SuccessConsole Output

Skipping 555 KB.. Full Log
eletion
      Test starting: testExtractionOfMissingData
        Description: Test the handling of bad arguments.
        Step: Try to get the date of a wrong file id.
        Step: Try to get the date of a wrong file id.
        Step: Try to remove a bad file id
      Test success: testExtractionOfMissingData
      Test starting: testGetChecksumResult
        Description: Tests the restrictions on the GetChecksumResult call to the database.
        Step: Instantiate database with appropriate data.
        Step: Test with no time restrictions
        Step: Test with time restrictions from epoc to now
        Step: Test with very strict time restrictions around the default date
        Step: Test with too new a lower limit
        Step: Test with exact date as both upper and lower limit
        Step: Test with date limit from 1 millis before as lower and exact date a upper limit
        Step: Test with date limit from exact date as lower and 1 millis after date a upper limit
        Step: Test with too old an upper limit
      Test success: testGetChecksumResult
      Test starting: testGetFileIDsRestrictions
        Description: Tests the restrictions on the GetFileIDs call to the database.
        Step: Instantiate database with appropriate data.
        Step: Test with no time restrictions and 10000 max_results
        Step: Test with minimum-date earlier than first file
        Step: Test with maximum-date earlier than first file
        Step: Test with minimum-date set to later than second file.
        Step: Test with maximum-date set to later than second file.
        Step: Test with minimum-date set to middle date.
        Step: Test with maximum-date set to middle date.
        Step: Test with both minimum-date and maximum-date set to middle date.
        Step: Test the first file-id, with no other restrictions
        Step: Test the second file-id, with no other restrictions
        Step: Test the date for the first file-id, while requesting the second file-id
      Test success: testGetFileIDsRestrictions
      Test starting: testGetFileIDsWithOldChecksums
        Description: Tests the restrictions on the GetFileIDsWithOldChecksums call to the database.
        Step: Instantiate database with appropriate data.
        Step: Extract all entries with checksum date older than now
        Step: Extract all entries with checksum date older than epoch
        Step: Extract all entries with checksum date older than middle date
      Test success: testGetFileIDsWithOldChecksums
      Test starting: testReplacingExistingEntry
        Description: Test that an entry can be replaced by another in the database.
        Step: Check whether the default entry exists.
        Step: Replace the checksum and date
      Test success: testReplacingExistingEntry
      Test starting: testSpecifiedEntryExtraction
        Description: Test that specific entries can be extracted. Has two entries in the database: one for the current timestamp and one for the epoch.
        Step: Instantiate database with appropriate data.
        Step: Extract with out restrictions
        Step: Extract with a maximum of 1 entry
        Step: Extract all dates older than this tests instantiation
        Step: Extract all dates newer than this tests instantiation
        Step: Extract all dates older than the newest instance
        Step: Extract all dates newer than the oldest instantiation
      Test success: testSpecifiedEntryExtraction
    Starting testcase ChecksumPillarModelTest
      Test starting: testPillarModelBasicFunctionality
        Description: Test the basic functions of the full reference pillar model.
        Step: Check the pillar id in the pillar model
        Step: Ask whether it can handle a file of size 0
        Step: Ask whether it can handle a file of maximum size
        Step: Check the ChecksumPillarSpec
        Step: Checkum whether the checksum pillar should download
      Test success: testPillarModelBasicFunctionality
      Test starting: testPillarModelHasFile
        Description: Test that the file exists, when placed in the archive and cache
        Step: Setup
        Step: Check whether file exists and retrieve it.
        Step: Check whether file exists.
        Step: Ask for the checksum data for the file with different checksum specs
        Step: Ask for the checksum entry for the file with different checksum specs
        Step: Ask for the checksum for the file with different checksum specs
        Step: Check extraction of checksum result set
        Step: Check retrieval of non-default checksum
        Step: Check retrieval of non-default checksum result set
        Step: Test retrieval of single checksum result set
      Test success: testPillarModelHasFile
      Test starting: testPillarModelNoFile
        Description: Test that the file exists, when placed in the archive and cache
        Step: Setup
        Step: Check whether file exists and try to retrieve it.
        Step: Verify that anexceptions are thrown when verifying file existance.
      Test success: testPillarModelNoFile
    Starting testcase GetFileTest
        Added fixture: Initialize a new Pillar.
      Test starting: badCaseIdentification
        Description: Tests the identification for a GetFile operation on the checksum pillar for the failure scenario, when the file is missing.
        Step: Set up constants and variables.
        Step: Setup for throwing an exception when asked to verify file existence
        Step: Create and send the identify request message.
          Result: Received message on TEST-TOPIC-badCaseIdentification-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForGetFileResponse@5c7f8c9f[correlationID=6cdb9ead-375b-46df-a7da-7d9bbe2c9b26, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseIdentification-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseIdentification-cibuild01-contributor, from=Pillar-badCaseIdentification, to=badCaseIdentification, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@2ce33999[responseCode=FILE_NOT_FOUND_FAILURE, responseText=File not found.], fileID=DefaultFilebadCaseIdentification, pillarID=Pillar-badCaseIdentification, timeToDeliver=<null>(default)]
        Step: Retrieve and validate the response getPillarID() the pillar.
      Test success: badCaseIdentification
        Added fixture: Initialize a new Pillar.
      Test starting: goodCaseIdentification
        Description: Tests the identification for a GetFile operation on the pillar for the successful scenario.
        Step: Set up constants and variables.
        Step: Setup for having the file and delivering pillar id
        Step: Create and send the identify request message.
          Result: Received message on TEST-TOPIC-goodCaseIdentification-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForGetFileResponse@771e08ed[correlationID=f757db8f-4917-4c9e-9da0-bd0e31168d76, collectionID=TwoPillarCollection, destination=TEST-TOPIC-goodCaseIdentification-cibuild01, replyTo=TEST-TOPIC-Pillar-goodCaseIdentification-cibuild01-contributor, from=Pillar-goodCaseIdentification, to=goodCaseIdentification, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@2ea8611b[responseCode=IDENTIFICATION_POSITIVE, responseText=Operation acknowledged and accepted.], fileID=DefaultFilegoodCaseIdentification, pillarID=Pillar-goodCaseIdentification, timeToDeliver=org.bitrepository.bitrepositoryelements.TimeMeasureTYPE@298550b4[timeMeasureUnit=MILLISECONDS, timeMeasureValue=1000]]
        Step: Retrieve and validate the response getPillarID() the pillar.
      Test success: goodCaseIdentification
    Starting testcase ReferenceArchiveTest
        Added fixture: Initialize the Reference pillar cache with an empty file in default collection TwoPillarCollection
      Test starting: testReferenceArchive
        Description: Test the ReferenceArchive.
        Step: Setup
        Step: test 'hasFile'
        Step: Test 'getFile'
        Step: Test getAllFileIDs
        Step: Test 'getFileAsInputstream'
        Step: Delete, recreate and delete again
        Step: Try to delete missing file.
        Step: Replace a file, which does not exist in the filedir.
        Step: Copy a file into the tmpDir and then use replace.
        Step: Try performing the replace, when the file in the tempdir has been removed.
      Test success: testReferenceArchive
    Starting testcase ReplaceFileTest
        Added fixture: Initialize a new Pillar.
      Test starting: badCaseIdentification
        Description: Tests the identification for a ReplaceFile operation on the pillar for the failure scenario, when the file does not exist.
        Step: Set up constants and variables.
        Step: Setup for not having the file and delivering pillar id
        Step: Create and send the identify request message.
          Result: Received message on TEST-TOPIC-badCaseIdentification-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForReplaceFileResponse@79f05331[correlationID=421a8653-f22f-4475-a258-39beb487c713, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseIdentification-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseIdentification-cibuild01-contributor, from=Pillar-badCaseIdentification, to=badCaseIdentification, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@4b3f178f[responseCode=FILE_NOT_FOUND_FAILURE, responseText=Could not find the requested file to delete.], fileID=DefaultFile, pillarID=Pillar-badCaseIdentification, pillarChecksumSpec=<null>(default), timeToDeliver=<null>(default)]
        Step: Retrieve and validate the response getPillarID() the pillar.
      Test success: badCaseIdentification
        Added fixture: Initialize a new Pillar.
      Test starting: badCaseOperationMissingFile
        Description: Tests the ReplaceFile operation on the pillar for the failure scenario, when the file is missing.
        Step: Set up constants and variables.
        Step: Setup for not having the file and delivering pillar id
        Step: Create and send the identify request message.
          Result: Received message on TEST-TOPIC-badCaseOperationMissingFile-cibuild01 : org.bitrepository.bitrepositorymessages.ReplaceFileFinalResponse@122dc222[correlationID=e20194cc-e911-4520-b894-de0dbdb9a91e, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseOperationMissingFile-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationMissingFile-cibuild01-contributor, from=Pillar-badCaseOperationMissingFile, to=badCaseOperationMissingFile, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@1e06006f[responseCode=FILE_NOT_FOUND_FAILURE, responseText=The file 'DefaultFile' has been requested, but we do not have that file!], pillarID=Pillar-badCaseOperationMissingFile, pillarChecksumSpec=<null>(default), fileID=DefaultFile, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, checksumDataForExistingFile=<null>(default), checksumDataForNewFile=<null>(default)]
        Step: Retrieve the FinalResponse for the ReplaceFile request
      Test success: badCaseOperationMissingFile
        Added fixture: Initialize a new Pillar.
      Test starting: badCaseOperationNoDestructiveChecksum
        Description: Tests the ReplaceFile operation on the pillar for the failure scenario, when no validation checksum is given for the destructive action, but though is required.
        Step: Set up constants and variables.
        Step: Setup for having the file and delivering pillar id
        Step: Create and send the identify request message.
          Result: Received message on TEST-TOPIC-badCaseOperationNoDestructiveChecksum-cibuild01 : org.bitrepository.bitrepositorymessages.ReplaceFileFinalResponse@6777bc90[correlationID=d55aea0f-8278-4418-bc69-786acff4dd56, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseOperationNoDestructiveChecksum-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationNoDestructiveChecksum-cibuild01-contributor, from=Pillar-badCaseOperationNoDestructiveChecksum, to=badCaseOperationNoDestructiveChecksum, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@3a843387[responseCode=EXISTING_FILE_CHECKSUM_FAILURE, responseText=According to the contract a checksum for file to be deleted during the replacing operation is required.], pillarID=Pillar-badCaseOperationNoDestructiveChecksum, pillarChecksumSpec=<null>(default), fileID=DefaultFile, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, checksumDataForExistingFile=<null>(default), checksumDataForNewFile=<null>(default)]
16:12:03.792 WARN  o.b.p.common.PillarAlarmDispatcher - Sending alarm: org.bitrepository.bitrepositoryelements.Alarm@ca0ccb6[origDateTime=2017-03-02T16:12:03.787+01:00, alarmCode=CHECKSUM_ALARM, alarmRaiser=Pillar-badCaseOperationNoDestructiveChecksum, alarmText=According to the contract a checksum for file to be deleted during the replacing operation is required., fileID=DefaultFile, collectionID=TwoPillarCollection]
          Result: Received message on TEST-ALARM-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.AlarmMessage@7de9d7c7[correlationID=7ebe1e54-2773-4293-a856-b45dda753352, collectionID=TwoPillarCollection, destination=TEST-ALARM-TOPIC-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationNoDestructiveChecksum-cibuild01-contributor, from=Pillar-badCaseOperationNoDestructiveChecksum, to=<null>(default), version=30, minVersion=24, alarm=org.bitrepository.bitrepositoryelements.Alarm@ca0ccb6[origDateTime=2017-03-02T16:12:03.787+01:00, alarmCode=CHECKSUM_ALARM, alarmRaiser=Pillar-badCaseOperationNoDestructiveChecksum, alarmText=According to the contract a checksum for file to be deleted during the replacing operation is required., fileID=DefaultFile, collectionID=TwoPillarCollection]]
        Step: Retrieve the FinalResponse for the ReplaceFile request
        Step: Pillar should have sent an alarm
      Test success: badCaseOperationNoDestructiveChecksum
        Added fixture: Initialize a new Pillar.
      Test starting: badCaseOperationNoValidationChecksum
        Description: Tests the ReplaceFile operation on the pillar for the failure scenario, when no validation checksum is given for the new file, but though is required.
        Step: Set up constants and variables.
        Step: Setup for having the file and delivering pillar id
        Step: Create and send the identify request message.
          Result: Received message on TEST-TOPIC-badCaseOperationNoValidationChecksum-cibuild01 : org.bitrepository.bitrepositorymessages.ReplaceFileFinalResponse@7b09274[correlationID=eac34d6f-a98a-4c2c-8eff-7db9afe33b79, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseOperationNoValidationChecksum-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationNoValidationChecksum-cibuild01-contributor, from=Pillar-badCaseOperationNoValidationChecksum, to=badCaseOperationNoValidationChecksum, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@435b1b38[responseCode=NEW_FILE_CHECKSUM_FAILURE, responseText=According to the contract a checksum for new file in the replacing operation is required.], pillarID=Pillar-badCaseOperationNoValidationChecksum, pillarChecksumSpec=<null>(default), fileID=DefaultFile, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, checksumDataForExistingFile=<null>(default), checksumDataForNewFile=<null>(default)]
16:12:04.369 WARN  o.b.p.common.PillarAlarmDispatcher - Sending alarm: org.bitrepository.bitrepositoryelements.Alarm@291853ab[origDateTime=2017-03-02T16:12:04.364+01:00, alarmCode=CHECKSUM_ALARM, alarmRaiser=Pillar-badCaseOperationNoValidationChecksum, alarmText=According to the contract a checksum for new file in the replacing operation is required., fileID=DefaultFile, collectionID=TwoPillarCollection]
          Result: Received message on TEST-ALARM-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.AlarmMessage@2abbc8ae[correlationID=542ab7f7-9902-4471-86ac-3baca01c0701, collectionID=TwoPillarCollection, destination=TEST-ALARM-TOPIC-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationNoValidationChecksum-cibuild01-contributor, from=Pillar-badCaseOperationNoValidationChecksum, to=<null>(default), version=30, minVersion=24, alarm=org.bitrepository.bitrepositoryelements.Alarm@291853ab[origDateTime=2017-03-02T16:12:04.364+01:00, alarmCode=CHECKSUM_ALARM, alarmRaiser=Pillar-badCaseOperationNoValidationChecksum, alarmText=According to the contract a checksum for new file in the replacing operation is required., fileID=DefaultFile, collectionID=TwoPillarCollection]]
        Step: Retrieve the FinalResponse for the ReplaceFile request
        Step: Pillar should have sent an alarm
      Test success: badCaseOperationNoValidationChecksum
        Added fixture: Initialize a new Pillar.
      Test starting: badCaseOperationWrongDestructiveChecksum
        Description: Tests the ReplaceFile operation on the pillar for the failure scenario, when the checksum for the destructive action is different from the one in the cache.
        Step: Set up constants and variables.
        Step: Setup for having the file and delivering pillar id
        Step: Create and send the identify request message.
16:12:04.872 WARN  o.b.p.m.ReplaceFileRequestHandler - Failed to handle replace operation on file 'DefaultFile' since the request had the checksum '1234cccccccc4321' where our local file has the value '1234cccccccc4322'. Sending alarm and respond failure.
          Result: Received message on TEST-TOPIC-badCaseOperationWrongDestructiveChecksum-cibuild01 : org.bitrepository.bitrepositorymessages.ReplaceFileFinalResponse@3d6f45da[correlationID=02a7d186-cb4e-4e33-b459-9d43950ee9a4, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseOperationWrongDestructiveChecksum-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationWrongDestructiveChecksum-cibuild01-contributor, from=Pillar-badCaseOperationWrongDestructiveChecksum, to=badCaseOperationWrongDestructiveChecksum, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@71d4528b[responseCode=EXISTING_FILE_CHECKSUM_FAILURE, responseText=Requested to replace the file 'DefaultFile' with checksum '1234cccccccc4321', but our file had a different checksum.], pillarID=Pillar-badCaseOperationWrongDestructiveChecksum, pillarChecksumSpec=<null>(default), fileID=DefaultFile, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, checksumDataForExistingFile=<null>(default), checksumDataForNewFile=<null>(default)]
16:12:04.884 WARN  o.b.p.common.PillarAlarmDispatcher - Sending alarm: org.bitrepository.bitrepositoryelements.Alarm@48c10d3[origDateTime=2017-03-02T16:12:04.883+01:00, alarmCode=CHECKSUM_ALARM, alarmRaiser=Pillar-badCaseOperationWrongDestructiveChecksum, alarmText=Requested to replace the file 'DefaultFile' with checksum '1234cccccccc4321', but our file had a different checksum., fileID=DefaultFile, collectionID=TwoPillarCollection]
          Result: Received message on TEST-ALARM-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.AlarmMessage@1212bd7a[correlationID=05ffc22d-cd9c-4e48-9d76-b365d1e2c0ef, collectionID=TwoPillarCollection, destination=TEST-ALARM-TOPIC-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationWrongDestructiveChecksum-cibuild01-contributor, from=Pillar-badCaseOperationWrongDestructiveChecksum, to=<null>(default), version=30, minVersion=24, alarm=org.bitrepository.bitrepositoryelements.Alarm@48c10d3[origDateTime=2017-03-02T16:12:04.883+01:00, alarmCode=CHECKSUM_ALARM, alarmRaiser=Pillar-badCaseOperationWrongDestructiveChecksum, alarmText=Requested to replace the file 'DefaultFile' with checksum '1234cccccccc4321', but our file had a different checksum., fileID=DefaultFile, collectionID=TwoPillarCollection]]
        Step: Retrieve the FinalResponse for the ReplaceFile request
        Step: Pillar should have sent an alarm
      Test success: badCaseOperationWrongDestructiveChecksum
        Added fixture: Initialize a new Pillar.
      Test starting: goodCaseIdentification
        Description: Tests the identification for a ReplaceFile operation on the pillar for the successful scenario.
        Step: Set up constants and variables.
        Step: Setup for having the file and delivering pillar id
        Step: Create and send the identify request message.
          Result: Received message on TEST-TOPIC-goodCaseIdentification-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForReplaceFileResponse@1816701b[correlationID=694edaf9-ef10-450e-816c-7976161f1bc9, collectionID=TwoPillarCollection, destination=TEST-TOPIC-goodCaseIdentification-cibuild01, replyTo=TEST-TOPIC-Pillar-goodCaseIdentification-cibuild01-contributor, from=Pillar-goodCaseIdentification, to=goodCaseIdentification, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@2a3d8a59[responseCode=IDENTIFICATION_POSITIVE, responseText=Operation acknowledged and accepted.], fileID=DefaultFile, pillarID=Pillar-goodCaseIdentification, pillarChecksumSpec=<null>(default), timeToDeliver=org.bitrepository.bitrepositoryelements.TimeMeasureTYPE@649f48f6[timeMeasureUnit=MILLISECONDS, timeMeasureValue=1000]]
        Step: Retrieve and validate the response getPillarID() the pillar.
      Test success: goodCaseIdentification
        Added fixture: Initialize a new Pillar.
      Test starting: goodCaseOperation
        Description: Tests the ReplaceFile operation on the pillar for the success scenario.
        Step: Set up constants and variables.
        Step: Setup for already having the file and delivering pillar id
        Step: Create and send the identify request message.
          Result: Received message on TEST-TOPIC-goodCaseOperation-cibuild01 : org.bitrepository.bitrepositorymessages.ReplaceFileProgressResponse@70dbbbb9[correlationID=0831f9b8-d5f5-45d0-91a5-a348a9cfd136, collectionID=TwoPillarCollection, destination=TEST-TOPIC-goodCaseOperation-cibuild01, replyTo=TEST-TOPIC-Pillar-goodCaseOperation-cibuild01-contributor, from=Pillar-goodCaseOperation, to=goodCaseOperation, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@67d1241b[responseCode=OPERATION_ACCEPTED_PROGRESS, responseText=Performing the ReplaceFileRequest for file 'DefaultFile' at 'TwoPillarCollection'.], pillarID=Pillar-goodCaseOperation, pillarChecksumSpec=<null>(default), fileID=DefaultFile, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt]
          Result: Received message on TEST-TOPIC-goodCaseOperation-cibuild01 : org.bitrepository.bitrepositorymessages.ReplaceFileFinalResponse@6f601ce0[correlationID=0831f9b8-d5f5-45d0-91a5-a348a9cfd136, collectionID=TwoPillarCollection, destination=TEST-TOPIC-goodCaseOperation-cibuild01, replyTo=TEST-TOPIC-Pillar-goodCaseOperation-cibuild01-contributor, from=Pillar-goodCaseOperation, to=goodCaseOperation, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@6ec789ab[responseCode=OPERATION_COMPLETED, responseText=<null>(default)], pillarID=Pillar-goodCaseOperation, pillarChecksumSpec=<null>(default), fileID=DefaultFile, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, checksumDataForExistingFile=<null>(default), checksumDataForNewFile=<null>(default)]
        Step: Retrieve the ProgressResponse for the GetFileIDs request
        Step: Retrieve the FinalResponse for the ReplaceFile request
      Test success: goodCaseOperation
        Added fixture: Initialize a new Pillar.
      Test starting: goodCaseOperationWithChecksumsReturn
        Description: Tests the ReplaceFile operation on the pillar for the success scenario, when requesting both the cheksums of the file returned.
        Step: Set up constants and variables.
        Step: Setup for already having the file and delivering pillar id
        Step: Create and send the identify request message.
          Result: Received message on TEST-TOPIC-goodCaseOperationWithChecksumsReturn-cibuild01 : org.bitrepository.bitrepositorymessages.ReplaceFileProgressResponse@381dbeba[correlationID=4a527d4b-2bb0-4445-8b82-17df87c22d20, collectionID=TwoPillarCollection, destination=TEST-TOPIC-goodCaseOperationWithChecksumsReturn-cibuild01, replyTo=TEST-TOPIC-Pillar-goodCaseOperationWithChecksumsReturn-cibuild01-contributor, from=Pillar-goodCaseOperationWithChecksumsReturn, to=goodCaseOperationWithChecksumsReturn, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@2664d94[responseCode=OPERATION_ACCEPTED_PROGRESS, responseText=Performing the ReplaceFileRequest for file 'DefaultFile' at 'TwoPillarCollection'.], pillarID=Pillar-goodCaseOperationWithChecksumsReturn, pillarChecksumSpec=<null>(default), fileID=DefaultFile, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt]
          Result: Received message on TEST-TOPIC-goodCaseOperationWithChecksumsReturn-cibuild01 : org.bitrepository.bitrepositorymessages.ReplaceFileFinalResponse@bd3df07[correlationID=4a527d4b-2bb0-4445-8b82-17df87c22d20, collectionID=TwoPillarCollection, destination=TEST-TOPIC-goodCaseOperationWithChecksumsReturn-cibuild01, replyTo=TEST-TOPIC-Pillar-goodCaseOperationWithChecksumsReturn-cibuild01-contributor, from=Pillar-goodCaseOperationWithChecksumsReturn, to=goodCaseOperationWithChecksumsReturn, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@1e7fcf3a[responseCode=OPERATION_COMPLETED, responseText=<null>(default)], pillarID=Pillar-goodCaseOperationWithChecksumsReturn, pillarChecksumSpec=<null>(default), fileID=DefaultFile, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, checksumDataForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@4b425a21[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@7bf8b430[checksumType=HMAC_SHA512, checksumSalt={97,98}, otherChecksumType=<null>(default)], checksumValue={18,52,-52,-52,-52,-52,67,34}, calculationTimestamp=2017-03-02T16:12:08.423+01:00], checksumDataForNewFile=org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@6e4667af[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@e207342[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], checksumValue={18,52,-52,-52,-52,-52,67,33}, calculationTimestamp=2017-03-02T16:12:08.424+01:00]]
        Step: Retrieve the ProgressResponse for the GetFileIDs request
        Step: Retrieve the FinalResponse for the ReplaceFile request
      Test success: goodCaseOperationWithChecksumsReturn
    Starting testcase ChecksumEntryTest
      Test starting: testExtendedTestCase
        Description: Test the ChecksumEntry
        Step: Create a ChecksumEntry
      Test success: testExtendedTestCase
    Starting testcase FullPillarModelTest
      Test starting: testPillarModelBasicFunctionality
        Description: Test the basic functions of the full reference pillar model.
        Step: Check the pillar id in the pillar model
        Step: Ask whether it can handle a file of size 0
        Step: Ask whether it can handle a file of maximum size
        Step: Check the ChecksumPillarSpec
      Test success: testPillarModelBasicFunctionality
      Test starting: testPillarModelHasFile
        Description: Test that the file exists, when placed in the archive and cache
        Step: Setup
        Step: Check whether file exists and retrieve it.
        Step: Verify that no exceptions are thrown when verifying file existance.
        Step: Check retrieval of non-default checksum
      Test success: testPillarModelHasFile
      Test starting: testPillarModelNoFile
        Description: Test that the file exists, when placed in the archive and cache
        Step: Setup
        Step: Check whether file exists and try to retrieve it.
        Step: Verify that anexceptions are thrown when verifying file existance.
16:12:11.877 WARN  o.b.pillar.store.FileStorageModel - The file 'DefaultFile' has been requested, but we do not have that file in collection 'TwoPillarCollection'!
      Test success: testPillarModelNoFile
    Starting testcase GetFileIDsTest
        Added fixture: Initialize a new Pillar.
      Test starting: badCaseIdentification
        Description: Tests the identification for a GetFileIDs operation on the pillar for the failure scenario, when the file is missing.
        Step: Set up constants and variables.
        Step: Setup for delivering pillar id and not having the file 
        Step: Create and send the identify request message.
16:12:12.368 WARN  o.b.p.m.IdentifyPillarsForGetFileIDsRequestHandler - The following file is missing 'DefaultFilebadCaseIdentification' at collection 'TwoPillarCollection'.
          Result: Received message on TEST-TOPIC-badCaseIdentification-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForGetFileIDsResponse@45761ad8[correlationID=c30b0fe1-999b-4418-98d5-3e6b1199a329, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseIdentification-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseIdentification-cibuild01-contributor, from=Pillar-badCaseIdentification, to=badCaseIdentification, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@2c7ac668[responseCode=FILE_NOT_FOUND_FAILURE, responseText=File not found.], pillarID=Pillar-badCaseIdentification, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@6336df27[fileID=DefaultFilebadCaseIdentification, allFileIDs=<null>(default)], timeToDeliver=<null>(default)]
        Step: Retrieve and validate the response getPillarID() the pillar.
      Test success: badCaseIdentification
        Added fixture: Initialize a new Pillar.
      Test starting: badCaseOperationNoFile
        Description: Tests the GetFileIDs functionality of the pillar for the failure scenario, where it does not have the file.
        Step: Set up constants and variables.
        Step: Setup for not having the file
        Step: Create and send the actual GetFileIDs message to the pillar.
16:12:13.753 WARN  o.b.p.m.GetFileIDsRequestHandler - The following file is missing 'DefaultFilebadCaseOperationNoFile' at collection 'TwoPillarCollection'.
          Result: Received message on TEST-TOPIC-badCaseOperationNoFile-cibuild01 : org.bitrepository.bitrepositorymessages.GetFileIDsFinalResponse@207e1269[correlationID=a7d0ecf2-1b1c-4ecf-9a5e-3704dccd9315, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseOperationNoFile-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationNoFile-cibuild01-contributor, from=Pillar-badCaseOperationNoFile, to=badCaseOperationNoFile, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@20ab8169[responseCode=FILE_NOT_FOUND_FAILURE, responseText=File not found.], pillarID=Pillar-badCaseOperationNoFile, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@3f3444b2[fileID=DefaultFilebadCaseOperationNoFile, allFileIDs=<null>(default)], resultingFileIDs=<null>(default), partialResult=<null>(default)]
        Step: Retrieve the FinalResponse for the GetFileIDs request
      Test success: badCaseOperationNoFile
        Added fixture: Initialize a new Pillar.
      Test starting: goodCaseIdentification
        Description: Tests the identification for a GetFileIDs operation on the pillar for the successful scenario.
        Step: Set up constants and variables.
        Step: Setup for having the file and delivering pillar id
        Step: Create and send the identify request message.
          Result: Received message on TEST-TOPIC-goodCaseIdentification-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForGetFileIDsResponse@c5f558a[correlationID=7cf7f199-74e0-4b4a-bf77-118e0014cc3c, collectionID=TwoPillarCollection, destination=TEST-TOPIC-goodCaseIdentification-cibuild01, replyTo=TEST-TOPIC-Pillar-goodCaseIdentification-cibuild01-contributor, from=Pillar-goodCaseIdentification, to=goodCaseIdentification, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@f87d95d[responseCode=IDENTIFICATION_POSITIVE, responseText=Operation acknowledged and accepted.], pillarID=Pillar-goodCaseIdentification, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@18dcf1b9[fileID=DefaultFilegoodCaseIdentification, allFileIDs=<null>(default)], timeToDeliver=org.bitrepository.bitrepositoryelements.TimeMeasureTYPE@425a2a7b[timeMeasureUnit=MILLISECONDS, timeMeasureValue=1000]]
        Step: Retrieve and validate the response getPillarID() the pillar.
      Test success: goodCaseIdentification
      Test starting: getPillarCollectionsTest
      Test success: getPillarCollectionsTest
    Starting testcase MediatorTest
      Test starting: testMediatorRuntimeExceptionHandling
        Description: Tests the handling of a runtime exception
        Step: Setup create and start the mediator.
        Step: Send a request to the mediator.
16:12:17.678 WARN  o.b.pillar.MediatorTest$TestMediator - Unexpected exception caught.
java.lang.RuntimeException: I am supposed to throw a RuntimeException
	at org.bitrepository.pillar.MediatorTest$ErroneousRequestHandler.processRequest(MediatorTest.java:122)
	at org.bitrepository.pillar.MediatorTest$ErroneousRequestHandler.processRequest(MediatorTest.java:113)
	at org.bitrepository.pillar.messagehandler.PillarMediator.handleRequest(PillarMediator.java:80)
	at org.bitrepository.service.contributor.AbstractContributorMediator$GeneralRequestHandler.onMessage(AbstractContributorMediator.java:101)
	at org.bitrepository.protocol.messagebus.SimpleMessageBus.lambda$sendMessage$0(SimpleMessageBus.java:73)
	at java.lang.Iterable.forEach(Iterable.java:75)
	at org.bitrepository.protocol.messagebus.SimpleMessageBus.sendMessage(SimpleMessageBus.java:73)
	at org.bitrepository.pillar.MediatorTest.testMediatorRuntimeExceptionHandling(MediatorTest.java:84)
	at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
	at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
	at java.lang.reflect.Method.invoke(Method.java:498)
	at org.testng.internal.MethodInvocationHelper.invokeMethod(MethodInvocationHelper.java:86)
	at org.testng.internal.Invoker.invokeMethod(Invoker.java:643)
	at org.testng.internal.Invoker.invokeTestMethod(Invoker.java:820)
	at org.testng.internal.Invoker.invokeTestMethods(Invoker.java:1128)
	at org.testng.internal.TestMethodWorker.invokeTestMethods(TestMethodWorker.java:129)
	at org.testng.internal.TestMethodWorker.run(TestMethodWorker.java:112)
	at org.testng.TestRunner.privateRun(TestRunner.java:782)
	at org.testng.TestRunner.run(TestRunner.java:632)
	at org.testng.SuiteRunner.runTest(SuiteRunner.java:366)
	at org.testng.SuiteRunner.runSequentially(SuiteRunner.java:361)
	at org.testng.SuiteRunner.privateRun(SuiteRunner.java:319)
	at org.testng.SuiteRunner.run(SuiteRunner.java:268)
	at org.testng.SuiteRunnerWorker.runSuite(SuiteRunnerWorker.java:52)
	at org.testng.SuiteRunnerWorker.run(SuiteRunnerWorker.java:86)
	at org.testng.TestNG.runSuitesSequentially(TestNG.java:1244)
	at org.testng.TestNG.runSuitesLocally(TestNG.java:1169)
	at org.testng.TestNG.run(TestNG.java:1064)
	at org.apache.maven.surefire.testng.TestNGExecutor.run(TestNGExecutor.java:115)
	at org.apache.maven.surefire.testng.TestNGDirectoryTestSuite.executeMulti(TestNGDirectoryTestSuite.java:204)
	at org.apache.maven.surefire.testng.TestNGDirectoryTestSuite.execute(TestNGDirectoryTestSuite.java:107)
	at org.apache.maven.surefire.testng.TestNGProvider.invoke(TestNGProvider.java:112)
	at org.apache.maven.surefire.booter.ForkedBooter.invokeProviderInSameClassLoader(ForkedBooter.java:200)
	at org.apache.maven.surefire.booter.ForkedBooter.runSuitesInProcess(ForkedBooter.java:153)
	at org.apache.maven.surefire.booter.ForkedBooter.main(ForkedBooter.java:103)
          Result: Received message on TEST-TOPIC-testMediatorRuntimeExceptionHandling-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyContributorsForGetStatusResponse@206be60b[correlationID=d3192124-eab5-46d4-becc-375c780e1298, collectionID=TwoPillarCollection, destination=TEST-TOPIC-testMediatorRuntimeExceptionHandling-cibuild01, replyTo=TEST-TOPIC-MediatorUnderTest-cibuild01-contributor, from=MediatorUnderTest, to=MediatorUnderTest, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@25e92583[responseCode=FAILURE, responseText=java.lang.RuntimeException: I am supposed to throw a RuntimeException], contributor=TEST-TOPIC-cibuild01, timeToDeliver=<null>(default)]
16:12:17.684 WARN  o.b.p.common.PillarAlarmDispatcher - Sending alarm: org.bitrepository.bitrepositoryelements.Alarm@4490b985[origDateTime=2017-03-02T16:12:17.683+01:00, alarmCode=COMPONENT_FAILURE, alarmRaiser=MediatorUnderTest, alarmText=java.lang.RuntimeException: I am supposed to throw a RuntimeException, fileID=<null>(default), collectionID=<null>(default)]
          Result: Received message on TEST-ALARM-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.AlarmMessage@3bb444a2[correlationID=22495bd6-bb79-4aec-ad64-37b69393b92e, collectionID=<null>(default), destination=TEST-ALARM-TOPIC-cibuild01, replyTo=TEST-TOPIC-MediatorUnderTest-cibuild01-contributor, from=MediatorUnderTest, to=<null>(default), version=30, minVersion=24, alarm=org.bitrepository.bitrepositoryelements.Alarm@4490b985[origDateTime=2017-03-02T16:12:17.683+01:00, alarmCode=COMPONENT_FAILURE, alarmRaiser=MediatorUnderTest, alarmText=java.lang.RuntimeException: I am supposed to throw a RuntimeException, fileID=<null>(default), collectionID=<null>(default)]]
      Test success: testMediatorRuntimeExceptionHandling
      Test starting: componentIDTest
      Test success: componentIDTest
    Starting testcase RecalculateChecksumWorkflowTest
        Added fixture: Initialize the Reference pillar cache with an empty file in default collection TwoPillarCollection
      Test starting: testWorkflowDoesNotRecalculateWhenNotNeeded
        Description: Test that the workflow does not recalculates the workflows, when the maximum age has not yet been met.
        Step: Create and run workflow
      Test success: testWorkflowDoesNotRecalculateWhenNotNeeded
        Added fixture: Initialize the Reference pillar cache with an empty file in default collection TwoPillarCollection
      Test starting: testWorkflowRecalculatesChecksum
        Description: Test that the workflow recalculates the workflows, when the maximum age has been met.
        Step: Create and run workflow
      Test success: testWorkflowRecalculatesChecksum
    Starting testcase GeneralMessageHandlingTest
        Added fixture: Initialize a new Pillar.
      Test starting: testPillarMessageHandler
        Description: Test the handling of the PillarMessageHandler super-class.
        Step: Setup
        Step: Test the pillar ID
      Test success: testPillarMessageHandler
        Added fixture: Initialize a new Pillar.
      Test starting: testPillarMessageHandlerValidateFileIDFormatDefaultFileId
        Description: Test the validation of file id formats of the PillarMessageHandler super-class on the default file id
      Test success: testPillarMessageHandlerValidateFileIDFormatDefaultFileId
        Added fixture: Initialize a new Pillar.
      Test starting: testPillarMessageHandlerValidateFileIDFormatEnvHomePathFileId
        Description: Test the validation of file id formats of the PillarMessageHandler super-class on a file id containing path relative paths from the environment variable home folder
      Test success: testPillarMessageHandlerValidateFileIDFormatEnvHomePathFileId
        Added fixture: Initialize a new Pillar.
      Test starting: testPillarMessageHandlerValidateFileIDFormatFolderFileId
        Description: Test the validation of file id formats of the PillarMessageHandler super-class on a file id with directory path
      Test success: testPillarMessageHandlerValidateFileIDFormatFolderFileId
        Added fixture: Initialize a new Pillar.
      Test starting: testPillarMessageHandlerValidateFileIDFormatParentFolderFileId
        Description: Test the validation of file id formats of the PillarMessageHandler super-class on a file id containing path to a parent directory
      Test success: testPillarMessageHandlerValidateFileIDFormatParentFolderFileId
        Added fixture: Initialize a new Pillar.
      Test starting: testPillarMessageHandlerValidateFileIDFormatRootPathFileId
        Description: Test the validation of file id formats of the PillarMessageHandler super-class on a file id containing path from the root folder
      Test success: testPillarMessageHandlerValidateFileIDFormatRootPathFileId
        Added fixture: Initialize a new Pillar.
      Test starting: testPillarMessageHandlerValidateFileIDFormatSubFolderToParentFolderFileId
        Description: Test the validation of file id formats of the PillarMessageHandler super-class on a file id containing path to a parent directory, but starting with a sub-folder
      Test success: testPillarMessageHandlerValidateFileIDFormatSubFolderToParentFolderFileId
        Added fixture: Initialize a new Pillar.
      Test starting: testPillarMessageHandlerValidateFileIDFormatTildeHomePathFileId
        Description: Test the validation of file id formats of the PillarMessageHandler super-class on a file id containing path relative paths from the tilde home folder
      Test success: testPillarMessageHandlerValidateFileIDFormatTildeHomePathFileId
        Added fixture: Initialize a new Pillar.
      Test starting: testPillarMessageHandlerValidateFileIDFormatTooLong
        Description: Test the validation of file id formats of the PillarMessageHandler super-class on a file id which has more characters than required
      Test success: testPillarMessageHandlerValidateFileIDFormatTooLong
    Starting testcase GetAuditTrailsTest
        Added fixture: Initialize a new Pillar.
      Test starting: checksumPillarGetAuditTrailsMaximumNumberOfResults
        Description: Tests the GetAuditTrails functionality of the pillar for the successful scenario, where a limited number of audit trails are requested.
        Step: Set up constants and variables.
        Step: Send the request for the limited amount of audit trails to the pillar.
          Result: Received message on TEST-TOPIC-checksumPillarGetAuditTrailsMaximumNumberOfResults-cibuild01 : org.bitrepository.bitrepositorymessages.GetAuditTrailsProgressResponse@3342e5ce[correlationID=97eb6fe1-55ca-4b6e-90a1-9f22a39d8860, collectionID=TwoPillarCollection, destination=TEST-TOPIC-checksumPillarGetAuditTrailsMaximumNumberOfResults-cibuild01, replyTo=TEST-TOPIC-Pillar-checksumPillarGetAuditTrailsMaximumNumberOfResults-cibuild01-contributor, from=Pillar-checksumPillarGetAuditTrailsMaximumNumberOfResults, to=Pillar-checksumPillarGetAuditTrailsMaximumNumberOfResults, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@5ee5178e[responseCode=OPERATION_ACCEPTED_PROGRESS, responseText=Starting to extract the requested audit trails.], contributor=Pillar-checksumPillarGetAuditTrailsMaximumNumberOfResults, resultAddress=<null>(default)]
          Result: Received message on TEST-TOPIC-checksumPillarGetAuditTrailsMaximumNumberOfResults-cibuild01 : org.bitrepository.bitrepositorymessages.GetAuditTrailsFinalResponse@4bca0913[correlationID=97eb6fe1-55ca-4b6e-90a1-9f22a39d8860, collectionID=TwoPillarCollection, destination=TEST-TOPIC-checksumPillarGetAuditTrailsMaximumNumberOfResults-cibuild01, replyTo=TEST-TOPIC-Pillar-checksumPillarGetAuditTrailsMaximumNumberOfResults-cibuild01-contributor, from=Pillar-checksumPillarGetAuditTrailsMaximumNumberOfResults, to=Pillar-checksumPillarGetAuditTrailsMaximumNumberOfResults, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@185ea2dd[responseCode=OPERATION_COMPLETED, responseText=<null>(default)], contributor=Pillar-checksumPillarGetAuditTrailsMaximumNumberOfResults, resultingAuditTrails=org.bitrepository.bitrepositoryelements.ResultingAuditTrails@3222e820[resultAddress=<null>(default), auditTrailEvents=org.bitrepository.bitrepositoryelements.AuditTrailEvents@6f3da2ba[auditTrailEvent={org.bitrepository.bitrepositoryelements.AuditTrailEvent@7424acdf[sequenceNumber=1, fileID=fileID1488467543614, reportingComponent=MOCK-AUDIT-MANAGER, actorOnFile=ACTOR, actionOnFile=CHECKSUM_CALCULATED, actionDateTime=2017-03-02T16:12:23.614+01:00, info=InFo, operationID=operationID, certificateID=certificateid, auditTrailInformation=auditTrails],org.bitrepository.bitrepositoryelements.AuditTrailEvent@1981a0cc[sequenceNumber=2, fileID=fileID1488467543614, reportingComponent=MOCK-AUDIT-MANAGER, actorOnFile=ACTOR, actionOnFile=DELETE_FILE, actionDateTime=2017-03-02T16:12:23.614+01:00, info=InFo, operationID=operationID, certificateID=certificateid, auditTrailInformation=auditTrails],org.bitrepository.bitrepositoryelements.AuditTrailEvent@3cc73834[sequenceNumber=3, fileID=fileID1488467543614, reportingComponent=MOCK-AUDIT-MANAGER, actorOnFile=ACTOR, actionOnFile=FAILURE, actionDateTime=2017-03-02T16:12:23.614+01:00, info=InFo, operationID=operationID, certificateID=certificateid, auditTrailInformation=auditTrails],org.bitrepository.bitrepositoryelements.AuditTrailEvent@3eed7564[sequenceNumber=4, fileID=fileID1488467543614, reportingComponent=MOCK-AUDIT-MANAGER, actorOnFile=ACTOR, actionOnFile=FILE_MOVED, actionDateTime=2017-03-02T16:12:23.615+01:00, info=InFo, operationID=operationID, certificateID=certificateid, auditTrailInformation=auditTrails],org.bitrepository.bitrepositoryelements.AuditTrailEvent@6ffe7432[sequenceNumber=5, fileID=fileID1488467543614, reportingComponent=MOCK-AUDIT-MANAGER, actorOnFile=ACTOR, actionOnFile=GET_CHECKSUMS, actionDateTime=2017-03-02T16:12:23.615+01:00, info=InFo, operationID=operationID, certificateID=certificateid, auditTrailInformation=auditTrails]}]], partialResult=true]
        Step: Validate the final response
      Test success: checksumPillarGetAuditTrailsMaximumNumberOfResults
        Added fixture: Initialize a new Pillar.
      Test starting: checksumPillarGetAuditTrailsSpecificRequests
        Description: Tests the GetAuditTrails functionality of the pillar for the successful scenario, where a specific audit trail are requested.
        Step: Set up constants and variables.
        Step: Send the identification request
          Result: Received message on TEST-TOPIC-checksumPillarGetAuditTrailsSpecificRequests-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyContributorsForGetAuditTrailsResponse@411fde6a[correlationID=a2f23eaf-3729-4d3a-b19e-8a17d58cb710, collectionID=TwoPillarCollection, destination=TEST-TOPIC-checksumPillarGetAuditTrailsSpecificRequests-cibuild01, replyTo=TEST-TOPIC-Pillar-checksumPillarGetAuditTrailsSpecificRequests-cibuild01-contributor, from=Pillar-checksumPillarGetAuditTrailsSpecificRequests, to=Pillar-checksumPillarGetAuditTrailsSpecificRequests, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@150b294b[responseCode=IDENTIFICATION_POSITIVE, responseText=<null>(default)]]
        Step: Retrieve and validate the response.
        Step: Make and send the request for the actual GetAuditTrails operation
          Result: Received message on TEST-TOPIC-checksumPillarGetAuditTrailsSpecificRequests-cibuild01 : org.bitrepository.bitrepositorymessages.GetAuditTrailsProgressResponse@42f4f517[correlationID=a2f23eaf-3729-4d3a-b19e-8a17d58cb710, collectionID=TwoPillarCollection, destination=TEST-TOPIC-checksumPillarGetAuditTrailsSpecificRequests-cibuild01, replyTo=TEST-TOPIC-Pillar-checksumPillarGetAuditTrailsSpecificRequests-cibuild01-contributor, from=Pillar-checksumPillarGetAuditTrailsSpecificRequests, to=Pillar-checksumPillarGetAuditTrailsSpecificRequests, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@7da79fad[responseCode=OPERATION_ACCEPTED_PROGRESS, responseText=Starting to extract the requested audit trails.], contributor=Pillar-checksumPillarGetAuditTrailsSpecificRequests, resultAddress=<null>(default)]
          Result: Received message on TEST-TOPIC-checksumPillarGetAuditTrailsSpecificRequests-cibuild01 : org.bitrepository.bitrepositorymessages.GetAuditTrailsFinalResponse@31aab023[correlationID=a2f23eaf-3729-4d3a-b19e-8a17d58cb710, collectionID=TwoPillarCollection, destination=TEST-TOPIC-checksumPillarGetAuditTrailsSpecificRequests-cibuild01, replyTo=TEST-TOPIC-Pillar-checksumPillarGetAuditTrailsSpecificRequests-cibuild01-contributor, from=Pillar-checksumPillarGetAuditTrailsSpecificRequests, to=Pillar-checksumPillarGetAuditTrailsSpecificRequests, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@7ea6d3[responseCode=OPERATION_COMPLETED, responseText=<null>(default)], contributor=Pillar-checksumPillarGetAuditTrailsSpecificRequests, resultingAuditTrails=org.bitrepository.bitrepositoryelements.ResultingAuditTrails@65c7a786[resultAddress=<null>(default), auditTrailEvents=org.bitrepository.bitrepositoryelements.AuditTrailEvents@245c0664[auditTrailEvent={org.bitrepository.bitrepositoryelements.AuditTrailEvent@40939164[sequenceNumber=1, fileID=fileID1488467544047, reportingComponent=MOCK-AUDIT-MANAGER, actorOnFile=ACTOR, actionOnFile=OTHER, actionDateTime=2017-03-02T16:12:24.047+01:00, info=InFo, operationID=operationID, certificateID=certificateid, auditTrailInformation=auditTrails]}]], partialResult=false]
        Step: Receive and validate the progress response.
        Step: Receive and validate the final response
        Step: Make another request, where both ingested audit trails is requested
          Result: Received message on TEST-TOPIC-checksumPillarGetAuditTrailsSpecificRequests-cibuild01 : org.bitrepository.bitrepositorymessages.GetAuditTrailsProgressResponse@35aeef9b[correlationID=a2f23eaf-3729-4d3a-b19e-8a17d58cb710, collectionID=TwoPillarCollection, destination=TEST-TOPIC-checksumPillarGetAuditTrailsSpecificRequests-cibuild01, replyTo=TEST-TOPIC-Pillar-checksumPillarGetAuditTrailsSpecificRequests-cibuild01-contributor, from=Pillar-checksumPillarGetAuditTrailsSpecificRequests, to=Pillar-checksumPillarGetAuditTrailsSpecificRequests, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@6d0d853f[responseCode=OPERATION_ACCEPTED_PROGRESS, responseText=Starting to extract the requested audit trails.], contributor=Pillar-checksumPillarGetAuditTrailsSpecificRequests, resultAddress=<null>(default)]
          Result: Received message on TEST-TOPIC-checksumPillarGetAuditTrailsSpecificRequests-cibuild01 : org.bitrepository.bitrepositorymessages.GetAuditTrailsFinalResponse@2926c1dc[correlationID=a2f23eaf-3729-4d3a-b19e-8a17d58cb710, collectionID=TwoPillarCollection, destination=TEST-TOPIC-checksumPillarGetAuditTrailsSpecificRequests-cibuild01, replyTo=TEST-TOPIC-Pillar-checksumPillarGetAuditTrailsSpecificRequests-cibuild01-contributor, from=Pillar-checksumPillarGetAuditTrailsSpecificRequests, to=Pillar-checksumPillarGetAuditTrailsSpecificRequests, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@75e26d2d[responseCode=OPERATION_COMPLETED, responseText=<null>(default)], contributor=Pillar-checksumPillarGetAuditTrailsSpecificRequests, resultingAuditTrails=org.bitrepository.bitrepositoryelements.ResultingAuditTrails@3772963d[resultAddress=<null>(default), auditTrailEvents=org.bitrepository.bitrepositoryelements.AuditTrailEvents@3657d991[auditTrailEvent={org.bitrepository.bitrepositoryelements.AuditTrailEvent@40939164[sequenceNumber=1, fileID=fileID1488467544047, reportingComponent=MOCK-AUDIT-MANAGER, actorOnFile=ACTOR, actionOnFile=OTHER, actionDateTime=2017-03-02T16:12:24.047+01:00, info=InFo, operationID=operationID, certificateID=certificateid, auditTrailInformation=auditTrails],org.bitrepository.bitrepositoryelements.AuditTrailEvent@2960c6a6[sequenceNumber=2, fileID=notThisFile, reportingComponent=MOCK-AUDIT-MANAGER, actorOnFile=UnknownActor, actionOnFile=FAILURE, actionDateTime=2017-03-02T16:12:24.048+01:00, info=badInfo, operationID=operationID, certificateID=certificateid, auditTrailInformation=WrongAuditTrail]}]], partialResult=false]
        Step: Receive and validate the progress response.
        Step: Receive and validate the final response
      Test success: checksumPillarGetAuditTrailsSpecificRequests
        Added fixture: Initialize a new Pillar.
      Test starting: checksumPillarGetAuditTrailsSuccessful
        Description: Tests the GetAuditTrails functionality of the pillar for the successful scenario, where all audit trails are requested.
        Step: Set up constants and variables.
        Step: Send the identification request
          Result: Received message on TEST-TOPIC-checksumPillarGetAuditTrailsSuccessful-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyContributorsForGetAuditTrailsResponse@66100089[correlationID=5fbbcf6a-9e0d-46fd-b4c0-b585b3e6f5ac, collectionID=TwoPillarCollection, destination=TEST-TOPIC-checksumPillarGetAuditTrailsSuccessful-cibuild01, replyTo=TEST-TOPIC-Pillar-checksumPillarGetAuditTrailsSuccessful-cibuild01-contributor, from=Pillar-checksumPillarGetAuditTrailsSuccessful, to=Pillar-checksumPillarGetAuditTrailsSuccessful, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@52cd65a[responseCode=IDENTIFICATION_POSITIVE, responseText=<null>(default)]]
        Step: Make and send the request for the actual GetAuditTrails operation
          Result: Received message on TEST-TOPIC-checksumPillarGetAuditTrailsSuccessful-cibuild01 : org.bitrepository.bitrepositorymessages.GetAuditTrailsProgressResponse@1aef7194[correlationID=5fbbcf6a-9e0d-46fd-b4c0-b585b3e6f5ac, collectionID=TwoPillarCollection, destination=TEST-TOPIC-checksumPillarGetAuditTrailsSuccessful-cibuild01, replyTo=TEST-TOPIC-Pillar-checksumPillarGetAuditTrailsSuccessful-cibuild01-contributor, from=Pillar-checksumPillarGetAuditTrailsSuccessful, to=Pillar-checksumPillarGetAuditTrailsSuccessful, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@2cbcecd0[responseCode=OPERATION_ACCEPTED_PROGRESS, responseText=Starting to extract the requested audit trails.], contributor=Pillar-checksumPillarGetAuditTrailsSuccessful, resultAddress=<null>(default)]
          Result: Received message on TEST-TOPIC-checksumPillarGetAuditTrailsSuccessful-cibuild01 : org.bitrepository.bitrepositorymessages.GetAuditTrailsFinalResponse@4a4ea586[correlationID=5fbbcf6a-9e0d-46fd-b4c0-b585b3e6f5ac, collectionID=TwoPillarCollection, destination=TEST-TOPIC-checksumPillarGetAuditTrailsSuccessful-cibuild01, replyTo=TEST-TOPIC-Pillar-checksumPillarGetAuditTrailsSuccessful-cibuild01-contributor, from=Pillar-checksumPillarGetAuditTrailsSuccessful, to=Pillar-checksumPillarGetAuditTrailsSuccessful, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@29333493[responseCode=OPERATION_COMPLETED, responseText=<null>(default)], contributor=Pillar-checksumPillarGetAuditTrailsSuccessful, resultingAuditTrails=org.bitrepository.bitrepositoryelements.ResultingAuditTrails@48b193f0[resultAddress=<null>(default), auditTrailEvents=org.bitrepository.bitrepositoryelements.AuditTrailEvents@3202c5a[auditTrailEvent={org.bitrepository.bitrepositoryelements.AuditTrailEvent@3c7ddb2d[sequenceNumber=1, fileID=fileid, reportingComponent=MOCK-AUDIT-MANAGER, actorOnFile=actor, actionOnFile=OTHER, actionDateTime=2017-03-02T16:12:24.451+01:00, info=info, operationID=operationID, certificateID=certificateID, auditTrailInformation=auditTrail]}]], partialResult=false]
        Step: Receive and validate the progress response.
        Step: Receive and validate the final response
      Test success: checksumPillarGetAuditTrailsSuccessful
    Starting testcase PutFileTest
        Added fixture: Initialize a new Pillar.
      Test starting: badCaseIdentification
        Description: Tests the identification for a PutFile operation on the pillar for the failure scenario, when the file already exists.
        Step: Set up constants and variables.
        Step: Setup for already having the file and delivering pillar id
        Step: Create and send the identify request message.
          Result: Received message on TEST-TOPIC-badCaseIdentification-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForPutFileResponse@30132d0a[correlationID=6d8cadc5-d105-409a-b666-956bd6e3359b, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseIdentification-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseIdentification-cibuild01-contributor, from=Pillar-badCaseIdentification, to=badCaseIdentification, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@20fc59c2[responseCode=DUPLICATE_FILE_FAILURE, responseText=<null>(default)], pillarID=Pillar-badCaseIdentification, fileID=DefaultFilebadCaseIdentification, pillarChecksumSpec=<null>(default), checksumDataForExistingFile=<null>(default), timeToDeliver=org.bitrepository.bitrepositoryelements.TimeMeasureTYPE@34a05f9[timeMeasureUnit=MILLISECONDS, timeMeasureValue=1000]]
        Step: Retrieve and validate the response getPillarID() the pillar.
      Test success: badCaseIdentification
        Added fixture: Initialize a new Pillar.
      Test starting: badCaseOperationFileAlreadyExists
        Description: Tests the PutFile operation on the pillar for the failure scenario, when the file already exists.
        Step: Set up constants and variables.
        Step: Setup for already having the file and delivering pillar id
        Step: Create and send the identify request message.
          Result: Received message on TEST-TOPIC-badCaseOperationFileAlreadyExists-cibuild01 : org.bitrepository.bitrepositorymessages.PutFileFinalResponse@390b4bcc[correlationID=f4c4197b-da94-4a11-9c85-51b8bc80f008, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseOperationFileAlreadyExists-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationFileAlreadyExists-cibuild01-contributor, from=Pillar-badCaseOperationFileAlreadyExists, to=badCaseOperationFileAlreadyExists, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@6c087b6a[responseCode=DUPLICATE_FILE_FAILURE, responseText=We already have the file], pillarID=Pillar-badCaseOperationFileAlreadyExists, pillarChecksumSpec=<null>(default), fileID=DefaultFilebadCaseOperationFileAlreadyExists, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, checksumDataForNewFile=<null>(default), checksumDataForExistingFile=<null>(default)]
        Step: Retrieve the FinalResponse for the PutFile request
      Test success: badCaseOperationFileAlreadyExists
        Added fixture: Initialize a new Pillar.
      Test starting: badCasePutOperationNoValidationChecksum
        Description: Tests the PutFile operation on the pillar for the failure scenario, when no validation checksum is given but required.
        Step: Set up constants and variables.
        Step: Setup for not already having the file and delivering pillar id
        Step: Create and send the identify request message.
          Result: Received message on TEST-TOPIC-badCasePutOperationNoValidationChecksum-cibuild01 : org.bitrepository.bitrepositorymessages.PutFileFinalResponse@14c42273[correlationID=460b4b9d-e43a-43d6-8808-ced032cfd81f, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCasePutOperationNoValidationChecksum-cibuild01, replyTo=TEST-TOPIC-Pillar-badCasePutOperationNoValidationChecksum-cibuild01-contributor, from=Pillar-badCasePutOperationNoValidationChecksum, to=badCasePutOperationNoValidationChecksum, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@7d1fd3d4[responseCode=NEW_FILE_CHECKSUM_FAILURE, responseText=A checksum is required for the PutFile operation to be performed.], pillarID=Pillar-badCasePutOperationNoValidationChecksum, pillarChecksumSpec=<null>(default), fileID=DefaultFilebadCasePutOperationNoValidationChecksum, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, checksumDataForNewFile=<null>(default), checksumDataForExistingFile=<null>(default)]
16:12:27.684 WARN  o.b.p.common.PillarAlarmDispatcher - Sending alarm: org.bitrepository.bitrepositoryelements.Alarm@1778ab89[origDateTime=2017-03-02T16:12:27.683+01:00, alarmCode=CHECKSUM_ALARM, alarmRaiser=Pillar-badCasePutOperationNoValidationChecksum, alarmText=A checksum is required for the PutFile operation to be performed., fileID=DefaultFilebadCasePutOperationNoValidationChecksum, collectionID=TwoPillarCollection]
          Result: Received message on TEST-ALARM-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.AlarmMessage@3a88e385[correlationID=6193c3b0-5de2-4d58-8df0-20c5547091f5, collectionID=TwoPillarCollection, destination=TEST-ALARM-TOPIC-cibuild01, replyTo=TEST-TOPIC-Pillar-badCasePutOperationNoValidationChecksum-cibuild01-contributor, from=Pillar-badCasePutOperationNoValidationChecksum, to=<null>(default), version=30, minVersion=24, alarm=org.bitrepository.bitrepositoryelements.Alarm@1778ab89[origDateTime=2017-03-02T16:12:27.683+01:00, alarmCode=CHECKSUM_ALARM, alarmRaiser=Pillar-badCasePutOperationNoValidationChecksum, alarmText=A checksum is required for the PutFile operation to be performed., fileID=DefaultFilebadCasePutOperationNoValidationChecksum, collectionID=TwoPillarCollection]]
        Step: Retrieve the FinalResponse for the PutFile request
        Step: Pillar should have sent an alarm
      Test success: badCasePutOperationNoValidationChecksum
        Added fixture: Initialize a new Pillar.
      Test starting: goodCaseIdentification
        Description: Tests the identification for a PutFile operation on the pillar for the successful scenario.
        Step: Set up constants and variables.
        Step: Setup for not already having the file and delivering pillar id
        Step: Create and send the identify request message.
          Result: Received message on TEST-TOPIC-goodCaseIdentification-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForPutFileResponse@3e04f7a[correlationID=c105abee-72da-407f-a8f8-e37ca9794ed7, collectionID=TwoPillarCollection, destination=TEST-TOPIC-goodCaseIdentification-cibuild01, replyTo=TEST-TOPIC-Pillar-goodCaseIdentification-cibuild01-contributor, from=Pillar-goodCaseIdentification, to=goodCaseIdentification, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@68118674[responseCode=IDENTIFICATION_POSITIVE, responseText=Operation acknowledged and accepted.], pillarID=Pillar-goodCaseIdentification, fileID=DefaultFilegoodCaseIdentification, pillarChecksumSpec=<null>(default), checksumDataForExistingFile=<null>(default), timeToDeliver=org.bitrepository.bitrepositoryelements.TimeMeasureTYPE@1a5d2c2f[timeMeasureUnit=MILLISECONDS, timeMeasureValue=1000]]
        Step: Retrieve and validate the response getPillarID() the pillar.
      Test success: goodCaseIdentification
        Added fixture: Initialize a new Pillar.
      Test starting: goodCaseOperationWithChecksumReturn
        Description: Tests the PutFile operation on the pillar for the success scenario, when requesting the cheksum of the file returned.
        Step: Set up constants and variables.
        Step: Setup for not already having the file and delivering pillar id, and delivering an answer for the checksum request
        Step: Create and send the identify request message.
          Result: Received message on TEST-TOPIC-goodCaseOperationWithChecksumReturn-cibuild01 : org.bitrepository.bitrepositorymessages.PutFileProgressResponse@1bcc365b[correlationID=ae332632-2148-4101-b620-55d05317a35a, collectionID=TwoPillarCollection, destination=TEST-TOPIC-goodCaseOperationWithChecksumReturn-cibuild01, replyTo=TEST-TOPIC-Pillar-goodCaseOperationWithChecksumReturn-cibuild01-contributor, from=Pillar-goodCaseOperationWithChecksumReturn, to=goodCaseOperationWithChecksumReturn, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@476e7057[responseCode=OPERATION_ACCEPTED_PROGRESS, responseText=Started to receive data.], pillarID=Pillar-goodCaseOperationWithChecksumReturn, pillarChecksumSpec=<null>(default), fileID=DefaultFilegoodCaseOperationWithChecksumReturn, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt]
          Result: Received message on TEST-TOPIC-goodCaseOperationWithChecksumReturn-cibuild01 : org.bitrepository.bitrepositorymessages.PutFileFinalResponse@55bbe3d2[correlationID=ae332632-2148-4101-b620-55d05317a35a, collectionID=TwoPillarCollection, destination=TEST-TOPIC-goodCaseOperationWithChecksumReturn-cibuild01, replyTo=TEST-TOPIC-Pillar-goodCaseOperationWithChecksumReturn-cibuild01-contributor, from=Pillar-goodCaseOperationWithChecksumReturn, to=goodCaseOperationWithChecksumReturn, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@2f3f69d0[responseCode=OPERATION_COMPLETED, responseText=<null>(default)], pillarID=Pillar-goodCaseOperationWithChecksumReturn, pillarChecksumSpec=<null>(default), fileID=DefaultFilegoodCaseOperationWithChecksumReturn, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, checksumDataForNewFile=org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@1be748a8[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@2e00fc16[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], checksumValue={18,52,-52,-52,-52,-52,67,33}, calculationTimestamp=2017-03-02T16:12:29.423+01:00], checksumDataForExistingFile=<null>(default)]
        Step: Retrieve the ProgressResponse for the GetFileIDs request
        Step: Retrieve the FinalResponse for the PutFile request
      Test success: goodCaseOperationWithChecksumReturn
    Starting testcase DeleteFileTest
        Added fixture: Initialize a new Pillar.
      Test starting: badCaseIdentification
        Description: Tests the identification for a DeleteFile operation on the checksum pillar for the failure scenario, when the file is missing.
        Step: Set up constants and variables.
        Step: Setup for delivering pillar id and not having the file 
        Step: Create and send the identify request message.
          Result: Received message on TEST-TOPIC-badCaseIdentification-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForDeleteFileResponse@194db610[correlationID=6a2c792c-8d3e-4707-b61f-353b89e9ef25, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseIdentification-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseIdentification-cibuild01-contributor, from=Pillar-badCaseIdentification, to=badCaseIdentification, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@81e3459[responseCode=FILE_NOT_FOUND_FAILURE, responseText=File not found.], fileID=DefaultFilebadCaseIdentification, pillarID=Pillar-badCaseIdentification, pillarChecksumSpec=<null>(default), timeToDeliver=<null>(default)]
        Step: Retrieve and validate the response getPillarID() the pillar.
      Test success: badCaseIdentification
        Added fixture: Initialize a new Pillar.
      Test starting: badCaseOperationMissingVerification
        Description: Tests the DeleteFile functionality of the pillar for the failure scenario, where it does not have the file.
        Step: Set up constants and variables.
        Step: Setup for delivering pillar id and having the file 
        Step: Create and send the actual DeleteFile message to the pillar.
          Result: Received message on TEST-TOPIC-badCaseOperationMissingVerification-cibuild01 : org.bitrepository.bitrepositorymessages.DeleteFileFinalResponse@1f34fada[correlationID=c5d624dd-24c0-4563-9c83-a31cd1fc5fa9, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseOperationMissingVerification-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationMissingVerification-cibuild01-contributor, from=Pillar-badCaseOperationMissingVerification, to=badCaseOperationMissingVerification, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@3ccf53f7[responseCode=EXISTING_FILE_CHECKSUM_FAILURE, responseText=No mandatory checksum for destructive operation was supplied.], pillarID=Pillar-badCaseOperationMissingVerification, fileID=DefaultFilebadCaseOperationMissingVerification, checksumDataForExistingFile=<null>(default)]
16:12:32.331 WARN  o.b.p.common.PillarAlarmDispatcher - Sending alarm: org.bitrepository.bitrepositoryelements.Alarm@5c0caf75[origDateTime=2017-03-02T16:12:32.331+01:00, alarmCode=CHECKSUM_ALARM, alarmRaiser=Pillar-badCaseOperationMissingVerification, alarmText=No mandatory checksum for destructive operation was supplied., fileID=DefaultFilebadCaseOperationMissingVerification, collectionID=TwoPillarCollection]
          Result: Received message on TEST-ALARM-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.AlarmMessage@64d67c04[correlationID=03f80379-410d-4ca7-855f-6ce8e395002f, collectionID=TwoPillarCollection, destination=TEST-ALARM-TOPIC-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationMissingVerification-cibuild01-contributor, from=Pillar-badCaseOperationMissingVerification, to=<null>(default), version=30, minVersion=24, alarm=org.bitrepository.bitrepositoryelements.Alarm@5c0caf75[origDateTime=2017-03-02T16:12:32.331+01:00, alarmCode=CHECKSUM_ALARM, alarmRaiser=Pillar-badCaseOperationMissingVerification, alarmText=No mandatory checksum for destructive operation was supplied., fileID=DefaultFilebadCaseOperationMissingVerification, collectionID=TwoPillarCollection]]
        Step: Retrieve the FinalResponse for the DeleteFile request
        Step: Pillar should have sent an alarm
      Test success: badCaseOperationMissingVerification
        Added fixture: Initialize a new Pillar.
      Test starting: badCaseOperationNoFile
        Description: Tests the DeleteFile functionality of the pillar for the failure scenario, where it does not have the file.
        Step: Set up constants and variables.
        Step: Setup for delivering pillar id and not having the file 
        Step: Create and send the actual DeleteFile message to the pillar.
          Result: Received message on TEST-TOPIC-badCaseOperationNoFile-cibuild01 : org.bitrepository.bitrepositorymessages.DeleteFileFinalResponse@2d607f48[correlationID=0d73b097-260b-4310-b3bb-92efbcc7f55e, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseOperationNoFile-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationNoFile-cibuild01-contributor, from=Pillar-badCaseOperationNoFile, to=badCaseOperationNoFile, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@1112b12f[responseCode=FILE_NOT_FOUND_FAILURE, responseText=File not found.], pillarID=Pillar-badCaseOperationNoFile, fileID=DefaultFilebadCaseOperationNoFile, checksumDataForExistingFile=<null>(default)]
          Result: Received message on TEST-TOPIC-badCaseOperationNoFile-cibuild01 : org.bitrepository.bitrepositorymessages.DeleteFileFinalResponse@3ed2983b[correlationID=0d73b097-260b-4310-b3bb-92efbcc7f55e, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseOperationNoFile-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationNoFile-cibuild01-contributor, from=Pillar-badCaseOperationNoFile, to=badCaseOperationNoFile, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@10663a96[responseCode=FILE_NOT_FOUND_FAILURE, responseText=File not found.], pillarID=Pillar-badCaseOperationNoFile, fileID=DefaultFilebadCaseOperationNoFile, checksumDataForExistingFile=<null>(default)]
        Step: Retrieve the FinalResponse for the DeleteFile request
      Test success: badCaseOperationNoFile
          Result: The following messages haven't been handled by the testcase: 
org.bitrepository.bitrepositorymessages.DeleteFileFinalResponse@3ed2983b[correlationID=0d73b097-260b-4310-b3bb-92efbcc7f55e, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseOperationNoFile-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationNoFile-cibuild01-contributor, from=Pillar-badCaseOperationNoFile, to=badCaseOperationNoFile, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@10663a96[responseCode=FILE_NOT_FOUND_FAILURE, responseText=File not found.], pillarID=Pillar-badCaseOperationNoFile, fileID=DefaultFilebadCaseOperationNoFile, checksumDataForExistingFile=<null>(default)]
16:12:33.617 WARN  o.b.protocol.bus.MessageReceiver - The following messages haven't been handled by the testcase: 
org.bitrepository.bitrepositorymessages.DeleteFileFinalResponse@3ed2983b[correlationID=0d73b097-260b-4310-b3bb-92efbcc7f55e, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseOperationNoFile-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationNoFile-cibuild01-contributor, from=Pillar-badCaseOperationNoFile, to=badCaseOperationNoFile, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@10663a96[responseCode=FILE_NOT_FOUND_FAILURE, responseText=File not found.], pillarID=Pillar-badCaseOperationNoFile, fileID=DefaultFilebadCaseOperationNoFile, checksumDataForExistingFile=<null>(default)]
        Added fixture: Initialize a new Pillar.
      Test starting: goodCaseIdentification
        Description: Tests the identification for a DeleteFile operation on the pillar for the successful scenario.
        Step: Set up constants and variables.
        Step: Setup for having the file and delivering pillar id
        Step: Create and send the identify request message.
          Result: Received message on TEST-TOPIC-goodCaseIdentification-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForDeleteFileResponse@1e0b53f6[correlationID=e6c191aa-d9b7-455b-b33e-4b5bbd6a9237, collectionID=TwoPillarCollection, destination=TEST-TOPIC-goodCaseIdentification-cibuild01, replyTo=TEST-TOPIC-Pillar-goodCaseIdentification-cibuild01-contributor, from=Pillar-goodCaseIdentification, to=goodCaseIdentification, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@25a7fc5[responseCode=IDENTIFICATION_POSITIVE, responseText=Operation acknowledged and accepted.], fileID=DefaultFilegoodCaseIdentification, pillarID=Pillar-goodCaseIdentification, pillarChecksumSpec=<null>(default), timeToDeliver=org.bitrepository.bitrepositoryelements.TimeMeasureTYPE@4566ddd7[timeMeasureUnit=MILLISECONDS, timeMeasureValue=1000]]
        Step: Retrieve and validate the response getPillarID() the pillar.
      Test success: goodCaseIdentification
    Starting testcase ChecksumDatabaseMigrationTest
      Test starting: testMigratingChecksumDatabaseFromV3ToV4
        Description: Tests that the checksums table can be migrated from version 3 to 4, e.g. changing the column calculatedchecksumdate from timestamp to bigint.
        Step: Ensure cleanup
16:12:35.129 WARN  o.b.common.utils.FileUtils - Could not delete '/home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-reference-pillar/target/test/referencepillar/checksumdb-for-migration'
        Step: Unzipping and connecting to checksum database version 3
        Step: Validate setup
        Step: Ingest a entry to the database with a date for the calculationdate
        Step: Perform migration
16:12:36.244 WARN  o.b.service.database.DatabaseUtils - Migrating ChecksumDB from version 3 to 4.
        Step: Validate the migration
      Test success: testMigratingChecksumDatabaseFromV3ToV4
    Starting testcase GetChecksumsTest
        Added fixture: Initialize a new Pillar.
      Test starting: badCaseIdentification
        Description: Tests the identification for a GetChecksums operation on the pillar for the failure scenario, when the file is missing.
        Step: Set up constants and variables.
        Step: Setup for delivering pillar id and not having the file 
        Step: Create and send the identify request message.
          Result: Received message on TEST-TOPIC-badCaseIdentification-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForGetChecksumsResponse@15a55f69[correlationID=ddc27700-4fd9-4880-9732-fb5051f2115b, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseIdentification-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseIdentification-cibuild01-contributor, from=Pillar-badCaseIdentification, to=badCaseIdentification, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@ef5a84[responseCode=FILE_NOT_FOUND_FAILURE, responseText=File not found.], fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@4b5bd081[fileID=DefaultFilebadCaseIdentification, allFileIDs=<null>(default)], checksumRequestForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@7d017e4[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], pillarID=Pillar-badCaseIdentification, pillarChecksumSpec=<null>(default), timeToDeliver=<null>(default)]
        Step: Retrieve and validate the response getPillarID() the pillar.
      Test success: badCaseIdentification
        Added fixture: Initialize a new Pillar.
      Test starting: badCaseOperationNoFile
        Description: Tests the GetChecksums functionality of the pillar for the failure scenario, where it does not have the file.
        Step: Set up constants and variables.
        Step: Setup for not having the file
        Step: Create and send the actual GetChecksums message to the pillar.
16:12:38.437 WARN  o.b.p.m.GetChecksumsRequestHandler - The following file is missing 'DefaultFilebadCaseOperationNoFile' at collection 'TwoPillarCollection'.
          Result: Received message on TEST-TOPIC-badCaseOperationNoFile-cibuild01 : org.bitrepository.bitrepositorymessages.GetChecksumsFinalResponse@118c0c7e[correlationID=0f7bae78-e49b-4a8a-bcca-76dead92a26a, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseOperationNoFile-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationNoFile-cibuild01-contributor, from=Pillar-badCaseOperationNoFile, to=badCaseOperationNoFile, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@2282e7de[responseCode=FILE_NOT_FOUND_FAILURE, responseText=File not found.], pillarID=Pillar-badCaseOperationNoFile, checksumRequestForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@277040fb[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], resultingChecksums=<null>(default), partialResult=<null>(default)]
16:12:38.447 WARN  o.b.p.m.GetChecksumsRequestHandler - The following file is missing 'DefaultFilebadCaseOperationNoFile' at collection 'TwoPillarCollection'.
          Result: Received message on TEST-TOPIC-badCaseOperationNoFile-cibuild01 : org.bitrepository.bitrepositorymessages.GetChecksumsFinalResponse@60bd0862[correlationID=0f7bae78-e49b-4a8a-bcca-76dead92a26a, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseOperationNoFile-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationNoFile-cibuild01-contributor, from=Pillar-badCaseOperationNoFile, to=badCaseOperationNoFile, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@5534afbc[responseCode=FILE_NOT_FOUND_FAILURE, responseText=File not found.], pillarID=Pillar-badCaseOperationNoFile, checksumRequestForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@277040fb[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], resultingChecksums=<null>(default), partialResult=<null>(default)]
16:12:38.451 WARN  o.b.p.m.GetChecksumsRequestHandler - The following file is missing 'DefaultFilebadCaseOperationNoFile' at collection 'TwoPillarCollection'.
          Result: Received message on TEST-TOPIC-badCaseOperationNoFile-cibuild01 : org.bitrepository.bitrepositorymessages.GetChecksumsFinalResponse@679ba4a9[correlationID=0f7bae78-e49b-4a8a-bcca-76dead92a26a, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseOperationNoFile-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationNoFile-cibuild01-contributor, from=Pillar-badCaseOperationNoFile, to=badCaseOperationNoFile, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@6fed4e20[responseCode=FILE_NOT_FOUND_FAILURE, responseText=File not found.], pillarID=Pillar-badCaseOperationNoFile, checksumRequestForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@277040fb[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], resultingChecksums=<null>(default), partialResult=<null>(default)]
        Step: Retrieve the FinalResponse for the GetChecksums request
      Test success: badCaseOperationNoFile
          Result: The following messages haven't been handled by the testcase: 
org.bitrepository.bitrepositorymessages.GetChecksumsFinalResponse@60bd0862[correlationID=0f7bae78-e49b-4a8a-bcca-76dead92a26a, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseOperationNoFile-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationNoFile-cibuild01-contributor, from=Pillar-badCaseOperationNoFile, to=badCaseOperationNoFile, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@5534afbc[responseCode=FILE_NOT_FOUND_FAILURE, responseText=File not found.], pillarID=Pillar-badCaseOperationNoFile, checksumRequestForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@277040fb[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], resultingChecksums=<null>(default), partialResult=<null>(default)]
org.bitrepository.bitrepositorymessages.GetChecksumsFinalResponse@679ba4a9[correlationID=0f7bae78-e49b-4a8a-bcca-76dead92a26a, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseOperationNoFile-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationNoFile-cibuild01-contributor, from=Pillar-badCaseOperationNoFile, to=badCaseOperationNoFile, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@6fed4e20[responseCode=FILE_NOT_FOUND_FAILURE, responseText=File not found.], pillarID=Pillar-badCaseOperationNoFile, checksumRequestForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@277040fb[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], resultingChecksums=<null>(default), partialResult=<null>(default)]
16:12:39.462 WARN  o.b.protocol.bus.MessageReceiver - The following messages haven't been handled by the testcase: 
org.bitrepository.bitrepositorymessages.GetChecksumsFinalResponse@60bd0862[correlationID=0f7bae78-e49b-4a8a-bcca-76dead92a26a, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseOperationNoFile-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationNoFile-cibuild01-contributor, from=Pillar-badCaseOperationNoFile, to=badCaseOperationNoFile, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@5534afbc[responseCode=FILE_NOT_FOUND_FAILURE, responseText=File not found.], pillarID=Pillar-badCaseOperationNoFile, checksumRequestForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@277040fb[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], resultingChecksums=<null>(default), partialResult=<null>(default)]
org.bitrepository.bitrepositorymessages.GetChecksumsFinalResponse@679ba4a9[correlationID=0f7bae78-e49b-4a8a-bcca-76dead92a26a, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseOperationNoFile-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationNoFile-cibuild01-contributor, from=Pillar-badCaseOperationNoFile, to=badCaseOperationNoFile, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@6fed4e20[responseCode=FILE_NOT_FOUND_FAILURE, responseText=File not found.], pillarID=Pillar-badCaseOperationNoFile, checksumRequestForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@277040fb[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], resultingChecksums=<null>(default), partialResult=<null>(default)]
        Added fixture: Initialize a new Pillar.
      Test starting: goodCaseIdentification
        Description: Tests the identification for a GetChecksums operation on the pillar for the successful scenario.
        Step: Set up constants and variables.
        Step: Setup for having the file and delivering pillar id
        Step: Create and send the identify request message.
          Result: Received message on TEST-TOPIC-goodCaseIdentification-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForGetChecksumsResponse@6e28f079[correlationID=85dbfb87-e57d-4659-a8a9-acc6a887e10c, collectionID=TwoPillarCollection, destination=TEST-TOPIC-goodCaseIdentification-cibuild01, replyTo=TEST-TOPIC-Pillar-goodCaseIdentification-cibuild01-contributor, from=Pillar-goodCaseIdentification, to=goodCaseIdentification, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@1d3a324c[responseCode=IDENTIFICATION_POSITIVE, responseText=Operation acknowledged and accepted.], fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@29fa8805[fileID=DefaultFilegoodCaseIdentification, allFileIDs=<null>(default)], checksumRequestForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@4bc502be[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], pillarID=Pillar-goodCaseIdentification, pillarChecksumSpec=<null>(default), timeToDeliver=org.bitrepository.bitrepositoryelements.TimeMeasureTYPE@62479887[timeMeasureUnit=MILLISECONDS, timeMeasureValue=1000]]
        Step: Retrieve and validate the response getPillarID() the pillar.
      Test success: goodCaseIdentification
        Added fixture: Initialize a new Pillar.
      Test starting: goodCaseOperationAllFiles
        Description: Tests the GetChecksums operation on the pillar for the successful scenario, when requesting all files.
        Step: Set up constants and variables.
        Step: Setup for having the file and delivering result-set
        Step: Create and send the actual GetChecksums message to the pillar.
          Result: Received message on TEST-TOPIC-goodCaseOperationAllFiles-cibuild01 : org.bitrepository.bitrepositorymessages.GetChecksumsProgressResponse@dfaff72[correlationID=d5d94f50-9ce2-4198-9d7a-da8a03a9f878, collectionID=TwoPillarCollection, destination=TEST-TOPIC-goodCaseOperationAllFiles-cibuild01, replyTo=TEST-TOPIC-Pillar-goodCaseOperationAllFiles-cibuild01-contributor, from=Pillar-goodCaseOperationAllFiles, to=goodCaseOperationAllFiles, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@6c79d49f[responseCode=OPERATION_ACCEPTED_PROGRESS, responseText=Starting to calculate checksums.], pillarID=Pillar-goodCaseOperationAllFiles, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@6f08a190[fileID=<null>(default), allFileIDs=true], checksumRequestForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@d74d5e5[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], resultAddress=<null>(default)]
          Result: Received message on TEST-TOPIC-goodCaseOperationAllFiles-cibuild01 : org.bitrepository.bitrepositorymessages.GetChecksumsFinalResponse@f95024[correlationID=d5d94f50-9ce2-4198-9d7a-da8a03a9f878, collectionID=TwoPillarCollection, destination=TEST-TOPIC-goodCaseOperationAllFiles-cibuild01, replyTo=TEST-TOPIC-Pillar-goodCaseOperationAllFiles-cibuild01-contributor, from=Pillar-goodCaseOperationAllFiles, to=goodCaseOperationAllFiles, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@752aec1c[responseCode=OPERATION_COMPLETED, responseText=<null>(default)], pillarID=Pillar-goodCaseOperationAllFiles, checksumRequestForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@d74d5e5[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], resultingChecksums=org.bitrepository.bitrepositoryelements.ResultingChecksums@3e5dd97d[resultAddress=<null>(default), checksumDataItems={org.bitrepository.bitrepositoryelements.ChecksumDataForChecksumSpecTYPE@5b1fe0e7[fileID=DefaultFile, checksumValue={18,52,-52,-52,-52,-52,67,33}, calculationTimestamp=2017-03-02T16:12:41.299+01:00],org.bitrepository.bitrepositoryelements.ChecksumDataForChecksumSpecTYPE@11ade3d0[fileID=goodCaseOperationAllFiles-cibuild01--Test-File-1488467561276, checksumValue={18,52,-52,-52,-52,-52,67,34}, calculationTimestamp=1970-01-01T01:00:00.000+01:00]}], partialResult=false]
        Step: Retrieve the ProgressResponse for the GetChecksums request
        Step: Retrieve the FinalResponse for the GetChecksums request
      Test success: goodCaseOperationAllFiles
        Added fixture: Initialize a new Pillar.
      Test starting: goodCaseOperationSingleFile
        Description: Tests the GetChecksums operation on the pillar for the successful scenario when requesting one specific file.
        Step: Set up constants and variables.
        Step: Setup for having the file and delivering result-set
        Step: Create and send the actual GetChecksums message to the pillar.
          Result: Received message on TEST-TOPIC-goodCaseOperationSingleFile-cibuild01 : org.bitrepository.bitrepositorymessages.GetChecksumsProgressResponse@191fb52e[correlationID=acba1a76-5b44-4d63-a587-5546e70c9613, collectionID=TwoPillarCollection, destination=TEST-TOPIC-goodCaseOperationSingleFile-cibuild01, replyTo=TEST-TOPIC-Pillar-goodCaseOperationSingleFile-cibuild01-contributor, from=Pillar-goodCaseOperationSingleFile, to=goodCaseOperationSingleFile, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@14500290[responseCode=OPERATION_ACCEPTED_PROGRESS, responseText=Starting to calculate checksums.], pillarID=Pillar-goodCaseOperationSingleFile, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@498255bf[fileID=DefaultFilegoodCaseOperationSingleFile, allFileIDs=<null>(default)], checksumRequestForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@75223acf[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], resultAddress=<null>(default)]
          Result: Received message on TEST-TOPIC-goodCaseOperationSingleFile-cibuild01 : org.bitrepository.bitrepositorymessages.GetChecksumsFinalResponse@11705780[correlationID=acba1a76-5b44-4d63-a587-5546e70c9613, collectionID=TwoPillarCollection, destination=TEST-TOPIC-goodCaseOperationSingleFile-cibuild01, replyTo=TEST-TOPIC-Pillar-goodCaseOperationSingleFile-cibuild01-contributor, from=Pillar-goodCaseOperationSingleFile, to=goodCaseOperationSingleFile, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@5a093bc[responseCode=OPERATION_COMPLETED, responseText=<null>(default)], pillarID=Pillar-goodCaseOperationSingleFile, checksumRequestForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@75223acf[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], resultingChecksums=org.bitrepository.bitrepositoryelements.ResultingChecksums@5ed4011a[resultAddress=<null>(default), checksumDataItems={org.bitrepository.bitrepositoryelements.ChecksumDataForChecksumSpecTYPE@3ac4ac4d[fileID=DefaultFilegoodCaseOperationSingleFile, checksumValue={18,52,-52,-52,-52,-52,67,33}, calculationTimestamp=2017-03-02T16:12:41.767+01:00]}], partialResult=false]
        Step: Retrieve the ProgressResponse for the GetChecksums request
        Step: Retrieve the FinalResponse for the GetChecksums request
      Test success: goodCaseOperationSingleFile
        Added fixture: Initialize a new Pillar.
      Test starting: testRestrictions
        Description: Tests that the restrictions are correctly passed on to the cache.
        Step: Set up constants and variables.
        Step: Setup for only delivering result-set when the correct restrictions are given.
        Step: Create and send the actual GetChecksums message to the pillar.
          Result: Received message on TEST-TOPIC-testRestrictions-cibuild01 : org.bitrepository.bitrepositorymessages.GetChecksumsProgressResponse@1eeef2a5[correlationID=ad238fa9-a599-4c8a-bb66-51c65b834f31, collectionID=TwoPillarCollection, destination=TEST-TOPIC-testRestrictions-cibuild01, replyTo=TEST-TOPIC-Pillar-testRestrictions-cibuild01-contributor, from=Pillar-testRestrictions, to=testRestrictions, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@a08fcfa[responseCode=OPERATION_ACCEPTED_PROGRESS, responseText=Starting to calculate checksums.], pillarID=Pillar-testRestrictions, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@3d32399a[fileID=<null>(default), allFileIDs=true], checksumRequestForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@6d279b2c[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], resultAddress=<null>(default)]
          Result: Received message on TEST-TOPIC-testRestrictions-cibuild01 : org.bitrepository.bitrepositorymessages.GetChecksumsFinalResponse@4b527f7[correlationID=ad238fa9-a599-4c8a-bb66-51c65b834f31, collectionID=TwoPillarCollection, destination=TEST-TOPIC-testRestrictions-cibuild01, replyTo=TEST-TOPIC-Pillar-testRestrictions-cibuild01-contributor, from=Pillar-testRestrictions, to=testRestrictions, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@4917e4b7[responseCode=OPERATION_COMPLETED, responseText=<null>(default)], pillarID=Pillar-testRestrictions, checksumRequestForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@6d279b2c[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], resultingChecksums=org.bitrepository.bitrepositoryelements.ResultingChecksums@65c5fae6[resultAddress=<null>(default), checksumDataItems={org.bitrepository.bitrepositoryelements.ChecksumDataForChecksumSpecTYPE@34eaf389[fileID=DefaultFile, checksumValue={18,52,-52,-52,-52,-52,67,33}, calculationTimestamp=2017-03-02T16:12:42.192+01:00]}], partialResult=false]
        Step: Retrieve the ProgressResponse for the GetChecksums request
        Step: Retrieve the FinalResponse for the GetChecksums request
      Test success: testRestrictions
      Finished testcase
  Finished suite
Finished project
Tests run: 72, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 90.204 sec - in TestSuite

Results :

Tests run: 72, Failures: 0, Errors: 0, Skipped: 0

[JENKINS] Recording test results
[INFO] 
[INFO] --- jacoco-maven-plugin:0.7.5.201505241946:report (report) @ bitrepository-reference-pillar ---
[INFO] Analyzed bundle 'Bitrepository Reference Pillar' with 43 classes
[INFO] 
[INFO] --- maven-jar-plugin:2.4:jar (default-jar) @ bitrepository-reference-pillar ---
[INFO] Building jar: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-reference-pillar/target/bitrepository-reference-pillar-1.9-SNAPSHOT.jar
[INFO] 
[INFO] --- maven-jar-plugin:2.4:test-jar (default) @ bitrepository-reference-pillar ---
[INFO] Building jar: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-reference-pillar/target/bitrepository-reference-pillar-1.9-SNAPSHOT-tests.jar
[INFO] 
[INFO] --- maven-source-plugin:2.2.1:jar-no-fork (attach-sources-no-fork) @ bitrepository-reference-pillar ---
[INFO] Building jar: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-reference-pillar/target/bitrepository-reference-pillar-1.9-SNAPSHOT-sources.jar
[INFO] 
[INFO] --- maven-assembly-plugin:2.4:single (distribution) @ bitrepository-reference-pillar ---
[INFO] Reading assembly descriptor: src/main/assembly/assembly.xml
[INFO] Reading assembly descriptor: src/test/assembly/assembly.xml
[INFO] Reading assembly descriptor: src/main/assembly/deploy-assembly.xml
[INFO] Reading assembly descriptor: src/test/assembly/test-deploy-assembly.xml
[INFO] Building tar: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-reference-pillar/target/bitrepository-reference-pillar-1.9-SNAPSHOT-distribution.tar.gz
[INFO] Building tar: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-reference-pillar/target/bitrepository-reference-pillar-1.9-SNAPSHOT-acceptance-test.tar.gz
[WARNING] Entry: bitrepository-reference-pillar-1.9-SNAPSHOT/lib/bitrepository-reference-pillar-1.9-SNAPSHOT-tests.jar longer than 100 characters.
[WARNING] Resulting tar file can only be processed successfully by GNU compatible tar commands
[INFO] Building tar: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-reference-pillar/target/bitrepository-reference-pillar-1.9-SNAPSHOT-deploy.tar.gz
[INFO] Building tar: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-reference-pillar/target/bitrepository-reference-pillar-1.9-SNAPSHOT-acceptance-test-deploy.tar.gz
[INFO] 
[INFO] --- maven-install-plugin:2.5.1:install (default-install) @ bitrepository-reference-pillar ---
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-reference-pillar/target/bitrepository-reference-pillar-1.9-SNAPSHOT.jar to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-SNAPSHOT.jar
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-reference-pillar/pom.xml to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-SNAPSHOT.pom
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-reference-pillar/target/bitrepository-reference-pillar-1.9-SNAPSHOT-tests.jar to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-SNAPSHOT-tests.jar
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-reference-pillar/target/bitrepository-reference-pillar-1.9-SNAPSHOT-sources.jar to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-SNAPSHOT-sources.jar
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-reference-pillar/target/bitrepository-reference-pillar-1.9-SNAPSHOT-distribution.tar.gz to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-SNAPSHOT-distribution.tar.gz
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-reference-pillar/target/bitrepository-reference-pillar-1.9-SNAPSHOT-acceptance-test.tar.gz to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-SNAPSHOT-acceptance-test.tar.gz
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-reference-pillar/target/bitrepository-reference-pillar-1.9-SNAPSHOT-deploy.tar.gz to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-SNAPSHOT-deploy.tar.gz
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-reference-pillar/target/bitrepository-reference-pillar-1.9-SNAPSHOT-acceptance-test-deploy.tar.gz to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-SNAPSHOT-acceptance-test-deploy.tar.gz
[INFO] 
[INFO] --- maven-deploy-plugin:2.8.1:deploy (default-deploy) @ bitrepository-reference-pillar ---
[INFO] Downloading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Downloaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/maven-metadata.xml (3 KB at 62.7 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-20170302.151252-17.jar
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-20170302.151252-17.jar (128 KB at 1960.6 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-20170302.151252-17.pom
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-20170302.151252-17.pom (8 KB at 169.3 KB/sec)
[INFO] Downloading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/maven-metadata.xml
[INFO] Downloaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/maven-metadata.xml (455 B at 20.2 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/maven-metadata.xml (3 KB at 35.1 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/maven-metadata.xml (455 B at 9.9 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-20170302.151252-17-tests.jar
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-20170302.151252-17-tests.jar (238 KB at 3012.2 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/maven-metadata.xml (3 KB at 44.0 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-20170302.151252-17-sources.jar
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-20170302.151252-17-sources.jar (104 KB at 1399.3 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/maven-metadata.xml (3 KB at 66.8 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-20170302.151252-17-distribution.tar.gz
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-20170302.151252-17-distribution.tar.gz (13314 KB at 7025.6 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/maven-metadata.xml (3 KB at 59.1 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-20170302.151252-17-acceptance-test.tar.gz
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-20170302.151252-17-acceptance-test.tar.gz (12949 KB at 8441.1 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/maven-metadata.xml (3 KB at 62.7 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-20170302.151252-17-deploy.tar.gz
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-20170302.151252-17-deploy.tar.gz (4 KB at 110.0 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/maven-metadata.xml (3 KB at 86.2 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-20170302.151252-17-acceptance-test-deploy.tar.gz
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-20170302.151252-17-acceptance-test-deploy.tar.gz (4 KB at 86.9 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/maven-metadata.xml (3 KB at 60.9 KB/sec)
[JENKINS] Archiving disabled
[INFO]                                                                         
[INFO] ------------------------------------------------------------------------
[INFO] Building Bitrepository Monitoring Service 1.9-SNAPSHOT
[INFO] ------------------------------------------------------------------------
[INFO] 
[INFO] --- maven-clean-plugin:2.5:clean (default-clean) @ bitrepository-monitoring-service ---
[INFO] Deleting /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-monitoring-service/target
[INFO] 
[INFO] --- jacoco-maven-plugin:0.7.5.201505241946:prepare-agent (default) @ bitrepository-monitoring-service ---
[INFO] argLine set to -javaagent:/home/cibuild01/.m2/repository/org/jacoco/org.jacoco.agent/0.7.5.201505241946/org.jacoco.agent-0.7.5.201505241946-runtime.jar=destfile=/home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-monitoring-service/target/jacoco.exec
[INFO] 
[INFO] --- maven-resources-plugin:2.6:resources (default-resources) @ bitrepository-monitoring-service ---
[INFO] Using 'UTF-8' encoding to copy filtered resources.
[INFO] skip non existing resourceDirectory /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-monitoring-service/src/main/resources
[INFO] 
[INFO] --- maven-compiler-plugin:3.1:compile (default-compile) @ bitrepository-monitoring-service ---
[INFO] Changes detected - recompiling the module!
[INFO] Compiling 14 source files to /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-monitoring-service/target/classes
[INFO] 
[INFO] --- maven-resources-plugin:2.6:testResources (default-testResources) @ bitrepository-monitoring-service ---
[INFO] Using 'UTF-8' encoding to copy filtered resources.
[INFO] skip non existing resourceDirectory /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-monitoring-service/src/test/resources
[INFO] 
[INFO] --- maven-compiler-plugin:3.1:testCompile (default-testCompile) @ bitrepository-monitoring-service ---
[INFO] Changes detected - recompiling the module!
[INFO] Compiling 7 source files to /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-monitoring-service/target/test-classes
[INFO] 
[INFO] --- maven-surefire-plugin:2.17:test (default-test) @ bitrepository-monitoring-service ---
[INFO] Surefire report directory: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-monitoring-service/target/surefire-reports

-------------------------------------------------------
 T E S T S
-------------------------------------------------------
Running TestSuite
Configuring TestNG with: TestNG652Configurator
Starting test project Core module test
  Suite: Surefire suite
    Starting testcase StatusEventHandlerTest
      Test starting: testStatusEventHandler
        Description: Test the GetStatusEventHandler handling of events
        Step: Setup
        Step: Validate initial calls to the mocks
        Step: Test an unhandled event.
        Step: Test the Complete event
        Step: Test the Failed event
        Step: Test the component complete status
      Test success: testStatusEventHandler
    Starting testcase StatusCollectorTest
      Test starting: testStatusCollector
        Description: Tests the status collector.
        Step: Setup
        Step: Create the collector
        Step: Start the collector
        Step: wait 2 * the interval
        Step: wait the interval + delay again
      Test success: testStatusCollector
    Starting testcase ComponentStatusStoreTest
      Test starting: testComponentStatus
        Description: Tests the compontent status
        Step: Setup
        Step: Validate the initial content
        Step: Update the replay counts and validate 
        Step: Test what happens when an invalid component id attempted to be updated.
16:13:11.014 WARN  o.b.m.status.ComponentStatusStore - Got status from an unexpected component: BAD-COMPONENT-ID
        Step: Try giving it a positive status
      Test success: testComponentStatus
    Starting testcase MonitorAlerterTest
      Test starting: testMonitorAlerter
        Description: Tests the org.bitrepository.monitoringservice.alarm.BasicMonitoringServiceAlerter
        Step: Setup
        Step: Create the alerter, but ignore the part of actually sending the alarms. Just log it.
        Step: Check statuses with an empty map.
        Step: Check the status when a positive entry exists.
        Step: Check the status when a negative entry exists.
16:13:13.715 WARN  o.b.m.a.BasicMonitoringServiceAlerter - Sending alarm: org.bitrepository.bitrepositoryelements.Alarm@4efb13f1[origDateTime=2017-03-02T16:13:13.666+01:00, alarmCode=COMPONENT_FAILURE, alarmRaiser=MonitorAlerterUnderTest, alarmText=The following components have become unresponsive: [TestMonitorService], fileID=<null>(default), collectionID=<null>(default)]
          Result: Received message on TEST-ALARM-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.AlarmMessage@54b44879[correlationID=052159ff-d390-4af6-855c-d88ef006438f, collectionID=<null>(default), destination=TEST-ALARM-TOPIC-cibuild01, replyTo=TEST-TOPIC-MonitorAlerterUnderTest-cibuild01-contributor, from=MonitorAlerterUnderTest, to=<null>(default), version=30, minVersion=24, alarm=org.bitrepository.bitrepositoryelements.Alarm@4efb13f1[origDateTime=2017-03-02T16:13:13.666+01:00, alarmCode=COMPONENT_FAILURE, alarmRaiser=MonitorAlerterUnderTest, alarmText=The following components have become unresponsive: [TestMonitorService], fileID=<null>(default), collectionID=<null>(default)]]
      Test success: testMonitorAlerter
      Finished testcase
  Finished suite
Finished project
Tests run: 4, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 12.297 sec - in TestSuite

Results :

Tests run: 4, Failures: 0, Errors: 0, Skipped: 0

[JENKINS] Recording test results
[INFO] 
[INFO] --- jacoco-maven-plugin:0.7.5.201505241946:report (report) @ bitrepository-monitoring-service ---
[INFO] Analyzed bundle 'Bitrepository Monitoring Service' with 14 classes
[INFO] 
[INFO] --- maven-war-plugin:2.4:war (default-war) @ bitrepository-monitoring-service ---
[INFO] Packaging webapp
[INFO] Assembling webapp [bitrepository-monitoring-service] in [/home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-monitoring-service/target/bitrepository-monitoring-service-1.9-SNAPSHOT]
[INFO] Processing war project
[INFO] Copying webapp resources [/home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-monitoring-service/src/main/webapp]
[INFO] Webapp assembled in [230 msecs]
[INFO] Building war: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-monitoring-service/target/bitrepository-monitoring-service-1.9-SNAPSHOT.war
[INFO] 
[INFO] --- maven-jar-plugin:2.4:test-jar (default) @ bitrepository-monitoring-service ---
[INFO] Building jar: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-monitoring-service/target/bitrepository-monitoring-service-1.9-SNAPSHOT-tests.jar
[INFO] 
[INFO] --- maven-source-plugin:2.2.1:jar-no-fork (attach-sources-no-fork) @ bitrepository-monitoring-service ---
[INFO] Building jar: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-monitoring-service/target/bitrepository-monitoring-service-1.9-SNAPSHOT-sources.jar
[INFO] 
[INFO] --- maven-assembly-plugin:2.4:single (distribution) @ bitrepository-monitoring-service ---
[INFO] Reading assembly descriptor: src/main/assembly/assembly.xml
[INFO] Building tar: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-monitoring-service/target/bitrepository-monitoring-service-1.9-SNAPSHOT-distribution.tar.gz
[INFO] 
[INFO] --- maven-install-plugin:2.5.1:install (default-install) @ bitrepository-monitoring-service ---
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-monitoring-service/target/bitrepository-monitoring-service-1.9-SNAPSHOT.war to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/bitrepository-monitoring-service-1.9-SNAPSHOT.war
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-monitoring-service/pom.xml to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/bitrepository-monitoring-service-1.9-SNAPSHOT.pom
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-monitoring-service/target/bitrepository-monitoring-service-1.9-SNAPSHOT-tests.jar to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/bitrepository-monitoring-service-1.9-SNAPSHOT-tests.jar
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-monitoring-service/target/bitrepository-monitoring-service-1.9-SNAPSHOT-sources.jar to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/bitrepository-monitoring-service-1.9-SNAPSHOT-sources.jar
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-monitoring-service/target/bitrepository-monitoring-service-1.9-SNAPSHOT-distribution.tar.gz to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/bitrepository-monitoring-service-1.9-SNAPSHOT-distribution.tar.gz
[INFO] 
[INFO] --- maven-deploy-plugin:2.8.1:deploy (default-deploy) @ bitrepository-monitoring-service ---
[INFO] Downloading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Downloaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/maven-metadata.xml (2 KB at 42.9 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/bitrepository-monitoring-service-1.9-20170302.151322-17.war
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/bitrepository-monitoring-service-1.9-20170302.151322-17.war (18063 KB at 7535.6 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/bitrepository-monitoring-service-1.9-20170302.151322-17.pom
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/bitrepository-monitoring-service-1.9-20170302.151322-17.pom (4 KB at 69.2 KB/sec)
[INFO] Downloading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/maven-metadata.xml
[INFO] Downloaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/maven-metadata.xml (457 B at 21.3 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/maven-metadata.xml (2 KB at 38.3 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/maven-metadata.xml (457 B at 14.4 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/bitrepository-monitoring-service-1.9-20170302.151322-17-tests.jar
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/bitrepository-monitoring-service-1.9-20170302.151322-17-tests.jar (15 KB at 329.9 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/maven-metadata.xml (2 KB at 47.2 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/bitrepository-monitoring-service-1.9-20170302.151322-17-sources.jar
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/bitrepository-monitoring-service-1.9-20170302.151322-17-sources.jar (19 KB at 425.4 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/maven-metadata.xml (2 KB at 39.4 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/bitrepository-monitoring-service-1.9-20170302.151322-17-distribution.tar.gz
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/bitrepository-monitoring-service-1.9-20170302.151322-17-distribution.tar.gz (18061 KB at 9596.5 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/maven-metadata.xml (2 KB at 47.2 KB/sec)
[JENKINS] Archiving disabled
[INFO]                                                                         
[INFO] ------------------------------------------------------------------------
[INFO] Building Bitrepository Webclient 1.9-SNAPSHOT
[INFO] ------------------------------------------------------------------------
[INFO] 
[INFO] --- maven-clean-plugin:2.5:clean (default-clean) @ bitrepository-webclient ---
[INFO] Deleting /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-webclient/target
[INFO] 
[INFO] --- jacoco-maven-plugin:0.7.5.201505241946:prepare-agent (default) @ bitrepository-webclient ---
[INFO] argLine set to -javaagent:/home/cibuild01/.m2/repository/org/jacoco/org.jacoco.agent/0.7.5.201505241946/org.jacoco.agent-0.7.5.201505241946-runtime.jar=destfile=/home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-webclient/target/jacoco.exec
[INFO] 
[INFO] --- maven-resources-plugin:2.6:resources (default-resources) @ bitrepository-webclient ---
[INFO] Using 'UTF-8' encoding to copy filtered resources.
[INFO] Copying 2 resources
[INFO] 
[INFO] --- maven-compiler-plugin:3.1:compile (default-compile) @ bitrepository-webclient ---
[INFO] Changes detected - recompiling the module!
[INFO] Compiling 12 source files to /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-webclient/target/classes
[INFO] 
[INFO] --- maven-resources-plugin:2.6:testResources (default-testResources) @ bitrepository-webclient ---
[INFO] Using 'UTF-8' encoding to copy filtered resources.
[INFO] skip non existing resourceDirectory /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-webclient/src/test/resources
[INFO] 
[INFO] --- maven-compiler-plugin:3.1:testCompile (default-testCompile) @ bitrepository-webclient ---
[INFO] No sources to compile
[INFO] 
[INFO] --- maven-surefire-plugin:2.17:test (default-test) @ bitrepository-webclient ---
[INFO] No tests to run.
[JENKINS] Recording test results[INFO] 
[INFO] --- jacoco-maven-plugin:0.7.5.201505241946:report (report) @ bitrepository-webclient ---
[INFO] Skipping JaCoCo execution due to missing execution data file:/home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-webclient/target/jacoco.exec

[INFO] 
[INFO] --- maven-war-plugin:2.4:war (default-war) @ bitrepository-webclient ---
[INFO] Packaging webapp
[INFO] Assembling webapp [bitrepository-webclient] in [/home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-webclient/target/bitrepository-webclient-1.9-SNAPSHOT]
[INFO] Processing war project
[INFO] Copying webapp webResources [/home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-webclient/src/main/webapp] to [/home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-webclient/target/bitrepository-webclient-1.9-SNAPSHOT]
[INFO] Copying webapp resources [/home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-webclient/src/main/webapp]
[INFO] Webapp assembled in [922 msecs]
[INFO] Building war: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-webclient/target/bitrepository-webclient-1.9-SNAPSHOT.war
[INFO] 
[INFO] --- maven-jar-plugin:2.4:test-jar (default) @ bitrepository-webclient ---
[WARNING] JAR will be empty - no content was marked for inclusion!
[INFO] Building jar: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-webclient/target/bitrepository-webclient-1.9-SNAPSHOT-tests.jar
[INFO] 
[INFO] --- maven-source-plugin:2.2.1:jar-no-fork (attach-sources-no-fork) @ bitrepository-webclient ---
[INFO] Building jar: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-webclient/target/bitrepository-webclient-1.9-SNAPSHOT-sources.jar
[INFO] 
[INFO] --- maven-assembly-plugin:2.4:single (distribution) @ bitrepository-webclient ---
[INFO] Reading assembly descriptor: src/main/assembly/assembly.xml
[INFO] Building tar: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-webclient/target/bitrepository-webclient-1.9-SNAPSHOT-distribution.tar.gz
[INFO] 
[INFO] --- maven-install-plugin:2.5.1:install (default-install) @ bitrepository-webclient ---
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-webclient/target/bitrepository-webclient-1.9-SNAPSHOT.war to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/bitrepository-webclient-1.9-SNAPSHOT.war
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-webclient/pom.xml to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/bitrepository-webclient-1.9-SNAPSHOT.pom
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-webclient/target/bitrepository-webclient-1.9-SNAPSHOT-tests.jar to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/bitrepository-webclient-1.9-SNAPSHOT-tests.jar
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-webclient/target/bitrepository-webclient-1.9-SNAPSHOT-sources.jar to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/bitrepository-webclient-1.9-SNAPSHOT-sources.jar
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-webclient/target/bitrepository-webclient-1.9-SNAPSHOT-distribution.tar.gz to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/bitrepository-webclient-1.9-SNAPSHOT-distribution.tar.gz
[INFO] 
[INFO] --- maven-deploy-plugin:2.8.1:deploy (default-deploy) @ bitrepository-webclient ---
[INFO] Downloading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Downloaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/maven-metadata.xml (2 KB at 24.3 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/bitrepository-webclient-1.9-20170302.151334-17.war
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/bitrepository-webclient-1.9-20170302.151334-17.war (12468 KB at 6537.6 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/bitrepository-webclient-1.9-20170302.151334-17.pom
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/bitrepository-webclient-1.9-20170302.151334-17.pom (3 KB at 77.2 KB/sec)
[INFO] Downloading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/maven-metadata.xml
[INFO] Downloaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/maven-metadata.xml (448 B at 15.1 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/maven-metadata.xml (2 KB at 35.2 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/maven-metadata.xml (448 B at 13.7 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/bitrepository-webclient-1.9-20170302.151334-17-tests.jar
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/bitrepository-webclient-1.9-20170302.151334-17-tests.jar (3 KB at 53.8 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/maven-metadata.xml (2 KB at 39.1 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/bitrepository-webclient-1.9-20170302.151334-17-sources.jar
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/bitrepository-webclient-1.9-20170302.151334-17-sources.jar (17 KB at 478.3 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/maven-metadata.xml (2 KB at 48.6 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/bitrepository-webclient-1.9-20170302.151334-17-distribution.tar.gz
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/bitrepository-webclient-1.9-20170302.151334-17-distribution.tar.gz (12463 KB at 4551.6 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/maven-metadata.xml (2 KB at 31.3 KB/sec)
[JENKINS] Archiving disabled
[INFO]                                                                         
[INFO] ------------------------------------------------------------------------
[INFO] Building Bitrepository Integration 1.9-SNAPSHOT
[INFO] ------------------------------------------------------------------------
[INFO] 
[INFO] --- maven-clean-plugin:2.5:clean (default-clean) @ bitrepository-integration ---
[INFO] Deleting /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-integration/target
[INFO] 
[INFO] --- jacoco-maven-plugin:0.7.5.201505241946:prepare-agent (default) @ bitrepository-integration ---
[INFO] argLine set to -javaagent:/home/cibuild01/.m2/repository/org/jacoco/org.jacoco.agent/0.7.5.201505241946/org.jacoco.agent-0.7.5.201505241946-runtime.jar=destfile=/home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-integration/target/jacoco.exec
[INFO] 
[INFO] --- maven-resources-plugin:2.6:resources (default-resources) @ bitrepository-integration ---
[INFO] Using 'UTF-8' encoding to copy filtered resources.
[INFO] Copying 33 resources
[INFO] 
[INFO] --- maven-compiler-plugin:3.1:compile (default-compile) @ bitrepository-integration ---
[INFO] No sources to compile
[INFO] 
[INFO] --- maven-resources-plugin:2.6:testResources (default-testResources) @ bitrepository-integration ---
[INFO] Using 'UTF-8' encoding to copy filtered resources.
[INFO] Copying 1 resource
[INFO] 
[INFO] --- maven-compiler-plugin:3.1:testCompile (default-testCompile) @ bitrepository-integration ---
[INFO] No sources to compile
[INFO] 
[INFO] --- maven-surefire-plugin:2.17:test (default-test) @ bitrepository-integration ---
[JENKINS] Recording test results[INFO] 
[INFO] --- jacoco-maven-plugin:0.7.5.201505241946:report (report) @ bitrepository-integration ---
[INFO] Skipping JaCoCo execution due to missing execution data file:/home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-integration/target/jacoco.exec

[INFO] 
[INFO] --- maven-jar-plugin:2.4:jar (default-jar) @ bitrepository-integration ---
[INFO] Building jar: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-integration/target/bitrepository-integration-1.9-SNAPSHOT.jar
[INFO] 
[INFO] --- maven-jar-plugin:2.4:test-jar (default) @ bitrepository-integration ---
[INFO] Building jar: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-integration/target/bitrepository-integration-1.9-SNAPSHOT-tests.jar
[INFO] 
[INFO] --- maven-source-plugin:2.2.1:jar-no-fork (attach-sources-no-fork) @ bitrepository-integration ---
[INFO] Building jar: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-integration/target/bitrepository-integration-1.9-SNAPSHOT-sources.jar
[INFO] 
[INFO] --- maven-assembly-plugin:2.4:single (make-assembly) @ bitrepository-integration ---
[INFO] Reading assembly descriptor: src/main/assembly/assembly.xml
[INFO] Reading assembly descriptor: src/main/assembly/tools-assembly.xml
[INFO] Building tar: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-integration/target/bitrepository-integration-1.9-SNAPSHOT-quickstart.tar.gz
[INFO] Building tar: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-integration/target/bitrepository-integration-1.9-SNAPSHOT-tools.tar.gz
[WARNING] Entry: bitrepository-integration-1.9-SNAPSHOT/lib/bitrepository-reference-pillar-1.9-SNAPSHOT-distribution.tar.gz longer than 100 characters.
[WARNING] Resulting tar file can only be processed successfully by GNU compatible tar commands
[INFO] 
[INFO] --- maven-install-plugin:2.5.1:install (default-install) @ bitrepository-integration ---
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-integration/target/bitrepository-integration-1.9-SNAPSHOT.jar to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/bitrepository-integration-1.9-SNAPSHOT.jar
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-integration/pom.xml to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/bitrepository-integration-1.9-SNAPSHOT.pom
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-integration/target/bitrepository-integration-1.9-SNAPSHOT-tests.jar to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/bitrepository-integration-1.9-SNAPSHOT-tests.jar
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-integration/target/bitrepository-integration-1.9-SNAPSHOT-sources.jar to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/bitrepository-integration-1.9-SNAPSHOT-sources.jar
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-integration/target/bitrepository-integration-1.9-SNAPSHOT-quickstart.tar.gz to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/bitrepository-integration-1.9-SNAPSHOT-quickstart.tar.gz
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-integration/target/bitrepository-integration-1.9-SNAPSHOT-tools.tar.gz to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/bitrepository-integration-1.9-SNAPSHOT-tools.tar.gz
[INFO] 
[INFO] --- maven-deploy-plugin:2.8.1:deploy (default-deploy) @ bitrepository-integration ---
[INFO] Downloading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Downloaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/maven-metadata.xml (2 KB at 73.5 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/bitrepository-integration-1.9-20170302.151416-17.jar
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/bitrepository-integration-1.9-20170302.151416-17.jar (33 KB at 548.5 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/bitrepository-integration-1.9-20170302.151416-17.pom
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/bitrepository-integration-1.9-20170302.151416-17.pom (4 KB at 89.0 KB/sec)
[INFO] Downloading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/maven-metadata.xml
[INFO] Downloaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/maven-metadata.xml (450 B at 11.3 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/maven-metadata.xml (2 KB at 59.9 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/maven-metadata.xml (450 B at 9.6 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/bitrepository-integration-1.9-20170302.151416-17-tests.jar
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/bitrepository-integration-1.9-20170302.151416-17-tests.jar (3 KB at 49.8 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/maven-metadata.xml (2 KB at 21.6 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/bitrepository-integration-1.9-20170302.151416-17-sources.jar
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/bitrepository-integration-1.9-20170302.151416-17-sources.jar (31 KB at 497.9 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/maven-metadata.xml (2 KB at 38.5 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/bitrepository-integration-1.9-20170302.151416-17-quickstart.tar.gz
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/bitrepository-integration-1.9-20170302.151416-17-quickstart.tar.gz (106368 KB at 9684.8 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/maven-metadata.xml (2 KB at 47.6 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/bitrepository-integration-1.9-20170302.151416-17-tools.tar.gz
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/bitrepository-integration-1.9-20170302.151416-17-tools.tar.gz (119626 KB at 8999.2 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/maven-metadata.xml (2 KB at 70.3 KB/sec)
[JENKINS] Archiving disabled
[JENKINS] Archiving disabled
[JENKINS] Archiving disabled
[JENKINS] Archiving disabled
[JENKINS] Archiving disabled
[JENKINS] Archiving disabled
[JENKINS] Archiving disabled
[JENKINS] Archiving disabled
[JENKINS] Archiving disabled
[JENKINS] Archiving disabled
[JENKINS] Archiving disabled
[JENKINS] Archiving disabled
[INFO] ------------------------------------------------------------------------
[INFO] Reactor Summary:
[INFO] 
[JENKINS] Archiving disabled
[INFO] Bitrepository ...................................... SUCCESS [ 10.260 s]
[INFO] Bitrepository Reference Settings ................... SUCCESS [ 14.906 s]
[INFO] Bitrepository Core ................................. SUCCESS [01:05 min]
[INFO] Bitrepository Client ............................... SUCCESS [01:47 min]
[INFO] Bitrepository Service .............................. SUCCESS [ 37.878 s]
[INFO] Bitrepository Integrity Service .................... SUCCESS [03:12 min]
[INFO] Bitrepository Alarm Service ........................ SUCCESS [ 30.269 s]
[INFO] Bitrepository Audit Trail Service .................. SUCCESS [01:07 min]
[INFO] Bitrepository Reference Pillar ..................... SUCCESS [01:51 min]
[INFO] Bitrepository Monitoring Service ................... SUCCESS [ 29.414 s]
[INFO] Bitrepository Webclient ............................ SUCCESS [ 12.586 s]
[INFO] Bitrepository Integration .......................... SUCCESS [01:01 min]
[INFO] ------------------------------------------------------------------------
[INFO] BUILD SUCCESS
[INFO] ------------------------------------------------------------------------
[INFO] Total time: 12:38 min
[INFO] Finished at: 2017-03-02T16:14:51+01:00
[INFO] Final Memory: 53M/150M
[INFO] ------------------------------------------------------------------------
channel stopped
Started indexing related Jira issue keys
Successfully indexed related Jira issue keys
Warning: you have no plugins providing access control for builds, so falling back to legacy behavior of permitting any downstream builds to be triggered
Triggering a new build of Bitrepository-deploy-ci-test
Finished: SUCCESS