91-2baa-4cb6-8cb2-6835f5f2e464, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-GetFileIDsClientComponentTest-cibuild01, from=operationTimeoutTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, pillarID=Pillar1, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@737db7f8[fileID=<null>, allFileIDs=true], minTimestamp=<null>, maxTimestamp=<null>, maxNumberOfResults=<null>, resultAddress=<null>]
Step: Wait for 1 second
Result: Received event: a40bef91: GET_FILE_IDS: FAILED: , Failed to receive responses from all contributors before timeout(100ms). Missing contributors [Pillar1]
Test success: operationTimeoutTest
Starting testcase GetChecksumsCmdTest
Test starting: checksumArgumentNonSaltAlgorithmWitoutSaltTest
Description: Test MD5 checksum without salt -> no failure
Test success: checksumArgumentNonSaltAlgorithmWitoutSaltTest
Test starting: checksumArgumentSaltAlgorithmWithSaltTest
Description: Test HMAC_SHA256 checksum with salt -> No failure
Test success: checksumArgumentSaltAlgorithmWithSaltTest
Test starting: defaultSuccessScenarioTest
Description: Tests simplest arguments for running the CmdLineClient
Test success: defaultSuccessScenarioTest
Test starting: fileArgumentTest
Description: Tests the argument for a specific file.
Test success: fileArgumentTest
Test starting: missingCollectionArgumentTest
Description: Tests the scenario, where the collection arguments is missing.
Takes the following arguments:
-p [OPTIONAL] The id of the pillar where the should be performed. If undefined the operations is performed on all pillars.
-R [OPTIONAL] The algorithm of checksum to request in the response from the pillars. If no such argument is given, then the default from settings is retrieved.
-s The path to the directory with the settings files for the client
-c The id for the collection to perform the operation on.
-S [OPTIONAL] The salt of checksum to request in the response. Requires the ChecksumType argument.
-v Makes the client more verbose
-i The id for the file to perform the operation on.
-k The path to the file containing the private key.
Missing argument: c
Test success: missingCollectionArgumentTest
Test starting: specificPillarArgumentTest
Description: Test argument for a specific pillar
Test success: specificPillarArgumentTest
Test starting: unknownPillarArgumentTest
Description: Testing against a non-existing pillar id -> Should fail
Invalid argument: Random1444868363659pillar is not a valid pillar for collection TwoPillarCollection
The collection contains the following pillars: [Pillar1, Pillar2]
Test success: unknownPillarArgumentTest
Test starting: getFileIDsDeliveredAtUrl
Description: Tests the delivery of fileIDs from a pillar at a given URL.
Step: Initialise the variables for this test.
Step: Request the delivery of the file ids of a file from the pillar(s). A callback listener should be supplied.
Stimuli: Calling getFileIDs(null, default-test-file.txt, file:../bitrepository-core/src/test/resources/test-files//TEST-FILE-IDS-DELIVERY.xml, org.bitrepository.client.TestEventHandler@4c9e38)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForGetFileIDsRequest@601d295[correlationID=168ffcb4-297a-4ef5-9871-af5e4c5997c2, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-GetFileIDsClientComponentTest-cibuild01, from=getFileIDsDeliveredAtUrl, to=Pillar1, version=28, minVersion=24, auditTrailInformation=<null>, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@485451d8[fileID=default-test-file.txt, allFileIDs=<null>]]
Result: Received event: 168ffcb4: GET_FILE_IDS for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying contributers for get fileIDs
Step: The pillar sends a response to the identify message.
Result: Received event: 168ffcb4: GET_FILE_IDS for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar1
Result: Received event: 168ffcb4: GET_FILE_IDS for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: [Pillar1]
Result: Received event: 168ffcb4: GET_FILE_IDS for file default-test-file.txt: REQUEST_SENT: ContributorID [Pillar1], Sending request for get fileIDs
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.GetFileIDsRequest@a1e912f[correlationID=168ffcb4-297a-4ef5-9871-af5e4c5997c2, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-GetFileIDsClientComponentTest-cibuild01, from=getFileIDsDeliveredAtUrl, to=Pillar1, version=28, minVersion=24, auditTrailInformation=<null>, pillarID=Pillar1, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@2036f83[fileID=default-test-file.txt, allFileIDs=<null>], minTimestamp=<null>, maxTimestamp=<null>, maxNumberOfResults=<null>, resultAddress=file:../bitrepository-core/src/test/resources/test-files//TEST-FILE-IDS-DELIVERY.xml-Pillar1]
Step: The pillar sends a getFileIDsProgressResponse to the GetFileIDsClient.
Result: Received event: 168ffcb4: GET_FILE_IDS for file default-test-file.txt: PROGRESS: ContributorID Pillar1, First test progress response message
Step: The resulting file is uploaded to the indicated url and the pillar sends a final response upload message
Result: Received event: 168ffcb4: GET_FILE_IDS for file default-test-file.txt: COMPONENT_COMPLETE: ContributorID Pillar1, PartialResult=false
Result: Received event: 168ffcb4: GET_FILE_IDS for file default-test-file.txt: COMPLETE:
Step: Receive and validate event results for the pillar.
Test success: getFileIDsDeliveredAtUrl
Test starting: getFileIDsDeliveredThroughMessage
Description: Tests the delivery of fileIDs from a pillar at a given URL.
Step: Initialise the variables for this test.
Step: Ensure the delivery file isn't already present on the http server
Step: Request the delivery of the file ids of a file from the pillar(s). A callback listener should be supplied.
Stimuli: Calling getFileIDs(null, default-test-file.txt, null, org.bitrepository.client.TestEventHandler@4c9e38)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForGetFileIDsRequest@3e4afd10[correlationID=45ddb772-2f92-4d59-bc6b-fd27b219f39d, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-GetFileIDsClientComponentTest-cibuild01, from=getFileIDsDeliveredThroughMessage, to=Pillar1, version=28, minVersion=24, auditTrailInformation=<null>, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@22aefae0[fileID=default-test-file.txt, allFileIDs=<null>]]
Result: Received event: 45ddb772: GET_FILE_IDS for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying contributers for get fileIDs
Step: The pillar sends a response to the identify message.
Result: Received event: 45ddb772: GET_FILE_IDS for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar1
Result: Received event: 45ddb772: GET_FILE_IDS for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: [Pillar1]
Result: Received event: 45ddb772: GET_FILE_IDS for file default-test-file.txt: REQUEST_SENT: ContributorID [Pillar1], Sending request for get fileIDs
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.GetFileIDsRequest@7440265c[correlationID=45ddb772-2f92-4d59-bc6b-fd27b219f39d, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-GetFileIDsClientComponentTest-cibuild01, from=getFileIDsDeliveredThroughMessage, to=Pillar1, version=28, minVersion=24, auditTrailInformation=<null>, pillarID=Pillar1, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@1d8be7b9[fileID=default-test-file.txt, allFileIDs=<null>], minTimestamp=<null>, maxTimestamp=<null>, maxNumberOfResults=<null>, resultAddress=<null>]
Step: The pillar sends a getFileIDsProgressResponse to the GetFileIDsClient.
Result: Received event: 45ddb772: GET_FILE_IDS for file default-test-file.txt: PROGRESS: ContributorID Pillar1, First test progress response message
Step: The resulting file is uploaded to the indicated url and the pillar sends a final response upload message
Result: Received event: 45ddb772: GET_FILE_IDS for file default-test-file.txt: COMPONENT_COMPLETE: ContributorID Pillar1, NumberOfFileIDs=1, PartialResult=false
Result: Received event: 45ddb772: GET_FILE_IDS for file default-test-file.txt: COMPLETE:
Step: Receive and validate event results for the pillar.
Test success: getFileIDsDeliveredThroughMessage
Test starting: getFileIDsFromOtherCollection
Description: Tests the getFileIDs client will correctly try to get from a second collection if required
Added fixture: Configure collection1 to contain both pillars and collection 2 to only contain pillar2
Step: Request the putting of a file through the PutClient for collection2
Stimuli: Calling getFileIDs(null, default-test-file.txt, null, org.bitrepository.client.TestEventHandler@39acd1f1)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForGetFileIDsRequest@51813065[correlationID=b94da65a-1fbc-4252-b33f-fbf9bd8ccba8, collectionID=SinglePillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-GetFileIDsClientComponentTest-cibuild01, from=getFileIDsFromOtherCollection, to=Pillar2, version=28, minVersion=24, auditTrailInformation=<null>, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@4f581211[fileID=default-test-file.txt, allFileIDs=<null>]]
Result: Received event: b94da65a: GET_FILE_IDS for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying contributers for get fileIDs
Step: Send an identification response from pillar2.
Result: Received event: b94da65a: GET_FILE_IDS for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar2
Result: Received event: b94da65a: GET_FILE_IDS for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: [Pillar2]
Result: Received event: b94da65a: GET_FILE_IDS for file default-test-file.txt: REQUEST_SENT: ContributorID [Pillar2], Sending request for get fileIDs
Result: Received message on Pillar2_topic-cibuild01 : org.bitrepository.bitrepositorymessages.GetFileIDsRequest@51743cc0[correlationID=b94da65a-1fbc-4252-b33f-fbf9bd8ccba8, collectionID=SinglePillarCollection, destination=Pillar2_topic-cibuild01, replyTo=TEST-TOPIC-GetFileIDsClientComponentTest-cibuild01, from=getFileIDsFromOtherCollection, to=Pillar2, version=28, minVersion=24, auditTrailInformation=<null>, pillarID=Pillar2, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@92e2c93[fileID=default-test-file.txt, allFileIDs=<null>], minTimestamp=<null>, maxTimestamp=<null>, maxNumberOfResults=<null>, resultAddress=<null>]
Step: Send a complete event from the pillar
Result: Received event: b94da65a: GET_FILE_IDS for file default-test-file.txt: COMPONENT_COMPLETE: ContributorID Pillar2, PartialResult=false
Result: Received event: b94da65a: GET_FILE_IDS for file default-test-file.txt: COMPLETE:
Test success: getFileIDsFromOtherCollection
Test starting: testNoSuchFile
Description: Testing how a request for a non-existing file is handled.
Step: Setting up variables and such.
Step: Request the delivery of the file id of a file from the pillar(s). A callback listener should be supplied.
Stimuli: Calling getFileIDs(null, default-test-file.txt, file:../bitrepository-core/src/test/resources/test-files//TEST-FILE-IDS-DELIVERY.xml, org.bitrepository.client.TestEventHandler@4c9e38)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForGetFileIDsRequest@54387873[correlationID=9511295c-25be-4c65-8498-ae860c650860, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-GetFileIDsClientComponentTest-cibuild01, from=testNoSuchFile, to=Pillar1, version=28, minVersion=24, auditTrailInformation=<null>, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@3a80c534[fileID=default-test-file.txt, allFileIDs=<null>]]
Result: Received event: 9511295c: GET_FILE_IDS for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying contributers for get fileIDs
Step: The pillar sends a response to the identify message.
Result: Received event: 9511295c: GET_FILE_IDS for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar1
Result: Received event: 9511295c: GET_FILE_IDS for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: [Pillar1]
Result: Received event: 9511295c: GET_FILE_IDS for file default-test-file.txt: REQUEST_SENT: ContributorID [Pillar1], Sending request for get fileIDs
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.GetFileIDsRequest@36e3321e[correlationID=9511295c-25be-4c65-8498-ae860c650860, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-GetFileIDsClientComponentTest-cibuild01, from=testNoSuchFile, to=Pillar1, version=28, minVersion=24, auditTrailInformation=<null>, pillarID=Pillar1, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@218f2f51[fileID=default-test-file.txt, allFileIDs=<null>], minTimestamp=<null>, maxTimestamp=<null>, maxNumberOfResults=<null>, resultAddress=file:../bitrepository-core/src/test/resources/test-files//TEST-FILE-IDS-DELIVERY.xml-Pillar1]
Step: Send a error that the file cannot be found.
Result: Received event: 9511295c: GET_FILE_IDS for file default-test-file.txt: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: FILE_NOT_FOUND_FAILURE, No such file.
Result: Received event: 9511295c: GET_FILE_IDS for file default-test-file.txt: FAILED: , Failed operation. Cause(s):
[9511295c: GET_FILE_IDS for file default-test-file.txt: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: FILE_NOT_FOUND_FAILURE, No such file.]
Test success: testNoSuchFile
Test starting: testPaging
Description: Tests the GetFileIDs client correctly handles functionality for limiting results, either by timestamp or result count.
Step: Request fileIDs from with MinTimestamp, MaxTimestamp, MaxNumberOfResults set for both pillars .
Stimuli: Calling getFileIDs([ContributorQuery{componentID='Pillar1, minTimestamp=Thu Oct 15 02:19:23 CEST 2015, maxTimestamp=Thu Oct 15 02:19:24 CEST 2015, maxNumberOfResults=1}, ContributorQuery{componentID='Pillar2, minTimestamp=Thu Oct 15 02:19:24 CEST 2015, maxTimestamp=Thu Oct 15 02:19:24 CEST 2015, maxNumberOfResults=2}], null, null, org.bitrepository.client.TestEventHandler@4c9e38)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForGetFileIDsRequest@46de118b[correlationID=54c2569d-dbc1-4d3e-b7b7-488d3153102f, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-GetFileIDsClientComponentTest-cibuild01, from=testPaging, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@55682482[fileID=<null>, allFileIDs=true]]
Result: Received event: 54c2569d: GET_FILE_IDS: IDENTIFY_REQUEST_SENT: , Identifying contributers for get fileIDs
Step: Send a IdentifyPillarsForGetFileIDsResponse from both pillars.
Result: Received event: 54c2569d: GET_FILE_IDS: COMPONENT_IDENTIFIED: ContributorID Pillar1
Result: Received event: 54c2569d: GET_FILE_IDS: COMPONENT_IDENTIFIED: ContributorID Pillar2
Result: Received event: 54c2569d: GET_FILE_IDS: IDENTIFICATION_COMPLETE: Contributors: [Pillar2, Pillar1]
Result: Received event: 54c2569d: GET_FILE_IDS: REQUEST_SENT: ContributorID [Pillar1, Pillar2], Sending request for get fileIDs
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.GetFileIDsRequest@4f7ba0af[correlationID=54c2569d-dbc1-4d3e-b7b7-488d3153102f, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-GetFileIDsClientComponentTest-cibuild01, from=testPaging, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, pillarID=Pillar1, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@5b23c1f6[fileID=<null>, allFileIDs=true], minTimestamp=2015-10-15T02:19:23.572+02:00, maxTimestamp=2015-10-15T02:19:24.472+02:00, maxNumberOfResults=1, resultAddress=<null>]
Result: Received message on Pillar2_topic-cibuild01 : org.bitrepository.bitrepositorymessages.GetFileIDsRequest@3f4964f2[correlationID=54c2569d-dbc1-4d3e-b7b7-488d3153102f, collectionID=TwoPillarCollection, destination=Pillar2_topic-cibuild01, replyTo=TEST-TOPIC-GetFileIDsClientComponentTest-cibuild01, from=testPaging, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, pillarID=Pillar2, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@3bf01a01[fileID=<null>, allFileIDs=true], minTimestamp=2015-10-15T02:19:24.472+02:00, maxTimestamp=2015-10-15T02:19:24.572+02:00, maxNumberOfResults=2, resultAddress=<null>]
Test success: testPaging
Test starting: verifyGetFileIDsClientFromFactory
Test success: verifyGetFileIDsClientFromFactory
Starting testcase GetFileIDsCmdTest
Test starting: defaultSuccessScenarioTest
Description: Tests simplest arguments for running the CmdLineClient
Test success: defaultSuccessScenarioTest
Test starting: fileArgumentTest
Description: Tests the argument for a specific file.
Test success: fileArgumentTest
Test starting: missingCollectionArgumentTest
Description: Tests the scenario, where the collection arguments is missing.
Takes the following arguments:
-p [OPTIONAL] The id of the pillar where the should be performed. If undefined the operations is performed on all pillars.
-s The path to the directory with the settings files for the client
-c The id for the collection to perform the operation on.
-v Makes the client more verbose
-i The id for the file to perform the operation on.
-k The path to the file containing the private key.
Missing argument: c
Test success: missingCollectionArgumentTest
Test starting: specificPillarArgumentTest
Description: Test argument for a specific pillar
Test success: specificPillarArgumentTest
Test starting: unknownPillarArgumentTest
Description: Testing against a non-existing pillar id -> Should fail
Invalid argument: Random1444868365981pillar is not a valid pillar for collection TwoPillarCollection
The collection contains the following pillars: [Pillar1, Pillar2]
Test success: unknownPillarArgumentTest
Starting testcase GetStatusClientComponentTest
Test starting: getAllStatuses
Description: Tests the simplest case of getting status for all contributers.
Step: Create a GetStatusClient.
Step: Retrieve from all contributors in the collection
Stimuli: Calling getAuditTrails()
Result: Received event: f362d398: GET_STATUS: IDENTIFY_REQUEST_SENT: , Identifying contributors for getting status
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyContributorsForGetStatusRequest@eb6ccbc[correlationID=f362d398-aca4-47ee-9224-bf280776b7f3, collectionID=<null>, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-GetStatusClientComponentTest-cibuild01, from=getAllStatuses, to=<null>, version=28, minVersion=24, auditTrailInformation=]
Step: Send a identifyResponse from each pillar
Result: Received event: f362d398: GET_STATUS: COMPONENT_IDENTIFIED: ContributorID Pillar1
Result: Received event: f362d398: GET_STATUS: COMPONENT_IDENTIFIED: ContributorID Pillar2
Result: Received event: f362d398: GET_STATUS: IDENTIFICATION_COMPLETE: Contributors: [Pillar2, Pillar1]
Result: Received event: f362d398: GET_STATUS: REQUEST_SENT: ContributorID [Pillar1, Pillar2], Sending GetStatusRequest
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.GetStatusRequest@6f7a65e[correlationID=f362d398-aca4-47ee-9224-bf280776b7f3, collectionID=<null>, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-GetStatusClientComponentTest-cibuild01, from=getAllStatuses, to=<null>, version=28, minVersion=24, auditTrailInformation=, contributor=Pillar1]
Result: Received message on Pillar2_topic-cibuild01 : org.bitrepository.bitrepositorymessages.GetStatusRequest@6e22d6bf[correlationID=f362d398-aca4-47ee-9224-bf280776b7f3, collectionID=<null>, destination=Pillar2_topic-cibuild01, replyTo=TEST-TOPIC-GetStatusClientComponentTest-cibuild01, from=getAllStatuses, to=<null>, version=28, minVersion=24, auditTrailInformation=, contributor=Pillar2]
Step: Send a final response from pillar 1
Result: Received event: f362d398: GET_STATUS: COMPONENT_COMPLETE: ContributorID Pillar1, resulting status: org.bitrepository.bitrepositoryelements.ResultingStatus@4fe9adfb[statusInfo=org.bitrepository.bitrepositoryelements.StatusInfo@f8fe81e[statusCode=OK, statusText=Everythings fine..], statusTimestamp=2015-10-15T02:19:26.309+02:00]
Step: Send a final response from pillar 2
Result: Received event: f362d398: GET_STATUS: COMPONENT_COMPLETE: ContributorID Pillar2, resulting status: org.bitrepository.bitrepositoryelements.ResultingStatus@6ad0cd43[statusInfo=org.bitrepository.bitrepositoryelements.StatusInfo@7de43652[statusCode=OK, statusText=Everythings fine..], statusTimestamp=2015-10-15T02:19:26.310+02:00]
Result: Received event: f362d398: GET_STATUS: COMPLETE:
Test success: getAllStatuses
Test starting: incompleteSetOfIdendifyResponses
Description: Verify that the GetStatus client works correct without receiving responses from all contributers.
Step: Configure 1 second timeout for identifying contributers. The default 2 contributers collection is used
Stimuli: Calling getAuditTrails()
Result: Received event: 63ca1a43: GET_STATUS: IDENTIFY_REQUEST_SENT: , Identifying contributors for getting status
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyContributorsForGetStatusRequest@48a21ea6[correlationID=63ca1a43-8a2f-4e63-a757-2eb9fe30a9b0, collectionID=<null>, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-GetStatusClientComponentTest-cibuild01, from=incompleteSetOfIdendifyResponses, to=<null>, version=28, minVersion=24, auditTrailInformation=]
Step: Send a identifyResponse from pillar 1
Result: Received event: 63ca1a43: GET_STATUS: COMPONENT_IDENTIFIED: ContributorID Pillar1
Step: Wait for timeout event
Result: Received event: 63ca1a43: GET_STATUS: IDENTIFY_TIMEOUT: , Time has run out for looking up contributors
The following contributors didn't respond: [Pillar2]
Result: Received event: 63ca1a43: GET_STATUS: COMPONENT_FAILED: ContributorID Pillar2 ResponseCode: null, Timeout for identifying contributor
Result: Received event: 63ca1a43: GET_STATUS: IDENTIFICATION_COMPLETE: Contributors: [Pillar1]
Result: Received event: 63ca1a43: GET_STATUS: REQUEST_SENT: ContributorID [Pillar1], Sending GetStatusRequest
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.GetStatusRequest@3fb51b91[correlationID=63ca1a43-8a2f-4e63-a757-2eb9fe30a9b0, collectionID=<null>, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-GetStatusClientComponentTest-cibuild01, from=incompleteSetOfIdendifyResponses, to=<null>, version=28, minVersion=24, auditTrailInformation=, contributor=Pillar1]
Test success: incompleteSetOfIdendifyResponses
Test starting: verifyGetStatusClientFromFactory
Test success: verifyGetStatusClientFromFactory
Starting testcase NegativeResponseExceptionTest
Test starting: testNegativeResponse
Description: Test the instantiation of the exception
Step: Setup
Step: Try to throw such an exception with the response code
Test success: testNegativeResponse
Starting testcase ReplaceFileCmdTest
Test starting: URLSuccessScenarioTest
Description: Tests the scenario, where a URL instead of a file is used for the replacement file.
Test success: URLSuccessScenarioTest
Test starting: bothFileAndURLArgumentTest
Description: Tests the scenario, where both arguments for file or url is given.
Invalid argument: Cannot take both a file (-f) and an URL (-u) as argument.
Test success: bothFileAndURLArgumentTest
Test starting: checksumArgumentNonSaltAlgorithmWitoutSaltTest
Description: Test MD5 checksum without salt -> no failure
Test success: checksumArgumentNonSaltAlgorithmWitoutSaltTest
Test starting: checksumArgumentSaltAlgorithmWithSaltTest
Description: Test HMAC_SHA256 checksum with salt -> No failure
Test success: checksumArgumentSaltAlgorithmWithSaltTest
Test starting: defaultSuccessScenarioTest
Description: Tests simplest arguments for running the CmdLineClient
Test success: defaultSuccessScenarioTest
Test starting: missingChecksumForExistingFileWhenUsingFileArgumentTest
Description: Tests the scenario, where no checksum argument is given, but a File is given.
Invalid argument: Checksum argument (-C) are mandatory for Replace and replace operations as defined in RepositorySettings.
Test success: missingChecksumForExistingFileWhenUsingFileArgumentTest
Test starting: missingChecksumForExistingFileWhenUsingURLArgumentTest
Description: Tests the scenario, where no checksum argument is given, but a URL is given.
Invalid argument: Checksum argument (-C) are mandatory for Replace and replace operations as defined in RepositorySettings.
Test success: missingChecksumForExistingFileWhenUsingURLArgumentTest
Test starting: missingChecksumForNewFileWhenUsingFileArgumentTest
Description: Tests the scenario, where no checksum argument is given, but a File is given.
Test success: missingChecksumForNewFileWhenUsingFileArgumentTest
Test starting: missingChecksumForNewFileWhenUsingURLArgumentTest
Description: Tests the scenario, where no checksum argument is given, but a URL is given.
Invalid argument: The URL argument requires also the checksum argument for the file to replace with (-r).
Test success: missingChecksumForNewFileWhenUsingURLArgumentTest
Test starting: missingCollectionArgumentTest
Description: Tests the scenario, where the collection arguments is missing.
Takes the following arguments:
-c The id for the collection to perform the operation on.
-C [OPTIONAL] The checksum of the file to be replaced.
-d If this argument is present, then the file will be removed from the server, when the operation is complete.
-f The path to the new file for the replacement. Required unless using the URL argument.
-i The id for the file to perform the operation on.
-k The path to the file containing the private key.
-p [OPTIONAL] The id of the pillar where the should be performed. If undefined the operations is performed on all pillars.
-r The checksum for the file to replace with. Required when using the URL argument.
-R [OPTIONAL] The algorithm of checksum to request in the response from the pillars.
-s The path to the directory with the settings files for the client
-S [OPTIONAL] The salt of checksum to request in the response. Requires the ChecksumType argument.
-u The URL for the file to be retreived. Is required, unless the actual file is given.
-v Makes the client more verbose
Missing argument: c
Test success: missingCollectionArgumentTest
Test starting: missingFileIDWhenFileArgumentTest
Description: Tests the scenario, where no checksum argument is given, but a URL is given.
Test success: missingFileIDWhenFileArgumentTest
Test starting: missingFileIDWhenURLArgumentTest
Description: Tests the scenario, where no checksum argument is given, but a URL is given.
Invalid argument: The URL argument requires also the argument for the ID of the file (-i).
Test success: missingFileIDWhenURLArgumentTest
Test starting: missingFileOrURLArgumentTest
Description: Tests the scenario, where no arguments for file or url is given.
Invalid argument: Requires either the file argument (-f) or the URL argument (-u).
Test success: missingFileOrURLArgumentTest
Test starting: missingPillarArgumentTest
Description: Tests the different scenarios, with the pillar argument.
Invalid argument: The pillar argument (-p) must defined for the Replace operation, only single pillar Replaces are allowed
Test success: missingPillarArgumentTest
Test starting: unknownPillarArgumentTest
Step: Testing against a non-existing pillar id
Invalid argument: Random1444868372117pillar is not a valid pillar for collection TwoPillarCollection
The collection contains the following pillars: [Pillar1, Pillar2]
Test success: unknownPillarArgumentTest
Starting testcase CommandLineTest
Test starting: argumentsTesterUnknownArgument
Description: Test the handling of arguments by the CommandLineArgumentHandler.
Step: Validate arguments without any options.
Test success: argumentsTesterUnknownArgument
Test starting: argumentsTesterWrongArgument
Description: Test the handling of arguments by the CommandLineArgumentHandler.
Step: Validate the default options
Test success: argumentsTesterWrongArgument
Test starting: newArgumentTester
Description: Test the handling of a new argument.
Step: Test the option
Test success: newArgumentTester
Starting testcase GetFileCmdTest
Test starting: defaultSuccessScenarioTest
Description: Tests simplest arguments for running the CmdLineClient
Test success: defaultSuccessScenarioTest
Test starting: missingCollectionArgumentTest
Description: Tests the scenario, where the collection arguments is missing.
Takes the following arguments:
-p [OPTIONAL] The id of the pillar where the should be performed. If undefined the operations is performed on all pillars.
-s The path to the directory with the settings files for the client
-c The id for the collection to perform the operation on.
-v Makes the client more verbose
-i The id for the file to perform the operation on.
-k The path to the file containing the private key.
-l [OPTIONAL] The location where the file should be placed (either total path or directory). If no argument, then in the directory where the script is located.
Missing argument: c
Test success: missingCollectionArgumentTest
Test starting: missingFileIDArgumentTest
Description: Tests the scenario, where no arguments for file id argument is given.
Takes the following arguments:
-p [OPTIONAL] The id of the pillar where the should be performed. If undefined the operations is performed on all pillars.
-s The path to the directory with the settings files for the client
-c The id for the collection to perform the operation on.
-v Makes the client more verbose
-i The id for the file to perform the operation on.
-k The path to the file containing the private key.
-l [OPTIONAL] The location where the file should be placed (either total path or directory). If no argument, then in the directory where the script is located.
Missing argument: i
Test success: missingFileIDArgumentTest
Test starting: specificPillarArgumentTest
Description: Test argument for a specific pillar
Test success: specificPillarArgumentTest
Test starting: unknownPillarArgumentTest
Description: Testing against a non-existing pillar id -> Should fail
Invalid argument: Random1444868373193pillar is not a valid pillar for collection TwoPillarCollection
The collection contains the following pillars: [Pillar1, Pillar2]
Test success: unknownPillarArgumentTest
Starting testcase PutFileClientComponentTest
Test starting: defaultReturnChecksumsWithChecksumPillar
Description: Tests that PutClient handles the presence of a ChecksumPillar correctly, when a return checksum of default type is requested (which a checksum pillar can provide).
Step: Call putFile while requesting a salted checksum to be returned.
Stimuli: Calling PutFileWithId(file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, default-test-file.txt, 0, null, org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@4bd0d62f[checksumType=MD5, checksumSalt=<null>, otherChecksumType=<null>], org.bitrepository.client.TestEventHandler@71ebd1d9, TEST-AUDIT-TRAIL)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForPutFileRequest@49f82f95[correlationID=cdbef6fd-2303-41d4-88e2-5f458da4938c, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=defaultReturnChecksumsWithChecksumPillar, to=<null>, version=28, minVersion=24, auditTrailInformation=TEST-AUDIT-TRAIL, fileID=default-test-file.txt, fileSize=0]
Result: Received event: cdbef6fd: PUT_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for put file
Step: Send an identification response with a PillarChecksumSpec element set, indicating that this is a checksum pillar.
Result: Received event: cdbef6fd: PUT_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar1
Step: Send an normal identification response from pillar2.
Result: Received event: cdbef6fd: PUT_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar2
Result: Received event: cdbef6fd: PUT_FILE for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: [Pillar1, Pillar2]
Result: Received event: cdbef6fd: PUT_FILE for file default-test-file.txt: REQUEST_SENT: ContributorID [Pillar1, Pillar2], Sending request for put file
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.PutFileRequest@19ad99fa[correlationID=cdbef6fd-2303-41d4-88e2-5f458da4938c, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=defaultReturnChecksumsWithChecksumPillar, to=<null>, version=28, minVersion=24, auditTrailInformation=TEST-AUDIT-TRAIL, pillarID=Pillar1, fileID=default-test-file.txt, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, fileSize=0, checksumDataForNewFile=<null>, checksumRequestForNewFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@4bd0d62f[checksumType=MD5, checksumSalt=<null>, otherChecksumType=<null>]]
Result: Received message on Pillar2_topic-cibuild01 : org.bitrepository.bitrepositorymessages.PutFileRequest@32a53a59[correlationID=cdbef6fd-2303-41d4-88e2-5f458da4938c, collectionID=TwoPillarCollection, destination=Pillar2_topic-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=defaultReturnChecksumsWithChecksumPillar, to=<null>, version=28, minVersion=24, auditTrailInformation=TEST-AUDIT-TRAIL, pillarID=Pillar2, fileID=default-test-file.txt, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, fileSize=0, checksumDataForNewFile=<null>, checksumRequestForNewFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@4bd0d62f[checksumType=MD5, checksumSalt=<null>, otherChecksumType=<null>]]
Test success: defaultReturnChecksumsWithChecksumPillar
Test starting: fileExistsOnPillarChecksumFromPillarNoClientChecksum
Description: Tests that PutClient handles the presence of a file correctly, when the pillar returns a checksum but the putFile was called without a checksum.
Step: Call putFile.
Stimuli: Calling PutFileWithId(file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, default-test-file.txt, 0, null, null, org.bitrepository.client.TestEventHandler@64db8a3, TEST-AUDIT-TRAIL)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForPutFileRequest@554b571b[correlationID=b033be06-3d35-4df1-ba29-197b13f5cff9, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=fileExistsOnPillarChecksumFromPillarNoClientChecksum, to=<null>, version=28, minVersion=24, auditTrailInformation=TEST-AUDIT-TRAIL, fileID=default-test-file.txt, fileSize=0]
Result: Received event: b033be06: PUT_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for put file
Step: Send a DUPLICATE_FILE_FAILURE response with a random checksum.
Result: Received event: b033be06: PUT_FILE for file default-test-file.txt: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: DUPLICATE_FILE_FAILURE, Received negative response from component Pillar1: org.bitrepository.bitrepositoryelements.ResponseInfo@5002fc11[responseCode=DUPLICATE_FILE_FAILURE, responseText=Testing the handling of 'DUPLICATE FILE' identification.] (existing file checksum does not match)
Result: Received event: b033be06: PUT_FILE for file default-test-file.txt: FAILED: , Can not put file default-test-file.txt, as an different file already exists on pillar Pillar1
Test success: fileExistsOnPillarChecksumFromPillarNoClientChecksum
Test starting: fileExistsOnPillarDifferentChecksumFromPillar
Description: Tests that PutClient handles the presence of a file correctly, when the pillar returns a checksum different from the file being put.
Step: Call putFile.
Stimuli: Calling PutFileWithId(file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, default-test-file.txt, 0, org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@3f9167f7[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@6a72d301[checksumType=MD5, checksumSalt=<null>, otherChecksumType=<null>], checksumValue={-70}, calculationTimestamp=2015-10-15T02:19:33.703+02:00], null, org.bitrepository.client.TestEventHandler@4d6f83a5, TEST-AUDIT-TRAIL)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForPutFileRequest@24bc7abd[correlationID=72238451-3b2a-4d98-8774-6065509a2c45, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=fileExistsOnPillarDifferentChecksumFromPillar, to=<null>, version=28, minVersion=24, auditTrailInformation=TEST-AUDIT-TRAIL, fileID=default-test-file.txt, fileSize=0]
Result: Received event: 72238451: PUT_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for put file
Step: Send a DUPLICATE_FILE_FAILURE response with a random checksum.
Result: Received event: 72238451: PUT_FILE for file default-test-file.txt: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: DUPLICATE_FILE_FAILURE, Received negative response from component Pillar1: org.bitrepository.bitrepositoryelements.ResponseInfo@5df3f854[responseCode=DUPLICATE_FILE_FAILURE, responseText=Testing the handling of 'DUPLICATE FILE' identification.] (existing file checksum does not match)
Result: Received event: 72238451: PUT_FILE for file default-test-file.txt: FAILED: , Can not put file default-test-file.txt, as an different file already exists on pillar Pillar1
Test success: fileExistsOnPillarDifferentChecksumFromPillar
Test starting: fileExistsOnPillarNoChecksumFromPillar
Description: Tests that PutClient handles the presence of a file correctly, when the pillar doesn't return a checksum in the identification response.
Step: Call putFile.
Stimuli: Calling PutFileWithId(file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, default-test-file.txt, 0, null, null, org.bitrepository.client.TestEventHandler@2fc2305a, TEST-AUDIT-TRAIL)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForPutFileRequest@72c50c9f[correlationID=f0005c8a-9846-4e91-98f5-227bb7d9a6ba, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=fileExistsOnPillarNoChecksumFromPillar, to=<null>, version=28, minVersion=24, auditTrailInformation=TEST-AUDIT-TRAIL, fileID=default-test-file.txt, fileSize=0]
Result: Received event: f0005c8a: PUT_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for put file
Step: Send a DUPLICATE_FILE_FAILURE response without a checksum.
Result: Received event: f0005c8a: PUT_FILE for file default-test-file.txt: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: DUPLICATE_FILE_FAILURE, Received negative response from component Pillar1: org.bitrepository.bitrepositoryelements.ResponseInfo@5e5e680b[responseCode=DUPLICATE_FILE_FAILURE, responseText=Testing the handling of 'DUPLICATE FILE' identification.]
Result: Received event: f0005c8a: PUT_FILE for file default-test-file.txt: FAILED: , Can not put file default-test-file.txt, as an file already exists on pillar Pillar1
Test success: fileExistsOnPillarNoChecksumFromPillar
Test starting: noPillarsResponding
Description: Tests the handling of missing identification responses from all pillar
Added fixture: Sets the identification timeout to 100 ms.
Step: Request the putting of a file through the PutClient
Stimuli: Calling PutFileWithId(file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, default-test-file.txt, 0, null, null, org.bitrepository.client.TestEventHandler@2f22049d, null)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForPutFileRequest@60cb3ca9[correlationID=d6b0bd2e-5704-4e18-9795-826f4b682ebf, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=noPillarsResponding, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, fileID=default-test-file.txt, fileSize=0]
Result: Received event: d6b0bd2e: PUT_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for put file
Step: Do not respond. Just await the timeout.
Result: Received event: d6b0bd2e: PUT_FILE for file default-test-file.txt: IDENTIFY_TIMEOUT: , Time has run out for looking up contributors
The following contributors didn't respond: [Pillar1, Pillar2]
Result: Received event: d6b0bd2e: PUT_FILE for file default-test-file.txt: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: null, Timeout for identifying contributor
Result: Received event: d6b0bd2e: PUT_FILE for file default-test-file.txt: COMPONENT_FAILED: ContributorID Pillar2 ResponseCode: null, Timeout for identifying contributor
Result: Received event: d6b0bd2e: PUT_FILE for file default-test-file.txt: FAILED: , Unable to continue operation, contributors unavailable.
Test success: noPillarsResponding
Test starting: noReturnChecksumsWithChecksumPillar
Description: Tests that PutClient handles the presence of a ChecksumPillar correctly, when no return checksum is requested.
Step: Call putFile while requesting a salted checksum to be returned.
Stimuli: Calling PutFileWithId(file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, default-test-file.txt, 0, null, null, org.bitrepository.client.TestEventHandler@6a4c9d1b, TEST-AUDIT-TRAIL)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForPutFileRequest@54ba4f78[correlationID=10503545-5ab4-4847-b276-9cfae46b0048, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=noReturnChecksumsWithChecksumPillar, to=<null>, version=28, minVersion=24, auditTrailInformation=TEST-AUDIT-TRAIL, fileID=default-test-file.txt, fileSize=0]
Result: Received event: 10503545: PUT_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for put file
Step: Send an identification response with a PillarChecksumSpec element set, indicating that this is a checksum pillar.
Result: Received event: 10503545: PUT_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar1
Step: Send an normal identification response from pillar2.
Result: Received event: 10503545: PUT_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar2
Result: Received event: 10503545: PUT_FILE for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: [Pillar2, Pillar1]
Result: Received event: 10503545: PUT_FILE for file default-test-file.txt: REQUEST_SENT: ContributorID [Pillar1, Pillar2], Sending request for put file
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.PutFileRequest@2852fb2a[correlationID=10503545-5ab4-4847-b276-9cfae46b0048, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=noReturnChecksumsWithChecksumPillar, to=<null>, version=28, minVersion=24, auditTrailInformation=TEST-AUDIT-TRAIL, pillarID=Pillar1, fileID=default-test-file.txt, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, fileSize=0, checksumDataForNewFile=<null>, checksumRequestForNewFile=<null>]
Result: Received message on Pillar2_topic-cibuild01 : org.bitrepository.bitrepositorymessages.PutFileRequest@2e15a0d7[correlationID=10503545-5ab4-4847-b276-9cfae46b0048, collectionID=TwoPillarCollection, destination=Pillar2_topic-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=noReturnChecksumsWithChecksumPillar, to=<null>, version=28, minVersion=24, auditTrailInformation=TEST-AUDIT-TRAIL, pillarID=Pillar2, fileID=default-test-file.txt, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, fileSize=0, checksumDataForNewFile=<null>, checksumRequestForNewFile=<null>]
Test success: noReturnChecksumsWithChecksumPillar
Test starting: normalPutFile
Description: Tests the PutClient. Makes a whole conversation for the put client for a 'good' scenario.
Added fixture: Initialise the number of pillars to one
Step: Ensure that the test-file is placed on the HTTP server.
Step: Request the delivery of a file from a specific pillar. A callback listener should be supplied.
Stimuli: Calling PutFileWithId(file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, default-test-file.txt, 0, null, null, org.bitrepository.client.TestEventHandler@93bc1be, null)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForPutFileRequest@4499e444[correlationID=bc0e7ed9-ccdf-43ba-8f09-1153471d6775, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=normalPutFile, to=Pillar1, version=28, minVersion=24, auditTrailInformation=<null>, fileID=default-test-file.txt, fileSize=0]
Result: Received event: bc0e7ed9: PUT_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for put file
Step: Make response for the pillar.
Result: Received event: bc0e7ed9: PUT_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar1
Result: Received event: bc0e7ed9: PUT_FILE for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: [Pillar1]
Result: Received event: bc0e7ed9: PUT_FILE for file default-test-file.txt: REQUEST_SENT: ContributorID [Pillar1], Sending request for put file
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.PutFileRequest@305f321f[correlationID=bc0e7ed9-ccdf-43ba-8f09-1153471d6775, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=normalPutFile, to=Pillar1, version=28, minVersion=24, auditTrailInformation=<null>, pillarID=Pillar1, fileID=default-test-file.txt, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, fileSize=0, checksumDataForNewFile=<null>, checksumRequestForNewFile=<null>]
Step: Validate the steps of the PutClient by going through the events.
Step: The pillar sends a progress response to the PutClient.
Result: Received event: bc0e7ed9: PUT_FILE for file default-test-file.txt: PROGRESS: ContributorID Pillar1, First test progress response message
Step: Send a final response message to the PutClient.
Result: Received event: bc0e7ed9: PUT_FILE for file default-test-file.txt: COMPONENT_COMPLETE: ContributorID Pillar1, requestedChecksumResult=null
Result: Received event: bc0e7ed9: PUT_FILE for file default-test-file.txt: COMPLETE:
Test success: normalPutFile
Test starting: onePillarPutRetryFailure
Reference: <a href=https://sbforge.org/jira/browse/BITMAG-810>BITMAG-810 Reference client should be able to retry failed file transfers</a>
Description: Tests that a putfile attempt failing due to FILE_TRANSFER_FAILURE is only attempted the maximum allowed attempts
Added fixture: Sets the identification timeout to 3 sec, allow two retries and only register one pillar.
Step: Request the putting of a file through the PutClient
Stimuli: Calling PutFileWithId(file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, default-test-file.txt, 0, null, null, org.bitrepository.client.TestEventHandler@4e5563ef, null)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForPutFileRequest@82134e4[correlationID=1b89a8e4-f1b7-4c48-9a41-34ecdb37965a, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=onePillarPutRetryFailure, to=Pillar1, version=28, minVersion=24, auditTrailInformation=<null>, fileID=default-test-file.txt, fileSize=0]
Result: Received event: 1b89a8e4: PUT_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for put file
Step: Send an identification response from the one pillar.
Result: Received event: 1b89a8e4: PUT_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar1
Result: Received event: 1b89a8e4: PUT_FILE for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: [Pillar1]
Result: Received event: 1b89a8e4: PUT_FILE for file default-test-file.txt: REQUEST_SENT: ContributorID [Pillar1], Sending request for put file
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.PutFileRequest@1d9a80d8[correlationID=1b89a8e4-f1b7-4c48-9a41-34ecdb37965a, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=onePillarPutRetryFailure, to=Pillar1, version=28, minVersion=24, auditTrailInformation=<null>, pillarID=Pillar1, fileID=default-test-file.txt, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, fileSize=0, checksumDataForNewFile=<null>, checksumRequestForNewFile=<null>]
Step: The client should proceed to send a putFileOperation request to the responding pillar.
Step: Send a PutFileFinalResponse indicating a FILE_TRANSFER_FAILURE
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.PutFileRequest@78b5c29f[correlationID=1b89a8e4-f1b7-4c48-9a41-34ecdb37965a, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=onePillarPutRetryFailure, to=Pillar1, version=28, minVersion=24, auditTrailInformation=<null>, pillarID=Pillar1, fileID=default-test-file.txt, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, fileSize=0, checksumDataForNewFile=<null>, checksumRequestForNewFile=<null>]
Result: Received event: 1b89a8e4: PUT_FILE for file default-test-file.txt: WARNING: ContributorID Pillar1, Retrying putfile (attempt number 2)
Step: Send a PutFileFinalResponse indicating a FILE_TRANSFER_FAILURE for the second put attempt
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.PutFileRequest@79b24f79[correlationID=1b89a8e4-f1b7-4c48-9a41-34ecdb37965a, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=onePillarPutRetryFailure, to=Pillar1, version=28, minVersion=24, auditTrailInformation=<null>, pillarID=Pillar1, fileID=default-test-file.txt, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, fileSize=0, checksumDataForNewFile=<null>, checksumRequestForNewFile=<null>]
Result: Received event: 1b89a8e4: PUT_FILE for file default-test-file.txt: WARNING: ContributorID Pillar1, Retrying putfile (attempt number 3)
Step: Send a PutFileFinalResponse indicating a FILE_TRANSFER_FAILURE for the third put attempt
Result: Received event: 1b89a8e4: PUT_FILE for file default-test-file.txt: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: FILE_TRANSFER_FAILURE
Result: Received event: 1b89a8e4: PUT_FILE for file default-test-file.txt: FAILED: , Failed operation. Cause(s):
[1b89a8e4: PUT_FILE for file default-test-file.txt: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: FILE_TRANSFER_FAILURE]
Test success: onePillarPutRetryFailure
Test starting: onePillarPutRetrySuccess
Reference: <a href=https://sbforge.org/jira/browse/BITMAG-810>BITMAG-810 Reference client should be able to retry failed file transfers</a>
Description: Tests the handling of a failed transmission when retry is allowed
Added fixture: Sets the identification timeout to 3 sec, allow two retries and only register one pillar.
Step: Request the putting of a file through the PutClient
Stimuli: Calling PutFileWithId(file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, default-test-file.txt, 0, null, null, org.bitrepository.client.TestEventHandler@26b78c2, null)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForPutFileRequest@4b0fdbd7[correlationID=2ab08111-31f5-4bdd-a781-3a08ec06dfbc, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=onePillarPutRetrySuccess, to=Pillar1, version=28, minVersion=24, auditTrailInformation=<null>, fileID=default-test-file.txt, fileSize=0]
Result: Received event: 2ab08111: PUT_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for put file
Step: Send an identification response from the one pillar.
Result: Received event: 2ab08111: PUT_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar1
Result: Received event: 2ab08111: PUT_FILE for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: [Pillar1]
Result: Received event: 2ab08111: PUT_FILE for file default-test-file.txt: REQUEST_SENT: ContributorID [Pillar1], Sending request for put file
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.PutFileRequest@6400e810[correlationID=2ab08111-31f5-4bdd-a781-3a08ec06dfbc, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=onePillarPutRetrySuccess, to=Pillar1, version=28, minVersion=24, auditTrailInformation=<null>, pillarID=Pillar1, fileID=default-test-file.txt, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, fileSize=0, checksumDataForNewFile=<null>, checksumRequestForNewFile=<null>]
Step: The client should proceed to send a putFileOperation request to the responding pillar.
Step: Send a PutFileFinalResponse indicating a FILE_TRANSFER_FAILURE
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.PutFileRequest@3d74313a[correlationID=2ab08111-31f5-4bdd-a781-3a08ec06dfbc, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=onePillarPutRetrySuccess, to=Pillar1, version=28, minVersion=24, auditTrailInformation=<null>, pillarID=Pillar1, fileID=default-test-file.txt, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, fileSize=0, checksumDataForNewFile=<null>, checksumRequestForNewFile=<null>]
Result: Received event: 2ab08111: PUT_FILE for file default-test-file.txt: WARNING: ContributorID Pillar1, Retrying putfile (attempt number 2)
Step: A new PutFileRequest is send, pillar responds with success
Result: Received event: 2ab08111: PUT_FILE for file default-test-file.txt: COMPONENT_COMPLETE: ContributorID Pillar1, requestedChecksumResult=null
Result: Received event: 2ab08111: PUT_FILE for file default-test-file.txt: COMPLETE:
Test success: onePillarPutRetrySuccess
Test starting: onePillarRespondingWithPartialPutAllowed
Reference: <a href=https://sbforge.org/jira/browse/BITMAG-598>BITMAG-598 It should be possible to putFiles, even though only a subset of the pillars are available</a>
Description: Tests the handling of missing identification responses from one pillar, when partial put are allowed
Added fixture: Sets the identification timeout to 100 ms and allow partial puts.
Step: Request the putting of a file through the PutClient
Stimuli: Calling PutFileWithId(file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, default-test-file.txt, 0, null, null, org.bitrepository.client.TestEventHandler@56567e9b, null)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForPutFileRequest@130cad14[correlationID=b76c02e5-aee5-4448-9f53-967b5a31bcbd, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=onePillarRespondingWithPartialPutAllowed, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, fileID=default-test-file.txt, fileSize=0]
Result: Received event: b76c02e5: PUT_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for put file
Step: Only send an identification response from one pillar.
Result: Received event: b76c02e5: PUT_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar1
Step: Await the timeout.
Result: Received event: b76c02e5: PUT_FILE for file default-test-file.txt: IDENTIFY_TIMEOUT: , Time has run out for looking up contributors
The following contributors didn't respond: [Pillar2]
Result: Received event: b76c02e5: PUT_FILE for file default-test-file.txt: COMPONENT_FAILED: ContributorID Pillar2 ResponseCode: null, Timeout for identifying contributor
Result: Received event: b76c02e5: PUT_FILE for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: [Pillar1]
Result: Received event: b76c02e5: PUT_FILE for file default-test-file.txt: REQUEST_SENT: ContributorID [Pillar1], Sending request for put file
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.PutFileRequest@7ab78203[correlationID=b76c02e5-aee5-4448-9f53-967b5a31bcbd, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=onePillarRespondingWithPartialPutAllowed, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, pillarID=Pillar1, fileID=default-test-file.txt, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, fileSize=0, checksumDataForNewFile=<null>, checksumRequestForNewFile=<null>]
Step: The client should proceed to send a putFileOperation request to the responding pillar.
Step: Send a pillar complete event
Result: Received event: b76c02e5: PUT_FILE for file default-test-file.txt: COMPONENT_COMPLETE: ContributorID Pillar1, requestedChecksumResult=null
Result: Received event: b76c02e5: PUT_FILE for file default-test-file.txt: FAILED: , Failed operation. Cause(s):
[b76c02e5: PUT_FILE for file default-test-file.txt: COMPONENT_FAILED: ContributorID Pillar2 ResponseCode: null, Timeout for identifying contributor]
Test success: onePillarRespondingWithPartialPutAllowed
Test starting: onePillarRespondingWithPartialPutDisallowed
Description: Tests the handling of missing identification responses from one pillar, when partial put are allowed
Added fixture: Sets the identification timeout to 100 ms and disallow partial puts.
Step: Request the putting of a file through the PutClient
Stimuli: Calling PutFileWithId(file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, default-test-file.txt, 0, null, null, org.bitrepository.client.TestEventHandler@1c1ab84e, null)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForPutFileRequest@1b00f65a[correlationID=9074aa1f-8aba-4a04-a756-4d824bde55b1, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=onePillarRespondingWithPartialPutDisallowed, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, fileID=default-test-file.txt, fileSize=0]
Result: Received event: 9074aa1f: PUT_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for put file
Step: Only send an identification response from one pillar.
Result: Received event: 9074aa1f: PUT_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar1
Step: Await the timeout.
Result: Received event: 9074aa1f: PUT_FILE for file default-test-file.txt: IDENTIFY_TIMEOUT: , Time has run out for looking up contributors
The following contributors didn't respond: [Pillar2]
Result: Received event: 9074aa1f: PUT_FILE for file default-test-file.txt: COMPONENT_FAILED: ContributorID Pillar2 ResponseCode: null, Timeout for identifying contributor
Result: Received event: 9074aa1f: PUT_FILE for file default-test-file.txt: FAILED: , Unable to continue operation, contributors unavailable.
Test success: onePillarRespondingWithPartialPutDisallowed
Test starting: putClientOperationTimeout
Description: Tests the handling of a failed operation for the PutClient
Step: Initialise the number of pillars and the PutClient. Sets the operation timeout to 100 ms.
Step: Request the putting of a file through the PutClient
Stimuli: Calling PutFileWithId(file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, default-test-file.txt, 0, null, null, org.bitrepository.client.TestEventHandler@96effb1, null)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForPutFileRequest@39eab380[correlationID=c23ca590-8672-4598-8e19-6affbba58004, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=putClientOperationTimeout, to=Pillar1, version=28, minVersion=24, auditTrailInformation=<null>, fileID=default-test-file.txt, fileSize=0]
Result: Received event: c23ca590: PUT_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for put file
Step: Make response for the pillar.
Result: Received event: c23ca590: PUT_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar1
Result: Received event: c23ca590: PUT_FILE for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: [Pillar1]
Result: Received event: c23ca590: PUT_FILE for file default-test-file.txt: REQUEST_SENT: ContributorID [Pillar1], Sending request for put file
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.PutFileRequest@29abba49[correlationID=c23ca590-8672-4598-8e19-6affbba58004, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=putClientOperationTimeout, to=Pillar1, version=28, minVersion=24, auditTrailInformation=<null>, pillarID=Pillar1, fileID=default-test-file.txt, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, fileSize=0, checksumDataForNewFile=<null>, checksumRequestForNewFile=<null>]
Step: Validate the steps of the PutClient by going through the events.
Step: Do not respond. Just await the timeout.
Result: Received event: c23ca590: PUT_FILE for file default-test-file.txt: FAILED: , Failed to receive responses from all contributors before timeout(100ms). Missing contributors [Pillar1]
Test success: putClientOperationTimeout
Test starting: putClientPillarOperationFailed
Description: Tests the handling of a operation failure for the PutClient.
Step: Initialise the number of pillars to one
Step: Ensure that the test-file is placed on the HTTP server.
Step: Request the delivery of a file from a specific pillar. A callback listener should be supplied.
Stimuli: Calling PutFileWithId(file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, default-test-file.txt, 0, null, null, org.bitrepository.client.TestEventHandler@5b152082, TEST-AUDIT-TRAIL)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForPutFileRequest@5b4c2959[correlationID=7017d054-7d12-4c7b-a755-fe301262fa53, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=putClientPillarOperationFailed, to=Pillar1, version=28, minVersion=24, auditTrailInformation=TEST-AUDIT-TRAIL, fileID=default-test-file.txt, fileSize=0]
Result: Received event: 7017d054: PUT_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for put file
Step: Send pillar response.
Result: Received event: 7017d054: PUT_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar1
Result: Received event: 7017d054: PUT_FILE for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: [Pillar1]
Result: Received event: 7017d054: PUT_FILE for file default-test-file.txt: REQUEST_SENT: ContributorID [Pillar1], Sending request for put file
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.PutFileRequest@3d1f6213[correlationID=7017d054-7d12-4c7b-a755-fe301262fa53, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=putClientPillarOperationFailed, to=Pillar1, version=28, minVersion=24, auditTrailInformation=TEST-AUDIT-TRAIL, pillarID=Pillar1, fileID=default-test-file.txt, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, fileSize=0, checksumDataForNewFile=<null>, checksumRequestForNewFile=<null>]
Step: Validate the steps of the PutClient by going through the events.
Step: Send a failed response message to the PutClient.
Result: Received event: 7017d054: PUT_FILE for file default-test-file.txt: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: FAILURE, Verifying that a failure can be understood!
Result: Received event: 7017d054: PUT_FILE for file default-test-file.txt: FAILED: , Failed operation. Cause(s):
[7017d054: PUT_FILE for file default-test-file.txt: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: FAILURE, Verifying that a failure can be understood!]
Test success: putClientPillarOperationFailed
Test starting: putToOtherCollection
Reference: <a href=https://sbforge.org/jira/browse/BITMAG-925>BITMAG-925 Client will always try to put to the pillars defined in the first collection</a>
Description: Tests the putFIle client will correctly try to put to a second collection if required
Added fixture: Sets the identification timeout to 3 sec, allow two retries and only register one pillar.
Added fixture: Configure collection1 to contain both pillars and collection 2 to only contain pillar2
Step: Request the putting of a file through the PutClient for collection2
Stimuli: Calling PutFileWithId(file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, default-test-file.txt, 0, null, null, org.bitrepository.client.TestEventHandler@54af73bd, null)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForPutFileRequest@5fd38a68[correlationID=568663c4-aa04-4b71-a6bb-d8194b038db4, collectionID=SinglePillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=putToOtherCollection, to=Pillar2, version=28, minVersion=24, auditTrailInformation=<null>, fileID=default-test-file.txt, fileSize=0]
Result: Received event: 568663c4: PUT_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for put file
Step: Send an identification response from pillar2.
Result: Received event: 568663c4: PUT_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar2
Result: Received event: 568663c4: PUT_FILE for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: [Pillar2]
Result: Received event: 568663c4: PUT_FILE for file default-test-file.txt: REQUEST_SENT: ContributorID [Pillar2], Sending request for put file
Result: Received message on Pillar2_topic-cibuild01 : org.bitrepository.bitrepositorymessages.PutFileRequest@3c7ac542[correlationID=568663c4-aa04-4b71-a6bb-d8194b038db4, collectionID=SinglePillarCollection, destination=Pillar2_topic-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=putToOtherCollection, to=Pillar2, version=28, minVersion=24, auditTrailInformation=<null>, pillarID=Pillar2, fileID=default-test-file.txt, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, fileSize=0, checksumDataForNewFile=<null>, checksumRequestForNewFile=<null>]
Step: Send a put complete event from the pillar
Result: Received event: 568663c4: PUT_FILE for file default-test-file.txt: COMPONENT_COMPLETE: ContributorID Pillar2, requestedChecksumResult=null
Result: Received event: 568663c4: PUT_FILE for file default-test-file.txt: COMPLETE:
Test success: putToOtherCollection
Test starting: saltedReturnChecksumsWithChecksumPillar
Description: Tests that PutClient handles the presence of a ChecksumPillar correctly, when a salted return checksum (which a checksum pillar can't provide) is requested.
Reference: <a href="https://sbforge.org/jira/browse/BITMAG-677">BITMAG-677put, replace and delete clients fails if return checksums are requested and a checksumpillar is involved</a>
Step: Call putFile while requesting a salted checksum to be returned.
Stimuli: Calling PutFileWithId(file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, default-test-file.txt, 0, null, org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@2275d28a[checksumType=HMAC_MD5, checksumSalt={-86}, otherChecksumType=<null>], org.bitrepository.client.TestEventHandler@598dca0a, TEST-AUDIT-TRAIL)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForPutFileRequest@1b38563a[correlationID=1103604e-867d-45be-a2f7-aa10f127a998, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=saltedReturnChecksumsWithChecksumPillar, to=<null>, version=28, minVersion=24, auditTrailInformation=TEST-AUDIT-TRAIL, fileID=default-test-file.txt, fileSize=0]
Result: Received event: 1103604e: PUT_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for put file
Step: Send an identification response with a PillarChecksumSpec element set, indicating that this is a checksum pillar.
Result: Received event: 1103604e: PUT_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar1
Step: Send an normal identification response from pillar2.
Result: Received event: 1103604e: PUT_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar2
Result: Received event: 1103604e: PUT_FILE for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: [Pillar2, Pillar1]
Result: Received event: 1103604e: PUT_FILE for file default-test-file.txt: REQUEST_SENT: ContributorID [Pillar1, Pillar2], Sending request for put file
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.PutFileRequest@3a40e068[correlationID=1103604e-867d-45be-a2f7-aa10f127a998, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=saltedReturnChecksumsWithChecksumPillar, to=<null>, version=28, minVersion=24, auditTrailInformation=TEST-AUDIT-TRAIL, pillarID=Pillar1, fileID=default-test-file.txt, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, fileSize=0, checksumDataForNewFile=<null>, checksumRequestForNewFile=<null>]
Result: Received message on Pillar2_topic-cibuild01 : org.bitrepository.bitrepositorymessages.PutFileRequest@6390f89c[correlationID=1103604e-867d-45be-a2f7-aa10f127a998, collectionID=TwoPillarCollection, destination=Pillar2_topic-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=saltedReturnChecksumsWithChecksumPillar, to=<null>, version=28, minVersion=24, auditTrailInformation=TEST-AUDIT-TRAIL, pillarID=Pillar2, fileID=default-test-file.txt, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, fileSize=0, checksumDataForNewFile=<null>, checksumRequestForNewFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@2275d28a[checksumType=HMAC_MD5, checksumSalt={-86}, otherChecksumType=<null>]]
Test success: saltedReturnChecksumsWithChecksumPillar
Test starting: sameFileExistsOnOnePillar
Description: Tests that PutClient handles the presence of a file correctly, when the pillar returns a checksum equal the file being put (idempotent).
Step: Call putFile.
Stimuli: Calling PutFileWithId(file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, default-test-file.txt, 0, org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@464fecb1[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@5a5d16c2[checksumType=MD5, checksumSalt=<null>, otherChecksumType=<null>], checksumValue={-108,10,81,-78,80,-25,-86,-126,-40,-24,-22,49,33,127,-14,103}, calculationTimestamp=2015-10-15T02:19:37.589+02:00], null, org.bitrepository.client.TestEventHandler@55c9400d, TEST-AUDIT-TRAIL)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForPutFileRequest@650d95e6[correlationID=69c6f4bc-0929-4540-8fed-f147258f45a8, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=sameFileExistsOnOnePillar, to=<null>, version=28, minVersion=24, auditTrailInformation=TEST-AUDIT-TRAIL, fileID=default-test-file.txt, fileSize=0]
Result: Received event: 69c6f4bc: PUT_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for put file
Step: Send a DUPLICATE_FILE_FAILURE response with a checksum equal to the one supplied to the client.
Result: Received event: 69c6f4bc: PUT_FILE for file default-test-file.txt: COMPONENT_COMPLETE: ContributorID Pillar1, requestedChecksumResult=org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@783ac459[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@5232be9b[checksumType=MD5, checksumSalt=<null>, otherChecksumType=<null>], checksumValue={-108,10,81,-78,80,-25,-86,-126,-40,-24,-22,49,33,127,-14,103}, calculationTimestamp=2015-10-15T02:19:37.606+02:00], File already existed on Pillar1
Step: Send an identification response from the second pillar.
Result: Received event: 69c6f4bc: PUT_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar2
Result: Received event: 69c6f4bc: PUT_FILE for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: [Pillar2]
Result: Received event: 69c6f4bc: PUT_FILE for file default-test-file.txt: REQUEST_SENT: ContributorID [Pillar2], Sending request for put file
Result: Received message on Pillar2_topic-cibuild01 : org.bitrepository.bitrepositorymessages.PutFileRequest@7a2b0101[correlationID=69c6f4bc-0929-4540-8fed-f147258f45a8, collectionID=TwoPillarCollection, destination=Pillar2_topic-cibuild01, replyTo=TEST-TOPIC-PutFileClientComponentTest-cibuild01, from=sameFileExistsOnOnePillar, to=<null>, version=28, minVersion=24, auditTrailInformation=TEST-AUDIT-TRAIL, pillarID=Pillar2, fileID=default-test-file.txt, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, fileSize=0, checksumDataForNewFile=org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@464fecb1[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@5a5d16c2[checksumType=MD5, checksumSalt=<null>, otherChecksumType=<null>], checksumValue={-108,10,81,-78,80,-25,-86,-126,-40,-24,-22,49,33,127,-14,103}, calculationTimestamp=2015-10-15T02:19:37.589+02:00], checksumRequestForNewFile=<null>]
Step: The client should proceed to send a putFileOperation request to the second pillar.
Step: Send a pillar complete event
Result: Received event: 69c6f4bc: PUT_FILE for file default-test-file.txt: COMPONENT_COMPLETE: ContributorID Pillar2, requestedChecksumResult=null
Result: Received event: 69c6f4bc: PUT_FILE for file default-test-file.txt: COMPLETE:
Test success: sameFileExistsOnOnePillar
Test starting: verifyPutClientFromFactory
Description: Testing the initialization through the ModifyComponentFactory.
Step: Use the ModifyComponentFactory to instantiate a PutFileClient.
Test success: verifyPutClientFromFactory
Starting testcase AuditTrailClientComponentTest
Test starting: getAllAuditTrailsTest
Description: Tests the simplest case of getting all audit trail event for all contributers.
Step: Create a AuditTrailClient.
Step: Retrieve all audit trails from the collection by calling with a null componentQueries array
Stimuli: Calling getAuditTrails(null, default-test-file.txt, null)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyContributorsForGetAuditTrailsRequest@67ba7db3[correlationID=8a0b6066-c25d-4793-bb68-c86353415696, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-AuditTrailClientUnderTest-cibuild01, from=getAllAuditTrailsTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>]
Result: Received event: 8a0b6066: GET_AUDIT_TRAILS for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying contributers for audit trails
Step: Send a identifyResponse from each pillar
Result: Received event: 8a0b6066: GET_AUDIT_TRAILS for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar1
Result: Received event: 8a0b6066: GET_AUDIT_TRAILS for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar2
Result: Received event: 8a0b6066: GET_AUDIT_TRAILS for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: [Pillar1, Pillar2]
Result: Received event: 8a0b6066: GET_AUDIT_TRAILS for file default-test-file.txt: REQUEST_SENT: ContributorID [Pillar1, Pillar2], Sending request for audit trails
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.GetAuditTrailsRequest@147ee877[correlationID=8a0b6066-c25d-4793-bb68-c86353415696, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-AuditTrailClientUnderTest-cibuild01, from=getAllAuditTrailsTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, contributor=Pillar1, fileID=default-test-file.txt, minSequenceNumber=<null>, maxSequenceNumber=<null>, minTimestamp=<null>, maxTimestamp=<null>, maxNumberOfResults=<null>, resultAddress=<null>]
Result: Received message on Pillar2_topic-cibuild01 : org.bitrepository.bitrepositorymessages.GetAuditTrailsRequest@1081906a[correlationID=8a0b6066-c25d-4793-bb68-c86353415696, collectionID=TwoPillarCollection, destination=Pillar2_topic-cibuild01, replyTo=TEST-TOPIC-AuditTrailClientUnderTest-cibuild01, from=getAllAuditTrailsTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, contributor=Pillar2, fileID=default-test-file.txt, minSequenceNumber=<null>, maxSequenceNumber=<null>, minTimestamp=<null>, maxTimestamp=<null>, maxNumberOfResults=<null>, resultAddress=<null>]
Step: Send a final response from pillar 1
Result: Received event: 8a0b6066: GET_AUDIT_TRAILS for file default-test-file.txt: COMPONENT_COMPLETE: ContributorID Pillar1, NumberOfAuditTrailEvents=2, PartialResult=false
Step: Send a final response from pillar 2
Result: Received event: 8a0b6066: GET_AUDIT_TRAILS for file default-test-file.txt: COMPONENT_COMPLETE: ContributorID Pillar2, NumberOfAuditTrailEvents=2, PartialResult=false
Result: Received event: 8a0b6066: GET_AUDIT_TRAILS for file default-test-file.txt: COMPLETE:
Test success: getAllAuditTrailsTest
Test starting: getSomeAuditTrailsTest
Description: Tests the client maps a AuditTrail query correctly to a GetAuditTrail request.
Step: Request audit trails from pillar 1 with both min and max sequence number set.
Stimuli: Calling getAuditTrails([AuditTrailQuery{componentID='Pillar1, minTimestamp=null, maxTimestamp=null, maxNumberOfResults=10000}minSequenceNumber=1, maxSequenceNumber=3}], null, null)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyContributorsForGetAuditTrailsRequest@6a6fc416[correlationID=8fc9875a-b1b8-4f5c-af79-08de2a4dbee3, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-AuditTrailClientUnderTest-cibuild01, from=getSomeAuditTrailsTest, to=Pillar1, version=28, minVersion=24, auditTrailInformation=<null>]
Result: Received event: 8fc9875a: GET_AUDIT_TRAILS: IDENTIFY_REQUEST_SENT: , Identifying contributers for audit trails
Step: Send a identifyResponse from pillar1
Result: Received event: 8fc9875a: GET_AUDIT_TRAILS: COMPONENT_IDENTIFIED: ContributorID Pillar1
Result: Received event: 8fc9875a: GET_AUDIT_TRAILS: IDENTIFICATION_COMPLETE: Contributors: [Pillar1]
Result: Received event: 8fc9875a: GET_AUDIT_TRAILS: REQUEST_SENT: ContributorID [Pillar1], Sending request for audit trails
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.GetAuditTrailsRequest@35c9e3b9[correlationID=8fc9875a-b1b8-4f5c-af79-08de2a4dbee3, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-AuditTrailClientUnderTest-cibuild01, from=getSomeAuditTrailsTest, to=Pillar1, version=28, minVersion=24, auditTrailInformation=<null>, contributor=Pillar1, fileID=<null>, minSequenceNumber=1, maxSequenceNumber=3, minTimestamp=<null>, maxTimestamp=<null>, maxNumberOfResults=10000, resultAddress=<null>]
Step: Verify no request is sent to pillar2
Step: Send a final response from pillar 1
Result: Received event: 8fc9875a: GET_AUDIT_TRAILS: COMPONENT_COMPLETE: ContributorID Pillar1, NumberOfAuditTrailEvents=2, PartialResult=false
Result: Received event: 8fc9875a: GET_AUDIT_TRAILS: COMPLETE:
Test success: getSomeAuditTrailsTest
Test starting: incompleteSetOfFinalResponsesTest
Description: Verify that the GetAuditTrail client works correct without receiving responses from all contributers.
Step: Configure 500 ms second timeout for the operation itself. The default 2 contributers collection is used
Stimuli: Calling getAuditTrails(null, null, null)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyContributorsForGetAuditTrailsRequest@1d1daaa3[correlationID=353e3ab8-8096-4321-a07c-054463f36486, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-AuditTrailClientUnderTest-cibuild01, from=incompleteSetOfFinalResponsesTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>]
Result: Received event: 353e3ab8: GET_AUDIT_TRAILS: IDENTIFY_REQUEST_SENT: , Identifying contributers for audit trails
Step: Send a identifyResponse from each of the two pillars
Result: Received event: 353e3ab8: GET_AUDIT_TRAILS: COMPONENT_IDENTIFIED: ContributorID Pillar1
Result: Received event: 353e3ab8: GET_AUDIT_TRAILS: COMPONENT_IDENTIFIED: ContributorID Pillar2
Result: Received event: 353e3ab8: GET_AUDIT_TRAILS: IDENTIFICATION_COMPLETE: Contributors: [Pillar1, Pillar2]
Result: Received event: 353e3ab8: GET_AUDIT_TRAILS: REQUEST_SENT: ContributorID [Pillar1, Pillar2], Sending request for audit trails
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.GetAuditTrailsRequest@155770e0[correlationID=353e3ab8-8096-4321-a07c-054463f36486, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-AuditTrailClientUnderTest-cibuild01, from=incompleteSetOfFinalResponsesTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, contributor=Pillar1, fileID=<null>, minSequenceNumber=<null>, maxSequenceNumber=<null>, minTimestamp=<null>, maxTimestamp=<null>, maxNumberOfResults=<null>, resultAddress=<null>]
Result: Received message on Pillar2_topic-cibuild01 : org.bitrepository.bitrepositorymessages.GetAuditTrailsRequest@656f985b[correlationID=353e3ab8-8096-4321-a07c-054463f36486, collectionID=TwoPillarCollection, destination=Pillar2_topic-cibuild01, replyTo=TEST-TOPIC-AuditTrailClientUnderTest-cibuild01, from=incompleteSetOfFinalResponsesTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, contributor=Pillar2, fileID=<null>, minSequenceNumber=<null>, maxSequenceNumber=<null>, minTimestamp=<null>, maxTimestamp=<null>, maxNumberOfResults=<null>, resultAddress=<null>]
Test success: incompleteSetOfFinalResponsesTest
Result: The following messages haven't been handled by the testcase:
org.bitrepository.bitrepositorymessages.GetAuditTrailsRequest@656f985b[correlationID=353e3ab8-8096-4321-a07c-054463f36486, collectionID=TwoPillarCollection, destination=Pillar2_topic-cibuild01, replyTo=TEST-TOPIC-AuditTrailClientUnderTest-cibuild01, from=incompleteSetOfFinalResponsesTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, contributor=Pillar2, fileID=<null>, minSequenceNumber=<null>, maxSequenceNumber=<null>, minTimestamp=<null>, maxTimestamp=<null>, maxNumberOfResults=<null>, resultAddress=<null>]
02:19:39.106 WARN o.b.protocol.bus.MessageReceiver - The following messages haven't been handled by the testcase:
org.bitrepository.bitrepositorymessages.GetAuditTrailsRequest@656f985b[correlationID=353e3ab8-8096-4321-a07c-054463f36486, collectionID=TwoPillarCollection, destination=Pillar2_topic-cibuild01, replyTo=TEST-TOPIC-AuditTrailClientUnderTest-cibuild01, from=incompleteSetOfFinalResponsesTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, contributor=Pillar2, fileID=<null>, minSequenceNumber=<null>, maxSequenceNumber=<null>, minTimestamp=<null>, maxTimestamp=<null>, maxNumberOfResults=<null>, resultAddress=<null>]
Test starting: negativeGetAuditTrailsResponseTest
Description: Verify that the GetAuditTrail client works correct when receiving a negative GetAuditTrails response from one contributers.
Step: Create a AuditTrailClient.
Step: Retrieve all audit trails from the collection by calling with a null componentQueries array
Stimuli: Calling getAuditTrails(null, null, null)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyContributorsForGetAuditTrailsRequest@6ef27af9[correlationID=dc9f25df-a9b6-4e09-82b4-4be436ade9a8, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-AuditTrailClientUnderTest-cibuild01, from=negativeGetAuditTrailsResponseTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>]
Result: Received event: dc9f25df: GET_AUDIT_TRAILS: IDENTIFY_REQUEST_SENT: , Identifying contributers for audit trails
Step: Send a identifyResponse from each of the two pillars
Result: Received event: dc9f25df: GET_AUDIT_TRAILS: COMPONENT_IDENTIFIED: ContributorID Pillar1
Result: Received event: dc9f25df: GET_AUDIT_TRAILS: COMPONENT_IDENTIFIED: ContributorID Pillar2
Result: Received event: dc9f25df: GET_AUDIT_TRAILS: IDENTIFICATION_COMPLETE: Contributors: [Pillar1, Pillar2]
Result: Received event: dc9f25df: GET_AUDIT_TRAILS: REQUEST_SENT: ContributorID [Pillar1, Pillar2], Sending request for audit trails
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.GetAuditTrailsRequest@2eeb14d4[correlationID=dc9f25df-a9b6-4e09-82b4-4be436ade9a8, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-AuditTrailClientUnderTest-cibuild01, from=negativeGetAuditTrailsResponseTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, contributor=Pillar1, fileID=<null>, minSequenceNumber=<null>, maxSequenceNumber=<null>, minTimestamp=<null>, maxTimestamp=<null>, maxNumberOfResults=<null>, resultAddress=<null>]
Result: Received message on Pillar2_topic-cibuild01 : org.bitrepository.bitrepositorymessages.GetAuditTrailsRequest@53339642[correlationID=dc9f25df-a9b6-4e09-82b4-4be436ade9a8, collectionID=TwoPillarCollection, destination=Pillar2_topic-cibuild01, replyTo=TEST-TOPIC-AuditTrailClientUnderTest-cibuild01, from=negativeGetAuditTrailsResponseTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, contributor=Pillar2, fileID=<null>, minSequenceNumber=<null>, maxSequenceNumber=<null>, minTimestamp=<null>, maxTimestamp=<null>, maxNumberOfResults=<null>, resultAddress=<null>]
Step: Send a failed response from pillar 1
Result: Received event: dc9f25df: GET_AUDIT_TRAILS: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: FAILURE, GetAuditTrails failed
Step: Send a final response from pillar 2
Result: Received event: dc9f25df: GET_AUDIT_TRAILS: COMPONENT_COMPLETE: ContributorID Pillar2, NumberOfAuditTrailEvents=2, PartialResult=false
Result: Received event: dc9f25df: GET_AUDIT_TRAILS: FAILED: , Failed operation. Cause(s):
[dc9f25df: GET_AUDIT_TRAILS: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: FAILURE, GetAuditTrails failed]
Test success: negativeGetAuditTrailsResponseTest
Test starting: noFinalResponsesTest
Description: Tests the the AuditTrailClient handles lack of Final Responses gracefully
Step: Set a 100 ms timeout for the operation.
Step: Make the client ask for all audit trails.
Stimuli: Calling getAuditTrails(null, null, null)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyContributorsForGetAuditTrailsRequest@58b4f4a[correlationID=9f009cfd-0226-4e0d-9971-8e0657c81ff7, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-AuditTrailClientUnderTest-cibuild01, from=noFinalResponsesTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>]
Result: Received event: 9f009cfd: GET_AUDIT_TRAILS: IDENTIFY_REQUEST_SENT: , Identifying contributers for audit trails
Step: Send a identifyResponse from each of the two pillars
Result: Received event: 9f009cfd: GET_AUDIT_TRAILS: COMPONENT_IDENTIFIED: ContributorID Pillar1
Result: Received event: 9f009cfd: GET_AUDIT_TRAILS: COMPONENT_IDENTIFIED: ContributorID Pillar2
Result: Received event: 9f009cfd: GET_AUDIT_TRAILS: IDENTIFICATION_COMPLETE: Contributors: [Pillar2, Pillar1]
Result: Received event: 9f009cfd: GET_AUDIT_TRAILS: REQUEST_SENT: ContributorID [Pillar1, Pillar2], Sending request for audit trails
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.GetAuditTrailsRequest@4325de9e[correlationID=9f009cfd-0226-4e0d-9971-8e0657c81ff7, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-AuditTrailClientUnderTest-cibuild01, from=noFinalResponsesTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, contributor=Pillar1, fileID=<null>, minSequenceNumber=<null>, maxSequenceNumber=<null>, minTimestamp=<null>, maxTimestamp=<null>, maxNumberOfResults=<null>, resultAddress=<null>]
Result: Received message on Pillar2_topic-cibuild01 : org.bitrepository.bitrepositorymessages.GetAuditTrailsRequest@1c0b38af[correlationID=9f009cfd-0226-4e0d-9971-8e0657c81ff7, collectionID=TwoPillarCollection, destination=Pillar2_topic-cibuild01, replyTo=TEST-TOPIC-AuditTrailClientUnderTest-cibuild01, from=noFinalResponsesTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, contributor=Pillar2, fileID=<null>, minSequenceNumber=<null>, maxSequenceNumber=<null>, minTimestamp=<null>, maxTimestamp=<null>, maxNumberOfResults=<null>, resultAddress=<null>]
Step: Wait for 1 second
Result: Received event: 353e3ab8: GET_AUDIT_TRAILS: FAILED: , Failed to receive responses from all contributors before timeout(500ms). Missing contributors [Pillar1, Pillar2]
Result: Received event: 9f009cfd: GET_AUDIT_TRAILS: FAILED: , Failed to receive responses from all contributors before timeout(100ms). Missing contributors [Pillar1, Pillar2]
Test success: noFinalResponsesTest
Result: The following messages haven't been handled by the testcase:
org.bitrepository.bitrepositorymessages.GetAuditTrailsRequest@4325de9e[correlationID=9f009cfd-0226-4e0d-9971-8e0657c81ff7, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-AuditTrailClientUnderTest-cibuild01, from=noFinalResponsesTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, contributor=Pillar1, fileID=<null>, minSequenceNumber=<null>, maxSequenceNumber=<null>, minTimestamp=<null>, maxTimestamp=<null>, maxNumberOfResults=<null>, resultAddress=<null>]
02:19:39.643 WARN o.b.protocol.bus.MessageReceiver - The following messages haven't been handled by the testcase:
org.bitrepository.bitrepositorymessages.GetAuditTrailsRequest@4325de9e[correlationID=9f009cfd-0226-4e0d-9971-8e0657c81ff7, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-AuditTrailClientUnderTest-cibuild01, from=noFinalResponsesTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, contributor=Pillar1, fileID=<null>, minSequenceNumber=<null>, maxSequenceNumber=<null>, minTimestamp=<null>, maxTimestamp=<null>, maxNumberOfResults=<null>, resultAddress=<null>]
Result: The following messages haven't been handled by the testcase:
org.bitrepository.bitrepositorymessages.GetAuditTrailsRequest@1c0b38af[correlationID=9f009cfd-0226-4e0d-9971-8e0657c81ff7, collectionID=TwoPillarCollection, destination=Pillar2_topic-cibuild01, replyTo=TEST-TOPIC-AuditTrailClientUnderTest-cibuild01, from=noFinalResponsesTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, contributor=Pillar2, fileID=<null>, minSequenceNumber=<null>, maxSequenceNumber=<null>, minTimestamp=<null>, maxTimestamp=<null>, maxNumberOfResults=<null>, resultAddress=<null>]
02:19:39.644 WARN o.b.protocol.bus.MessageReceiver - The following messages haven't been handled by the testcase:
org.bitrepository.bitrepositorymessages.GetAuditTrailsRequest@1c0b38af[correlationID=9f009cfd-0226-4e0d-9971-8e0657c81ff7, collectionID=TwoPillarCollection, destination=Pillar2_topic-cibuild01, replyTo=TEST-TOPIC-AuditTrailClientUnderTest-cibuild01, from=noFinalResponsesTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, contributor=Pillar2, fileID=<null>, minSequenceNumber=<null>, maxSequenceNumber=<null>, minTimestamp=<null>, maxTimestamp=<null>, maxNumberOfResults=<null>, resultAddress=<null>]
Test starting: progressEventsTest
Description: Tests that progress events are handled correctly.
Step: Create a AuditTrailClient.
Step: Retrieve all audit trails from the collection by calling with a null componentQueries array
Stimuli: Calling getAuditTrails(null, null, null)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyContributorsForGetAuditTrailsRequest@28e04625[correlationID=122163c5-8c69-4b6e-a31b-3f28e8197790, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-AuditTrailClientUnderTest-cibuild01, from=progressEventsTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>]
Result: Received event: 122163c5: GET_AUDIT_TRAILS: IDENTIFY_REQUEST_SENT: , Identifying contributers for audit trails
Step: Send a identifyResponse from each of the two pillars
Result: Received event: 122163c5: GET_AUDIT_TRAILS: COMPONENT_IDENTIFIED: ContributorID Pillar1
Result: Received event: 122163c5: GET_AUDIT_TRAILS: COMPONENT_IDENTIFIED: ContributorID Pillar2
Result: Received event: 122163c5: GET_AUDIT_TRAILS: IDENTIFICATION_COMPLETE: Contributors: [Pillar2, Pillar1]
Result: Received event: 122163c5: GET_AUDIT_TRAILS: REQUEST_SENT: ContributorID [Pillar1, Pillar2], Sending request for audit trails
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.GetAuditTrailsRequest@8bbd0c7[correlationID=122163c5-8c69-4b6e-a31b-3f28e8197790, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-AuditTrailClientUnderTest-cibuild01, from=progressEventsTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, contributor=Pillar1, fileID=<null>, minSequenceNumber=<null>, maxSequenceNumber=<null>, minTimestamp=<null>, maxTimestamp=<null>, maxNumberOfResults=<null>, resultAddress=<null>]
Result: Received message on Pillar2_topic-cibuild01 : org.bitrepository.bitrepositorymessages.GetAuditTrailsRequest@22406e9b[correlationID=122163c5-8c69-4b6e-a31b-3f28e8197790, collectionID=TwoPillarCollection, destination=Pillar2_topic-cibuild01, replyTo=TEST-TOPIC-AuditTrailClientUnderTest-cibuild01, from=progressEventsTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, contributor=Pillar2, fileID=<null>, minSequenceNumber=<null>, maxSequenceNumber=<null>, minTimestamp=<null>, maxTimestamp=<null>, maxNumberOfResults=<null>, resultAddress=<null>]
Step: Send a progress accepted response from pillar 1
Result: Received event: 122163c5: GET_AUDIT_TRAILS: PROGRESS: ContributorID Pillar1, GetAuditTrails request accepted
Step: Send a general progress response from pillar 2
Result: Received event: 122163c5: GET_AUDIT_TRAILS: PROGRESS: ContributorID Pillar2, Still progressing
Test success: progressEventsTest
Test starting: verifyAuditTrailClientFromFactory
Test success: verifyAuditTrailClientFromFactory
Test starting: collectionIDIncludedInEventsTest
Description: Tests the the client provides collectionID in events.
Step: Set a 0.5 second operation timeout.
Step: Start the operation
Stimuli: Calling getAuditTrails(null, null, null)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyContributorsForGetAuditTrailsRequest@41758fc9[correlationID=d9b41ff7-4c4d-43d4-9521-09963f443852, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-AuditTrailClientUnderTest-cibuild01, from=collectionIDIncludedInEventsTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>]
Result: Received event: d9b41ff7: GET_AUDIT_TRAILS: IDENTIFY_REQUEST_SENT: , Identifying contributers for audit trails
Step: Send positive responses from the pillar1 and a negative response from pillar2
Result: Received event: d9b41ff7: GET_AUDIT_TRAILS: COMPONENT_IDENTIFIED: ContributorID Pillar1
Result: Received event: d9b41ff7: GET_AUDIT_TRAILS: COMPONENT_FAILED: ContributorID Pillar2 ResponseCode: IDENTIFICATION_NEGATIVE
Result: Received event: d9b41ff7: GET_AUDIT_TRAILS: IDENTIFICATION_COMPLETE: Contributors: [Pillar1]
Result: Received event: d9b41ff7: GET_AUDIT_TRAILS: REQUEST_SENT: ContributorID [Pillar1], Sending request for audit trails
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.GetAuditTrailsRequest@1e2b7fa5[correlationID=d9b41ff7-4c4d-43d4-9521-09963f443852, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-AuditTrailClientUnderTest-cibuild01, from=collectionIDIncludedInEventsTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, contributor=Pillar1, fileID=<null>, minSequenceNumber=<null>, maxSequenceNumber=<null>, minTimestamp=<null>, maxTimestamp=<null>, maxNumberOfResults=<null>, resultAddress=<null>]
Step: Wait for 1 second
Result: Received event: d9b41ff7: GET_AUDIT_TRAILS: FAILED: , Failed to receive responses from all contributors before timeout(500ms). Missing contributors [Pillar1]
Test success: collectionIDIncludedInEventsTest
Test starting: conversationTimeoutTest
Description: Tests the the client handles lack of IdentifyPillarResponses gracefully
Step: Set a 100 ms ConversationTimeout.
Step: Start the operation
Stimuli: Calling getAuditTrails(null, null, null)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyContributorsForGetAuditTrailsRequest@3265e21a[correlationID=4d18fa21-5532-437a-9fa9-4459ac867989, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-AuditTrailClientUnderTest-cibuild01, from=conversationTimeoutTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>]
Result: Received event: 4d18fa21: GET_AUDIT_TRAILS: IDENTIFY_REQUEST_SENT: , Identifying contributers for audit trails
02:19:41.540 WARN o.b.c.c.m.CollectionBasedConversationMediator - Failing timed out conversation 4d18fa21-5532-437a-9fa9-4459ac867989 (Age 1018ms)
Result: Received event: 4d18fa21: GET_AUDIT_TRAILS: FAILED: , Failing timed out conversation 4d18fa21-5532-437a-9fa9-4459ac867989
Test success: conversationTimeoutTest
Test starting: identificationFailureTest
Description: Verify that the client works correctly when a contributor sends a failure response.
Step: Start the operation.
Stimuli: Calling getAuditTrails(null, null, null)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyContributorsForGetAuditTrailsRequest@50ed196f[correlationID=1fdf6501-4e96-4be1-9387-51e602b50939, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-AuditTrailClientUnderTest-cibuild01, from=identificationFailureTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>]
Result: Received event: 1fdf6501: GET_AUDIT_TRAILS: IDENTIFY_REQUEST_SENT: , Identifying contributers for audit trails
Step: Send a identification response from contributor1 with a FAILURE response code.
Result: Received event: 1fdf6501: GET_AUDIT_TRAILS: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: FAILURE
Step: Send a identification response from contributor2 with a IDENTIFICATION_POSITIVE response code .
Result: Received event: 1fdf6501: GET_AUDIT_TRAILS: COMPONENT_IDENTIFIED: ContributorID Pillar2
Result: Received event: 1fdf6501: GET_AUDIT_TRAILS: IDENTIFICATION_COMPLETE: Contributors: [Pillar2]
Result: Received event: 1fdf6501: GET_AUDIT_TRAILS: REQUEST_SENT: ContributorID [Pillar2], Sending request for audit trails
Result: Received message on Pillar2_topic-cibuild01 : org.bitrepository.bitrepositorymessages.GetAuditTrailsRequest@45330a89[correlationID=1fdf6501-4e96-4be1-9387-51e602b50939, collectionID=TwoPillarCollection, destination=Pillar2_topic-cibuild01, replyTo=TEST-TOPIC-AuditTrailClientUnderTest-cibuild01, from=identificationFailureTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, contributor=Pillar2, fileID=<null>, minSequenceNumber=<null>, maxSequenceNumber=<null>, minTimestamp=<null>, maxTimestamp=<null>, maxNumberOfResults=<null>, resultAddress=<null>]
Step: Verify that the client continues to the performing phase.
Step: Send a final response message from contributor2
Result: Received event: 1fdf6501: GET_AUDIT_TRAILS: COMPONENT_COMPLETE: ContributorID Pillar2, PartialResult=false
Result: Received event: 1fdf6501: GET_AUDIT_TRAILS: FAILED: , Failed operation. Cause(s):
[1fdf6501: GET_AUDIT_TRAILS: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: FAILURE]
Test success: identificationFailureTest
Test starting: identificationNegativeTest
Description: Verify that the client works correctly when a contributor sends a negative response.
Step: Start the operation.
Stimuli: Calling getAuditTrails(null, null, null)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyContributorsForGetAuditTrailsRequest@131fa25c[correlationID=0ee04405-26bc-4202-a44e-471ab1e24a39, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-AuditTrailClientUnderTest-cibuild01, from=identificationNegativeTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>]
Result: Received event: 0ee04405: GET_AUDIT_TRAILS: IDENTIFY_REQUEST_SENT: , Identifying contributers for audit trails
Step: Send a identification response from contributor1 with a IDENTIFICATION_NEGATIVE response code .
Result: Received event: 0ee04405: GET_AUDIT_TRAILS: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: IDENTIFICATION_NEGATIVE
Step: Send a identification response from contributor2 with a IDENTIFICATION_POSITIVE response code .
Result: Received event: 0ee04405: GET_AUDIT_TRAILS: COMPONENT_IDENTIFIED: ContributorID Pillar2
Result: Received event: 0ee04405: GET_AUDIT_TRAILS: IDENTIFICATION_COMPLETE: Contributors: [Pillar2]
Result: Received event: 0ee04405: GET_AUDIT_TRAILS: REQUEST_SENT: ContributorID [Pillar2], Sending request for audit trails
Result: Received message on Pillar2_topic-cibuild01 : org.bitrepository.bitrepositorymessages.GetAuditTrailsRequest@724e9296[correlationID=0ee04405-26bc-4202-a44e-471ab1e24a39, collectionID=TwoPillarCollection, destination=Pillar2_topic-cibuild01, replyTo=TEST-TOPIC-AuditTrailClientUnderTest-cibuild01, from=identificationNegativeTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, contributor=Pillar2, fileID=<null>, minSequenceNumber=<null>, maxSequenceNumber=<null>, minTimestamp=<null>, maxTimestamp=<null>, maxNumberOfResults=<null>, resultAddress=<null>]
Step: Verify that the client continues to the performing phase.
Step: Send a final response message from contributor2
Result: Received event: 0ee04405: GET_AUDIT_TRAILS: COMPONENT_COMPLETE: ContributorID Pillar2, PartialResult=false
Result: Received event: 0ee04405: GET_AUDIT_TRAILS: FAILED: , Failed operation. Cause(s):
[0ee04405: GET_AUDIT_TRAILS: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: IDENTIFICATION_NEGATIVE]
Test success: identificationNegativeTest
Test starting: noContributorsRespondingTest
Description: Tests the the client handles lack of a IdentifyResponse gracefully. More concrete this means that the occurrence of a identification timeout should be handled correctly
Step: Set a 100 ms timeout for identifying contributors.
Step: Start the operation.
Stimuli: Calling getAuditTrails(null, null, null)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyContributorsForGetAuditTrailsRequest@403acbdb[correlationID=fdd30908-2c50-4114-ae97-fbdf56b08efc, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-AuditTrailClientUnderTest-cibuild01, from=noContributorsRespondingTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>]
Result: Received event: fdd30908: GET_AUDIT_TRAILS: IDENTIFY_REQUEST_SENT: , Identifying contributers for audit trails
Step: Wait for 1 second
Result: Received event: fdd30908: GET_AUDIT_TRAILS: IDENTIFY_TIMEOUT: , Time has run out for looking up contributors
The following contributors didn't respond: [Pillar1, Pillar2]
Result: Received event: fdd30908: GET_AUDIT_TRAILS: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: null, Timeout for identifying contributor
Result: Received event: fdd30908: GET_AUDIT_TRAILS: COMPONENT_FAILED: ContributorID Pillar2 ResponseCode: null, Timeout for identifying contributor
Result: Received event: fdd30908: GET_AUDIT_TRAILS: FAILED: , Unable to continue operation, contributors unavailable.
Test success: noContributorsRespondingTest
Result: The following messages haven't been handled by the testcase:
org.bitrepository.bitrepositorymessages.IdentifyContributorsForGetAuditTrailsRequest@403acbdb[correlationID=fdd30908-2c50-4114-ae97-fbdf56b08efc, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-AuditTrailClientUnderTest-cibuild01, from=noContributorsRespondingTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>]
02:19:44.368 WARN o.b.protocol.bus.MessageReceiver - The following messages haven't been handled by the testcase:
org.bitrepository.bitrepositorymessages.IdentifyContributorsForGetAuditTrailsRequest@403acbdb[correlationID=fdd30908-2c50-4114-ae97-fbdf56b08efc, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-AuditTrailClientUnderTest-cibuild01, from=noContributorsRespondingTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>]
Test starting: oneContributorNotRespondingTest
Description: Verify that the client works correct without receiving identification responses from all contributors.
Added fixture: Set the a identification timeout to 100 ms.
Step: Start the operation.
Stimuli: Calling getAuditTrails(null, null, null)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyContributorsForGetAuditTrailsRequest@7c99e5dd[correlationID=7cdb224e-0718-45a5-8345-d878774ed1a8, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-AuditTrailClientUnderTest-cibuild01, from=oneContributorNotRespondingTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>]
Result: Received event: 7cdb224e: GET_AUDIT_TRAILS: IDENTIFY_REQUEST_SENT: , Identifying contributers for audit trails
Step: Send a identification response from contributor1.
Result: Received event: 7cdb224e: GET_AUDIT_TRAILS: COMPONENT_IDENTIFIED: ContributorID Pillar1
Step: Wait 1 second.
Result: Received event: 7cdb224e: GET_AUDIT_TRAILS: IDENTIFY_TIMEOUT: , Time has run out for looking up contributors
The following contributors didn't respond: [Pillar2]
Result: Received event: 7cdb224e: GET_AUDIT_TRAILS: COMPONENT_FAILED: ContributorID Pillar2 ResponseCode: null, Timeout for identifying contributor
Result: Received event: 7cdb224e: GET_AUDIT_TRAILS: IDENTIFICATION_COMPLETE: Contributors: [Pillar1]
Result: Received event: 7cdb224e: GET_AUDIT_TRAILS: REQUEST_SENT: ContributorID [Pillar1], Sending request for audit trails
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.GetAuditTrailsRequest@24232fcc[correlationID=7cdb224e-0718-45a5-8345-d878774ed1a8, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-AuditTrailClientUnderTest-cibuild01, from=oneContributorNotRespondingTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, contributor=Pillar1, fileID=<null>, minSequenceNumber=<null>, maxSequenceNumber=<null>, minTimestamp=<null>, maxTimestamp=<null>, maxNumberOfResults=<null>, resultAddress=<null>]
Step: Verify that the client continues to the performing phase.
Step: Send a final response upload message
Result: Received event: 7cdb224e: GET_AUDIT_TRAILS: COMPONENT_COMPLETE: ContributorID Pillar1, PartialResult=false
Result: Received event: 7cdb224e: GET_AUDIT_TRAILS: FAILED: , Failed operation. Cause(s):
[7cdb224e: GET_AUDIT_TRAILS: COMPONENT_FAILED: ContributorID Pillar2 ResponseCode: null, Timeout for identifying contributor]
Test success: oneContributorNotRespondingTest
Test starting: operationTimeoutTest
Description: Tests the the client handles lack of final responses gracefully.
Step: Set a 100 ms operation timeout.
Step: Start the operation
Stimuli: Calling getAuditTrails(null, null, null)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyContributorsForGetAuditTrailsRequest@2e643cad[correlationID=e2a6b48d-654a-4f27-ac16-c28d7ceba3a4, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-AuditTrailClientUnderTest-cibuild01, from=operationTimeoutTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>]
Result: Received event: e2a6b48d: GET_AUDIT_TRAILS: IDENTIFY_REQUEST_SENT: , Identifying contributers for audit trails
Step: Send positive responses from the pillar1 and a negative response from pillar2
Result: Received event: e2a6b48d: GET_AUDIT_TRAILS: COMPONENT_IDENTIFIED: ContributorID Pillar1
Result: Received event: e2a6b48d: GET_AUDIT_TRAILS: COMPONENT_FAILED: ContributorID Pillar2 ResponseCode: IDENTIFICATION_NEGATIVE
Result: Received event: e2a6b48d: GET_AUDIT_TRAILS: IDENTIFICATION_COMPLETE: Contributors: [Pillar1]
Result: Received event: e2a6b48d: GET_AUDIT_TRAILS: REQUEST_SENT: ContributorID [Pillar1], Sending request for audit trails
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.GetAuditTrailsRequest@21c64b8e[correlationID=e2a6b48d-654a-4f27-ac16-c28d7ceba3a4, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-AuditTrailClientUnderTest-cibuild01, from=operationTimeoutTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, contributor=Pillar1, fileID=<null>, minSequenceNumber=<null>, maxSequenceNumber=<null>, minTimestamp=<null>, maxTimestamp=<null>, maxNumberOfResults=<null>, resultAddress=<null>]
Step: Wait for 1 second
Result: Received event: e2a6b48d: GET_AUDIT_TRAILS: FAILED: , Failed to receive responses from all contributors before timeout(100ms). Missing contributors [Pillar1]
Test success: operationTimeoutTest
Starting testcase PutFileCmdTest
Test starting: checksumArgumentNonSaltAlgorithmWitoutSaltTest
Description: Test MD5 checksum without salt -> no failure
Test success: checksumArgumentNonSaltAlgorithmWitoutSaltTest
Test starting: checksumArgumentSaltAlgorithmWithSaltTest
Description: Test HMAC_SHA256 checksum with salt -> No failure
Test success: checksumArgumentSaltAlgorithmWithSaltTest
Test starting: defaultSuccessScenarioTest
Description: Tests simplest arguments for running the CmdLineClient
Test success: defaultSuccessScenarioTest
Test starting: missingChecksumWhenFileArgumentTest
Description: Tests the scenario, where no checksum argument is given, but a file is given.
Test success: missingChecksumWhenFileArgumentTest
Test starting: missingChecksumWhenURLArgumentTest
Description: Tests the scenario, where no checksum argument is given, but a URL is given.
Invalid argument: The URL argument requires also the checksum argument (-c).
Test success: missingChecksumWhenURLArgumentTest
Test starting: missingCollectionArgumentTest
Description: Tests the scenario, where the collection arguments is missing.
Takes the following arguments:
-p [OPTIONAL] The id of the pillar where the should be performed. If undefined the operations is performed on all pillars.
-R [OPTIONAL] The algorithm of checksum to request in the response from the pillars.
-s The path to the directory with the settings files for the client
-c The id for the collection to perform the operation on.
-C The checksum for the file to be retreived. Required if using an URL.
-S [OPTIONAL] The salt of checksum to request in the response. Requires the ChecksumType argument.
-d If this argument is present, then the file will be removed from the server, when the operation is complete.
-u The URL for the file to be put. Is required, unless the actual file is given.
-v Makes the client more verbose
-f The path to the file, which is wanted to be put. Is required, unless a URL is given.
-i The id for the file to perform the operation on.
-k The path to the file containing the private key.
Missing argument: c
Test success: missingCollectionArgumentTest
Test starting: missingFileIDWhenFileArgumentTest
Description: Tests the scenario, where no checksum argument is given, but a URL is given.
Test success: missingFileIDWhenFileArgumentTest
Test starting: missingFileIDWhenURLArgumentTest
Description: Tests the scenario, where no checksum argument is given, but a URL is given.
Invalid argument: The URL argument requires also the argument for the ID of the file (-i).
Test success: missingFileIDWhenURLArgumentTest
Test starting: missingFileOrURLArgumentTest
Description: Tests the scenario, where no arguments for file or url is given.
Invalid argument: Requires either the file argument (-f) or the URL argument (-u).
Test success: missingFileOrURLArgumentTest
Test starting: specificPillarArgumentTest
Description: Test argument for a specific pillar
Test success: specificPillarArgumentTest
Test starting: unknownPillarArgumentTest
Description: Testing against a non-existing pillar id -> Should fail
Invalid argument: Random1444868387255pillar is not a valid pillar for collection TwoPillarCollection
The collection contains the following pillars: [Pillar1, Pillar2]
Test success: unknownPillarArgumentTest
Test starting: urlSuccessScenarioTest
Description: Tests arguments for putting a file on a given URL
Test success: urlSuccessScenarioTest
Starting testcase AuditTrailQueryTest
Test starting: testBothSequenceNumberFailure
Description: Test the creation of a AuditTrailQuery with both SequenceNumber, where max is smalle than min.
Test success: testBothSequenceNumberFailure
Test starting: testBothSequenceNumberSuccess
Description: Test the creation of a AuditTrailQuery with both SequenceNumber, where max is larger than min.
Test success: testBothSequenceNumberSuccess
Test starting: testNoSequenceNumbers
Description: Test that a AuditTrailQuery can be created without any sequence numbers.
Test success: testNoSequenceNumbers
Test starting: testOnlyMinSequenceNumber
Description: Test the creation of a AuditTrailQuery with only the minSequenceNumber
Test success: testOnlyMinSequenceNumber
Starting testcase DeleteFileCmdTest
Test starting: checksumArgumentNonSaltAlgorithmWitoutSaltTest
Description: Test MD5 checksum without salt -> no failure
Test success: checksumArgumentNonSaltAlgorithmWitoutSaltTest
Test starting: checksumArgumentSaltAlgorithmWithSaltTest
Description: Test HMAC_SHA256 checksum with salt -> No failure
Test success: checksumArgumentSaltAlgorithmWithSaltTest
Test starting: defaultSuccessScenarioTest
Description: Tests simplest arguments for running the CmdLineClient
Test success: defaultSuccessScenarioTest
Test starting: missingCollectionArgumentTest
Description: Tests the scenario, where the collection arguments is missing.
Takes the following arguments:
-p [OPTIONAL] The id of the pillar where the should be performed. If undefined the operations is performed on all pillars.
-R [OPTIONAL] The algorithm of checksum to request in the response from the pillars.
-s The path to the directory with the settings files for the client
-c The id for the collection to perform the operation on.
-C [OPTIONAL] The checksum of the file to be delete.
-S [OPTIONAL] The salt of checksum to request in the response. Requires the ChecksumType argument.
-v Makes the client more verbose
-i The id for the file to perform the operation on.
-k The path to the file containing the private key.
Missing argument: c
Test success: missingCollectionArgumentTest
Test starting: missingFileIDArgumentTest
Description: Tests the scenario, where no arguments for file id argument is given.
Takes the following arguments:
-p [OPTIONAL] The id of the pillar where the should be performed. If undefined the operations is performed on all pillars.
-R [OPTIONAL] The algorithm of checksum to request in the response from the pillars.
-s The path to the directory with the settings files for the client
-c The id for the collection to perform the operation on.
-C [OPTIONAL] The checksum of the file to be delete.
-S [OPTIONAL] The salt of checksum to request in the response. Requires the ChecksumType argument.
-v Makes the client more verbose
-i The id for the file to perform the operation on.
-k The path to the file containing the private key.
Missing argument: i
Test success: missingFileIDArgumentTest
Test starting: missingPillarArgumentTest
Description: Tests the different scenarios, with the pillar argument.
Invalid argument: The pillar argument -p must defined for the delete operation, only single pillar deletes are allowed
Test success: missingPillarArgumentTest
Test starting: unknownPillarArgumentTest
Step: Testing against a non-existing pillar id
Invalid argument: Random1444868388820pillar is not a valid pillar for collection TwoPillarCollection
The collection contains the following pillars: [Pillar1, Pillar2]
Test success: unknownPillarArgumentTest
Starting testcase GetChecksumsClientComponentTest
Test starting: collectionIDIncludedInEventsTest
Description: Tests the the client provides collectionID in events.
Step: Set a 0.5 second operation timeout.
Step: Start the operation
Stimuli: Calling getChecksums(null, null, null, null, org.bitrepository.client.TestEventHandler@68661b94, null)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForGetChecksumsRequest@7b1a2d0a[correlationID=9bb9548f-be1a-4429-92bb-b3b74eede990, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-GetChecksumsClientComponentTest-cibuild01, from=collectionIDIncludedInEventsTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@510fb2d8[fileID=<null>, allFileIDs=true], checksumRequestForExistingFile=<null>]
Result: Received event: 9bb9548f: GET_CHECKSUMS: IDENTIFY_REQUEST_SENT: , Identifying pillars for GetChecksums
Step: Send positive responses from the pillar1 and a negative response from pillar2
Result: Received event: 9bb9548f: GET_CHECKSUMS: COMPONENT_IDENTIFIED: ContributorID Pillar1
Result: Received event: 9bb9548f: GET_CHECKSUMS: COMPONENT_FAILED: ContributorID Pillar2 ResponseCode: IDENTIFICATION_NEGATIVE
Result: Received event: 9bb9548f: GET_CHECKSUMS: IDENTIFICATION_COMPLETE: Contributors: [Pillar1]
Result: Received event: 9bb9548f: GET_CHECKSUMS: REQUEST_SENT: ContributorID [Pillar1], Sending GetFileIDsRequest's
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.GetChecksumsRequest@31288ffc[correlationID=9bb9548f-be1a-4429-92bb-b3b74eede990, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-GetChecksumsClientComponentTest-cibuild01, from=collectionIDIncludedInEventsTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, pillarID=Pillar1, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@1d9d6273[fileID=<null>, allFileIDs=true], minTimestamp=<null>, maxTimestamp=<null>, maxNumberOfResults=<null>, checksumRequestForExistingFile=<null>, resultAddress=<null>]
Step: Wait for 1 second
Result: Received event: 9bb9548f: GET_CHECKSUMS: FAILED: , Failed to receive responses from all contributors before timeout(500ms). Missing contributors [Pillar1]
Test success: collectionIDIncludedInEventsTest
Test starting: conversationTimeoutTest
Description: Tests the the client handles lack of IdentifyPillarResponses gracefully
Step: Set a 100 ms ConversationTimeout.
Step: Start the operation
Stimuli: Calling getChecksums(null, null, null, null, org.bitrepository.client.TestEventHandler@68661b94, null)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForGetChecksumsRequest@65162814[correlationID=35ded163-b69e-47e9-8c66-0fa60aa98694, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-GetChecksumsClientComponentTest-cibuild01, from=conversationTimeoutTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@ba0b690[fileID=<null>, allFileIDs=true], checksumRequestForExistingFile=<null>]
Result: Received event: 35ded163: GET_CHECKSUMS: IDENTIFY_REQUEST_SENT: , Identifying pillars for GetChecksums
02:19:50.737 WARN o.b.c.c.m.CollectionBasedConversationMediator - Failing timed out conversation 35ded163-b69e-47e9-8c66-0fa60aa98694 (Age 1014ms)
Result: Received event: 35ded163: GET_CHECKSUMS: FAILED: , Failing timed out conversation 35ded163-b69e-47e9-8c66-0fa60aa98694
Test success: conversationTimeoutTest
Test starting: identificationFailureTest
Description: Verify that the client works correctly when a contributor sends a failure response.
Step: Start the operation.
Stimuli: Calling getChecksums(null, null, null, null, org.bitrepository.client.TestEventHandler@68661b94, null)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForGetChecksumsRequest@14c428e9[correlationID=447174a2-eaba-4b49-8d05-ab39f1bac85e, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-GetChecksumsClientComponentTest-cibuild01, from=identificationFailureTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@2be51f04[fileID=<null>, allFileIDs=true], checksumRequestForExistingFile=<null>]
Result: Received event: 447174a2: GET_CHECKSUMS: IDENTIFY_REQUEST_SENT: , Identifying pillars for GetChecksums
Step: Send a identification response from contributor1 with a FAILURE response code.
Result: Received event: 447174a2: GET_CHECKSUMS: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: FAILURE
Step: Send a identification response from contributor2 with a IDENTIFICATION_POSITIVE response code .
Result: Received event: 447174a2: GET_CHECKSUMS: COMPONENT_IDENTIFIED: ContributorID Pillar2
Result: Received event: 447174a2: GET_CHECKSUMS: IDENTIFICATION_COMPLETE: Contributors: [Pillar2]
Result: Received event: 447174a2: GET_CHECKSUMS: REQUEST_SENT: ContributorID [Pillar2], Sending GetFileIDsRequest's
Result: Received message on Pillar2_topic-cibuild01 : org.bitrepository.bitrepositorymessages.GetChecksumsRequest@37f3e60c[correlationID=447174a2-eaba-4b49-8d05-ab39f1bac85e, collectionID=TwoPillarCollection, destination=Pillar2_topic-cibuild01, replyTo=TEST-TOPIC-GetChecksumsClientComponentTest-cibuild01, from=identificationFailureTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, pillarID=Pillar2, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@2c5037b[fileID=<null>, allFileIDs=true], minTimestamp=<null>, maxTimestamp=<null>, maxNumberOfResults=<null>, checksumRequestForExistingFile=<null>, resultAddress=<null>]
Step: Verify that the client continues to the performing phase.
Step: Send a final response message from contributor2
Result: Received event: 447174a2: GET_CHECKSUMS: COMPONENT_COMPLETE: ContributorID Pillar2, PartialResult=false
Result: Received event: 447174a2: GET_CHECKSUMS: FAILED: , Failed operation. Cause(s):
[447174a2: GET_CHECKSUMS: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: FAILURE]
Test success: identificationFailureTest
Test starting: identificationNegativeTest
Description: Verify that the client works correctly when a contributor sends a negative response.
Step: Start the operation.
Stimuli: Calling getChecksums(null, null, null, null, org.bitrepository.client.TestEventHandler@68661b94, null)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForGetChecksumsRequest@4fe01994[correlationID=02d1b897-e898-4fe3-ae4f-7f7498404a30, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-GetChecksumsClientComponentTest-cibuild01, from=identificationNegativeTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@c77bcb0[fileID=<null>, allFileIDs=true], checksumRequestForExistingFile=<null>]
Result: Received event: 02d1b897: GET_CHECKSUMS: IDENTIFY_REQUEST_SENT: , Identifying pillars for GetChecksums
Step: Send a identification response from contributor1 with a IDENTIFICATION_NEGATIVE response code .
Result: Received event: 02d1b897: GET_CHECKSUMS: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: IDENTIFICATION_NEGATIVE
Step: Send a identification response from contributor2 with a IDENTIFICATION_POSITIVE response code .
Result: Received event: 02d1b897: GET_CHECKSUMS: COMPONENT_IDENTIFIED: ContributorID Pillar2
Result: Received event: 02d1b897: GET_CHECKSUMS: IDENTIFICATION_COMPLETE: Contributors: [Pillar2]
Result: Received event: 02d1b897: GET_CHECKSUMS: REQUEST_SENT: ContributorID [Pillar2], Sending GetFileIDsRequest's
Result: Received message on Pillar2_topic-cibuild01 : org.bitrepository.bitrepositorymessages.GetChecksumsRequest@5eb82ec9[correlationID=02d1b897-e898-4fe3-ae4f-7f7498404a30, collectionID=TwoPillarCollection, destination=Pillar2_topic-cibuild01, replyTo=TEST-TOPIC-GetChecksumsClientComponentTest-cibuild01, from=identificationNegativeTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, pillarID=Pillar2, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@115bb033[fileID=<null>, allFileIDs=true], minTimestamp=<null>, maxTimestamp=<null>, maxNumberOfResults=<null>, checksumRequestForExistingFile=<null>, resultAddress=<null>]
Step: Verify that the client continues to the performing phase.
Step: Send a final response message from contributor2
Result: Received event: 02d1b897: GET_CHECKSUMS: COMPONENT_COMPLETE: ContributorID Pillar2, PartialResult=false
Result: Received event: 02d1b897: GET_CHECKSUMS: FAILED: , Failed operation. Cause(s):
[02d1b897: GET_CHECKSUMS: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: IDENTIFICATION_NEGATIVE]
Test success: identificationNegativeTest
Test starting: noContributorsRespondingTest
Description: Tests the the client handles lack of a IdentifyResponse gracefully. More concrete this means that the occurrence of a identification timeout should be handled correctly
Step: Set a 100 ms timeout for identifying contributors.
Step: Start the operation.
Stimuli: Calling getChecksums(null, null, null, null, org.bitrepository.client.TestEventHandler@68661b94, null)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForGetChecksumsRequest@1127ec2d[correlationID=07e5d18a-a9b8-438e-9f26-b03f9455a732, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-GetChecksumsClientComponentTest-cibuild01, from=noContributorsRespondingTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@61fee0d7[fileID=<null>, allFileIDs=true], checksumRequestForExistingFile=<null>]
Result: Received event: 07e5d18a: GET_CHECKSUMS: IDENTIFY_REQUEST_SENT: , Identifying pillars for GetChecksums
Step: Wait for 1 second
Result: Received event: 07e5d18a: GET_CHECKSUMS: IDENTIFY_TIMEOUT: , Time has run out for looking up contributors
The following contributors didn't respond: [Pillar1, Pillar2]
Result: Received event: 07e5d18a: GET_CHECKSUMS: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: null, Timeout for identifying contributor
Result: Received event: 07e5d18a: GET_CHECKSUMS: COMPONENT_FAILED: ContributorID Pillar2 ResponseCode: null, Timeout for identifying contributor
Result: Received event: 07e5d18a: GET_CHECKSUMS: FAILED: , Unable to continue operation, contributors unavailable.
Test success: noContributorsRespondingTest
Result: The following messages haven't been handled by the testcase:
org.bitrepository.bitrepositorymessages.IdentifyPillarsForGetChecksumsRequest@1127ec2d[correlationID=07e5d18a-a9b8-438e-9f26-b03f9455a732, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-GetChecksumsClientComponentTest-cibuild01, from=noContributorsRespondingTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@61fee0d7[fileID=<null>, allFileIDs=true], checksumRequestForExistingFile=<null>]
02:19:53.818 WARN o.b.protocol.bus.MessageReceiver - The following messages haven't been handled by the testcase:
org.bitrepository.bitrepositorymessages.IdentifyPillarsForGetChecksumsRequest@1127ec2d[correlationID=07e5d18a-a9b8-438e-9f26-b03f9455a732, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-GetChecksumsClientComponentTest-cibuild01, from=noContributorsRespondingTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@61fee0d7[fileID=<null>, allFileIDs=true], checksumRequestForExistingFile=<null>]
Test starting: oneContributorNotRespondingTest
Description: Verify that the client works correct without receiving identification responses from all contributors.
Added fixture: Set the a identification timeout to 100 ms.
Step: Start the operation.
Stimuli: Calling getChecksums(null, null, null, null, org.bitrepository.client.TestEventHandler@68661b94, null)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForGetChecksumsRequest@426a15b4[correlationID=76070213-be7f-40c5-bfeb-9a9a821e2799, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-GetChecksumsClientComponentTest-cibuild01, from=oneContributorNotRespondingTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@5d0a60f1[fileID=<null>, allFileIDs=true], checksumRequestForExistingFile=<null>]
Result: Received event: 76070213: GET_CHECKSUMS: IDENTIFY_REQUEST_SENT: , Identifying pillars for GetChecksums
Step: Send a identification response from contributor1.
Result: Received event: 76070213: GET_CHECKSUMS: COMPONENT_IDENTIFIED: ContributorID Pillar1
Step: Wait 1 second.
Result: Received event: 76070213: GET_CHECKSUMS: IDENTIFY_TIMEOUT: , Time has run out for looking up contributors
The following contributors didn't respond: [Pillar2]
Result: Received event: 76070213: GET_CHECKSUMS: COMPONENT_FAILED: ContributorID Pillar2 ResponseCode: null, Timeout for identifying contributor
Result: Received event: 76070213: GET_CHECKSUMS: IDENTIFICATION_COMPLETE: Contributors: [Pillar1]
Result: Received event: 76070213: GET_CHECKSUMS: REQUEST_SENT: ContributorID [Pillar1], Sending GetFileIDsRequest's
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.GetChecksumsRequest@4b07b838[correlationID=76070213-be7f-40c5-bfeb-9a9a821e2799, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-GetChecksumsClientComponentTest-cibuild01, from=oneContributorNotRespondingTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, pillarID=Pillar1, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@5c794b5a[fileID=<null>, allFileIDs=true], minTimestamp=<null>, maxTimestamp=<null>, maxNumberOfResults=<null>, checksumRequestForExistingFile=<null>, resultAddress=<null>]
Step: Verify that the client continues to the performing phase.
Step: Send a final response upload message
Result: Received event: 76070213: GET_CHECKSUMS: COMPONENT_COMPLETE: ContributorID Pillar1, PartialResult=false
Result: Received event: 76070213: GET_CHECKSUMS: FAILED: , Failed operation. Cause(s):
[76070213: GET_CHECKSUMS: COMPONENT_FAILED: ContributorID Pillar2 ResponseCode: null, Timeout for identifying contributor]
Test success: oneContributorNotRespondingTest
Test starting: operationTimeoutTest
Description: Tests the the client handles lack of final responses gracefully.
Step: Set a 100 ms operation timeout.
Step: Start the operation
Stimuli: Calling getChecksums(null, null, null, null, org.bitrepository.client.TestEventHandler@68661b94, null)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForGetChecksumsRequest@6de7643c[correlationID=030773ac-fb4f-4cf3-a80b-c67c4b51fb5e, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-GetChecksumsClientComponentTest-cibuild01, from=operationTimeoutTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@787eb31b[fileID=<null>, allFileIDs=true], checksumRequestForExistingFile=<null>]
Result: Received event: 030773ac: GET_CHECKSUMS: IDENTIFY_REQUEST_SENT: , Identifying pillars for GetChecksums
Step: Send positive responses from the pillar1 and a negative response from pillar2
Result: Received event: 030773ac: GET_CHECKSUMS: COMPONENT_IDENTIFIED: ContributorID Pillar1
Result: Received event: 030773ac: GET_CHECKSUMS: COMPONENT_FAILED: ContributorID Pillar2 ResponseCode: IDENTIFICATION_NEGATIVE
Result: Received event: 030773ac: GET_CHECKSUMS: IDENTIFICATION_COMPLETE: Contributors: [Pillar1]
Result: Received event: 030773ac: GET_CHECKSUMS: REQUEST_SENT: ContributorID [Pillar1], Sending GetFileIDsRequest's
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.GetChecksumsRequest@70178324[correlationID=030773ac-fb4f-4cf3-a80b-c67c4b51fb5e, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-GetChecksumsClientComponentTest-cibuild01, from=operationTimeoutTest, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, pillarID=Pillar1, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@2607cf9e[fileID=<null>, allFileIDs=true], minTimestamp=<null>, maxTimestamp=<null>, maxNumberOfResults=<null>, checksumRequestForExistingFile=<null>, resultAddress=<null>]
Step: Wait for 1 second
Result: Received event: 030773ac: GET_CHECKSUMS: FAILED: , Failed to receive responses from all contributors before timeout(100ms). Missing contributors [Pillar1]
Test success: operationTimeoutTest
Test starting: getChecksumsDeliveredAtUrl
Description: Tests the delivery of checksums from all pillars at a given URL.
Step: Ensure the delivery file isn't already present on the http server
Step: Request the delivery of the checksum of a file from all pillars.
Stimuli: Calling getChecksums(null, default-test-file.txt, null, file:../bitrepository-core/src/test/resources/test-files//TEST-CHECKSUM-DELIVERY.xml, org.bitrepository.client.TestEventHandler@433b9807, TEST-AUDIT)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForGetChecksumsRequest@d9a9c76[correlationID=d38e2965-e301-4907-b909-cfdccb3fdafa, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-GetChecksumsClientComponentTest-cibuild01, from=getChecksumsDeliveredAtUrl, to=<null>, version=28, minVersion=24, auditTrailInformation=TEST-AUDIT, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@44414bd4[fileID=default-test-file.txt, allFileIDs=<null>], checksumRequestForExistingFile=<null>]
Result: Received event: d38e2965: GET_CHECKSUMS for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for GetChecksums
Step: The pillar sends a response to the identify message.
Result: Received event: d38e2965: GET_CHECKSUMS for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar1
Result: Received event: d38e2965: GET_CHECKSUMS for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar2
Result: Received event: d38e2965: GET_CHECKSUMS for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: [Pillar2, Pillar1]
Result: Received event: d38e2965: GET_CHECKSUMS for file default-test-file.txt: REQUEST_SENT: ContributorID [Pillar1, Pillar2], Sending GetFileIDsRequest's
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.GetChecksumsRequest@293c1612[correlationID=d38e2965-e301-4907-b909-cfdccb3fdafa, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-GetChecksumsClientComponentTest-cibuild01, from=getChecksumsDeliveredAtUrl, to=<null>, version=28, minVersion=24, auditTrailInformation=TEST-AUDIT, pillarID=Pillar1, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@67edf70a[fileID=default-test-file.txt, allFileIDs=<null>], minTimestamp=<null>, maxTimestamp=<null>, maxNumberOfResults=<null>, checksumRequestForExistingFile=<null>, resultAddress=file:../bitrepository-core/src/test/resources/test-files//TEST-CHECKSUM-DELIVERY.xml-Pillar1]
Result: Received message on Pillar2_topic-cibuild01 : org.bitrepository.bitrepositorymessages.GetChecksumsRequest@48e25867[correlationID=d38e2965-e301-4907-b909-cfdccb3fdafa, collectionID=TwoPillarCollection, destination=Pillar2_topic-cibuild01, replyTo=TEST-TOPIC-GetChecksumsClientComponentTest-cibuild01, from=getChecksumsDeliveredAtUrl, to=<null>, version=28, minVersion=24, auditTrailInformation=TEST-AUDIT, pillarID=Pillar2, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@5a06a235[fileID=default-test-file.txt, allFileIDs=<null>], minTimestamp=<null>, maxTimestamp=<null>, maxNumberOfResults=<null>, checksumRequestForExistingFile=<null>, resultAddress=file:../bitrepository-core/src/test/resources/test-files//TEST-CHECKSUM-DELIVERY.xml-Pillar2]
Step: Sends a final response from each pillar
Result: Received event: d38e2965: GET_CHECKSUMS for file default-test-file.txt: COMPONENT_COMPLETE: ContributorID Pillar1, NumberOfChecksums=0, PartialResult=false
Result: Received event: d38e2965: GET_CHECKSUMS for file default-test-file.txt: COMPONENT_COMPLETE: ContributorID Pillar2, NumberOfChecksums=0, PartialResult=false
Result: Received event: d38e2965: GET_CHECKSUMS for file default-test-file.txt: COMPLETE:
Test success: getChecksumsDeliveredAtUrl
Result: The following messages haven't been handled by the testcase:
org.bitrepository.bitrepositorymessages.GetChecksumsRequest@48e25867[correlationID=d38e2965-e301-4907-b909-cfdccb3fdafa, collectionID=TwoPillarCollection, destination=Pillar2_topic-cibuild01, replyTo=TEST-TOPIC-GetChecksumsClientComponentTest-cibuild01, from=getChecksumsDeliveredAtUrl, to=<null>, version=28, minVersion=24, auditTrailInformation=TEST-AUDIT, pillarID=Pillar2, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@5a06a235[fileID=default-test-file.txt, allFileIDs=<null>], minTimestamp=<null>, maxTimestamp=<null>, maxNumberOfResults=<null>, checksumRequestForExistingFile=<null>, resultAddress=file:../bitrepository-core/src/test/resources/test-files//TEST-CHECKSUM-DELIVERY.xml-Pillar2]
02:19:54.447 WARN o.b.protocol.bus.MessageReceiver - The following messages haven't been handled by the testcase:
org.bitrepository.bitrepositorymessages.GetChecksumsRequest@48e25867[correlationID=d38e2965-e301-4907-b909-cfdccb3fdafa, collectionID=TwoPillarCollection, destination=Pillar2_topic-cibuild01, replyTo=TEST-TOPIC-GetChecksumsClientComponentTest-cibuild01, from=getChecksumsDeliveredAtUrl, to=<null>, version=28, minVersion=24, auditTrailInformation=TEST-AUDIT, pillarID=Pillar2, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@5a06a235[fileID=default-test-file.txt, allFileIDs=<null>], minTimestamp=<null>, maxTimestamp=<null>, maxNumberOfResults=<null>, checksumRequestForExistingFile=<null>, resultAddress=file:../bitrepository-core/src/test/resources/test-files//TEST-CHECKSUM-DELIVERY.xml-Pillar2]
Test starting: getChecksumsFromOtherCollection
Description: Tests the getChecksums client will correctly try to get from a second collection if required
Added fixture: Configure collection1 to contain both pillars and collection 2 to only contain pillar2
Step: Request the putting of a file through the PutClient for collection2
Stimuli: Calling getChecksums(null, null, null, null, org.bitrepository.client.TestEventHandler@20fc59c2, null)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForGetChecksumsRequest@34a05f9[correlationID=8de6fc37-e23a-4f8d-ab49-948a2959018d, collectionID=SinglePillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-GetChecksumsClientComponentTest-cibuild01, from=getChecksumsFromOtherCollection, to=Pillar2, version=28, minVersion=24, auditTrailInformation=<null>, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@4c4add5e[fileID=<null>, allFileIDs=true], checksumRequestForExistingFile=<null>]
Result: Received event: 8de6fc37: GET_CHECKSUMS: IDENTIFY_REQUEST_SENT: , Identifying pillars for GetChecksums
Step: Send an identification response from pillar2.
Result: Received event: 8de6fc37: GET_CHECKSUMS: COMPONENT_IDENTIFIED: ContributorID Pillar2
Result: Received event: 8de6fc37: GET_CHECKSUMS: IDENTIFICATION_COMPLETE: Contributors: [Pillar2]
Result: Received event: 8de6fc37: GET_CHECKSUMS: REQUEST_SENT: ContributorID [Pillar2], Sending GetFileIDsRequest's
Result: Received message on Pillar2_topic-cibuild01 : org.bitrepository.bitrepositorymessages.GetChecksumsRequest@27e8a588[correlationID=8de6fc37-e23a-4f8d-ab49-948a2959018d, collectionID=SinglePillarCollection, destination=Pillar2_topic-cibuild01, replyTo=TEST-TOPIC-GetChecksumsClientComponentTest-cibuild01, from=getChecksumsFromOtherCollection, to=Pillar2, version=28, minVersion=24, auditTrailInformation=<null>, pillarID=Pillar2, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@74de0941[fileID=<null>, allFileIDs=true], minTimestamp=<null>, maxTimestamp=<null>, maxNumberOfResults=<null>, checksumRequestForExistingFile=<null>, resultAddress=<null>]
Step: Send a complete event from the pillar
Result: Received event: 8de6fc37: GET_CHECKSUMS: COMPONENT_COMPLETE: ContributorID Pillar2, PartialResult=false
Result: Received event: 8de6fc37: GET_CHECKSUMS: COMPLETE:
Test success: getChecksumsFromOtherCollection
Test starting: getChecksumsFromSinglePillar
Description: Tests that the client can retrieve checksums from a single pillar.
Step: Request the delivery of the checksum of a file from pillar1.
Stimuli: Calling getChecksums([ContributorQuery{componentID='Pillar1, minTimestamp=null, maxTimestamp=null, maxNumberOfResults=null}], default-test-file.txt, org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@72b06c51[checksumType=MD5, checksumSalt=<null>, otherChecksumType=<null>], null, org.bitrepository.client.TestEventHandler@11861ce0, TEST-AUDIT)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForGetChecksumsRequest@3efae691[correlationID=2cbf36f0-d5c1-46ec-9182-5eab022b4413, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-GetChecksumsClientComponentTest-cibuild01, from=getChecksumsFromSinglePillar, to=Pillar1, version=28, minVersion=24, auditTrailInformation=TEST-AUDIT, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@3d85a2a0[fileID=default-test-file.txt, allFileIDs=<null>], checksumRequestForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@72b06c51[checksumType=MD5, checksumSalt=<null>, otherChecksumType=<null>]]
Result: Received event: 2cbf36f0: GET_CHECKSUMS for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for GetChecksums
Step: Sends a response from pillar2.
Step: Sends a response from pillar1.
Result: Received event: 2cbf36f0: GET_CHECKSUMS for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar1
Result: Received event: 2cbf36f0: GET_CHECKSUMS for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: [Pillar1]
Result: Received event: 2cbf36f0: GET_CHECKSUMS for file default-test-file.txt: REQUEST_SENT: ContributorID [Pillar1], Sending GetFileIDsRequest's
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.GetChecksumsRequest@6de6f7cd[correlationID=2cbf36f0-d5c1-46ec-9182-5eab022b4413, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-GetChecksumsClientComponentTest-cibuild01, from=getChecksumsFromSinglePillar, to=Pillar1, version=28, minVersion=24, auditTrailInformation=TEST-AUDIT, pillarID=Pillar1, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@4415a8e[fileID=default-test-file.txt, allFileIDs=<null>], minTimestamp=<null>, maxTimestamp=<null>, maxNumberOfResults=<null>, checksumRequestForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@72b06c51[checksumType=MD5, checksumSalt=<null>, otherChecksumType=<null>], resultAddress=<null>]
Step: Send a GetChecksumsFinalResponse to the client from pillar1
Result: Received event: 2cbf36f0: GET_CHECKSUMS for file default-test-file.txt: COMPONENT_COMPLETE: ContributorID Pillar1, NumberOfChecksums=0, PartialResult=false
Result: Received event: 2cbf36f0: GET_CHECKSUMS for file default-test-file.txt: COMPLETE:
Test success: getChecksumsFromSinglePillar
Test starting: testNoSuchFile
Description: Testing how a request for a non-existing file is handled.
Step: Setting up variables and such.
Step: Request the delivery of the checksum of a file from the pillar(s). A callback listener should be supplied.
Stimuli: Calling getChecksums(null, default-test-file.txt, null, null, org.bitrepository.client.TestEventHandler@780eaf3f, TEST-AUDIT)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForGetChecksumsRequest@377b582b[correlationID=b6557f72-38e6-4116-b5d9-a4cc69ad44d2, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-GetChecksumsClientComponentTest-cibuild01, from=testNoSuchFile, to=Pillar1, version=28, minVersion=24, auditTrailInformation=TEST-AUDIT, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@1c2b9948[fileID=default-test-file.txt, allFileIDs=<null>], checksumRequestForExistingFile=<null>]
Result: Received event: b6557f72: GET_CHECKSUMS for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for GetChecksums
Step: The pillar sends a response to the identify message.
Result: Received event: b6557f72: GET_CHECKSUMS for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar1
Result: Received event: b6557f72: GET_CHECKSUMS for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: [Pillar1]
Result: Received event: b6557f72: GET_CHECKSUMS for file default-test-file.txt: REQUEST_SENT: ContributorID [Pillar1], Sending GetFileIDsRequest's
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.GetChecksumsRequest@dfb8c98[correlationID=b6557f72-38e6-4116-b5d9-a4cc69ad44d2, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-GetChecksumsClientComponentTest-cibuild01, from=testNoSuchFile, to=Pillar1, version=28, minVersion=24, auditTrailInformation=TEST-AUDIT, pillarID=Pillar1, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@60ac370c[fileID=default-test-file.txt, allFileIDs=<null>], minTimestamp=<null>, maxTimestamp=<null>, maxNumberOfResults=<null>, checksumRequestForExistingFile=<null>, resultAddress=<null>]
Step: Send a error that the file cannot be found.
Result: Received event: b6557f72: GET_CHECKSUMS for file default-test-file.txt: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: FILE_NOT_FOUND_FAILURE, No such file.
Result: Received event: b6557f72: GET_CHECKSUMS for file default-test-file.txt: FAILED: , Failed operation. Cause(s):
[b6557f72: GET_CHECKSUMS for file default-test-file.txt: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: FILE_NOT_FOUND_FAILURE, No such file.]
Test success: testNoSuchFile
Test starting: testPaging
Description: Tests the GetChecksums client correctly handles functionality for limiting results, either by timestamp or result count.
Step: Request checksums from with MinTimestamp, MaxTimestamp, MaxNumberOfResults set for both pillars .
Stimuli: Calling getChecksums([ContributorQuery{componentID='Pillar1, minTimestamp=Thu Oct 15 02:19:55 CEST 2015, maxTimestamp=Thu Oct 15 02:19:56 CEST 2015, maxNumberOfResults=1}, ContributorQuery{componentID='Pillar2, minTimestamp=Thu Oct 15 02:19:56 CEST 2015, maxTimestamp=Thu Oct 15 02:19:56 CEST 2015, maxNumberOfResults=2}], null, null, null, org.bitrepository.client.TestEventHandler@68661b94, null)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForGetChecksumsRequest@3f643af6[correlationID=cd15737d-b26f-4e9f-9197-bac22b73485b, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-GetChecksumsClientComponentTest-cibuild01, from=testPaging, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@1db5a911[fileID=<null>, allFileIDs=true], checksumRequestForExistingFile=<null>]
Result: Received event: cd15737d: GET_CHECKSUMS: IDENTIFY_REQUEST_SENT: , Identifying pillars for GetChecksums
Step: Send a IdentifyPillarsForGetChecksumsResponse from both pillars.
Result: Received event: cd15737d: GET_CHECKSUMS: COMPONENT_IDENTIFIED: ContributorID Pillar1
Result: Received event: cd15737d: GET_CHECKSUMS: COMPONENT_IDENTIFIED: ContributorID Pillar2
Result: Received event: cd15737d: GET_CHECKSUMS: IDENTIFICATION_COMPLETE: Contributors: [Pillar1, Pillar2]
Result: Received event: cd15737d: GET_CHECKSUMS: REQUEST_SENT: ContributorID [Pillar1, Pillar2], Sending GetFileIDsRequest's
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.GetChecksumsRequest@5e209dae[correlationID=cd15737d-b26f-4e9f-9197-bac22b73485b, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-GetChecksumsClientComponentTest-cibuild01, from=testPaging, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, pillarID=Pillar1, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@6e6d5a5a[fileID=<null>, allFileIDs=true], minTimestamp=2015-10-15T02:19:55.321+02:00, maxTimestamp=2015-10-15T02:19:56.221+02:00, maxNumberOfResults=1, checksumRequestForExistingFile=<null>, resultAddress=<null>]
Result: Received message on Pillar2_topic-cibuild01 : org.bitrepository.bitrepositorymessages.GetChecksumsRequest@6310e808[correlationID=cd15737d-b26f-4e9f-9197-bac22b73485b, collectionID=TwoPillarCollection, destination=Pillar2_topic-cibuild01, replyTo=TEST-TOPIC-GetChecksumsClientComponentTest-cibuild01, from=testPaging, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, pillarID=Pillar2, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@4e56ab8d[fileID=<null>, allFileIDs=true], minTimestamp=2015-10-15T02:19:56.221+02:00, maxTimestamp=2015-10-15T02:19:56.321+02:00, maxNumberOfResults=2, checksumRequestForExistingFile=<null>, resultAddress=<null>]
Test success: testPaging
Test starting: verifyGetChecksumsClientFromFactory
Test success: verifyGetChecksumsClientFromFactory
Starting testcase GetFileClientComponentTest
Test starting: chooseFastestPillarGetFileClient
Description: Set the GetClient to retrieve a file as fast as possible, where it has to choose between to pillars with different times. The messages should be delivered at the same time.
Step: Create a GetFileClient configured to use a fast and a slow pillar.
Step: Defining the variables for the GetFileClient and defining them in the configuration
Step: Make the GetClient ask for fastest pillar.
Stimuli: Calling getFileFromFastestPillar(default-test-file.txt, file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForGetFileRequest@64d0f697[correlationID=7a3f6a93-d885-4dcf-85e4-1cc46334db56, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-GetFileClientComponentTest-cibuild01, from=chooseFastestPillarGetFileClient, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, fileID=default-test-file.txt]
Result: Received event: 7a3f6a93: GET_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for GetFile
Step: Three pillars send responses. First an average timeToDeliver, then a fast timeToDeliver and last a slow timeToDeliver.
Result: Received event: 7a3f6a93: GET_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID THE-AVERAGE-PILLAR
Result: Received event: 7a3f6a93: GET_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID THE-FAST-PILLAR
Result: Received event: 7a3f6a93: GET_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID THE-SLOW-PILLAR
Result: Received event: 7a3f6a93: GET_FILE for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: [THE-FAST-PILLAR]
Result: Received event: 7a3f6a93: GET_FILE for file default-test-file.txt: REQUEST_SENT: ContributorID SelectedComponentInfo: componentID=THE-FAST-PILLAR, componentTopic=Pillar1_topic-cibuild01, Sending GetFileRequest to
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.GetFileRequest@191e18d7[correlationID=7a3f6a93-d885-4dcf-85e4-1cc46334db56, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-GetFileClientComponentTest-cibuild01, from=chooseFastestPillarGetFileClient, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, pillarID=THE-FAST-PILLAR, fileID=default-test-file.txt, filePart=<null>, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt]
Test success: chooseFastestPillarGetFileClient
Test starting: conversationTimeout
Description: Tests the the GetFileClient handles lack of IdentifyPillarResponses gracefully
Step: Set the number of pillars to 100ms and a 300 ms timeout for the conversation.
Step: Request the delivery of a file from a specific pillar. A callback listener should be supplied.
Stimuli: Calling getFileFromSpecificPillar(default-test-file.txt, file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, Pillar1)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForGetFileRequest@2da3ae4c[correlationID=642f1696-dcd5-418d-a211-8dd2d848b32d, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-GetFileClientComponentTest-cibuild01, from=conversationTimeout, to=Pillar1, version=28, minVersion=24, auditTrailInformation=<null>, fileID=default-test-file.txt]
Result: Received event: 642f1696: GET_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for GetFile
Step: The pillar sends a response to the identify message.
Result: Received event: 642f1696: GET_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar1
Result: Received event: 642f1696: GET_FILE for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: [Pillar1]
Result: Received event: 642f1696: GET_FILE for file default-test-file.txt: REQUEST_SENT: ContributorID SelectedComponentInfo: componentID=Pillar1, componentTopic=Pillar1_topic-cibuild01, Sending GetFileRequest to
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.GetFileRequest@2f2bb096[correlationID=642f1696-dcd5-418d-a211-8dd2d848b32d, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-GetFileClientComponentTest-cibuild01, from=conversationTimeout, to=Pillar1, version=28, minVersion=24, auditTrailInformation=<null>, pillarID=Pillar1, fileID=default-test-file.txt, filePart=<null>, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt]
Step: Wait for 1 second
02:19:57.946 WARN o.b.c.c.m.CollectionBasedConversationMediator - Failing timed out conversation 642f1696-dcd5-418d-a211-8dd2d848b32d (Age 1012ms)
Result: Received event: 642f1696: GET_FILE for file default-test-file.txt: FAILED: , Failing timed out conversation 642f1696-dcd5-418d-a211-8dd2d848b32d
Test success: conversationTimeout
Test starting: failureDuringPerform
Description: Verify that the GetFile reports a failed operation, in case of a component failing during the performing phase.
Step: Request a getFile from the fastest pillar.
Stimuli: Calling getFileFromFastestPillar(default-test-file.txt, file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForGetFileRequest@5bce1e69[correlationID=3f3f96ad-f502-4208-b6df-c6839a4eadce, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-GetFileClientComponentTest-cibuild01, from=failureDuringPerform, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, fileID=default-test-file.txt]
Result: Received event: 3f3f96ad: GET_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for GetFile
Step: Send a identification response from pillar1 and pillar2 with pillar1 the fastest.
Result: Received event: 3f3f96ad: GET_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar1
Result: Received event: 3f3f96ad: GET_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar2
Result: Received event: 3f3f96ad: GET_FILE for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: [Pillar1]
Result: Received event: 3f3f96ad: GET_FILE for file default-test-file.txt: REQUEST_SENT: ContributorID SelectedComponentInfo: componentID=Pillar1, componentTopic=Pillar1_topic-cibuild01, Sending GetFileRequest to
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.GetFileRequest@50e46059[correlationID=3f3f96ad-f502-4208-b6df-c6839a4eadce, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-GetFileClientComponentTest-cibuild01, from=failureDuringPerform, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, pillarID=Pillar1, fileID=default-test-file.txt, filePart=<null>, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt]
Step: Send a failure response from pillar1
Result: Received event: 3f3f96ad: GET_FILE for file default-test-file.txt: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: FAILURE
Result: Received event: 3f3f96ad: GET_FILE for file default-test-file.txt: FAILED: , Failed to get file from Pillar1, org.bitrepository.bitrepositoryelements.ResponseInfo@f915ab3[responseCode=FAILURE, responseText=<null>]
Test success: failureDuringPerform
Test starting: getFileClientWithChecksumPillarInvolved
Description: Verify that the GetFile works correctly when a checksum pillar respond.
Step: Call getFile form fastest pillar.
Stimuli: Calling getFileFromFastestPillar(default-test-file.txt, file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForGetFileRequest@33a49aca[correlationID=1ea4fce0-8371-4c5d-a556-57038bbefc9b, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-GetFileClientComponentTest-cibuild01, from=getFileClientWithChecksumPillarInvolved, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, fileID=default-test-file.txt]
Result: Received event: 1ea4fce0: GET_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for GetFile
Step: Send a identification response from pillar1 with a REQUEST_NOT_SUPPORTED response code.
Step: Send a identification response from pillar2 with a IDENTIFICATION_POSITIVE response code .
Result: Received event: 1ea4fce0: GET_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar2
Result: Received event: 1ea4fce0: GET_FILE for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: [Pillar2]
Result: Received event: 1ea4fce0: GET_FILE for file default-test-file.txt: REQUEST_SENT: ContributorID SelectedComponentInfo: componentID=Pillar2, componentTopic=Pillar2_topic-cibuild01, Sending GetFileRequest to
Result: Received message on Pillar2_topic-cibuild01 : org.bitrepository.bitrepositorymessages.GetFileRequest@4d4f6efb[correlationID=1ea4fce0-8371-4c5d-a556-57038bbefc9b, collectionID=TwoPillarCollection, destination=Pillar2_topic-cibuild01, replyTo=TEST-TOPIC-GetFileClientComponentTest-cibuild01, from=getFileClientWithChecksumPillarInvolved, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, pillarID=Pillar2, fileID=default-test-file.txt, filePart=<null>, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt]
Step: Verify that the client continues to the performing phase.
Step: Send a final response upload message
Result: Received event: 1ea4fce0: GET_FILE for file default-test-file.txt: COMPONENT_COMPLETE: ContributorID Pillar2
Result: Received event: 1ea4fce0: GET_FILE for file default-test-file.txt: COMPLETE:
Test success: getFileClientWithChecksumPillarInvolved
Test starting: getFileClientWithIdentifyTimeout
Description: Verify that the GetFile works correct without receiving responses from all pillars.
Added fixture: Set the identification timeout to 500ms
Step: Call getFile form fastest pillar.
Stimuli: Calling getFileFromFastestPillar(default-test-file.txt, file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForGetFileRequest@1bd09bbc[correlationID=20953e5a-95e3-4c8f-a5d4-68986673f1ba, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-GetFileClientComponentTest-cibuild01, from=getFileClientWithIdentifyTimeout, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, fileID=default-test-file.txt]
Result: Received event: 20953e5a: GET_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for GetFile
Step: Send a identification response from pillar1.
Result: Received event: 20953e5a: GET_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar1
Step: Wait 1 second.
Result: Received event: 20953e5a: GET_FILE for file default-test-file.txt: IDENTIFY_TIMEOUT: , Time has run out for looking up contributors
The following contributors didn't respond: [Pillar2]
Result: Received event: 20953e5a: GET_FILE for file default-test-file.txt: COMPONENT_FAILED: ContributorID Pillar2 ResponseCode: null, Timeout for identifying contributor
Result: Received event: 20953e5a: GET_FILE for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: [Pillar1]
Result: Received event: 20953e5a: GET_FILE for file default-test-file.txt: REQUEST_SENT: ContributorID SelectedComponentInfo: componentID=Pillar1, componentTopic=Pillar1_topic-cibuild01, Sending GetFileRequest to
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.GetFileRequest@1a987d4c[correlationID=20953e5a-95e3-4c8f-a5d4-68986673f1ba, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-GetFileClientComponentTest-cibuild01, from=getFileClientWithIdentifyTimeout, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, pillarID=Pillar1, fileID=default-test-file.txt, filePart=<null>, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt]
Step: Verify that the client continues to the performing phase.
Step: Send a final response upload message
Result: Received event: 20953e5a: GET_FILE for file default-test-file.txt: COMPONENT_COMPLETE: ContributorID Pillar1
Result: Received event: 20953e5a: GET_FILE for file default-test-file.txt: COMPLETE:
Test success: getFileClientWithIdentifyTimeout
Test starting: getFileFromOtherCollection
Description: Tests the getFiles client will correctly try to get from a second collection if required
Added fixture: Configure collection1 to contain both pillars and collection 2 to only contain pillar2
Step: Request the getting of a file through the client for collection2
Stimuli: Calling getFileFromFastestPillar(default-test-file.txt, file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForGetFileRequest@3d4da817[correlationID=4a973183-f53c-4bcc-87ef-9efd7121c641, collectionID=SinglePillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-GetFileClientComponentTest-cibuild01, from=getFileFromOtherCollection, to=Pillar2, version=28, minVersion=24, auditTrailInformation=<null>, fileID=default-test-file.txt]
Result: Received event: 4a973183: GET_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for GetFile
Step: Send an identification response from pillar2.
Result: Received event: 4a973183: GET_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar2
Result: Received event: 4a973183: GET_FILE for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: [Pillar2]
Result: Received event: 4a973183: GET_FILE for file default-test-file.txt: REQUEST_SENT: ContributorID SelectedComponentInfo: componentID=Pillar2, componentTopic=Pillar2_topic-cibuild01, Sending GetFileRequest to
Result: Received message on Pillar2_topic-cibuild01 : org.bitrepository.bitrepositorymessages.GetFileRequest@3d7f8110[correlationID=4a973183-f53c-4bcc-87ef-9efd7121c641, collectionID=SinglePillarCollection, destination=Pillar2_topic-cibuild01, replyTo=TEST-TOPIC-GetFileClientComponentTest-cibuild01, from=getFileFromOtherCollection, to=Pillar2, version=28, minVersion=24, auditTrailInformation=<null>, pillarID=Pillar2, fileID=default-test-file.txt, filePart=<null>, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt]
Step: Send a complete event from the pillar
Result: Received event: 4a973183: GET_FILE for file default-test-file.txt: COMPONENT_COMPLETE: ContributorID Pillar2
Result: Received event: 4a973183: GET_FILE for file default-test-file.txt: COMPLETE:
Test success: getFileFromOtherCollection
Test starting: getFileFromSpecificPillar
Description: Tests that the GetClient client works correctly when requesting a file from a specific pillar
Step: Request the delivery of a file from pillar2.
Stimuli: Calling getFileFromSpecificPillar(default-test-file.txt, file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, Pillar2)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForGetFileRequest@5b294fe7[correlationID=e287ba3b-9234-4109-bd85-09d134dfc8cb, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-GetFileClientComponentTest-cibuild01, from=getFileFromSpecificPillar, to=Pillar2, version=28, minVersion=24, auditTrailInformation=AuditTrailInfo for getFileFromSpecificPillarTest, fileID=default-test-file.txt]
Result: Received event: e287ba3b: GET_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for GetFile
Step: Send a response from pillar1
Step: Send a response from pillar2
Result: Received event: e287ba3b: GET_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar2
Result: Received event: e287ba3b: GET_FILE for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: [Pillar2]
Result: Received event: e287ba3b: GET_FILE for file default-test-file.txt: REQUEST_SENT: ContributorID SelectedComponentInfo: componentID=Pillar2, componentTopic=Pillar2_topic-cibuild01, Sending GetFileRequest to
Result: Received message on Pillar2_topic-cibuild01 : org.bitrepository.bitrepositorymessages.GetFileRequest@46ca7c9[correlationID=e287ba3b-9234-4109-bd85-09d134dfc8cb, collectionID=TwoPillarCollection, destination=Pillar2_topic-cibuild01, replyTo=TEST-TOPIC-GetFileClientComponentTest-cibuild01, from=getFileFromSpecificPillar, to=Pillar2, version=28, minVersion=24, auditTrailInformation=AuditTrailInfo for getFileFromSpecificPillarTest, pillarID=Pillar2, fileID=default-test-file.txt, filePart=<null>, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt]
Step: Send a GetFileProgressResponse.
Result: Received event: e287ba3b: GET_FILE for file default-test-file.txt: PROGRESS: ContributorID Pillar2, First test progress response message
Step: Send a GetFileFinalResponse.
Result: Received event: e287ba3b: GET_FILE for file default-test-file.txt: COMPONENT_COMPLETE: ContributorID Pillar2
Result: Received event: e287ba3b: GET_FILE for file default-test-file.txt: COMPLETE:
Test success: getFileFromSpecificPillar
Test starting: getFileFromSpecificPillarWithFilePart
Description: Tests that the GetClient client works for a single pillar participates. Also validate, that the 'FilePart' can be used.
Step: Set the number of pillars to 1
Step: Request the delivery of a file from a specific pillar. A callback listener should be supplied.
Stimuli: Calling getFileFromSpecificPillar(default-test-file.txt, file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, Pillar1)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForGetFileRequest@777777f2[correlationID=27d301b1-29d8-42f5-8d99-02a10f8e7e9e, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-GetFileClientComponentTest-cibuild01, from=getFileFromSpecificPillarWithFilePart, to=Pillar1, version=28, minVersion=24, auditTrailInformation=<null>, fileID=default-test-file.txt]
Result: Received event: 27d301b1: GET_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for GetFile
Step: The pillar sends a response to the identify message.
Result: Received event: 27d301b1: GET_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar1
Result: Received event: 27d301b1: GET_FILE for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: [Pillar1]
Result: Received event: 27d301b1: GET_FILE for file default-test-file.txt: REQUEST_SENT: ContributorID SelectedComponentInfo: componentID=Pillar1, componentTopic=Pillar1_topic-cibuild01, Sending GetFileRequest to
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.GetFileRequest@7bec1342[correlationID=27d301b1-29d8-42f5-8d99-02a10f8e7e9e, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-GetFileClientComponentTest-cibuild01, from=getFileFromSpecificPillarWithFilePart, to=Pillar1, version=28, minVersion=24, auditTrailInformation=<null>, pillarID=Pillar1, fileID=default-test-file.txt, filePart=org.bitrepository.bitrepositoryelements.FilePart@27b4172d[partOffSet=1, partLength=10], fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt]
Step: The pillar sends a getFile response to the GetClient.
Result: Received event: 27d301b1: GET_FILE for file default-test-file.txt: PROGRESS: ContributorID Pillar1, First test progress response message
Step: The file is uploaded to the indicated url and the pillar sends a final response upload message
Result: Received event: 27d301b1: GET_FILE for file default-test-file.txt: COMPONENT_COMPLETE: ContributorID Pillar1
Result: Received event: 27d301b1: GET_FILE for file default-test-file.txt: COMPLETE:
Test success: getFileFromSpecificPillarWithFilePart
Test starting: noIdentifyResponse
Description: Tests the the GetFileClient handles lack of IdentifyPillarResponses gracefully
Step: Set a 500 ms timeout for identifying pillar.
Step: Make the GetClient ask for fastest pillar.
Stimuli: Calling getFileFromFastestPillar(default-test-file.txt, file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForGetFileRequest@50bbad5c[correlationID=6eaa7ce5-dd4c-45d3-82fe-c3dfffe48d54, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-GetFileClientComponentTest-cibuild01, from=noIdentifyResponse, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, fileID=default-test-file.txt]
Result: Received event: 6eaa7ce5: GET_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for GetFile
Step: Wait for 1 seconds
Result: Received event: 6eaa7ce5: GET_FILE for file default-test-file.txt: IDENTIFY_TIMEOUT: , Time has run out for looking up contributors
The following contributors didn't respond: [Pillar1, Pillar2]
Result: Received event: 6eaa7ce5: GET_FILE for file default-test-file.txt: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: null, Timeout for identifying contributor
Result: Received event: 6eaa7ce5: GET_FILE for file default-test-file.txt: COMPONENT_FAILED: ContributorID Pillar2 ResponseCode: null, Timeout for identifying contributor
Result: Received event: 6eaa7ce5: GET_FILE for file default-test-file.txt: FAILED: , Unable to continue operation, contributors unavailable.
Test success: noIdentifyResponse
Test starting: singleComponentFailureDuringIdentify
Description: Verify that the GetFile reports a complete (not failed), in case of a component failing during the identify phase.
Step: Call getFile from the fastest pillar.
Stimuli: Calling getFileFromFastestPillar(default-test-file.txt, file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForGetFileRequest@36a0cf2b[correlationID=9b0659ff-08e0-4714-9027-653687bb578b, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-GetFileClientComponentTest-cibuild01, from=singleComponentFailureDuringIdentify, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, fileID=default-test-file.txt]
Result: Received event: 9b0659ff: GET_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for GetFile
Step: Send a identification response from pillar1 with a IDENTIFICATION_NEGATIVE response code .
Result: Received event: 9b0659ff: GET_FILE for file default-test-file.txt: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: IDENTIFICATION_NEGATIVE
Step: Send a identification response from pillar2 with a IDENTIFICATION_POSITIVE response code .
Result: Received event: 9b0659ff: GET_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar2
Result: Received event: 9b0659ff: GET_FILE for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: [Pillar2]
Result: Received event: 9b0659ff: GET_FILE for file default-test-file.txt: REQUEST_SENT: ContributorID SelectedComponentInfo: componentID=Pillar2, componentTopic=Pillar2_topic-cibuild01, Sending GetFileRequest to
Result: Received message on Pillar2_topic-cibuild01 : org.bitrepository.bitrepositorymessages.GetFileRequest@156d8f7b[correlationID=9b0659ff-08e0-4714-9027-653687bb578b, collectionID=TwoPillarCollection, destination=Pillar2_topic-cibuild01, replyTo=TEST-TOPIC-GetFileClientComponentTest-cibuild01, from=singleComponentFailureDuringIdentify, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, pillarID=Pillar2, fileID=default-test-file.txt, filePart=<null>, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt]
Step: Verify that the client continues to the performing phase.
Step: Send a final response upload message
Result: Received event: 9b0659ff: GET_FILE for file default-test-file.txt: COMPONENT_COMPLETE: ContributorID Pillar2
Result: Received event: 9b0659ff: GET_FILE for file default-test-file.txt: COMPLETE:
Test success: singleComponentFailureDuringIdentify
Test starting: testNoSuchFileMultiplePillars
Description: Testing how a request for a non-existing file is handled when all pillars miss the file.
Step: Use the default 2 pillars.
Step: Call getFileFromFastestPillar.
Stimuli: Calling getFileFromFastestPillar(ERROR-NO-SUCH-FILE-ERROR, file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForGetFileRequest@26e7b0bd[correlationID=3a70ced5-207e-4b2e-bfbc-377d4f660603, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-GetFileClientComponentTest-cibuild01, from=testNoSuchFileMultiplePillars, to=<null>, version=28, minVersion=24, auditTrailInformation=<null>, fileID=ERROR-NO-SUCH-FILE-ERROR]
Result: Received event: 3a70ced5: GET_FILE for file ERROR-NO-SUCH-FILE-ERROR: IDENTIFY_REQUEST_SENT: , Identifying pillars for GetFile
Step: Both pillars sends a FILE_NOT_FOUND response
Result: Received event: 3a70ced5: GET_FILE for file ERROR-NO-SUCH-FILE-ERROR: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: FILE_NOT_FOUND_FAILURE, File ERROR-NO-SUCH-FILE-ERROR not present on this pillar
Result: Received event: 3a70ced5: GET_FILE for file ERROR-NO-SUCH-FILE-ERROR: COMPONENT_FAILED: ContributorID Pillar2 ResponseCode: FILE_NOT_FOUND_FAILURE, File ERROR-NO-SUCH-FILE-ERRORnot present on this pillar
Result: Received event: 3a70ced5: GET_FILE for file ERROR-NO-SUCH-FILE-ERROR: FAILED: , Unable to continue operation, contributors unavailable.
Test success: testNoSuchFileMultiplePillars
Test starting: testNoSuchFileSpecificPillar
Description: Testing how a request for a non-existing file is handled on a specific pillar request.
Step: Define 1 pillar.
Step: Call getFileFromSpecificPillar.
Stimuli: Calling getFileFromSpecificPillar(ERROR-NO-SUCH-FILE-ERROR, file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, Pillar1)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForGetFileRequest@cf9073a[correlationID=eb6abc3c-f86d-423e-b7f6-6758bc92bf83, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-GetFileClientComponentTest-cibuild01, from=testNoSuchFileSpecificPillar, to=Pillar1, version=28, minVersion=24, auditTrailInformation=<null>, fileID=ERROR-NO-SUCH-FILE-ERROR]
Result: Received event: eb6abc3c: GET_FILE for file ERROR-NO-SUCH-FILE-ERROR: IDENTIFY_REQUEST_SENT: , Identifying pillars for GetFile
Step: The specified pillars sends a FILE_NOT_FOUND response
Result: Received event: eb6abc3c: GET_FILE for file ERROR-NO-SUCH-FILE-ERROR: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: FILE_NOT_FOUND_FAILURE, File ERROR-NO-SUCH-FILE-ERROR not present on this pillar Pillar1
Result: Received event: eb6abc3c: GET_FILE for file ERROR-NO-SUCH-FILE-ERROR: FAILED: , Unable to continue operation, contributors unavailable.
Test success: testNoSuchFileSpecificPillar
Test starting: verifyGetFileClientFromFactory
Test success: verifyGetFileClientFromFactory
Starting testcase DeleteFileClientComponentTest
Test starting: deleteClientIdentificationTimeout
Description: Tests the handling of a failed identification for the DeleteClient
Step: Initialise the number of pillars and the DeleteClient. Sets the identification timeout to 1 sec.
Step: Request a file to be deleted on the default pillar.
Stimuli: Calling deleteFile(default-test-file.txt, Pillar1, org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@4d07c08d[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@1de5e942[checksumType=MD5, checksumSalt=<null>, otherChecksumType=<null>], checksumValue={49,50,51,99,104,101,99,107,115,117,109,51,50,49}, calculationTimestamp=1970-01-01T01:00:00.000+01:00], org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@1089512e[checksumType=SHA1, checksumSalt=<null>, otherChecksumType=<null>], eventHandler, null)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForDeleteFileRequest@41e65db7[correlationID=be36a200-ac1d-465f-8be2-5ed3497d03fe, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-DeleteFileClientComponentTest-cibuild01, from=deleteClientIdentificationTimeout, to=Pillar1, version=28, minVersion=24, auditTrailInformation=<null>, fileID=default-test-file.txt]
Result: Received event: be36a200: DELETE_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for delete file
Step: Do not respond. Just await the timeout.
Result: Received event: be36a200: DELETE_FILE for file default-test-file.txt: IDENTIFY_TIMEOUT: , Time has run out for looking up contributors
The following contributors didn't respond: [Pillar1]
Result: Received event: be36a200: DELETE_FILE for file default-test-file.txt: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: null, Timeout for identifying contributor
Result: Received event: be36a200: DELETE_FILE for file default-test-file.txt: FAILED: , Unable to continue operation, contributors unavailable.
Test success: deleteClientIdentificationTimeout
Test starting: deleteClientOperationTimeout
Description: Tests the handling of a failed operation for the DeleteClient
Step: Initialise the number of pillars and the DeleteClient. Sets the operation timeout to 100 ms.
Step: Request a file to be deleted on the default pillar.
Stimuli: Calling deleteFile(default-test-file.txt, Pillar1, org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@5761748e[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@58f72035[checksumType=MD5, checksumSalt=<null>, otherChecksumType=<null>], checksumValue={49,50,51,99,104,101,99,107,115,117,109,51,50,49}, calculationTimestamp=1970-01-01T01:00:00.000+01:00], org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@1b67989d[checksumType=SHA1, checksumSalt=<null>, otherChecksumType=<null>], eventHandler, null)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForDeleteFileRequest@6b532a5[correlationID=bc07a760-887f-4412-baa2-fe1e6cf1e0b3, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-DeleteFileClientComponentTest-cibuild01, from=deleteClientOperationTimeout, to=Pillar1, version=28, minVersion=24, auditTrailInformation=<null>, fileID=default-test-file.txt]
Result: Received event: bc07a760: DELETE_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for delete file
Step: Make response for the pillar.
Result: Received event: bc07a760: DELETE_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar1
Result: Received event: bc07a760: DELETE_FILE for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: [Pillar1]
Result: Received event: bc07a760: DELETE_FILE for file default-test-file.txt: REQUEST_SENT: ContributorID [Pillar1], Sending request for deleting file
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.DeleteFileRequest@3bbb9611[correlationID=bc07a760-887f-4412-baa2-fe1e6cf1e0b3, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-DeleteFileClientComponentTest-cibuild01, from=deleteClientOperationTimeout, to=Pillar1, version=28, minVersion=24, auditTrailInformation=<null>, pillarID=Pillar1, fileID=default-test-file.txt, checksumDataForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@5761748e[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@58f72035[checksumType=MD5, checksumSalt=<null>, otherChecksumType=<null>], checksumValue={49,50,51,99,104,101,99,107,115,117,109,51,50,49}, calculationTimestamp=1970-01-01T01:00:00.000+01:00], checksumRequestForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@1b67989d[checksumType=SHA1, checksumSalt=<null>, otherChecksumType=<null>]]
Step: Validate the steps of the DeleteClient by going through the events.
Step: Do not respond. Just await the timeout.
Result: Received event: bc07a760: DELETE_FILE for file default-test-file.txt: FAILED: , Failed to receive responses from all contributors before timeout(100ms). Missing contributors [Pillar1]
Test success: deleteClientOperationTimeout
Test starting: deleteClientOtherPillarFailedDuringIdentification
Description: Tests the handling of a identification failure for a pillar for the DeleteClient.
Step: Request a file to be deleted on the pillar1.
Stimuli: Calling deleteFile(default-test-file.txt, Pillar1, org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@4fb4bffa[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@181bb932[checksumType=MD5, checksumSalt=<null>, otherChecksumType=<null>], checksumValue={-108,10,81,-78,80,-25,-86,-126,-40,-24,-22,49,33,127,-14,103}, calculationTimestamp=2015-10-15T02:20:03.524+02:00], null, eventHandler, null)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForDeleteFileRequest@6279d5fe[correlationID=9abc4a7f-f7c9-442d-82df-fb67276b74bc, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-DeleteFileClientComponentTest-cibuild01, from=deleteClientOtherPillarFailedDuringIdentification, to=Pillar1, version=28, minVersion=24, auditTrailInformation=<null>, fileID=default-test-file.txt]
Result: Received event: 9abc4a7f: DELETE_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for delete file
Step: Send a failed response from pillar2.
Step: Send a ok response from pillar1.
Result: Received event: 9abc4a7f: DELETE_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar1
Result: Received event: 9abc4a7f: DELETE_FILE for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: [Pillar1]
Result: Received event: 9abc4a7f: DELETE_FILE for file default-test-file.txt: REQUEST_SENT: ContributorID [Pillar1], Sending request for deleting file
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.DeleteFileRequest@7fbe92c6[correlationID=9abc4a7f-f7c9-442d-82df-fb67276b74bc, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-DeleteFileClientComponentTest-cibuild01, from=deleteClientOtherPillarFailedDuringIdentification, to=Pillar1, version=28, minVersion=24, auditTrailInformation=<null>, pillarID=Pillar1, fileID=default-test-file.txt, checksumDataForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@4fb4bffa[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@181bb932[checksumType=MD5, checksumSalt=<null>, otherChecksumType=<null>], checksumValue={-108,10,81,-78,80,-25,-86,-126,-40,-24,-22,49,33,127,-14,103}, calculationTimestamp=2015-10-15T02:20:03.524+02:00], checksumRequestForExistingFile=<null>]
Step: Send a final response message from pillar 1 to the DeleteClient.
Result: Received event: 9abc4a7f: DELETE_FILE for file default-test-file.txt: COMPONENT_COMPLETE: ContributorID Pillar1, DeleteFileResult=null
Result: Received event: 9abc4a7f: DELETE_FILE for file default-test-file.txt: COMPLETE:
Test success: deleteClientOtherPillarFailedDuringIdentification
Test starting: deleteClientPillarFailedDuringPerform
Description: Tests the handling of a operation failure for the DeleteClient.
Step: Initialise the number of pillars to one
Step: Request a file to be deleted on the default pillar.
Stimuli: Calling deleteFile(default-test-file.txt, Pillar1, org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@7d6cb988[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@69e34852[checksumType=MD5, checksumSalt=<null>, otherChecksumType=<null>], checksumValue={49,50,51,99,104,101,99,107,115,117,109,51,50,49}, calculationTimestamp=1970-01-01T01:00:00.000+01:00], org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@36ef63b1[checksumType=SHA1, checksumSalt=<null>, otherChecksumType=<null>], eventHandler, null)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForDeleteFileRequest@387a3d5d[correlationID=ba9434b8-f904-49bb-b5e0-7004530fd358, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-DeleteFileClientComponentTest-cibuild01, from=deleteClientPillarFailedDuringPerform, to=Pillar1, version=28, minVersion=24, auditTrailInformation=<null>, fileID=default-test-file.txt]
Result: Received event: ba9434b8: DELETE_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for delete file
Step: Make response for the pillar.
Result: Received event: ba9434b8: DELETE_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar1
Result: Received event: ba9434b8: DELETE_FILE for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: [Pillar1]
Result: Received event: ba9434b8: DELETE_FILE for file default-test-file.txt: REQUEST_SENT: ContributorID [Pillar1], Sending request for deleting file
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.DeleteFileRequest@53100ea1[correlationID=ba9434b8-f904-49bb-b5e0-7004530fd358, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-DeleteFileClientComponentTest-cibuild01, from=deleteClientPillarFailedDuringPerform, to=Pillar1, version=28, minVersion=24, auditTrailInformation=<null>, pillarID=Pillar1, fileID=default-test-file.txt, checksumDataForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@7d6cb988[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@69e34852[checksumType=MD5, checksumSalt=<null>, otherChecksumType=<null>], checksumValue={49,50,51,99,104,101,99,107,115,117,109,51,50,49}, calculationTimestamp=1970-01-01T01:00:00.000+01:00], checksumRequestForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@36ef63b1[checksumType=SHA1, checksumSalt=<null>, otherChecksumType=<null>]]
Step: Validate the steps of the DeleteClient by going through the events.
Step: Send a failed response message to the DeleteClient.
Result: Received event: ba9434b8: DELETE_FILE for file default-test-file.txt: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: FAILURE, Verifying that a failure can be understood!
Result: Received event: ba9434b8: DELETE_FILE for file default-test-file.txt: FAILED: , Failed operation. Cause(s):
[ba9434b8: DELETE_FILE for file default-test-file.txt: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: FAILURE, Verifying that a failure can be understood!]
Test success: deleteClientPillarFailedDuringPerform
Test starting: deleteClientSpecifiedPillarFailedDuringIdentification
Description: Tests the handling of a identification failure for a pillar for the DeleteClient.
Step: Request a file to be deleted on the pillar1.
Stimuli: Calling deleteFile(default-test-file.txt, Pillar1, org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@73e15f73[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@b966ce3[checksumType=MD5, checksumSalt=<null>, otherChecksumType=<null>], checksumValue={-108,10,81,-78,80,-25,-86,-126,-40,-24,-22,49,33,127,-14,103}, calculationTimestamp=2015-10-15T02:20:04.709+02:00], null, eventHandler, null)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForDeleteFileRequest@4e3ee766[correlationID=e7b5f0ec-6266-41c3-a76c-0b5c903263da, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-DeleteFileClientComponentTest-cibuild01, from=deleteClientSpecifiedPillarFailedDuringIdentification, to=Pillar1, version=28, minVersion=24, auditTrailInformation=<null>, fileID=default-test-file.txt]
Result: Received event: e7b5f0ec: DELETE_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for delete file
Step: Send a failed response from pillar1.
Result: Received event: e7b5f0ec: DELETE_FILE for file default-test-file.txt: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: IDENTIFICATION_NEGATIVE
Result: Received event: e7b5f0ec: DELETE_FILE for file default-test-file.txt: FAILED: , Can not continue with delete operation, as Pillar1 is unable to perform the deletion.
Test success: deleteClientSpecifiedPillarFailedDuringIdentification
Test starting: deleteClientTester
Description: Tests the DeleteClient. Makes a whole conversation for the delete client for a 'good' scenario.
Step: Initialise the number of pillars to one
Step: Request a file to be deleted on all pillars (which means only the default pillar).
Stimuli: Calling deleteFile(default-test-file.txt, Pillar1, org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@6855bae5[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@6d3e7bd0[checksumType=MD5, checksumSalt=<null>, otherChecksumType=<null>], checksumValue={49,50,51,99,104,101,99,107,115,117,109,51,50,49}, calculationTimestamp=1970-01-01T01:00:00.000+01:00], org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@3d4fad6c[checksumType=SHA1, checksumSalt=<null>, otherChecksumType=<null>], eventHandler, null)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForDeleteFileRequest@1d646e4c[correlationID=977bceb0-458a-44ec-9091-571ee3f14f6b, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-DeleteFileClientComponentTest-cibuild01, from=deleteClientTester, to=Pillar1, version=28, minVersion=24, auditTrailInformation=<null>, fileID=default-test-file.txt]
Result: Received event: 977bceb0: DELETE_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for delete file
Step: Make response for the pillar.
Result: Received event: 977bceb0: DELETE_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar1
Result: Received event: 977bceb0: DELETE_FILE for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: [Pillar1]
Result: Received event: 977bceb0: DELETE_FILE for file default-test-file.txt: REQUEST_SENT: ContributorID [Pillar1], Sending request for deleting file
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.DeleteFileRequest@46dd6da8[correlationID=977bceb0-458a-44ec-9091-571ee3f14f6b, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-DeleteFileClientComponentTest-cibuild01, from=deleteClientTester, to=Pillar1, version=28, minVersion=24, auditTrailInformation=<null>, pillarID=Pillar1, fileID=default-test-file.txt, checksumDataForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@6855bae5[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@6d3e7bd0[checksumType=MD5, checksumSalt=<null>, otherChecksumType=<null>], checksumValue={49,50,51,99,104,101,99,107,115,117,109,51,50,49}, calculationTimestamp=1970-01-01T01:00:00.000+01:00], checksumRequestForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@3d4fad6c[checksumType=SHA1, checksumSalt=<null>, otherChecksumType=<null>]]
Step: Validate the steps of the DeleteClient by going through the events.
Step: The pillar sends a progress response to the DeleteClient.
Result: Received event: 977bceb0: DELETE_FILE for file default-test-file.txt: PROGRESS: ContributorID Pillar1, First test progress response message
Step: Send a final response message to the DeleteClient.
Result: Received event: 977bceb0: DELETE_FILE for file default-test-file.txt: COMPONENT_COMPLETE: ContributorID Pillar1, DeleteFileResult=null
Result: Received event: 977bceb0: DELETE_FILE for file default-test-file.txt: COMPLETE:
Test success: deleteClientTester
Test starting: deleteOnChecksumPillar
Description: Verify that the DeleteClient works correctly when a checksum pillar is present.
Step: Request a file to be deleted on the pillar1.
Stimuli: Calling deleteFile(default-test-file.txt, Pillar1, org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@50dd3bd2[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@15dadf44[checksumType=MD5, checksumSalt=<null>, otherChecksumType=<null>], checksumValue={-108,10,81,-78,80,-25,-86,-126,-40,-24,-22,49,33,127,-14,103}, calculationTimestamp=2015-10-15T02:20:04.901+02:00], null, eventHandler, null)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForDeleteFileRequest@2dae11b4[correlationID=51886039-d6bd-4628-b904-d242d8b71c04, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-DeleteFileClientComponentTest-cibuild01, from=deleteOnChecksumPillar, to=Pillar1, version=28, minVersion=24, auditTrailInformation=<null>, fileID=default-test-file.txt]
Result: Received event: 51886039: DELETE_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for delete file
Step: Send an identification response from pillar2.
Step: Send a response from pillar1 with PillarChecksumSpec element set, indicating that this is a checksum pillar.
Result: Received event: 51886039: DELETE_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar1
Result: Received event: 51886039: DELETE_FILE for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: [Pillar1]
Result: Received event: 51886039: DELETE_FILE for file default-test-file.txt: REQUEST_SENT: ContributorID [Pillar1], Sending request for deleting file
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.DeleteFileRequest@20b167a2[correlationID=51886039-d6bd-4628-b904-d242d8b71c04, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-DeleteFileClientComponentTest-cibuild01, from=deleteOnChecksumPillar, to=Pillar1, version=28, minVersion=24, auditTrailInformation=<null>, pillarID=Pillar1, fileID=default-test-file.txt, checksumDataForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@50dd3bd2[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@15dadf44[checksumType=MD5, checksumSalt=<null>, otherChecksumType=<null>], checksumValue={-108,10,81,-78,80,-25,-86,-126,-40,-24,-22,49,33,127,-14,103}, calculationTimestamp=2015-10-15T02:20:04.901+02:00], checksumRequestForExistingFile=<null>]
Test success: deleteOnChecksumPillar
Test starting: deleteOnChecksumPillarWithDefaultReturnChecksumType
Description: Verify that the DeleteClient works correctly when a return checksum of the default typeis requested.
Step: Request a file to be deleted on the pillar1. The call should include a request for a check sum of the default type
Stimuli: Calling deleteFile(default-test-file.txt, Pillar1, org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@3d8cef0c[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@2b7d8e96[checksumType=MD5, checksumSalt=<null>, otherChecksumType=<null>], checksumValue={-108,10,81,-78,80,-25,-86,-126,-40,-24,-22,49,33,127,-14,103}, calculationTimestamp=2015-10-15T02:20:07.038+02:00], org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@42d7ffe5[checksumType=MD5, checksumSalt=<null>, otherChecksumType=<null>], eventHandler, null)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForDeleteFileRequest@ba380a5[correlationID=2262db33-304c-4b29-931d-2b2c41864f47, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-DeleteFileClientComponentTest-cibuild01, from=deleteOnChecksumPillarWithDefaultReturnChecksumType, to=Pillar1, version=28, minVersion=24, auditTrailInformation=<null>, fileID=default-test-file.txt]
Result: Received event: 2262db33: DELETE_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for delete file
Step: Send a response from pillar1 with PillarChecksumSpec element set, indicating that this is a checksum pillar.
Result: Received event: 2262db33: DELETE_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar1
Result: Received event: 2262db33: DELETE_FILE for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: [Pillar1]
Result: Received event: 2262db33: DELETE_FILE for file default-test-file.txt: REQUEST_SENT: ContributorID [Pillar1], Sending request for deleting file
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.DeleteFileRequest@16c3c7db[correlationID=2262db33-304c-4b29-931d-2b2c41864f47, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-DeleteFileClientComponentTest-cibuild01, from=deleteOnChecksumPillarWithDefaultReturnChecksumType, to=Pillar1, version=28, minVersion=24, auditTrailInformation=<null>, pillarID=Pillar1, fileID=default-test-file.txt, checksumDataForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@3d8cef0c[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@2b7d8e96[checksumType=MD5, checksumSalt=<null>, otherChecksumType=<null>], checksumValue={-108,10,81,-78,80,-25,-86,-126,-40,-24,-22,49,33,127,-14,103}, calculationTimestamp=2015-10-15T02:20:07.038+02:00], checksumRequestForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@42d7ffe5[checksumType=MD5, checksumSalt=<null>, otherChecksumType=<null>]]
Test success: deleteOnChecksumPillarWithDefaultReturnChecksumType
Test starting: deleteOnChecksumPillarWithSaltedReturnChecksumType
Description: Verify that the DeleteClient works correctly when a return checksum with a salt is requested.
Step: Request a file to be deleted on the pillar1. The call should include a request for a salted check sum
Stimuli: Calling deleteFile(default-test-file.txt, Pillar1, org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@4624e79a[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@7e1ee1a5[checksumType=MD5, checksumSalt=<null>, otherChecksumType=<null>], checksumValue={-108,10,81,-78,80,-25,-86,-126,-40,-24,-22,49,33,127,-14,103}, calculationTimestamp=2015-10-15T02:20:07.146+02:00], org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@305a4a7d[checksumType=MD5, checksumSalt={-86}, otherChecksumType=<null>], eventHandler, null)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForDeleteFileRequest@6670ff38[correlationID=5e517c17-38c1-4622-93df-a074f2736037, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-DeleteFileClientComponentTest-cibuild01, from=deleteOnChecksumPillarWithSaltedReturnChecksumType, to=Pillar1, version=28, minVersion=24, auditTrailInformation=<null>, fileID=default-test-file.txt]
Result: Received event: 5e517c17: DELETE_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for delete file
Step: Send a response from pillar1 with PillarChecksumSpec element set, indicating that this is a checksum pillar.
Result: Received event: 5e517c17: DELETE_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar1
Result: Received event: 5e517c17: DELETE_FILE for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: [Pillar1]
Result: Received event: 5e517c17: DELETE_FILE for file default-test-file.txt: REQUEST_SENT: ContributorID [Pillar1], Sending request for deleting file
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.DeleteFileRequest@e1306d6[correlationID=5e517c17-38c1-4622-93df-a074f2736037, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-DeleteFileClientComponentTest-cibuild01, from=deleteOnChecksumPillarWithSaltedReturnChecksumType, to=Pillar1, version=28, minVersion=24, auditTrailInformation=<null>, pillarID=Pillar1, fileID=default-test-file.txt, checksumDataForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@4624e79a[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@7e1ee1a5[checksumType=MD5, checksumSalt=<null>, otherChecksumType=<null>], checksumValue={-108,10,81,-78,80,-25,-86,-126,-40,-24,-22,49,33,127,-14,103}, calculationTimestamp=2015-10-15T02:20:07.146+02:00], checksumRequestForExistingFile=<null>]
Test success: deleteOnChecksumPillarWithSaltedReturnChecksumType
Test starting: fileAlreadyDeletedFromPillar
Description: Test that a delete on a pillar completes successfully when the file is missing (has already been deleted). This is a test of the Idempotent behaviour of the delete client
Step: Request a file to be deleted on pillar1.
Stimuli: Calling deleteFile(default-test-file.txt, Pillar1, org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@10bf7e8e[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@5a1927f6[checksumType=MD5, checksumSalt=<null>, otherChecksumType=<null>], checksumValue={-108,10,81,-78,80,-25,-86,-126,-40,-24,-22,49,33,127,-14,103}, calculationTimestamp=2015-10-15T02:20:07.328+02:00], null, eventHandler, null)
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForDeleteFileRequest@3d4e5eb[correlationID=bc871db6-976b-48de-9e10-83848a6fb350, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-DeleteFileClientComponentTest-cibuild01, from=fileAlreadyDeletedFromPillar, to=Pillar1, version=28, minVersion=24, auditTrailInformation=<null>, fileID=default-test-file.txt]
Result: Received event: bc871db6: DELETE_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for delete file
Step: Send a identify response from Pillar1 with a missing file response.
Result: Received event: bc871db6: DELETE_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar1
Result: Received event: bc871db6: DELETE_FILE for file default-test-file.txt: COMPONENT_COMPLETE: ContributorID Pillar1, DeleteFileResult=null
Result: Received event: bc871db6: DELETE_FILE for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: []
Result: Received event: bc871db6: DELETE_FILE for file default-test-file.txt: COMPLETE:
Step: The client should then continue to the performing phase and finish immediately as the pillar has already had the file removed apparently .
Step: Send a identify response from Pillar2
Test success: fileAlreadyDeletedFromPillar
Test starting: verifyDeleteClientFromFactory
Description: Testing the initialization through the ModifyComponentFactory.
Step: Use the ModifyComponentFactory to instantiate a PutFileClient.
Test success: verifyDeleteClientFromFactory
Starting testcase ReplaceFileClientComponentTest
Test starting: replaceClientIdentificationTimeout
Description: Tests the handling of a failed identification for the ReplaceClient
Step: Initialise the number of pillars and the DeleteClient. Sets the identification timeout to 100 ms.
Step: Request a file to be replaced on the default pillar.
Stimuli: replaceFile(default-test-file.txt, Pillar1, org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@653adef5[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@18d76f8d[checksumType=MD5, checksumSalt=<null>, otherChecksumType=<null>], checksumValue={49,50,51,99,104,101,99,107,115,117,109,51,50,49}, calculationTimestamp=1970-01-01T01:00:00.000+01:00], org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@8a51c4e[checksumType=SHA1, checksumSalt=<null>, otherChecksumType=<null>], file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, 10, org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@487f767e[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@18d76f8d[checksumType=MD5, checksumSalt=<null>, otherChecksumType=<null>], checksumValue={49,50,51,99,104,101,99,107,115,117,109,51,50,49}, calculationTimestamp=1970-01-01T01:00:00.000+01:00], org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@8a51c4e[checksumType=SHA1, checksumSalt=<null>, otherChecksumType=<null>], org.bitrepository.client.TestEventHandler@7b81d4f2, null
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForReplaceFileRequest@58096708[correlationID=83c1623c-28c4-4c3b-8c93-25a3ca626625, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-ReplaceFileClientComponentTest-cibuild01, from=replaceClientIdentificationTimeout, to=Pillar1, version=28, minVersion=24, auditTrailInformation=<null>, fileID=default-test-file.txt, fileSize=<null>]
Result: Received event: 83c1623c: REPLACE_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for replace file
Step: Do not respond. Just await the timeout.
Result: Received event: 83c1623c: REPLACE_FILE for file default-test-file.txt: IDENTIFY_TIMEOUT: , Time has run out for looking up contributors
The following contributors didn't respond: [Pillar1]
Result: Received event: 83c1623c: REPLACE_FILE for file default-test-file.txt: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: null, Timeout for identifying contributor
Result: Received event: 83c1623c: REPLACE_FILE for file default-test-file.txt: FAILED: , Unable to continue operation, contributors unavailable.
Test success: replaceClientIdentificationTimeout
Test starting: replaceClientOperationTimeout
Description: Tests the handling of a failed operation for the ReplaceClient
Step: Initialise the number of pillars and the DeleteClient. Sets the operation timeout to 100 ms.
Step: Request a file to be replaced on the default pillar.
Stimuli: replaceFile(default-test-file.txt, Pillar1, org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@3078c800[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@3ea04bda[checksumType=MD5, checksumSalt=<null>, otherChecksumType=<null>], checksumValue={49,50,51,99,104,101,99,107,115,117,109,51,50,49}, calculationTimestamp=1970-01-01T01:00:00.000+01:00], org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@321e503[checksumType=SHA1, checksumSalt=<null>, otherChecksumType=<null>], file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, 10, org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@5c72ea80[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@3ea04bda[checksumType=MD5, checksumSalt=<null>, otherChecksumType=<null>], checksumValue={49,50,51,99,104,101,99,107,115,117,109,51,50,49}, calculationTimestamp=1970-01-01T01:00:00.000+01:00], org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@321e503[checksumType=SHA1, checksumSalt=<null>, otherChecksumType=<null>], org.bitrepository.client.TestEventHandler@2abc01c6, null
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForReplaceFileRequest@167e61d0[correlationID=a8884d12-0229-4968-9521-ef5c3221ed4c, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-ReplaceFileClientComponentTest-cibuild01, from=replaceClientOperationTimeout, to=Pillar1, version=28, minVersion=24, auditTrailInformation=<null>, fileID=default-test-file.txt, fileSize=<null>]
Result: Received event: a8884d12: REPLACE_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for replace file
Step: Make response for the pillar.
Result: Received event: a8884d12: REPLACE_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar1
Result: Received event: a8884d12: REPLACE_FILE for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: [Pillar1]
Result: Received event: a8884d12: REPLACE_FILE for file default-test-file.txt: REQUEST_SENT: ContributorID [Pillar1], Sending request for replace file
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.ReplaceFileRequest@511658c4[correlationID=a8884d12-0229-4968-9521-ef5c3221ed4c, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-ReplaceFileClientComponentTest-cibuild01, from=replaceClientOperationTimeout, to=Pillar1, version=28, minVersion=24, auditTrailInformation=<null>, pillarID=Pillar1, fileID=default-test-file.txt, checksumDataForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@3078c800[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@3ea04bda[checksumType=MD5, checksumSalt=<null>, otherChecksumType=<null>], checksumValue={49,50,51,99,104,101,99,107,115,117,109,51,50,49}, calculationTimestamp=1970-01-01T01:00:00.000+01:00], checksumRequestForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@321e503[checksumType=SHA1, checksumSalt=<null>, otherChecksumType=<null>], fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, fileSize=10, checksumDataForNewFile=org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@5c72ea80[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@3ea04bda[checksumType=MD5, checksumSalt=<null>, otherChecksumType=<null>], checksumValue={49,50,51,99,104,101,99,107,115,117,109,51,50,49}, calculationTimestamp=1970-01-01T01:00:00.000+01:00], checksumRequestForNewFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@321e503[checksumType=SHA1, checksumSalt=<null>, otherChecksumType=<null>]]
Step: Validate the steps of the ReplaceClient by going through the events.
Step: Do not respond. Just await the timeout.
Result: Received event: a8884d12: REPLACE_FILE for file default-test-file.txt: FAILED: , Failed to receive responses from all contributors before timeout(100ms). Missing contributors [Pillar1]
Test success: replaceClientOperationTimeout
Test starting: replaceClientPillarFailed
Description: Tests the handling of a operation failure for the ReplaceClient.
Step: Initialise the number of pillars to one
Step: Request a file to be replaced on the default pillar.
Stimuli: replaceFile(default-test-file.txt, Pillar1, org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@59546b04[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@17db0fad[checksumType=MD5, checksumSalt=<null>, otherChecksumType=<null>], checksumValue={49,50,51,99,104,101,99,107,115,117,109,51,50,49}, calculationTimestamp=1970-01-01T01:00:00.000+01:00], org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@705bd68c[checksumType=SHA1, checksumSalt=<null>, otherChecksumType=<null>], file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, 0, org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@41d71bec[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@17db0fad[checksumType=MD5, checksumSalt=<null>, otherChecksumType=<null>], checksumValue={49,50,51,99,104,101,99,107,115,117,109,51,50,49}, calculationTimestamp=1970-01-01T01:00:00.000+01:00], org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@705bd68c[checksumType=SHA1, checksumSalt=<null>, otherChecksumType=<null>], org.bitrepository.client.TestEventHandler@3ba15499, null
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForReplaceFileRequest@74c89227[correlationID=24d474b3-0c20-495e-8eb5-8550b4835c5e, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-ReplaceFileClientComponentTest-cibuild01, from=replaceClientPillarFailed, to=Pillar1, version=28, minVersion=24, auditTrailInformation=<null>, fileID=default-test-file.txt, fileSize=<null>]
Result: Received event: 24d474b3: REPLACE_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for replace file
Step: Make response for the pillar.
Result: Received event: 24d474b3: REPLACE_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar1
Result: Received event: 24d474b3: REPLACE_FILE for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: [Pillar1]
Result: Received event: 24d474b3: REPLACE_FILE for file default-test-file.txt: REQUEST_SENT: ContributorID [Pillar1], Sending request for replace file
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.ReplaceFileRequest@2378ad42[correlationID=24d474b3-0c20-495e-8eb5-8550b4835c5e, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-ReplaceFileClientComponentTest-cibuild01, from=replaceClientPillarFailed, to=Pillar1, version=28, minVersion=24, auditTrailInformation=<null>, pillarID=Pillar1, fileID=default-test-file.txt, checksumDataForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@59546b04[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@17db0fad[checksumType=MD5, checksumSalt=<null>, otherChecksumType=<null>], checksumValue={49,50,51,99,104,101,99,107,115,117,109,51,50,49}, calculationTimestamp=1970-01-01T01:00:00.000+01:00], checksumRequestForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@705bd68c[checksumType=SHA1, checksumSalt=<null>, otherChecksumType=<null>], fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, fileSize=0, checksumDataForNewFile=org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@41d71bec[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@17db0fad[checksumType=MD5, checksumSalt=<null>, otherChecksumType=<null>], checksumValue={49,50,51,99,104,101,99,107,115,117,109,51,50,49}, calculationTimestamp=1970-01-01T01:00:00.000+01:00], checksumRequestForNewFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@705bd68c[checksumType=SHA1, checksumSalt=<null>, otherChecksumType=<null>]]
Step: Validate the steps of the ReplaceClient by going through the events.
Step: Send a failed response message to the ReplaceClient.
Result: Received event: 24d474b3: REPLACE_FILE for file default-test-file.txt: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: FAILURE, Verifying that a failure can be understood!
Result: Received event: 24d474b3: REPLACE_FILE for file default-test-file.txt: FAILED: , Failed operation. Cause(s):
[24d474b3: REPLACE_FILE for file default-test-file.txt: COMPONENT_FAILED: ContributorID Pillar1 ResponseCode: FAILURE, Verifying that a failure can be understood!]
Test success: replaceClientPillarFailed
Test starting: replaceClientTester
Description: Tests the ReplaceFileClient. Makes a whole conversation for the replace client for a 'good' scenario.
Step: Initialise the number of pillars to one
Step: Request a file to be replaced on all pillars (which means only the default pillar).
Stimuli: replaceFile(default-test-file.txt, Pillar1, org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@71721588[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@2b4e8d08[checksumType=MD5, checksumSalt=<null>, otherChecksumType=<null>], checksumValue={49,50,51,99,104,101,99,107,115,117,109,51,50,49}, calculationTimestamp=1970-01-01T01:00:00.000+01:00], org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@398cf908[checksumType=SHA1, checksumSalt=<null>, otherChecksumType=<null>], file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, 10, org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@6b378dea[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@2b4e8d08[checksumType=MD5, checksumSalt=<null>, otherChecksumType=<null>], checksumValue={49,50,51,99,104,101,99,107,115,117,109,51,50,49}, calculationTimestamp=1970-01-01T01:00:00.000+01:00], org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@398cf908[checksumType=SHA1, checksumSalt=<null>, otherChecksumType=<null>], org.bitrepository.client.TestEventHandler@a080b51, null
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForReplaceFileRequest@55f1f1d5[correlationID=f4c10f81-0f4b-4fb5-a3cc-23e6f37455d0, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-ReplaceFileClientComponentTest-cibuild01, from=replaceClientTester, to=Pillar1, version=28, minVersion=24, auditTrailInformation=<null>, fileID=default-test-file.txt, fileSize=<null>]
Result: Received event: f4c10f81: REPLACE_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for replace file
Step: Make response for the pillar.
Result: Received event: f4c10f81: REPLACE_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar1
Result: Received event: f4c10f81: REPLACE_FILE for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: [Pillar1]
Result: Received event: f4c10f81: REPLACE_FILE for file default-test-file.txt: REQUEST_SENT: ContributorID [Pillar1], Sending request for replace file
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.ReplaceFileRequest@5ce49280[correlationID=f4c10f81-0f4b-4fb5-a3cc-23e6f37455d0, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-ReplaceFileClientComponentTest-cibuild01, from=replaceClientTester, to=Pillar1, version=28, minVersion=24, auditTrailInformation=<null>, pillarID=Pillar1, fileID=default-test-file.txt, checksumDataForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@71721588[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@2b4e8d08[checksumType=MD5, checksumSalt=<null>, otherChecksumType=<null>], checksumValue={49,50,51,99,104,101,99,107,115,117,109,51,50,49}, calculationTimestamp=1970-01-01T01:00:00.000+01:00], checksumRequestForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@398cf908[checksumType=SHA1, checksumSalt=<null>, otherChecksumType=<null>], fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, fileSize=10, checksumDataForNewFile=org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@6b378dea[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@2b4e8d08[checksumType=MD5, checksumSalt=<null>, otherChecksumType=<null>], checksumValue={49,50,51,99,104,101,99,107,115,117,109,51,50,49}, calculationTimestamp=1970-01-01T01:00:00.000+01:00], checksumRequestForNewFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@398cf908[checksumType=SHA1, checksumSalt=<null>, otherChecksumType=<null>]]
Step: Validate the steps of the ReplaceClient by going through the events.
Step: The pillar sends a progress response to the ReplaceClient.
Result: Received event: f4c10f81: REPLACE_FILE for file default-test-file.txt: PROGRESS: ContributorID Pillar1, First test progress response message
Step: Send a final response message to the ReplaceClient.
Result: Received event: f4c10f81: REPLACE_FILE for file default-test-file.txt: COMPONENT_COMPLETE: ContributorID Pillar1, checksum for new file: 'org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@6b378dea[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@2b4e8d08[checksumType=MD5, checksumSalt=<null>, otherChecksumType=<null>], checksumValue={49,50,51,99,104,101,99,107,115,117,109,51,50,49}, calculationTimestamp=1970-01-01T01:00:00.000+01:00]',checksum for replaced file: 'null'
Result: Received event: f4c10f81: REPLACE_FILE for file default-test-file.txt: COMPLETE:
Test success: replaceClientTester
Test starting: saltedReturnChecksumsForNewFileWithChecksumPillar
Description: Tests that the ReplaceClient handles the presence of a ChecksumPillar correctly, when a salted return checksum (which a checksum pillar can't provide) is requested for the new file.
Step: Call replaceFile while requesting a salted checksum to be returned.
Stimuli: replaceFile(default-test-file.txt, Pillar1, org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@3d64b103[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@c23f6cd[checksumType=MD5, checksumSalt=<null>, otherChecksumType=<null>], checksumValue={49,50,51,99,104,101,99,107,115,117,109,51,50,49}, calculationTimestamp=1970-01-01T01:00:00.000+01:00], null, file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, 0, org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@6fd717ad[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@c23f6cd[checksumType=MD5, checksumSalt=<null>, otherChecksumType=<null>], checksumValue={49,50,51,99,104,101,99,107,115,117,109,51,50,49}, calculationTimestamp=1970-01-01T01:00:00.000+01:00], org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@1580163d[checksumType=MD5, checksumSalt={-86}, otherChecksumType=<null>], org.bitrepository.client.TestEventHandler@d744127, null
Result: Received message on TEST-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForReplaceFileRequest@1ef25bda[correlationID=015e1ca8-d75b-40e0-81af-c89f4c0896d4, collectionID=TwoPillarCollection, destination=TEST-TOPIC-cibuild01, replyTo=TEST-TOPIC-ReplaceFileClientComponentTest-cibuild01, from=saltedReturnChecksumsForNewFileWithChecksumPillar, to=Pillar1, version=28, minVersion=24, auditTrailInformation=<null>, fileID=default-test-file.txt, fileSize=<null>]
Result: Received event: 015e1ca8: REPLACE_FILE for file default-test-file.txt: IDENTIFY_REQUEST_SENT: , Identifying pillars for replace file
Step: Send an identification response with a PillarChecksumSpec element set, indicating that this is a checksum pillar.
Result: Received event: 015e1ca8: REPLACE_FILE for file default-test-file.txt: COMPONENT_IDENTIFIED: ContributorID Pillar1
Result: Received event: 015e1ca8: REPLACE_FILE for file default-test-file.txt: IDENTIFICATION_COMPLETE: Contributors: [Pillar1]
Result: Received event: 015e1ca8: REPLACE_FILE for file default-test-file.txt: REQUEST_SENT: ContributorID [Pillar1], Sending request for replace file
Result: Received message on Pillar1_topic-cibuild01 : org.bitrepository.bitrepositorymessages.ReplaceFileRequest@5c6b8b2c[correlationID=015e1ca8-d75b-40e0-81af-c89f4c0896d4, collectionID=TwoPillarCollection, destination=Pillar1_topic-cibuild01, replyTo=TEST-TOPIC-ReplaceFileClientComponentTest-cibuild01, from=saltedReturnChecksumsForNewFileWithChecksumPillar, to=Pillar1, version=28, minVersion=24, auditTrailInformation=<null>, pillarID=Pillar1, fileID=default-test-file.txt, checksumDataForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@3d64b103[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@c23f6cd[checksumType=MD5, checksumSalt=<null>, otherChecksumType=<null>], checksumValue={49,50,51,99,104,101,99,107,115,117,109,51,50,49}, calculationTimestamp=1970-01-01T01:00:00.000+01:00], checksumRequestForExistingFile=<null>, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, fileSize=0, checksumDataForNewFile=org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@6fd717ad[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@c23f6cd[checksumType=MD5, checksumSalt=<null>, otherChecksumType=<null>], checksumValue={49,50,51,99,104,101,99,107,115,117,109,51,50,49}, calculationTimestamp=1970-01-01T01:00:00.000+01:00], checksumRequestForNewFile=<null>]
Test success: saltedReturnChecksumsForNewFileWithChecksumPillar
Test starting: verifyReplaceFileClientFromFactory
Description: Testing the initialization through the ModifyComponentFactory.
Step: Use the ModifyComponentFactory to instantiate a ReplaceFileClient.
Test success: verifyReplaceFileClientFromFactory
Starting testcase UnexpectedResponseExceptionTest
Test starting: testUnexpectedResponse
Description: Test the instantiation of the exception
Step: Setup
Step: Try to throw such an exception
Step: Throw the exception with an embedded exception
Test success: testUnexpectedResponse
Finished testcase
Finished suite
Finished project
Tests run: 156, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 67.817 sec - in TestSuite
Results :
Tests run: 156, Failures: 0, Errors: 0, Skipped: 0
[JENKINS] Recording test results
[INFO]
[INFO] --- maven-jar-plugin:2.4:jar (default-jar) @ bitrepository-client ---
[INFO] Building jar: /home/cibuild01/workspace/Bitrepository-sonar/bitrepository-client/target/bitrepository-client-1.6-SNAPSHOT.jar
[INFO]
[INFO] --- maven-jar-plugin:2.4:test-jar (default) @ bitrepository-client ---
[INFO] Building jar: /home/cibuild01/workspace/Bitrepository-sonar/bitrepository-client/target/bitrepository-client-1.6-SNAPSHOT-tests.jar
[INFO]
[INFO] --- maven-source-plugin:2.2.1:jar-no-fork (attach-sources-no-fork) @ bitrepository-client ---
[INFO] Building jar: /home/cibuild01/workspace/Bitrepository-sonar/bitrepository-client/target/bitrepository-client-1.6-SNAPSHOT-sources.jar
[INFO]
[INFO] --- maven-assembly-plugin:2.4:single (make-assembly) @ bitrepository-client ---
[INFO] Reading assembly descriptor: src/main/assembly/assembly.xml
[JENKINS] Archiving disabled
[INFO] Building tar: /home/cibuild01/workspace/Bitrepository-sonar/bitrepository-client/target/bitrepository-client-1.6-SNAPSHOT-distribution.tar.gz
[INFO]
[INFO] --- maven-install-plugin:2.5.1:install (default-install) @ bitrepository-client ---
[INFO] Installing /home/cibuild01/workspace/Bitrepository-sonar/bitrepository-client/target/bitrepository-client-1.6-SNAPSHOT.jar to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-client/1.6-SNAPSHOT/bitrepository-client-1.6-SNAPSHOT.jar
[INFO] Installing /home/cibuild01/workspace/Bitrepository-sonar/bitrepository-client/pom.xml to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-client/1.6-SNAPSHOT/bitrepository-client-1.6-SNAPSHOT.pom
[INFO] Installing /home/cibuild01/workspace/Bitrepository-sonar/bitrepository-client/target/bitrepository-client-1.6-SNAPSHOT-tests.jar to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-client/1.6-SNAPSHOT/bitrepository-client-1.6-SNAPSHOT-tests.jar
[INFO] Installing /home/cibuild01/workspace/Bitrepository-sonar/bitrepository-client/target/bitrepository-client-1.6-SNAPSHOT-sources.jar to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-client/1.6-SNAPSHOT/bitrepository-client-1.6-SNAPSHOT-sources.jar
[INFO] Installing /home/cibuild01/workspace/Bitrepository-sonar/bitrepository-client/target/bitrepository-client-1.6-SNAPSHOT-distribution.tar.gz to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-client/1.6-SNAPSHOT/bitrepository-client-1.6-SNAPSHOT-distribution.tar.gz
Console Output
Help us localize this page