SuccessConsole Output

Skipping 549 KB.. Full Log
    Step: Create file in both tmp, archive and retain directories.
        Step: Remove the file from archive and tmp
      Test success: testArchiveDirectoryRemoveFile
      Test starting: testArchiveDirectoryRemoveFolderFile
        Description: Testing the error scenarios when removing files from the archive.
        Step: Setup
        Step: Remove nonexisting file from archive
        Step: Remove nonexisting file from tmp
        Step: Create file in both tmp, archive and retain directories.
        Step: Remove the file from archive and tmp
      Test success: testArchiveDirectoryRemoveFolderFile
    Starting testcase ChecksumDatabaseTest
      Test starting: testChecksumDatabaseExtraction
        Description: Test the extraction of data from the checksum database.
        Step: Check whether the default entry exists.
        Step: Extract calculation date
        Step: Extract the checksum
        Step: Extract the whole entry
        Step: Extract all entries
      Test success: testChecksumDatabaseExtraction
      Test starting: testDeletion
        Description: Test that data can be deleted from the database.
        Step: Check whether the default entry exists.
        Step: Remove the default entry
      Test success: testDeletion
      Test starting: testExtractionOfMissingData
        Description: Test the handling of bad arguments.
        Step: Try to get the date of a wrong file id.
        Step: Try to get the date of a wrong file id.
        Step: Try to remove a bad file id
      Test success: testExtractionOfMissingData
      Test starting: testGetChecksumResult
        Description: Tests the restrictions on the GetChecksumResult call to the database.
        Step: Instantiate database with appropriate data.
        Step: Test with no time restrictions
        Step: Test with time restrictions from epoc to now
        Step: Test with very strict time restrictions around the default date
        Step: Test with too new a lower limit
        Step: Test with exact date as both upper and lower limit
        Step: Test with date limit from 1 millis before as lower and exact date a upper limit
        Step: Test with date limit from exact date as lower and 1 millis after date a upper limit
        Step: Test with too old an upper limit
      Test success: testGetChecksumResult
      Test starting: testGetFileIDsRestrictions
        Description: Tests the restrictions on the GetFileIDs call to the database.
        Step: Instantiate database with appropriate data.
        Step: Test with no time restrictions and 10000 max_results
        Step: Test with minimum-date earlier than first file
        Step: Test with maximum-date earlier than first file
        Step: Test with minimum-date set to later than second file.
        Step: Test with maximum-date set to later than second file.
        Step: Test with minimum-date set to middle date.
        Step: Test with maximum-date set to middle date.
        Step: Test with both minimum-date and maximum-date set to middle date.
        Step: Test the first file-id, with no other restrictions
        Step: Test the second file-id, with no other restrictions
        Step: Test the date for the first file-id, while requesting the second file-id
      Test success: testGetFileIDsRestrictions
      Test starting: testGetFileIDsWithOldChecksums
        Description: Tests the restrictions on the GetFileIDsWithOldChecksums call to the database.
        Step: Instantiate database with appropriate data.
        Step: Extract all entries with checksum date older than now
        Step: Extract all entries with checksum date older than epoch
        Step: Extract all entries with checksum date older than middle date
      Test success: testGetFileIDsWithOldChecksums
      Test starting: testReplacingExistingEntry
        Description: Test that an entry can be replaced by another in the database.
        Step: Check whether the default entry exists.
        Step: Replace the checksum and date
      Test success: testReplacingExistingEntry
      Test starting: testSpecifiedEntryExtraction
        Description: Test that specific entries can be extracted. Has two entries in the database: one for the current timestamp and one for the epoch.
        Step: Instantiate database with appropriate data.
        Step: Extract with out restrictions
        Step: Extract with a maximum of 1 entry
        Step: Extract all dates older than this tests instantiation
        Step: Extract all dates newer than this tests instantiation
        Step: Extract all dates older than the newest instance
        Step: Extract all dates newer than the oldest instantiation
      Test success: testSpecifiedEntryExtraction
    Starting testcase ChecksumPillarModelTest
      Test starting: testPillarModelBasicFunctionality
        Description: Test the basic functions of the full reference pillar model.
        Step: Check the pillar id in the pillar model
        Step: Ask whether it can handle a file of size 0
        Step: Ask whether it can handle a file of maximum size
        Step: Check the ChecksumPillarSpec
        Step: Checkum whether the checksum pillar should download
      Test success: testPillarModelBasicFunctionality
      Test starting: testPillarModelHasFile
        Description: Test that the file exists, when placed in the archive and cache
        Step: Setup
        Step: Check whether file exists and retrieve it.
        Step: Check whether file exists.
        Step: Ask for the checksum data for the file with different checksum specs
        Step: Ask for the checksum entry for the file with different checksum specs
        Step: Ask for the checksum for the file with different checksum specs
        Step: Check extraction of checksum result set
        Step: Check retrieval of non-default checksum
        Step: Check retrieval of non-default checksum result set
        Step: Test retrieval of single checksum result set
      Test success: testPillarModelHasFile
      Test starting: testPillarModelNoFile
        Description: Test that the file exists, when placed in the archive and cache
        Step: Setup
        Step: Check whether file exists and try to retrieve it.
        Step: Verify that anexceptions are thrown when verifying file existance.
      Test success: testPillarModelNoFile
    Starting testcase FullPillarModelTest
      Test starting: testPillarModelBasicFunctionality
        Description: Test the basic functions of the full reference pillar model.
        Step: Check the pillar id in the pillar model
        Step: Ask whether it can handle a file of size 0
        Step: Ask whether it can handle a file of maximum size
        Step: Check the ChecksumPillarSpec
      Test success: testPillarModelBasicFunctionality
      Test starting: testPillarModelHasFile
        Description: Test that the file exists, when placed in the archive and cache
        Step: Setup
        Step: Check whether file exists and retrieve it.
        Step: Verify that no exceptions are thrown when verifying file existance.
        Step: Check retrieval of non-default checksum
      Test success: testPillarModelHasFile
      Test starting: testPillarModelNoFile
        Description: Test that the file exists, when placed in the archive and cache
        Step: Setup
        Step: Check whether file exists and try to retrieve it.
        Step: Verify that anexceptions are thrown when verifying file existance.
15:33:38.152 WARN  o.b.pillar.store.FileStorageModel - The file 'DefaultFile' has been requested, but we do not have that file in collection 'TwoPillarCollection'!
      Test success: testPillarModelNoFile
    Starting testcase GeneralMessageHandlingTest
        Added fixture: Initialize a new Pillar.
      Test starting: testPillarMessageHandler
        Description: Test the handling of the PillarMessageHandler super-class.
        Step: Setup
        Step: Test the pillar ID
      Test success: testPillarMessageHandler
    Starting testcase GetAuditTrailsTest
        Added fixture: Initialize a new Pillar.
      Test starting: checksumPillarGetAuditTrailsMaximumNumberOfResults
        Description: Tests the GetAuditTrails functionality of the pillar for the successful scenario, where a limited number of audit trails are requested.
        Step: Set up constants and variables.
        Step: Send the request for the limited amount of audit trails to the pillar.
          Result: Received message on TEST-TOPIC-checksumPillarGetAuditTrailsMaximumNumberOfResults-cibuild01 : org.bitrepository.bitrepositorymessages.GetAuditTrailsProgressResponse@67e9ae8c[correlationID=937b59a0-6087-4359-8d90-e8adf6063b71, collectionID=TwoPillarCollection, destination=TEST-TOPIC-checksumPillarGetAuditTrailsMaximumNumberOfResults-cibuild01, replyTo=TEST-TOPIC-Pillar-checksumPillarGetAuditTrailsMaximumNumberOfResults-cibuild01-contributor, from=Pillar-checksumPillarGetAuditTrailsMaximumNumberOfResults, to=Pillar-checksumPillarGetAuditTrailsMaximumNumberOfResults, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@7b595de[responseCode=OPERATION_ACCEPTED_PROGRESS, responseText=Starting to extract the requested audit trails.], contributor=Pillar-checksumPillarGetAuditTrailsMaximumNumberOfResults, resultAddress=<null>(default)]
          Result: Received message on TEST-TOPIC-checksumPillarGetAuditTrailsMaximumNumberOfResults-cibuild01 : org.bitrepository.bitrepositorymessages.GetAuditTrailsFinalResponse@608d2806[correlationID=937b59a0-6087-4359-8d90-e8adf6063b71, collectionID=TwoPillarCollection, destination=TEST-TOPIC-checksumPillarGetAuditTrailsMaximumNumberOfResults-cibuild01, replyTo=TEST-TOPIC-Pillar-checksumPillarGetAuditTrailsMaximumNumberOfResults-cibuild01-contributor, from=Pillar-checksumPillarGetAuditTrailsMaximumNumberOfResults, to=Pillar-checksumPillarGetAuditTrailsMaximumNumberOfResults, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@30374f99[responseCode=OPERATION_COMPLETED, responseText=<null>(default)], contributor=Pillar-checksumPillarGetAuditTrailsMaximumNumberOfResults, resultingAuditTrails=org.bitrepository.bitrepositoryelements.ResultingAuditTrails@7150a0ed[resultAddress=<null>(default), auditTrailEvents=org.bitrepository.bitrepositoryelements.AuditTrailEvents@30e2e2c1[auditTrailEvent={org.bitrepository.bitrepositoryelements.AuditTrailEvent@392631c3[sequenceNumber=1, fileID=fileID1487687619387, reportingComponent=MOCK-AUDIT-MANAGER, actorOnFile=ACTOR, actionOnFile=CHECKSUM_CALCULATED, actionDateTime=2017-02-21T15:33:39.393+01:00, info=InFo, operationID=operationID, certificateID=certificateid, auditTrailInformation=auditTrails],org.bitrepository.bitrepositoryelements.AuditTrailEvent@3367faf9[sequenceNumber=2, fileID=fileID1487687619387, reportingComponent=MOCK-AUDIT-MANAGER, actorOnFile=ACTOR, actionOnFile=DELETE_FILE, actionDateTime=2017-02-21T15:33:39.393+01:00, info=InFo, operationID=operationID, certificateID=certificateid, auditTrailInformation=auditTrails],org.bitrepository.bitrepositoryelements.AuditTrailEvent@47c463b0[sequenceNumber=3, fileID=fileID1487687619387, reportingComponent=MOCK-AUDIT-MANAGER, actorOnFile=ACTOR, actionOnFile=FAILURE, actionDateTime=2017-02-21T15:33:39.393+01:00, info=InFo, operationID=operationID, certificateID=certificateid, auditTrailInformation=auditTrails],org.bitrepository.bitrepositoryelements.AuditTrailEvent@60176563[sequenceNumber=4, fileID=fileID1487687619387, reportingComponent=MOCK-AUDIT-MANAGER, actorOnFile=ACTOR, actionOnFile=FILE_MOVED, actionDateTime=2017-02-21T15:33:39.393+01:00, info=InFo, operationID=operationID, certificateID=certificateid, auditTrailInformation=auditTrails],org.bitrepository.bitrepositoryelements.AuditTrailEvent@68b7f88b[sequenceNumber=5, fileID=fileID1487687619387, reportingComponent=MOCK-AUDIT-MANAGER, actorOnFile=ACTOR, actionOnFile=GET_CHECKSUMS, actionDateTime=2017-02-21T15:33:39.394+01:00, info=InFo, operationID=operationID, certificateID=certificateid, auditTrailInformation=auditTrails]}]], partialResult=true]
        Step: Validate the final response
      Test success: checksumPillarGetAuditTrailsMaximumNumberOfResults
        Added fixture: Initialize a new Pillar.
      Test starting: checksumPillarGetAuditTrailsSpecificRequests
        Description: Tests the GetAuditTrails functionality of the pillar for the successful scenario, where a specific audit trail are requested.
        Step: Set up constants and variables.
        Step: Send the identification request
          Result: Received message on TEST-TOPIC-checksumPillarGetAuditTrailsSpecificRequests-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyContributorsForGetAuditTrailsResponse@5f901447[correlationID=8210a6ac-61fe-4b2c-960b-ce8546d4b1a4, collectionID=TwoPillarCollection, destination=TEST-TOPIC-checksumPillarGetAuditTrailsSpecificRequests-cibuild01, replyTo=TEST-TOPIC-Pillar-checksumPillarGetAuditTrailsSpecificRequests-cibuild01-contributor, from=Pillar-checksumPillarGetAuditTrailsSpecificRequests, to=Pillar-checksumPillarGetAuditTrailsSpecificRequests, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@37c9f521[responseCode=IDENTIFICATION_POSITIVE, responseText=<null>(default)]]
        Step: Retrieve and validate the response.
        Step: Make and send the request for the actual GetAuditTrails operation
          Result: Received message on TEST-TOPIC-checksumPillarGetAuditTrailsSpecificRequests-cibuild01 : org.bitrepository.bitrepositorymessages.GetAuditTrailsProgressResponse@5dbe891a[correlationID=8210a6ac-61fe-4b2c-960b-ce8546d4b1a4, collectionID=TwoPillarCollection, destination=TEST-TOPIC-checksumPillarGetAuditTrailsSpecificRequests-cibuild01, replyTo=TEST-TOPIC-Pillar-checksumPillarGetAuditTrailsSpecificRequests-cibuild01-contributor, from=Pillar-checksumPillarGetAuditTrailsSpecificRequests, to=Pillar-checksumPillarGetAuditTrailsSpecificRequests, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@2d38cc6[responseCode=OPERATION_ACCEPTED_PROGRESS, responseText=Starting to extract the requested audit trails.], contributor=Pillar-checksumPillarGetAuditTrailsSpecificRequests, resultAddress=<null>(default)]
          Result: Received message on TEST-TOPIC-checksumPillarGetAuditTrailsSpecificRequests-cibuild01 : org.bitrepository.bitrepositorymessages.GetAuditTrailsFinalResponse@7acb0140[correlationID=8210a6ac-61fe-4b2c-960b-ce8546d4b1a4, collectionID=TwoPillarCollection, destination=TEST-TOPIC-checksumPillarGetAuditTrailsSpecificRequests-cibuild01, replyTo=TEST-TOPIC-Pillar-checksumPillarGetAuditTrailsSpecificRequests-cibuild01-contributor, from=Pillar-checksumPillarGetAuditTrailsSpecificRequests, to=Pillar-checksumPillarGetAuditTrailsSpecificRequests, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@3f817fbe[responseCode=OPERATION_COMPLETED, responseText=<null>(default)], contributor=Pillar-checksumPillarGetAuditTrailsSpecificRequests, resultingAuditTrails=org.bitrepository.bitrepositoryelements.ResultingAuditTrails@165ed70d[resultAddress=<null>(default), auditTrailEvents=org.bitrepository.bitrepositoryelements.AuditTrailEvents@8f5dcbc[auditTrailEvent={org.bitrepository.bitrepositoryelements.AuditTrailEvent@2a961de3[sequenceNumber=1, fileID=fileID1487687619736, reportingComponent=MOCK-AUDIT-MANAGER, actorOnFile=ACTOR, actionOnFile=OTHER, actionDateTime=2017-02-21T15:33:39.736+01:00, info=InFo, operationID=operationID, certificateID=certificateid, auditTrailInformation=auditTrails]}]], partialResult=false]
        Step: Receive and validate the progress response.
        Step: Receive and validate the final response
        Step: Make another request, where both ingested audit trails is requested
          Result: Received message on TEST-TOPIC-checksumPillarGetAuditTrailsSpecificRequests-cibuild01 : org.bitrepository.bitrepositorymessages.GetAuditTrailsProgressResponse@1edefb80[correlationID=8210a6ac-61fe-4b2c-960b-ce8546d4b1a4, collectionID=TwoPillarCollection, destination=TEST-TOPIC-checksumPillarGetAuditTrailsSpecificRequests-cibuild01, replyTo=TEST-TOPIC-Pillar-checksumPillarGetAuditTrailsSpecificRequests-cibuild01-contributor, from=Pillar-checksumPillarGetAuditTrailsSpecificRequests, to=Pillar-checksumPillarGetAuditTrailsSpecificRequests, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@7ed8b1e9[responseCode=OPERATION_ACCEPTED_PROGRESS, responseText=Starting to extract the requested audit trails.], contributor=Pillar-checksumPillarGetAuditTrailsSpecificRequests, resultAddress=<null>(default)]
          Result: Received message on TEST-TOPIC-checksumPillarGetAuditTrailsSpecificRequests-cibuild01 : org.bitrepository.bitrepositorymessages.GetAuditTrailsFinalResponse@586e92b2[correlationID=8210a6ac-61fe-4b2c-960b-ce8546d4b1a4, collectionID=TwoPillarCollection, destination=TEST-TOPIC-checksumPillarGetAuditTrailsSpecificRequests-cibuild01, replyTo=TEST-TOPIC-Pillar-checksumPillarGetAuditTrailsSpecificRequests-cibuild01-contributor, from=Pillar-checksumPillarGetAuditTrailsSpecificRequests, to=Pillar-checksumPillarGetAuditTrailsSpecificRequests, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@420df559[responseCode=OPERATION_COMPLETED, responseText=<null>(default)], contributor=Pillar-checksumPillarGetAuditTrailsSpecificRequests, resultingAuditTrails=org.bitrepository.bitrepositoryelements.ResultingAuditTrails@2b661463[resultAddress=<null>(default), auditTrailEvents=org.bitrepository.bitrepositoryelements.AuditTrailEvents@108aaf1f[auditTrailEvent={org.bitrepository.bitrepositoryelements.AuditTrailEvent@2a961de3[sequenceNumber=1, fileID=fileID1487687619736, reportingComponent=MOCK-AUDIT-MANAGER, actorOnFile=ACTOR, actionOnFile=OTHER, actionDateTime=2017-02-21T15:33:39.736+01:00, info=InFo, operationID=operationID, certificateID=certificateid, auditTrailInformation=auditTrails],org.bitrepository.bitrepositoryelements.AuditTrailEvent@3cdd54be[sequenceNumber=2, fileID=notThisFile, reportingComponent=MOCK-AUDIT-MANAGER, actorOnFile=UnknownActor, actionOnFile=FAILURE, actionDateTime=2017-02-21T15:33:39.737+01:00, info=badInfo, operationID=operationID, certificateID=certificateid, auditTrailInformation=WrongAuditTrail]}]], partialResult=false]
        Step: Receive and validate the progress response.
        Step: Receive and validate the final response
      Test success: checksumPillarGetAuditTrailsSpecificRequests
        Added fixture: Initialize a new Pillar.
      Test starting: checksumPillarGetAuditTrailsSuccessful
        Description: Tests the GetAuditTrails functionality of the pillar for the successful scenario, where all audit trails are requested.
        Step: Set up constants and variables.
        Step: Send the identification request
          Result: Received message on TEST-TOPIC-checksumPillarGetAuditTrailsSuccessful-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyContributorsForGetAuditTrailsResponse@2ec173e5[correlationID=07737adc-57c8-4ffa-ba0f-1f02dcac6b3d, collectionID=TwoPillarCollection, destination=TEST-TOPIC-checksumPillarGetAuditTrailsSuccessful-cibuild01, replyTo=TEST-TOPIC-Pillar-checksumPillarGetAuditTrailsSuccessful-cibuild01-contributor, from=Pillar-checksumPillarGetAuditTrailsSuccessful, to=Pillar-checksumPillarGetAuditTrailsSuccessful, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@21fdc052[responseCode=IDENTIFICATION_POSITIVE, responseText=<null>(default)]]
        Step: Make and send the request for the actual GetAuditTrails operation
          Result: Received message on TEST-TOPIC-checksumPillarGetAuditTrailsSuccessful-cibuild01 : org.bitrepository.bitrepositorymessages.GetAuditTrailsProgressResponse@600e8be[correlationID=07737adc-57c8-4ffa-ba0f-1f02dcac6b3d, collectionID=TwoPillarCollection, destination=TEST-TOPIC-checksumPillarGetAuditTrailsSuccessful-cibuild01, replyTo=TEST-TOPIC-Pillar-checksumPillarGetAuditTrailsSuccessful-cibuild01-contributor, from=Pillar-checksumPillarGetAuditTrailsSuccessful, to=Pillar-checksumPillarGetAuditTrailsSuccessful, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@34b2a6f4[responseCode=OPERATION_ACCEPTED_PROGRESS, responseText=Starting to extract the requested audit trails.], contributor=Pillar-checksumPillarGetAuditTrailsSuccessful, resultAddress=<null>(default)]
          Result: Received message on TEST-TOPIC-checksumPillarGetAuditTrailsSuccessful-cibuild01 : org.bitrepository.bitrepositorymessages.GetAuditTrailsFinalResponse@1149b5dc[correlationID=07737adc-57c8-4ffa-ba0f-1f02dcac6b3d, collectionID=TwoPillarCollection, destination=TEST-TOPIC-checksumPillarGetAuditTrailsSuccessful-cibuild01, replyTo=TEST-TOPIC-Pillar-checksumPillarGetAuditTrailsSuccessful-cibuild01-contributor, from=Pillar-checksumPillarGetAuditTrailsSuccessful, to=Pillar-checksumPillarGetAuditTrailsSuccessful, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@5e7918f7[responseCode=OPERATION_COMPLETED, responseText=<null>(default)], contributor=Pillar-checksumPillarGetAuditTrailsSuccessful, resultingAuditTrails=org.bitrepository.bitrepositoryelements.ResultingAuditTrails@5fbd5e9e[resultAddress=<null>(default), auditTrailEvents=org.bitrepository.bitrepositoryelements.AuditTrailEvents@7e19d69b[auditTrailEvent={org.bitrepository.bitrepositoryelements.AuditTrailEvent@22a26bd1[sequenceNumber=1, fileID=fileid, reportingComponent=MOCK-AUDIT-MANAGER, actorOnFile=actor, actionOnFile=OTHER, actionDateTime=2017-02-21T15:33:40.090+01:00, info=info, operationID=operationID, certificateID=certificateID, auditTrailInformation=auditTrail]}]], partialResult=false]
        Step: Receive and validate the progress response.
        Step: Receive and validate the final response
      Test success: checksumPillarGetAuditTrailsSuccessful
    Starting testcase MediatorTest
      Test starting: testMediatorRuntimeExceptionHandling
        Description: Tests the handling of a runtime exception
        Step: Setup create and start the mediator.
        Step: Send a request to the mediator.
15:33:41.436 WARN  o.b.pillar.MediatorTest$TestMediator - Unexpected exception caught.
java.lang.RuntimeException: I am supposed to throw a RuntimeException
	at org.bitrepository.pillar.MediatorTest$ErroneousRequestHandler.processRequest(MediatorTest.java:122)
	at org.bitrepository.pillar.MediatorTest$ErroneousRequestHandler.processRequest(MediatorTest.java:113)
	at org.bitrepository.pillar.messagehandler.PillarMediator.handleRequest(PillarMediator.java:80)
	at org.bitrepository.service.contributor.AbstractContributorMediator$GeneralRequestHandler.onMessage(AbstractContributorMediator.java:101)
	at org.bitrepository.protocol.messagebus.SimpleMessageBus.lambda$sendMessage$0(SimpleMessageBus.java:73)
	at java.lang.Iterable.forEach(Iterable.java:75)
	at org.bitrepository.protocol.messagebus.SimpleMessageBus.sendMessage(SimpleMessageBus.java:73)
	at org.bitrepository.pillar.MediatorTest.testMediatorRuntimeExceptionHandling(MediatorTest.java:84)
	at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
	at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
	at java.lang.reflect.Method.invoke(Method.java:498)
	at org.testng.internal.MethodInvocationHelper.invokeMethod(MethodInvocationHelper.java:86)
	at org.testng.internal.Invoker.invokeMethod(Invoker.java:643)
	at org.testng.internal.Invoker.invokeTestMethod(Invoker.java:820)
	at org.testng.internal.Invoker.invokeTestMethods(Invoker.java:1128)
	at org.testng.internal.TestMethodWorker.invokeTestMethods(TestMethodWorker.java:129)
	at org.testng.internal.TestMethodWorker.run(TestMethodWorker.java:112)
	at org.testng.TestRunner.privateRun(TestRunner.java:782)
	at org.testng.TestRunner.run(TestRunner.java:632)
	at org.testng.SuiteRunner.runTest(SuiteRunner.java:366)
	at org.testng.SuiteRunner.runSequentially(SuiteRunner.java:361)
	at org.testng.SuiteRunner.privateRun(SuiteRunner.java:319)
	at org.testng.SuiteRunner.run(SuiteRunner.java:268)
	at org.testng.SuiteRunnerWorker.runSuite(SuiteRunnerWorker.java:52)
	at org.testng.SuiteRunnerWorker.run(SuiteRunnerWorker.java:86)
	at org.testng.TestNG.runSuitesSequentially(TestNG.java:1244)
	at org.testng.TestNG.runSuitesLocally(TestNG.java:1169)
	at org.testng.TestNG.run(TestNG.java:1064)
	at org.apache.maven.surefire.testng.TestNGExecutor.run(TestNGExecutor.java:115)
	at org.apache.maven.surefire.testng.TestNGDirectoryTestSuite.executeMulti(TestNGDirectoryTestSuite.java:204)
	at org.apache.maven.surefire.testng.TestNGDirectoryTestSuite.execute(TestNGDirectoryTestSuite.java:107)
	at org.apache.maven.surefire.testng.TestNGProvider.invoke(TestNGProvider.java:112)
	at org.apache.maven.surefire.booter.ForkedBooter.invokeProviderInSameClassLoader(ForkedBooter.java:200)
	at org.apache.maven.surefire.booter.ForkedBooter.runSuitesInProcess(ForkedBooter.java:153)
	at org.apache.maven.surefire.booter.ForkedBooter.main(ForkedBooter.java:103)
          Result: Received message on TEST-TOPIC-testMediatorRuntimeExceptionHandling-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyContributorsForGetStatusResponse@220700c1[correlationID=40cc2150-c579-4fa6-8124-383d930d1ffe, collectionID=TwoPillarCollection, destination=TEST-TOPIC-testMediatorRuntimeExceptionHandling-cibuild01, replyTo=TEST-TOPIC-MediatorUnderTest-cibuild01-contributor, from=MediatorUnderTest, to=MediatorUnderTest, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@2a1a57e5[responseCode=FAILURE, responseText=java.lang.RuntimeException: I am supposed to throw a RuntimeException], contributor=TEST-TOPIC-cibuild01, timeToDeliver=<null>(default)]
15:33:41.445 WARN  o.b.p.common.PillarAlarmDispatcher - Sending alarm: org.bitrepository.bitrepositoryelements.Alarm@7c57fc78[origDateTime=2017-02-21T15:33:41.444+01:00, alarmCode=COMPONENT_FAILURE, alarmRaiser=MediatorUnderTest, alarmText=java.lang.RuntimeException: I am supposed to throw a RuntimeException, fileID=<null>(default), collectionID=<null>(default)]
          Result: Received message on TEST-ALARM-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.AlarmMessage@1ee7aa6[correlationID=08af3ffd-8afb-4124-b6c2-f9ca666f3cda, collectionID=<null>(default), destination=TEST-ALARM-TOPIC-cibuild01, replyTo=TEST-TOPIC-MediatorUnderTest-cibuild01-contributor, from=MediatorUnderTest, to=<null>(default), version=30, minVersion=24, alarm=org.bitrepository.bitrepositoryelements.Alarm@7c57fc78[origDateTime=2017-02-21T15:33:41.444+01:00, alarmCode=COMPONENT_FAILURE, alarmRaiser=MediatorUnderTest, alarmText=java.lang.RuntimeException: I am supposed to throw a RuntimeException, fileID=<null>(default), collectionID=<null>(default)]]
      Test success: testMediatorRuntimeExceptionHandling
    Starting testcase ReferenceArchiveTest
        Added fixture: Initialize the Reference pillar cache with an empty file in default collection TwoPillarCollection
      Test starting: testReferenceArchive
        Description: Test the ReferenceArchive.
        Step: Setup
        Step: test 'hasFile'
        Step: Test 'getFile'
        Step: Test getAllFileIDs
        Step: Test 'getFileAsInputstream'
        Step: Delete, recreate and delete again
        Step: Try to delete missing file.
        Step: Replace a file, which does not exist in the filedir.
        Step: Copy a file into the tmpDir and then use replace.
        Step: Try performing the replace, when the file in the tempdir has been removed.
      Test success: testReferenceArchive
    Starting testcase ReplaceFileTest
        Added fixture: Initialize a new Pillar.
      Test starting: badCaseIdentification
        Description: Tests the identification for a ReplaceFile operation on the pillar for the failure scenario, when the file does not exist.
        Step: Set up constants and variables.
        Step: Setup for not having the file and delivering pillar id
        Step: Create and send the identify request message.
          Result: Received message on TEST-TOPIC-badCaseIdentification-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForReplaceFileResponse@573539f[correlationID=c79b200f-93ab-4055-af7c-2061d002cc88, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseIdentification-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseIdentification-cibuild01-contributor, from=Pillar-badCaseIdentification, to=badCaseIdentification, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@de3b06a[responseCode=FILE_NOT_FOUND_FAILURE, responseText=Could not find the requested file to delete.], fileID=DefaultFile, pillarID=Pillar-badCaseIdentification, pillarChecksumSpec=<null>(default), timeToDeliver=<null>(default)]
        Step: Retrieve and validate the response getPillarID() the pillar.
      Test success: badCaseIdentification
        Added fixture: Initialize a new Pillar.
      Test starting: badCaseOperationMissingFile
        Description: Tests the ReplaceFile operation on the pillar for the failure scenario, when the file is missing.
        Step: Set up constants and variables.
        Step: Setup for not having the file and delivering pillar id
        Step: Create and send the identify request message.
          Result: Received message on TEST-TOPIC-badCaseOperationMissingFile-cibuild01 : org.bitrepository.bitrepositorymessages.ReplaceFileFinalResponse@4133f274[correlationID=4e86ac3c-6064-4ddc-96e7-8dae79e48a8f, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseOperationMissingFile-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationMissingFile-cibuild01-contributor, from=Pillar-badCaseOperationMissingFile, to=badCaseOperationMissingFile, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@14747c05[responseCode=FILE_NOT_FOUND_FAILURE, responseText=The file 'DefaultFile' has been requested, but we do not have that file!], pillarID=Pillar-badCaseOperationMissingFile, pillarChecksumSpec=<null>(default), fileID=DefaultFile, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, checksumDataForExistingFile=<null>(default), checksumDataForNewFile=<null>(default)]
        Step: Retrieve the FinalResponse for the ReplaceFile request
      Test success: badCaseOperationMissingFile
        Added fixture: Initialize a new Pillar.
      Test starting: badCaseOperationNoDestructiveChecksum
        Description: Tests the ReplaceFile operation on the pillar for the failure scenario, when no validation checksum is given for the destructive action, but though is required.
        Step: Set up constants and variables.
        Step: Setup for having the file and delivering pillar id
        Step: Create and send the identify request message.
          Result: Received message on TEST-TOPIC-badCaseOperationNoDestructiveChecksum-cibuild01 : org.bitrepository.bitrepositorymessages.ReplaceFileFinalResponse@2700b0d9[correlationID=f043b3e6-a75a-4dfd-9e4a-f55bd044d4da, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseOperationNoDestructiveChecksum-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationNoDestructiveChecksum-cibuild01-contributor, from=Pillar-badCaseOperationNoDestructiveChecksum, to=badCaseOperationNoDestructiveChecksum, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@1ee11117[responseCode=EXISTING_FILE_CHECKSUM_FAILURE, responseText=According to the contract a checksum for file to be deleted during the replacing operation is required.], pillarID=Pillar-badCaseOperationNoDestructiveChecksum, pillarChecksumSpec=<null>(default), fileID=DefaultFile, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, checksumDataForExistingFile=<null>(default), checksumDataForNewFile=<null>(default)]
15:33:44.753 WARN  o.b.p.common.PillarAlarmDispatcher - Sending alarm: org.bitrepository.bitrepositoryelements.Alarm@3620d182[origDateTime=2017-02-21T15:33:44.752+01:00, alarmCode=CHECKSUM_ALARM, alarmRaiser=Pillar-badCaseOperationNoDestructiveChecksum, alarmText=According to the contract a checksum for file to be deleted during the replacing operation is required., fileID=DefaultFile, collectionID=TwoPillarCollection]
          Result: Received message on TEST-ALARM-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.AlarmMessage@65d7fbc3[correlationID=9ab885db-337d-4f78-8ce4-e9f3a029ace3, collectionID=TwoPillarCollection, destination=TEST-ALARM-TOPIC-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationNoDestructiveChecksum-cibuild01-contributor, from=Pillar-badCaseOperationNoDestructiveChecksum, to=<null>(default), version=30, minVersion=24, alarm=org.bitrepository.bitrepositoryelements.Alarm@3620d182[origDateTime=2017-02-21T15:33:44.752+01:00, alarmCode=CHECKSUM_ALARM, alarmRaiser=Pillar-badCaseOperationNoDestructiveChecksum, alarmText=According to the contract a checksum for file to be deleted during the replacing operation is required., fileID=DefaultFile, collectionID=TwoPillarCollection]]
        Step: Retrieve the FinalResponse for the ReplaceFile request
        Step: Pillar should have sent an alarm
      Test success: badCaseOperationNoDestructiveChecksum
        Added fixture: Initialize a new Pillar.
      Test starting: badCaseOperationNoValidationChecksum
        Description: Tests the ReplaceFile operation on the pillar for the failure scenario, when no validation checksum is given for the new file, but though is required.
        Step: Set up constants and variables.
        Step: Setup for having the file and delivering pillar id
        Step: Create and send the identify request message.
          Result: Received message on TEST-TOPIC-badCaseOperationNoValidationChecksum-cibuild01 : org.bitrepository.bitrepositorymessages.ReplaceFileFinalResponse@62bc8312[correlationID=cb3c5073-02f3-452e-a6e3-e704b1a134af, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseOperationNoValidationChecksum-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationNoValidationChecksum-cibuild01-contributor, from=Pillar-badCaseOperationNoValidationChecksum, to=badCaseOperationNoValidationChecksum, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@4cbb519f[responseCode=NEW_FILE_CHECKSUM_FAILURE, responseText=According to the contract a checksum for new file in the replacing operation is required.], pillarID=Pillar-badCaseOperationNoValidationChecksum, pillarChecksumSpec=<null>(default), fileID=DefaultFile, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, checksumDataForExistingFile=<null>(default), checksumDataForNewFile=<null>(default)]
15:33:45.049 WARN  o.b.p.common.PillarAlarmDispatcher - Sending alarm: org.bitrepository.bitrepositoryelements.Alarm@5348db24[origDateTime=2017-02-21T15:33:45.049+01:00, alarmCode=CHECKSUM_ALARM, alarmRaiser=Pillar-badCaseOperationNoValidationChecksum, alarmText=According to the contract a checksum for new file in the replacing operation is required., fileID=DefaultFile, collectionID=TwoPillarCollection]
          Result: Received message on TEST-ALARM-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.AlarmMessage@504b52db[correlationID=3b77326a-fa6f-40b6-a1d7-31d585715d27, collectionID=TwoPillarCollection, destination=TEST-ALARM-TOPIC-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationNoValidationChecksum-cibuild01-contributor, from=Pillar-badCaseOperationNoValidationChecksum, to=<null>(default), version=30, minVersion=24, alarm=org.bitrepository.bitrepositoryelements.Alarm@5348db24[origDateTime=2017-02-21T15:33:45.049+01:00, alarmCode=CHECKSUM_ALARM, alarmRaiser=Pillar-badCaseOperationNoValidationChecksum, alarmText=According to the contract a checksum for new file in the replacing operation is required., fileID=DefaultFile, collectionID=TwoPillarCollection]]
        Step: Retrieve the FinalResponse for the ReplaceFile request
        Step: Pillar should have sent an alarm
      Test success: badCaseOperationNoValidationChecksum
        Added fixture: Initialize a new Pillar.
      Test starting: badCaseOperationWrongDestructiveChecksum
        Description: Tests the ReplaceFile operation on the pillar for the failure scenario, when the checksum for the destructive action is different from the one in the cache.
        Step: Set up constants and variables.
        Step: Setup for having the file and delivering pillar id
        Step: Create and send the identify request message.
15:33:45.348 WARN  o.b.p.m.ReplaceFileRequestHandler - Failed to handle replace operation on file 'DefaultFile' since the request had the checksum '1234cccccccc4321' where our local file has the value '1234cccccccc4322'. Sending alarm and respond failure.
          Result: Received message on TEST-TOPIC-badCaseOperationWrongDestructiveChecksum-cibuild01 : org.bitrepository.bitrepositorymessages.ReplaceFileFinalResponse@63c8550f[correlationID=3d621f92-5b31-4fa5-8110-03224f5c07c0, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseOperationWrongDestructiveChecksum-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationWrongDestructiveChecksum-cibuild01-contributor, from=Pillar-badCaseOperationWrongDestructiveChecksum, to=badCaseOperationWrongDestructiveChecksum, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@61625dd6[responseCode=EXISTING_FILE_CHECKSUM_FAILURE, responseText=Requested to replace the file 'DefaultFile' with checksum '1234cccccccc4321', but our file had a different checksum.], pillarID=Pillar-badCaseOperationWrongDestructiveChecksum, pillarChecksumSpec=<null>(default), fileID=DefaultFile, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, checksumDataForExistingFile=<null>(default), checksumDataForNewFile=<null>(default)]
15:33:45.351 WARN  o.b.p.common.PillarAlarmDispatcher - Sending alarm: org.bitrepository.bitrepositoryelements.Alarm@3cfd203e[origDateTime=2017-02-21T15:33:45.350+01:00, alarmCode=CHECKSUM_ALARM, alarmRaiser=Pillar-badCaseOperationWrongDestructiveChecksum, alarmText=Requested to replace the file 'DefaultFile' with checksum '1234cccccccc4321', but our file had a different checksum., fileID=DefaultFile, collectionID=TwoPillarCollection]
          Result: Received message on TEST-ALARM-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.AlarmMessage@429c8222[correlationID=335dad10-bcb6-47c3-b637-5b81e9af10f4, collectionID=TwoPillarCollection, destination=TEST-ALARM-TOPIC-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationWrongDestructiveChecksum-cibuild01-contributor, from=Pillar-badCaseOperationWrongDestructiveChecksum, to=<null>(default), version=30, minVersion=24, alarm=org.bitrepository.bitrepositoryelements.Alarm@3cfd203e[origDateTime=2017-02-21T15:33:45.350+01:00, alarmCode=CHECKSUM_ALARM, alarmRaiser=Pillar-badCaseOperationWrongDestructiveChecksum, alarmText=Requested to replace the file 'DefaultFile' with checksum '1234cccccccc4321', but our file had a different checksum., fileID=DefaultFile, collectionID=TwoPillarCollection]]
        Step: Retrieve the FinalResponse for the ReplaceFile request
        Step: Pillar should have sent an alarm
      Test success: badCaseOperationWrongDestructiveChecksum
        Added fixture: Initialize a new Pillar.
      Test starting: goodCaseIdentification
        Description: Tests the identification for a ReplaceFile operation on the pillar for the successful scenario.
        Step: Set up constants and variables.
        Step: Setup for having the file and delivering pillar id
        Step: Create and send the identify request message.
          Result: Received message on TEST-TOPIC-goodCaseIdentification-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForReplaceFileResponse@1e79c8b9[correlationID=683fa443-dff4-4b22-aa7a-952565077c90, collectionID=TwoPillarCollection, destination=TEST-TOPIC-goodCaseIdentification-cibuild01, replyTo=TEST-TOPIC-Pillar-goodCaseIdentification-cibuild01-contributor, from=Pillar-goodCaseIdentification, to=goodCaseIdentification, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@70d524d6[responseCode=IDENTIFICATION_POSITIVE, responseText=Operation acknowledged and accepted.], fileID=DefaultFile, pillarID=Pillar-goodCaseIdentification, pillarChecksumSpec=<null>(default), timeToDeliver=org.bitrepository.bitrepositoryelements.TimeMeasureTYPE@690b300[timeMeasureUnit=MILLISECONDS, timeMeasureValue=1000]]
        Step: Retrieve and validate the response getPillarID() the pillar.
      Test success: goodCaseIdentification
        Added fixture: Initialize a new Pillar.
      Test starting: goodCaseOperation
        Description: Tests the ReplaceFile operation on the pillar for the success scenario.
        Step: Set up constants and variables.
        Step: Setup for already having the file and delivering pillar id
        Step: Create and send the identify request message.
          Result: Received message on TEST-TOPIC-goodCaseOperation-cibuild01 : org.bitrepository.bitrepositorymessages.ReplaceFileProgressResponse@305fe49[correlationID=b674d086-1425-42bc-8a85-51cd8b16fe2c, collectionID=TwoPillarCollection, destination=TEST-TOPIC-goodCaseOperation-cibuild01, replyTo=TEST-TOPIC-Pillar-goodCaseOperation-cibuild01-contributor, from=Pillar-goodCaseOperation, to=goodCaseOperation, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@48d37d0a[responseCode=OPERATION_ACCEPTED_PROGRESS, responseText=Performing the ReplaceFileRequest for file 'DefaultFile' at 'TwoPillarCollection'.], pillarID=Pillar-goodCaseOperation, pillarChecksumSpec=<null>(default), fileID=DefaultFile, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt]
          Result: Received message on TEST-TOPIC-goodCaseOperation-cibuild01 : org.bitrepository.bitrepositorymessages.ReplaceFileFinalResponse@7f71d07f[correlationID=b674d086-1425-42bc-8a85-51cd8b16fe2c, collectionID=TwoPillarCollection, destination=TEST-TOPIC-goodCaseOperation-cibuild01, replyTo=TEST-TOPIC-Pillar-goodCaseOperation-cibuild01-contributor, from=Pillar-goodCaseOperation, to=goodCaseOperation, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@53aa9e6e[responseCode=OPERATION_COMPLETED, responseText=<null>(default)], pillarID=Pillar-goodCaseOperation, pillarChecksumSpec=<null>(default), fileID=DefaultFile, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, checksumDataForExistingFile=<null>(default), checksumDataForNewFile=<null>(default)]
        Step: Retrieve the ProgressResponse for the GetFileIDs request
        Step: Retrieve the FinalResponse for the ReplaceFile request
      Test success: goodCaseOperation
        Added fixture: Initialize a new Pillar.
      Test starting: goodCaseOperationWithChecksumsReturn
        Description: Tests the ReplaceFile operation on the pillar for the success scenario, when requesting both the cheksums of the file returned.
        Step: Set up constants and variables.
        Step: Setup for already having the file and delivering pillar id
        Step: Create and send the identify request message.
          Result: Received message on TEST-TOPIC-goodCaseOperationWithChecksumsReturn-cibuild01 : org.bitrepository.bitrepositorymessages.ReplaceFileProgressResponse@28cf351b[correlationID=0081fac8-0fc5-4a94-930a-e4efb95f4bc0, collectionID=TwoPillarCollection, destination=TEST-TOPIC-goodCaseOperationWithChecksumsReturn-cibuild01, replyTo=TEST-TOPIC-Pillar-goodCaseOperationWithChecksumsReturn-cibuild01-contributor, from=Pillar-goodCaseOperationWithChecksumsReturn, to=goodCaseOperationWithChecksumsReturn, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@23b91667[responseCode=OPERATION_ACCEPTED_PROGRESS, responseText=Performing the ReplaceFileRequest for file 'DefaultFile' at 'TwoPillarCollection'.], pillarID=Pillar-goodCaseOperationWithChecksumsReturn, pillarChecksumSpec=<null>(default), fileID=DefaultFile, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt]
          Result: Received message on TEST-TOPIC-goodCaseOperationWithChecksumsReturn-cibuild01 : org.bitrepository.bitrepositorymessages.ReplaceFileFinalResponse@a5491ab[correlationID=0081fac8-0fc5-4a94-930a-e4efb95f4bc0, collectionID=TwoPillarCollection, destination=TEST-TOPIC-goodCaseOperationWithChecksumsReturn-cibuild01, replyTo=TEST-TOPIC-Pillar-goodCaseOperationWithChecksumsReturn-cibuild01-contributor, from=Pillar-goodCaseOperationWithChecksumsReturn, to=goodCaseOperationWithChecksumsReturn, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@27a18e3b[responseCode=OPERATION_COMPLETED, responseText=<null>(default)], pillarID=Pillar-goodCaseOperationWithChecksumsReturn, pillarChecksumSpec=<null>(default), fileID=DefaultFile, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, checksumDataForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@76171039[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@1d763ab2[checksumType=HMAC_SHA512, checksumSalt={97,98}, otherChecksumType=<null>(default)], checksumValue={18,52,-52,-52,-52,-52,67,34}, calculationTimestamp=2017-02-21T15:33:48.229+01:00], checksumDataForNewFile=org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@3381297e[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@18faa963[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], checksumValue={18,52,-52,-52,-52,-52,67,33}, calculationTimestamp=2017-02-21T15:33:48.229+01:00]]
        Step: Retrieve the ProgressResponse for the GetFileIDs request
        Step: Retrieve the FinalResponse for the ReplaceFile request
      Test success: goodCaseOperationWithChecksumsReturn
    Starting testcase ChecksumDatabaseMigrationTest
      Test starting: testMigratingChecksumDatabaseFromV3ToV4
        Description: Tests that the checksums table can be migrated from version 3 to 4, e.g. changing the column calculatedchecksumdate from timestamp to bigint.
        Step: Ensure cleanup
15:33:49.401 WARN  o.b.common.utils.FileUtils - Could not delete '/home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-reference-pillar/target/test/referencepillar/checksumdb-for-migration'
        Step: Unzipping and connecting to checksum database version 3
        Step: Validate setup
        Step: Ingest a entry to the database with a date for the calculationdate
        Step: Perform migration
15:33:50.065 WARN  o.b.service.database.DatabaseUtils - Migrating ChecksumDB from version 3 to 4.
        Step: Validate the migration
      Test success: testMigratingChecksumDatabaseFromV3ToV4
    Starting testcase ChecksumEntryTest
      Test starting: testExtendedTestCase
        Description: Test the ChecksumEntry
        Step: Create a ChecksumEntry
      Test success: testExtendedTestCase
    Starting testcase DeleteFileTest
        Added fixture: Initialize a new Pillar.
      Test starting: badCaseIdentification
        Description: Tests the identification for a DeleteFile operation on the checksum pillar for the failure scenario, when the file is missing.
        Step: Set up constants and variables.
        Step: Setup for delivering pillar id and not having the file 
        Step: Create and send the identify request message.
          Result: Received message on TEST-TOPIC-badCaseIdentification-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForDeleteFileResponse@4c8a5bcc[correlationID=74c10417-f96b-41a7-b421-f36bfcf57f87, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseIdentification-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseIdentification-cibuild01-contributor, from=Pillar-badCaseIdentification, to=badCaseIdentification, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@7e85bc61[responseCode=FILE_NOT_FOUND_FAILURE, responseText=File not found.], fileID=DefaultFilebadCaseIdentification, pillarID=Pillar-badCaseIdentification, pillarChecksumSpec=<null>(default), timeToDeliver=<null>(default)]
        Step: Retrieve and validate the response getPillarID() the pillar.
      Test success: badCaseIdentification
        Added fixture: Initialize a new Pillar.
      Test starting: badCaseOperationMissingVerification
        Description: Tests the DeleteFile functionality of the pillar for the failure scenario, where it does not have the file.
        Step: Set up constants and variables.
        Step: Setup for delivering pillar id and having the file 
        Step: Create and send the actual DeleteFile message to the pillar.
          Result: Received message on TEST-TOPIC-badCaseOperationMissingVerification-cibuild01 : org.bitrepository.bitrepositorymessages.DeleteFileFinalResponse@4ddecf15[correlationID=a7a204de-8dba-46c7-979f-d87cbfd842d5, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseOperationMissingVerification-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationMissingVerification-cibuild01-contributor, from=Pillar-badCaseOperationMissingVerification, to=badCaseOperationMissingVerification, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@70691683[responseCode=EXISTING_FILE_CHECKSUM_FAILURE, responseText=No mandatory checksum for destructive operation was supplied.], pillarID=Pillar-badCaseOperationMissingVerification, fileID=DefaultFilebadCaseOperationMissingVerification, checksumDataForExistingFile=<null>(default)]
15:33:51.907 WARN  o.b.p.common.PillarAlarmDispatcher - Sending alarm: org.bitrepository.bitrepositoryelements.Alarm@645494c5[origDateTime=2017-02-21T15:33:51.906+01:00, alarmCode=CHECKSUM_ALARM, alarmRaiser=Pillar-badCaseOperationMissingVerification, alarmText=No mandatory checksum for destructive operation was supplied., fileID=DefaultFilebadCaseOperationMissingVerification, collectionID=TwoPillarCollection]
          Result: Received message on TEST-ALARM-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.AlarmMessage@5fc9593d[correlationID=e5fe0755-6f97-4ab6-a89a-ad4a8c71732b, collectionID=TwoPillarCollection, destination=TEST-ALARM-TOPIC-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationMissingVerification-cibuild01-contributor, from=Pillar-badCaseOperationMissingVerification, to=<null>(default), version=30, minVersion=24, alarm=org.bitrepository.bitrepositoryelements.Alarm@645494c5[origDateTime=2017-02-21T15:33:51.906+01:00, alarmCode=CHECKSUM_ALARM, alarmRaiser=Pillar-badCaseOperationMissingVerification, alarmText=No mandatory checksum for destructive operation was supplied., fileID=DefaultFilebadCaseOperationMissingVerification, collectionID=TwoPillarCollection]]
        Step: Retrieve the FinalResponse for the DeleteFile request
        Step: Pillar should have sent an alarm
      Test success: badCaseOperationMissingVerification
        Added fixture: Initialize a new Pillar.
      Test starting: badCaseOperationNoFile
        Description: Tests the DeleteFile functionality of the pillar for the failure scenario, where it does not have the file.
        Step: Set up constants and variables.
        Step: Setup for delivering pillar id and not having the file 
        Step: Create and send the actual DeleteFile message to the pillar.
          Result: Received message on TEST-TOPIC-badCaseOperationNoFile-cibuild01 : org.bitrepository.bitrepositorymessages.DeleteFileFinalResponse@30b9b8a5[correlationID=5435562b-737c-4253-9efc-0066419e7081, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseOperationNoFile-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationNoFile-cibuild01-contributor, from=Pillar-badCaseOperationNoFile, to=badCaseOperationNoFile, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@2ec63c62[responseCode=FILE_NOT_FOUND_FAILURE, responseText=File not found.], pillarID=Pillar-badCaseOperationNoFile, fileID=DefaultFilebadCaseOperationNoFile, checksumDataForExistingFile=<null>(default)]
        Step: Retrieve the FinalResponse for the DeleteFile request
      Test success: badCaseOperationNoFile
        Added fixture: Initialize a new Pillar.
      Test starting: goodCaseIdentification
        Description: Tests the identification for a DeleteFile operation on the pillar for the successful scenario.
        Step: Set up constants and variables.
        Step: Setup for having the file and delivering pillar id
        Step: Create and send the identify request message.
          Result: Received message on TEST-TOPIC-goodCaseIdentification-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForDeleteFileResponse@3cb24241[correlationID=2b8868fc-a86a-4036-b45d-22210559cc7f, collectionID=TwoPillarCollection, destination=TEST-TOPIC-goodCaseIdentification-cibuild01, replyTo=TEST-TOPIC-Pillar-goodCaseIdentification-cibuild01-contributor, from=Pillar-goodCaseIdentification, to=goodCaseIdentification, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@18050959[responseCode=IDENTIFICATION_POSITIVE, responseText=Operation acknowledged and accepted.], fileID=DefaultFilegoodCaseIdentification, pillarID=Pillar-goodCaseIdentification, pillarChecksumSpec=<null>(default), timeToDeliver=org.bitrepository.bitrepositoryelements.TimeMeasureTYPE@a37ede6[timeMeasureUnit=MILLISECONDS, timeMeasureValue=1000]]
        Step: Retrieve and validate the response getPillarID() the pillar.
      Test success: goodCaseIdentification
    Starting testcase GetChecksumsTest
        Added fixture: Initialize a new Pillar.
      Test starting: badCaseIdentification
        Description: Tests the identification for a GetChecksums operation on the pillar for the failure scenario, when the file is missing.
        Step: Set up constants and variables.
        Step: Setup for delivering pillar id and not having the file 
        Step: Create and send the identify request message.
          Result: Received message on TEST-TOPIC-badCaseIdentification-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForGetChecksumsResponse@70176150[correlationID=6e8558e1-b083-4865-8029-2b1fc8f05b3b, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseIdentification-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseIdentification-cibuild01-contributor, from=Pillar-badCaseIdentification, to=badCaseIdentification, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@279dbd48[responseCode=FILE_NOT_FOUND_FAILURE, responseText=File not found.], fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@49f640a4[fileID=DefaultFilebadCaseIdentification, allFileIDs=<null>(default)], checksumRequestForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@1e2ec5db[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], pillarID=Pillar-badCaseIdentification, pillarChecksumSpec=<null>(default), timeToDeliver=<null>(default)]
        Step: Retrieve and validate the response getPillarID() the pillar.
      Test success: badCaseIdentification
        Added fixture: Initialize a new Pillar.
      Test starting: badCaseOperationNoFile
        Description: Tests the GetChecksums functionality of the pillar for the failure scenario, where it does not have the file.
        Step: Set up constants and variables.
        Step: Setup for not having the file
        Step: Create and send the actual GetChecksums message to the pillar.
15:33:55.930 WARN  o.b.p.m.GetChecksumsRequestHandler - The following file is missing 'DefaultFilebadCaseOperationNoFile' at collection 'TwoPillarCollection'.
          Result: Received message on TEST-TOPIC-badCaseOperationNoFile-cibuild01 : org.bitrepository.bitrepositorymessages.GetChecksumsFinalResponse@86c162e[correlationID=dc96e8c7-0eb5-4c74-9db7-17eb32d3ca27, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseOperationNoFile-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationNoFile-cibuild01-contributor, from=Pillar-badCaseOperationNoFile, to=badCaseOperationNoFile, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@74899df1[responseCode=FILE_NOT_FOUND_FAILURE, responseText=File not found.], pillarID=Pillar-badCaseOperationNoFile, checksumRequestForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@619a61c1[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], resultingChecksums=<null>(default), partialResult=<null>(default)]
15:33:55.937 WARN  o.b.p.m.GetChecksumsRequestHandler - The following file is missing 'DefaultFilebadCaseOperationNoFile' at collection 'TwoPillarCollection'.
          Result: Received message on TEST-TOPIC-badCaseOperationNoFile-cibuild01 : org.bitrepository.bitrepositorymessages.GetChecksumsFinalResponse@246b6267[correlationID=dc96e8c7-0eb5-4c74-9db7-17eb32d3ca27, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseOperationNoFile-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationNoFile-cibuild01-contributor, from=Pillar-badCaseOperationNoFile, to=badCaseOperationNoFile, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@164d9b42[responseCode=FILE_NOT_FOUND_FAILURE, responseText=File not found.], pillarID=Pillar-badCaseOperationNoFile, checksumRequestForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@619a61c1[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], resultingChecksums=<null>(default), partialResult=<null>(default)]
        Step: Retrieve the FinalResponse for the GetChecksums request
      Test success: badCaseOperationNoFile
          Result: The following messages haven't been handled by the testcase: 
org.bitrepository.bitrepositorymessages.GetChecksumsFinalResponse@246b6267[correlationID=dc96e8c7-0eb5-4c74-9db7-17eb32d3ca27, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseOperationNoFile-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationNoFile-cibuild01-contributor, from=Pillar-badCaseOperationNoFile, to=badCaseOperationNoFile, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@164d9b42[responseCode=FILE_NOT_FOUND_FAILURE, responseText=File not found.], pillarID=Pillar-badCaseOperationNoFile, checksumRequestForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@619a61c1[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], resultingChecksums=<null>(default), partialResult=<null>(default)]
15:33:56.941 WARN  o.b.protocol.bus.MessageReceiver - The following messages haven't been handled by the testcase: 
org.bitrepository.bitrepositorymessages.GetChecksumsFinalResponse@246b6267[correlationID=dc96e8c7-0eb5-4c74-9db7-17eb32d3ca27, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseOperationNoFile-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationNoFile-cibuild01-contributor, from=Pillar-badCaseOperationNoFile, to=badCaseOperationNoFile, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@164d9b42[responseCode=FILE_NOT_FOUND_FAILURE, responseText=File not found.], pillarID=Pillar-badCaseOperationNoFile, checksumRequestForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@619a61c1[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], resultingChecksums=<null>(default), partialResult=<null>(default)]
        Added fixture: Initialize a new Pillar.
      Test starting: goodCaseIdentification
        Description: Tests the identification for a GetChecksums operation on the pillar for the successful scenario.
        Step: Set up constants and variables.
        Step: Setup for having the file and delivering pillar id
        Step: Create and send the identify request message.
          Result: Received message on TEST-TOPIC-goodCaseIdentification-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForGetChecksumsResponse@4cbad1d4[correlationID=83ca5eac-a783-4886-917a-e663134d0af5, collectionID=TwoPillarCollection, destination=TEST-TOPIC-goodCaseIdentification-cibuild01, replyTo=TEST-TOPIC-Pillar-goodCaseIdentification-cibuild01-contributor, from=Pillar-goodCaseIdentification, to=goodCaseIdentification, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@686f50bf[responseCode=IDENTIFICATION_POSITIVE, responseText=Operation acknowledged and accepted.], fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@2eedf598[fileID=DefaultFilegoodCaseIdentification, allFileIDs=<null>(default)], checksumRequestForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@28e6d65f[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], pillarID=Pillar-goodCaseIdentification, pillarChecksumSpec=<null>(default), timeToDeliver=org.bitrepository.bitrepositoryelements.TimeMeasureTYPE@32c886e6[timeMeasureUnit=MILLISECONDS, timeMeasureValue=1000]]
        Step: Retrieve and validate the response getPillarID() the pillar.
      Test success: goodCaseIdentification
        Added fixture: Initialize a new Pillar.
      Test starting: goodCaseOperationAllFiles
        Description: Tests the GetChecksums operation on the pillar for the successful scenario, when requesting all files.
        Step: Set up constants and variables.
        Step: Setup for having the file and delivering result-set
        Step: Create and send the actual GetChecksums message to the pillar.
          Result: Received message on TEST-TOPIC-goodCaseOperationAllFiles-cibuild01 : org.bitrepository.bitrepositorymessages.GetChecksumsProgressResponse@24170847[correlationID=552a2ad7-eec8-4c2d-8b12-4421610661b7, collectionID=TwoPillarCollection, destination=TEST-TOPIC-goodCaseOperationAllFiles-cibuild01, replyTo=TEST-TOPIC-Pillar-goodCaseOperationAllFiles-cibuild01-contributor, from=Pillar-goodCaseOperationAllFiles, to=goodCaseOperationAllFiles, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@6cd42516[responseCode=OPERATION_ACCEPTED_PROGRESS, responseText=Starting to calculate checksums.], pillarID=Pillar-goodCaseOperationAllFiles, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@5b40c2a3[fileID=<null>(default), allFileIDs=true], checksumRequestForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@5b28c50b[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], resultAddress=<null>(default)]
          Result: Received message on TEST-TOPIC-goodCaseOperationAllFiles-cibuild01 : org.bitrepository.bitrepositorymessages.GetChecksumsFinalResponse@2361949f[correlationID=552a2ad7-eec8-4c2d-8b12-4421610661b7, collectionID=TwoPillarCollection, destination=TEST-TOPIC-goodCaseOperationAllFiles-cibuild01, replyTo=TEST-TOPIC-Pillar-goodCaseOperationAllFiles-cibuild01-contributor, from=Pillar-goodCaseOperationAllFiles, to=goodCaseOperationAllFiles, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@7ceffb96[responseCode=OPERATION_COMPLETED, responseText=<null>(default)], pillarID=Pillar-goodCaseOperationAllFiles, checksumRequestForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@5b28c50b[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], resultingChecksums=org.bitrepository.bitrepositoryelements.ResultingChecksums@347f94ac[resultAddress=<null>(default), checksumDataItems={org.bitrepository.bitrepositoryelements.ChecksumDataForChecksumSpecTYPE@120d45a9[fileID=DefaultFile, checksumValue={18,52,-52,-52,-52,-52,67,33}, calculationTimestamp=2017-02-21T15:33:58.451+01:00],org.bitrepository.bitrepositoryelements.ChecksumDataForChecksumSpecTYPE@3de7ee1b[fileID=goodCaseOperationAllFiles-cibuild01--Test-File-1487687638435, checksumValue={18,52,-52,-52,-52,-52,67,34}, calculationTimestamp=1970-01-01T01:00:00.000+01:00]}], partialResult=false]
        Step: Retrieve the ProgressResponse for the GetChecksums request
        Step: Retrieve the FinalResponse for the GetChecksums request
      Test success: goodCaseOperationAllFiles
        Added fixture: Initialize a new Pillar.
      Test starting: goodCaseOperationSingleFile
        Description: Tests the GetChecksums operation on the pillar for the successful scenario when requesting one specific file.
        Step: Set up constants and variables.
        Step: Setup for having the file and delivering result-set
        Step: Create and send the actual GetChecksums message to the pillar.
          Result: Received message on TEST-TOPIC-goodCaseOperationSingleFile-cibuild01 : org.bitrepository.bitrepositorymessages.GetChecksumsProgressResponse@1bec36ee[correlationID=f60a95a1-6250-4cdb-8790-c82b9ae02af8, collectionID=TwoPillarCollection, destination=TEST-TOPIC-goodCaseOperationSingleFile-cibuild01, replyTo=TEST-TOPIC-Pillar-goodCaseOperationSingleFile-cibuild01-contributor, from=Pillar-goodCaseOperationSingleFile, to=goodCaseOperationSingleFile, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@1a57c7c2[responseCode=OPERATION_ACCEPTED_PROGRESS, responseText=Starting to calculate checksums.], pillarID=Pillar-goodCaseOperationSingleFile, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@16d05123[fileID=DefaultFilegoodCaseOperationSingleFile, allFileIDs=<null>(default)], checksumRequestForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@4111bcd6[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], resultAddress=<null>(default)]
          Result: Received message on TEST-TOPIC-goodCaseOperationSingleFile-cibuild01 : org.bitrepository.bitrepositorymessages.GetChecksumsFinalResponse@3bb0a95c[correlationID=f60a95a1-6250-4cdb-8790-c82b9ae02af8, collectionID=TwoPillarCollection, destination=TEST-TOPIC-goodCaseOperationSingleFile-cibuild01, replyTo=TEST-TOPIC-Pillar-goodCaseOperationSingleFile-cibuild01-contributor, from=Pillar-goodCaseOperationSingleFile, to=goodCaseOperationSingleFile, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@1f7d003f[responseCode=OPERATION_COMPLETED, responseText=<null>(default)], pillarID=Pillar-goodCaseOperationSingleFile, checksumRequestForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@4111bcd6[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], resultingChecksums=org.bitrepository.bitrepositoryelements.ResultingChecksums@b3013ba[resultAddress=<null>(default), checksumDataItems={org.bitrepository.bitrepositoryelements.ChecksumDataForChecksumSpecTYPE@470be906[fileID=DefaultFilegoodCaseOperationSingleFile, checksumValue={18,52,-52,-52,-52,-52,67,33}, calculationTimestamp=2017-02-21T15:33:58.721+01:00]}], partialResult=false]
        Step: Retrieve the ProgressResponse for the GetChecksums request
        Step: Retrieve the FinalResponse for the GetChecksums request
      Test success: goodCaseOperationSingleFile
        Added fixture: Initialize a new Pillar.
      Test starting: testRestrictions
        Description: Tests that the restrictions are correctly passed on to the cache.
        Step: Set up constants and variables.
        Step: Setup for only delivering result-set when the correct restrictions are given.
        Step: Create and send the actual GetChecksums message to the pillar.
          Result: Received message on TEST-TOPIC-testRestrictions-cibuild01 : org.bitrepository.bitrepositorymessages.GetChecksumsProgressResponse@7af20b4f[correlationID=d97c650c-d5e7-4ed9-abb7-47eb93dc951e, collectionID=TwoPillarCollection, destination=TEST-TOPIC-testRestrictions-cibuild01, replyTo=TEST-TOPIC-Pillar-testRestrictions-cibuild01-contributor, from=Pillar-testRestrictions, to=testRestrictions, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@37eb698b[responseCode=OPERATION_ACCEPTED_PROGRESS, responseText=Starting to calculate checksums.], pillarID=Pillar-testRestrictions, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@da92bf7[fileID=<null>(default), allFileIDs=true], checksumRequestForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@6b666548[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], resultAddress=<null>(default)]
          Result: Received message on TEST-TOPIC-testRestrictions-cibuild01 : org.bitrepository.bitrepositorymessages.GetChecksumsFinalResponse@1a4b318[correlationID=d97c650c-d5e7-4ed9-abb7-47eb93dc951e, collectionID=TwoPillarCollection, destination=TEST-TOPIC-testRestrictions-cibuild01, replyTo=TEST-TOPIC-Pillar-testRestrictions-cibuild01-contributor, from=Pillar-testRestrictions, to=testRestrictions, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@6d6f2596[responseCode=OPERATION_COMPLETED, responseText=<null>(default)], pillarID=Pillar-testRestrictions, checksumRequestForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@6b666548[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], resultingChecksums=org.bitrepository.bitrepositoryelements.ResultingChecksums@29dd4d5f[resultAddress=<null>(default), checksumDataItems={org.bitrepository.bitrepositoryelements.ChecksumDataForChecksumSpecTYPE@71c92109[fileID=DefaultFile, checksumValue={18,52,-52,-52,-52,-52,67,33}, calculationTimestamp=2017-02-21T15:33:58.947+01:00]}], partialResult=false]
        Step: Retrieve the ProgressResponse for the GetChecksums request
        Step: Retrieve the FinalResponse for the GetChecksums request
      Test success: testRestrictions
    Starting testcase GetFileIDsTest
        Added fixture: Initialize a new Pillar.
      Test starting: badCaseIdentification
        Description: Tests the identification for a GetFileIDs operation on the pillar for the failure scenario, when the file is missing.
        Step: Set up constants and variables.
        Step: Setup for delivering pillar id and not having the file 
        Step: Create and send the identify request message.
15:33:59.158 WARN  o.b.p.m.IdentifyPillarsForGetFileIDsRequestHandler - The following file is missing 'DefaultFilebadCaseIdentification' at collection 'TwoPillarCollection'.
          Result: Received message on TEST-TOPIC-badCaseIdentification-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForGetFileIDsResponse@79b67723[correlationID=d22346d3-878a-4ae5-ae0f-3b52d03247fc, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseIdentification-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseIdentification-cibuild01-contributor, from=Pillar-badCaseIdentification, to=badCaseIdentification, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@58a418a1[responseCode=FILE_NOT_FOUND_FAILURE, responseText=File not found.], pillarID=Pillar-badCaseIdentification, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@56e6ff40[fileID=DefaultFilebadCaseIdentification, allFileIDs=<null>(default)], timeToDeliver=<null>(default)]
        Step: Retrieve and validate the response getPillarID() the pillar.
      Test success: badCaseIdentification
        Added fixture: Initialize a new Pillar.
      Test starting: badCaseOperationNoFile
        Description: Tests the GetFileIDs functionality of the pillar for the failure scenario, where it does not have the file.
        Step: Set up constants and variables.
        Step: Setup for not having the file
        Step: Create and send the actual GetFileIDs message to the pillar.
15:34:00.397 WARN  o.b.p.m.GetFileIDsRequestHandler - The following file is missing 'DefaultFilebadCaseOperationNoFile' at collection 'TwoPillarCollection'.
          Result: Received message on TEST-TOPIC-badCaseOperationNoFile-cibuild01 : org.bitrepository.bitrepositorymessages.GetFileIDsFinalResponse@14aa3650[correlationID=113a99b3-350c-48ab-a7c0-d6dde947a004, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseOperationNoFile-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationNoFile-cibuild01-contributor, from=Pillar-badCaseOperationNoFile, to=badCaseOperationNoFile, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@6a3f4d8e[responseCode=FILE_NOT_FOUND_FAILURE, responseText=File not found.], pillarID=Pillar-badCaseOperationNoFile, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@493626bc[fileID=DefaultFilebadCaseOperationNoFile, allFileIDs=<null>(default)], resultingFileIDs=<null>(default), partialResult=<null>(default)]
15:34:00.404 WARN  o.b.p.m.GetFileIDsRequestHandler - The following file is missing 'DefaultFilebadCaseOperationNoFile' at collection 'TwoPillarCollection'.
          Result: Received message on TEST-TOPIC-badCaseOperationNoFile-cibuild01 : org.bitrepository.bitrepositorymessages.GetFileIDsFinalResponse@3a82ff5[correlationID=113a99b3-350c-48ab-a7c0-d6dde947a004, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseOperationNoFile-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationNoFile-cibuild01-contributor, from=Pillar-badCaseOperationNoFile, to=badCaseOperationNoFile, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@7bd3fafa[responseCode=FILE_NOT_FOUND_FAILURE, responseText=File not found.], pillarID=Pillar-badCaseOperationNoFile, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@493626bc[fileID=DefaultFilebadCaseOperationNoFile, allFileIDs=<null>(default)], resultingFileIDs=<null>(default), partialResult=<null>(default)]
15:34:00.406 WARN  o.b.p.m.GetFileIDsRequestHandler - The following file is missing 'DefaultFilebadCaseOperationNoFile' at collection 'TwoPillarCollection'.
          Result: Received message on TEST-TOPIC-badCaseOperationNoFile-cibuild01 : org.bitrepository.bitrepositorymessages.GetFileIDsFinalResponse@1112f441[correlationID=113a99b3-350c-48ab-a7c0-d6dde947a004, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseOperationNoFile-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationNoFile-cibuild01-contributor, from=Pillar-badCaseOperationNoFile, to=badCaseOperationNoFile, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@7572d8b3[responseCode=FILE_NOT_FOUND_FAILURE, responseText=File not found.], pillarID=Pillar-badCaseOperationNoFile, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@493626bc[fileID=DefaultFilebadCaseOperationNoFile, allFileIDs=<null>(default)], resultingFileIDs=<null>(default), partialResult=<null>(default)]
        Step: Retrieve the FinalResponse for the GetFileIDs request
      Test success: badCaseOperationNoFile
          Result: The following messages haven't been handled by the testcase: 
org.bitrepository.bitrepositorymessages.GetFileIDsFinalResponse@3a82ff5[correlationID=113a99b3-350c-48ab-a7c0-d6dde947a004, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseOperationNoFile-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationNoFile-cibuild01-contributor, from=Pillar-badCaseOperationNoFile, to=badCaseOperationNoFile, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@7bd3fafa[responseCode=FILE_NOT_FOUND_FAILURE, responseText=File not found.], pillarID=Pillar-badCaseOperationNoFile, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@493626bc[fileID=DefaultFilebadCaseOperationNoFile, allFileIDs=<null>(default)], resultingFileIDs=<null>(default), partialResult=<null>(default)]
org.bitrepository.bitrepositorymessages.GetFileIDsFinalResponse@1112f441[correlationID=113a99b3-350c-48ab-a7c0-d6dde947a004, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseOperationNoFile-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationNoFile-cibuild01-contributor, from=Pillar-badCaseOperationNoFile, to=badCaseOperationNoFile, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@7572d8b3[responseCode=FILE_NOT_FOUND_FAILURE, responseText=File not found.], pillarID=Pillar-badCaseOperationNoFile, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@493626bc[fileID=DefaultFilebadCaseOperationNoFile, allFileIDs=<null>(default)], resultingFileIDs=<null>(default), partialResult=<null>(default)]
15:34:01.409 WARN  o.b.protocol.bus.MessageReceiver - The following messages haven't been handled by the testcase: 
org.bitrepository.bitrepositorymessages.GetFileIDsFinalResponse@3a82ff5[correlationID=113a99b3-350c-48ab-a7c0-d6dde947a004, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseOperationNoFile-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationNoFile-cibuild01-contributor, from=Pillar-badCaseOperationNoFile, to=badCaseOperationNoFile, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@7bd3fafa[responseCode=FILE_NOT_FOUND_FAILURE, responseText=File not found.], pillarID=Pillar-badCaseOperationNoFile, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@493626bc[fileID=DefaultFilebadCaseOperationNoFile, allFileIDs=<null>(default)], resultingFileIDs=<null>(default), partialResult=<null>(default)]
org.bitrepository.bitrepositorymessages.GetFileIDsFinalResponse@1112f441[correlationID=113a99b3-350c-48ab-a7c0-d6dde947a004, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseOperationNoFile-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationNoFile-cibuild01-contributor, from=Pillar-badCaseOperationNoFile, to=badCaseOperationNoFile, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@7572d8b3[responseCode=FILE_NOT_FOUND_FAILURE, responseText=File not found.], pillarID=Pillar-badCaseOperationNoFile, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@493626bc[fileID=DefaultFilebadCaseOperationNoFile, allFileIDs=<null>(default)], resultingFileIDs=<null>(default), partialResult=<null>(default)]
        Added fixture: Initialize a new Pillar.
      Test starting: goodCaseIdentification
        Description: Tests the identification for a GetFileIDs operation on the pillar for the successful scenario.
        Step: Set up constants and variables.
        Step: Setup for having the file and delivering pillar id
        Step: Create and send the identify request message.
          Result: Received message on TEST-TOPIC-goodCaseIdentification-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForGetFileIDsResponse@7fd3df3c[correlationID=1ff3a7a4-5560-4adb-b5e4-dff7c8a381cb, collectionID=TwoPillarCollection, destination=TEST-TOPIC-goodCaseIdentification-cibuild01, replyTo=TEST-TOPIC-Pillar-goodCaseIdentification-cibuild01-contributor, from=Pillar-goodCaseIdentification, to=goodCaseIdentification, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@450458d7[responseCode=IDENTIFICATION_POSITIVE, responseText=Operation acknowledged and accepted.], pillarID=Pillar-goodCaseIdentification, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@6cfecf92[fileID=DefaultFilegoodCaseIdentification, allFileIDs=<null>(default)], timeToDeliver=org.bitrepository.bitrepositoryelements.TimeMeasureTYPE@379b92ee[timeMeasureUnit=MILLISECONDS, timeMeasureValue=1000]]
        Step: Retrieve and validate the response getPillarID() the pillar.
      Test success: goodCaseIdentification
    Starting testcase RecalculateChecksumWorkflowTest
        Added fixture: Initialize the Reference pillar cache with an empty file in default collection TwoPillarCollection
      Test starting: testWorkflowDoesNotRecalculateWhenNotNeeded
        Description: Test that the workflow does not recalculates the workflows, when the maximum age has not yet been met.
        Step: Create and run workflow
      Test success: testWorkflowDoesNotRecalculateWhenNotNeeded
        Added fixture: Initialize the Reference pillar cache with an empty file in default collection TwoPillarCollection
      Test starting: testWorkflowRecalculatesChecksum
        Description: Test that the workflow recalculates the workflows, when the maximum age has been met.
        Step: Create and run workflow
      Test success: testWorkflowRecalculatesChecksum
    Starting testcase GetFileTest
        Added fixture: Initialize a new Pillar.
      Test starting: badCaseIdentification
        Description: Tests the identification for a GetFile operation on the checksum pillar for the failure scenario, when the file is missing.
        Step: Set up constants and variables.
        Step: Setup for throwing an exception when asked to verify file existence
        Step: Create and send the identify request message.
          Result: Received message on TEST-TOPIC-badCaseIdentification-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForGetFileResponse@2856b10a[correlationID=0621837a-e7ca-4cd0-b7f2-fbfcaf27f0f0, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseIdentification-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseIdentification-cibuild01-contributor, from=Pillar-badCaseIdentification, to=badCaseIdentification, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@3108c627[responseCode=FILE_NOT_FOUND_FAILURE, responseText=File not found.], fileID=DefaultFilebadCaseIdentification, pillarID=Pillar-badCaseIdentification, timeToDeliver=<null>(default)]
        Step: Retrieve and validate the response getPillarID() the pillar.
      Test success: badCaseIdentification
        Added fixture: Initialize a new Pillar.
      Test starting: goodCaseIdentification
        Description: Tests the identification for a GetFile operation on the pillar for the successful scenario.
        Step: Set up constants and variables.
        Step: Setup for having the file and delivering pillar id
        Step: Create and send the identify request message.
          Result: Received message on TEST-TOPIC-goodCaseIdentification-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForGetFileResponse@7cd46301[correlationID=11ae5fb4-defe-4c77-aee4-61a317aa889c, collectionID=TwoPillarCollection, destination=TEST-TOPIC-goodCaseIdentification-cibuild01, replyTo=TEST-TOPIC-Pillar-goodCaseIdentification-cibuild01-contributor, from=Pillar-goodCaseIdentification, to=goodCaseIdentification, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@5544e0d9[responseCode=IDENTIFICATION_POSITIVE, responseText=Operation acknowledged and accepted.], fileID=DefaultFilegoodCaseIdentification, pillarID=Pillar-goodCaseIdentification, timeToDeliver=org.bitrepository.bitrepositoryelements.TimeMeasureTYPE@188da0e2[timeMeasureUnit=MILLISECONDS, timeMeasureValue=1000]]
        Step: Retrieve and validate the response getPillarID() the pillar.
      Test success: goodCaseIdentification
    Starting testcase PutFileTest
        Added fixture: Initialize a new Pillar.
      Test starting: badCaseIdentification
        Description: Tests the identification for a PutFile operation on the pillar for the failure scenario, when the file already exists.
        Step: Set up constants and variables.
        Step: Setup for already having the file and delivering pillar id
        Step: Create and send the identify request message.
          Result: Received message on TEST-TOPIC-badCaseIdentification-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForPutFileResponse@ff0375e[correlationID=f5efab68-234f-4b30-8a71-d476f623de4e, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseIdentification-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseIdentification-cibuild01-contributor, from=Pillar-badCaseIdentification, to=badCaseIdentification, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@6ccfdead[responseCode=DUPLICATE_FILE_FAILURE, responseText=<null>(default)], pillarID=Pillar-badCaseIdentification, fileID=DefaultFilebadCaseIdentification, pillarChecksumSpec=<null>(default), checksumDataForExistingFile=<null>(default), timeToDeliver=org.bitrepository.bitrepositoryelements.TimeMeasureTYPE@6a20c1b6[timeMeasureUnit=MILLISECONDS, timeMeasureValue=1000]]
        Step: Retrieve and validate the response getPillarID() the pillar.
      Test success: badCaseIdentification
        Added fixture: Initialize a new Pillar.
      Test starting: badCaseOperationFileAlreadyExists
        Description: Tests the PutFile operation on the pillar for the failure scenario, when the file already exists.
        Step: Set up constants and variables.
        Step: Setup for already having the file and delivering pillar id
        Step: Create and send the identify request message.
          Result: Received message on TEST-TOPIC-badCaseOperationFileAlreadyExists-cibuild01 : org.bitrepository.bitrepositorymessages.PutFileFinalResponse@6b4e1ef6[correlationID=fa0d73bf-a21c-425b-be77-e060f0ef037f, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseOperationFileAlreadyExists-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationFileAlreadyExists-cibuild01-contributor, from=Pillar-badCaseOperationFileAlreadyExists, to=badCaseOperationFileAlreadyExists, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@446df579[responseCode=DUPLICATE_FILE_FAILURE, responseText=We already have the file], pillarID=Pillar-badCaseOperationFileAlreadyExists, pillarChecksumSpec=<null>(default), fileID=DefaultFilebadCaseOperationFileAlreadyExists, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, checksumDataForNewFile=<null>(default), checksumDataForExistingFile=<null>(default)]
        Step: Retrieve the FinalResponse for the PutFile request
      Test success: badCaseOperationFileAlreadyExists
        Added fixture: Initialize a new Pillar.
      Test starting: badCasePutOperationNoValidationChecksum
        Description: Tests the PutFile operation on the pillar for the failure scenario, when no validation checksum is given but required.
        Step: Set up constants and variables.
        Step: Setup for not already having the file and delivering pillar id
        Step: Create and send the identify request message.
          Result: Received message on TEST-TOPIC-badCasePutOperationNoValidationChecksum-cibuild01 : org.bitrepository.bitrepositorymessages.PutFileFinalResponse@2c48905f[correlationID=7dd4369d-8c8b-49a1-9e72-686359257c66, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCasePutOperationNoValidationChecksum-cibuild01, replyTo=TEST-TOPIC-Pillar-badCasePutOperationNoValidationChecksum-cibuild01-contributor, from=Pillar-badCasePutOperationNoValidationChecksum, to=badCasePutOperationNoValidationChecksum, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@2b3fe9e[responseCode=NEW_FILE_CHECKSUM_FAILURE, responseText=A checksum is required for the PutFile operation to be performed.], pillarID=Pillar-badCasePutOperationNoValidationChecksum, pillarChecksumSpec=<null>(default), fileID=DefaultFilebadCasePutOperationNoValidationChecksum, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, checksumDataForNewFile=<null>(default), checksumDataForExistingFile=<null>(default)]
15:34:08.487 WARN  o.b.p.common.PillarAlarmDispatcher - Sending alarm: org.bitrepository.bitrepositoryelements.Alarm@4361eb5b[origDateTime=2017-02-21T15:34:08.486+01:00, alarmCode=CHECKSUM_ALARM, alarmRaiser=Pillar-badCasePutOperationNoValidationChecksum, alarmText=A checksum is required for the PutFile operation to be performed., fileID=DefaultFilebadCasePutOperationNoValidationChecksum, collectionID=TwoPillarCollection]
          Result: Received message on TEST-ALARM-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.AlarmMessage@587da660[correlationID=04f98f24-c900-4bb1-b99d-8b5261eca4a8, collectionID=TwoPillarCollection, destination=TEST-ALARM-TOPIC-cibuild01, replyTo=TEST-TOPIC-Pillar-badCasePutOperationNoValidationChecksum-cibuild01-contributor, from=Pillar-badCasePutOperationNoValidationChecksum, to=<null>(default), version=30, minVersion=24, alarm=org.bitrepository.bitrepositoryelements.Alarm@4361eb5b[origDateTime=2017-02-21T15:34:08.486+01:00, alarmCode=CHECKSUM_ALARM, alarmRaiser=Pillar-badCasePutOperationNoValidationChecksum, alarmText=A checksum is required for the PutFile operation to be performed., fileID=DefaultFilebadCasePutOperationNoValidationChecksum, collectionID=TwoPillarCollection]]
        Step: Retrieve the FinalResponse for the PutFile request
        Step: Pillar should have sent an alarm
      Test success: badCasePutOperationNoValidationChecksum
        Added fixture: Initialize a new Pillar.
      Test starting: goodCaseIdentification
        Description: Tests the identification for a PutFile operation on the pillar for the successful scenario.
        Step: Set up constants and variables.
        Step: Setup for not already having the file and delivering pillar id
        Step: Create and send the identify request message.
          Result: Received message on TEST-TOPIC-goodCaseIdentification-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForPutFileResponse@5cd2d738[correlationID=5f1ba92d-f656-49b4-8f5b-6e2a55b77754, collectionID=TwoPillarCollection, destination=TEST-TOPIC-goodCaseIdentification-cibuild01, replyTo=TEST-TOPIC-Pillar-goodCaseIdentification-cibuild01-contributor, from=Pillar-goodCaseIdentification, to=goodCaseIdentification, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@2ce8ce50[responseCode=IDENTIFICATION_POSITIVE, responseText=Operation acknowledged and accepted.], pillarID=Pillar-goodCaseIdentification, fileID=DefaultFilegoodCaseIdentification, pillarChecksumSpec=<null>(default), checksumDataForExistingFile=<null>(default), timeToDeliver=org.bitrepository.bitrepositoryelements.TimeMeasureTYPE@3e386977[timeMeasureUnit=MILLISECONDS, timeMeasureValue=1000]]
        Step: Retrieve and validate the response getPillarID() the pillar.
      Test success: goodCaseIdentification
        Added fixture: Initialize a new Pillar.
      Test starting: goodCaseOperationWithChecksumReturn
        Description: Tests the PutFile operation on the pillar for the success scenario, when requesting the cheksum of the file returned.
        Step: Set up constants and variables.
        Step: Setup for not already having the file and delivering pillar id, and delivering an answer for the checksum request
        Step: Create and send the identify request message.
          Result: Received message on TEST-TOPIC-goodCaseOperationWithChecksumReturn-cibuild01 : org.bitrepository.bitrepositorymessages.PutFileProgressResponse@61d99b13[correlationID=8d1c512a-7c9e-40cd-9f40-0bd80fb82341, collectionID=TwoPillarCollection, destination=TEST-TOPIC-goodCaseOperationWithChecksumReturn-cibuild01, replyTo=TEST-TOPIC-Pillar-goodCaseOperationWithChecksumReturn-cibuild01-contributor, from=Pillar-goodCaseOperationWithChecksumReturn, to=goodCaseOperationWithChecksumReturn, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@cb06ab3[responseCode=OPERATION_ACCEPTED_PROGRESS, responseText=Started to receive data.], pillarID=Pillar-goodCaseOperationWithChecksumReturn, pillarChecksumSpec=<null>(default), fileID=DefaultFilegoodCaseOperationWithChecksumReturn, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt]
          Result: Received message on TEST-TOPIC-goodCaseOperationWithChecksumReturn-cibuild01 : org.bitrepository.bitrepositorymessages.PutFileFinalResponse@22f18203[correlationID=8d1c512a-7c9e-40cd-9f40-0bd80fb82341, collectionID=TwoPillarCollection, destination=TEST-TOPIC-goodCaseOperationWithChecksumReturn-cibuild01, replyTo=TEST-TOPIC-Pillar-goodCaseOperationWithChecksumReturn-cibuild01-contributor, from=Pillar-goodCaseOperationWithChecksumReturn, to=goodCaseOperationWithChecksumReturn, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@f5d944d[responseCode=OPERATION_COMPLETED, responseText=<null>(default)], pillarID=Pillar-goodCaseOperationWithChecksumReturn, pillarChecksumSpec=<null>(default), fileID=DefaultFilegoodCaseOperationWithChecksumReturn, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, checksumDataForNewFile=org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@3782e7[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@1485c38d[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], checksumValue={18,52,-52,-52,-52,-52,67,33}, calculationTimestamp=2017-02-21T15:34:09.943+01:00], checksumDataForExistingFile=<null>(default)]
        Step: Retrieve the ProgressResponse for the GetFileIDs request
        Step: Retrieve the FinalResponse for the PutFile request
      Test success: goodCaseOperationWithChecksumReturn
      Test starting: componentIDTest
      Test success: componentIDTest
      Test starting: getPillarCollectionsTest
      Test success: getPillarCollectionsTest
      Finished testcase
  Finished suite
Finished project
Tests run: 64, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 60.938 sec - in TestSuite

Results :

Tests run: 64, Failures: 0, Errors: 0, Skipped: 0

[JENKINS] Recording test results
[INFO] 
[INFO] --- jacoco-maven-plugin:0.7.5.201505241946:report (report) @ bitrepository-reference-pillar ---
[INFO] Analyzed bundle 'Bitrepository Reference Pillar' with 43 classes
[INFO] 
[INFO] --- maven-jar-plugin:2.4:jar (default-jar) @ bitrepository-reference-pillar ---
[INFO] Building jar: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-reference-pillar/target/bitrepository-reference-pillar-1.9-SNAPSHOT.jar
[INFO] 
[INFO] --- maven-jar-plugin:2.4:test-jar (default) @ bitrepository-reference-pillar ---
[INFO] Building jar: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-reference-pillar/target/bitrepository-reference-pillar-1.9-SNAPSHOT-tests.jar
[INFO] 
[INFO] --- maven-source-plugin:2.2.1:jar-no-fork (attach-sources-no-fork) @ bitrepository-reference-pillar ---
[INFO] Building jar: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-reference-pillar/target/bitrepository-reference-pillar-1.9-SNAPSHOT-sources.jar
[INFO] 
[INFO] --- maven-assembly-plugin:2.4:single (distribution) @ bitrepository-reference-pillar ---
[INFO] Reading assembly descriptor: src/main/assembly/assembly.xml
[INFO] Reading assembly descriptor: src/test/assembly/assembly.xml
[INFO] Reading assembly descriptor: src/main/assembly/deploy-assembly.xml
[INFO] Reading assembly descriptor: src/test/assembly/test-deploy-assembly.xml
[INFO] Building tar: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-reference-pillar/target/bitrepository-reference-pillar-1.9-SNAPSHOT-distribution.tar.gz
[INFO] Building tar: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-reference-pillar/target/bitrepository-reference-pillar-1.9-SNAPSHOT-acceptance-test.tar.gz
[WARNING] Entry: bitrepository-reference-pillar-1.9-SNAPSHOT/lib/bitrepository-reference-pillar-1.9-SNAPSHOT-tests.jar longer than 100 characters.
[WARNING] Resulting tar file can only be processed successfully by GNU compatible tar commands
[INFO] Building tar: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-reference-pillar/target/bitrepository-reference-pillar-1.9-SNAPSHOT-deploy.tar.gz
[INFO] Building tar: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-reference-pillar/target/bitrepository-reference-pillar-1.9-SNAPSHOT-acceptance-test-deploy.tar.gz
[INFO] 
[INFO] --- maven-install-plugin:2.5.1:install (default-install) @ bitrepository-reference-pillar ---
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-reference-pillar/target/bitrepository-reference-pillar-1.9-SNAPSHOT.jar to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-SNAPSHOT.jar
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-reference-pillar/pom.xml to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-SNAPSHOT.pom
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-reference-pillar/target/bitrepository-reference-pillar-1.9-SNAPSHOT-tests.jar to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-SNAPSHOT-tests.jar
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-reference-pillar/target/bitrepository-reference-pillar-1.9-SNAPSHOT-sources.jar to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-SNAPSHOT-sources.jar
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-reference-pillar/target/bitrepository-reference-pillar-1.9-SNAPSHOT-distribution.tar.gz to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-SNAPSHOT-distribution.tar.gz
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-reference-pillar/target/bitrepository-reference-pillar-1.9-SNAPSHOT-acceptance-test.tar.gz to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-SNAPSHOT-acceptance-test.tar.gz
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-reference-pillar/target/bitrepository-reference-pillar-1.9-SNAPSHOT-deploy.tar.gz to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-SNAPSHOT-deploy.tar.gz
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-reference-pillar/target/bitrepository-reference-pillar-1.9-SNAPSHOT-acceptance-test-deploy.tar.gz to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-SNAPSHOT-acceptance-test-deploy.tar.gz
[INFO] 
[INFO] --- maven-deploy-plugin:2.8.1:deploy (default-deploy) @ bitrepository-reference-pillar ---
[INFO] Downloading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Downloaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/maven-metadata.xml (3 KB at 79.6 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-20170221.143417-12.jar
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-20170221.143417-12.jar (128 KB at 2764.0 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-20170221.143417-12.pom
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-20170221.143417-12.pom (8 KB at 177.6 KB/sec)
[INFO] Downloading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/maven-metadata.xml
[INFO] Downloaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/maven-metadata.xml (455 B at 27.8 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/maven-metadata.xml (3 KB at 66.8 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/maven-metadata.xml (455 B at 14.3 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-20170221.143417-12-tests.jar
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-20170221.143417-12-tests.jar (238 KB at 3704.0 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/maven-metadata.xml (3 KB at 69.0 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-20170221.143417-12-sources.jar
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-20170221.143417-12-sources.jar (104 KB at 2652.4 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/maven-metadata.xml (3 KB at 86.2 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-20170221.143417-12-distribution.tar.gz
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-20170221.143417-12-distribution.tar.gz (13313 KB at 23192.8 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/maven-metadata.xml (3 KB at 71.4 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-20170221.143417-12-acceptance-test.tar.gz
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-20170221.143417-12-acceptance-test.tar.gz (12948 KB at 22246.9 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/maven-metadata.xml (3 KB at 16.7 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-20170221.143417-12-deploy.tar.gz
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-20170221.143417-12-deploy.tar.gz (4 KB at 110.0 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/maven-metadata.xml (3 KB at 69.0 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-20170221.143417-12-acceptance-test-deploy.tar.gz
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-20170221.143417-12-acceptance-test-deploy.tar.gz (4 KB at 102.7 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/maven-metadata.xml (3 KB at 69.0 KB/sec)
[JENKINS] Archiving disabled
[INFO]                                                                         
[INFO] ------------------------------------------------------------------------
[INFO] Building Bitrepository Monitoring Service 1.9-SNAPSHOT
[INFO] ------------------------------------------------------------------------
[INFO] 
[INFO] --- maven-clean-plugin:2.5:clean (default-clean) @ bitrepository-monitoring-service ---
[INFO] Deleting /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-monitoring-service/target
[INFO] 
[INFO] --- jacoco-maven-plugin:0.7.5.201505241946:prepare-agent (default) @ bitrepository-monitoring-service ---
[INFO] argLine set to -javaagent:/home/cibuild01/.m2/repository/org/jacoco/org.jacoco.agent/0.7.5.201505241946/org.jacoco.agent-0.7.5.201505241946-runtime.jar=destfile=/home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-monitoring-service/target/jacoco.exec
[INFO] 
[INFO] --- maven-resources-plugin:2.6:resources (default-resources) @ bitrepository-monitoring-service ---
[INFO] Using 'UTF-8' encoding to copy filtered resources.
[INFO] skip non existing resourceDirectory /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-monitoring-service/src/main/resources
[INFO] 
[INFO] --- maven-compiler-plugin:3.1:compile (default-compile) @ bitrepository-monitoring-service ---
[INFO] Changes detected - recompiling the module!
[INFO] Compiling 14 source files to /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-monitoring-service/target/classes
[INFO] 
[INFO] --- maven-resources-plugin:2.6:testResources (default-testResources) @ bitrepository-monitoring-service ---
[INFO] Using 'UTF-8' encoding to copy filtered resources.
[INFO] skip non existing resourceDirectory /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-monitoring-service/src/test/resources
[INFO] 
[INFO] --- maven-compiler-plugin:3.1:testCompile (default-testCompile) @ bitrepository-monitoring-service ---
[INFO] Changes detected - recompiling the module!
[INFO] Compiling 7 source files to /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-monitoring-service/target/test-classes
[INFO] 
[INFO] --- maven-surefire-plugin:2.17:test (default-test) @ bitrepository-monitoring-service ---
[INFO] Surefire report directory: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-monitoring-service/target/surefire-reports

-------------------------------------------------------
 T E S T S
-------------------------------------------------------
Running TestSuite
Configuring TestNG with: TestNG652Configurator
Starting test project Core module test
  Suite: Surefire suite
    Starting testcase MonitorAlerterTest
      Test starting: testMonitorAlerter
        Description: Tests the org.bitrepository.monitoringservice.alarm.BasicMonitoringServiceAlerter
        Step: Setup
        Step: Create the alerter, but ignore the part of actually sending the alarms. Just log it.
        Step: Check statuses with an empty map.
        Step: Check the status when a positive entry exists.
        Step: Check the status when a negative entry exists.
15:34:28.262 WARN  o.b.m.a.BasicMonitoringServiceAlerter - Sending alarm: org.bitrepository.bitrepositoryelements.Alarm@57416e49[origDateTime=2017-02-21T15:34:28.234+01:00, alarmCode=COMPONENT_FAILURE, alarmRaiser=MonitorAlerterUnderTest, alarmText=The following components have become unresponsive: [TestMonitorService], fileID=<null>(default), collectionID=<null>(default)]
          Result: Received message on TEST-ALARM-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.AlarmMessage@75dd0f94[correlationID=9259e76a-3f78-4bd7-807a-eaa982c71049, collectionID=<null>(default), destination=TEST-ALARM-TOPIC-cibuild01, replyTo=TEST-TOPIC-MonitorAlerterUnderTest-cibuild01-contributor, from=MonitorAlerterUnderTest, to=<null>(default), version=30, minVersion=24, alarm=org.bitrepository.bitrepositoryelements.Alarm@57416e49[origDateTime=2017-02-21T15:34:28.234+01:00, alarmCode=COMPONENT_FAILURE, alarmRaiser=MonitorAlerterUnderTest, alarmText=The following components have become unresponsive: [TestMonitorService], fileID=<null>(default), collectionID=<null>(default)]]
      Test success: testMonitorAlerter
    Starting testcase StatusCollectorTest
      Test starting: testStatusCollector
        Description: Tests the status collector.
        Step: Setup
        Step: Create the collector
        Step: Start the collector
        Step: wait 2 * the interval
        Step: wait the interval + delay again
      Test success: testStatusCollector
    Starting testcase ComponentStatusStoreTest
      Test starting: testComponentStatus
        Description: Tests the compontent status
        Step: Setup
        Step: Validate the initial content
        Step: Update the replay counts and validate 
        Step: Test what happens when an invalid component id attempted to be updated.
15:34:31.035 WARN  o.b.m.status.ComponentStatusStore - Got status from an unexpected component: BAD-COMPONENT-ID
        Step: Try giving it a positive status
      Test success: testComponentStatus
    Starting testcase StatusEventHandlerTest
      Test starting: testStatusEventHandler
        Description: Test the GetStatusEventHandler handling of events
        Step: Setup
        Step: Validate initial calls to the mocks
        Step: Test an unhandled event.
        Step: Test the Complete event
        Step: Test the Failed event
        Step: Test the component complete status
      Test success: testStatusEventHandler
      Finished testcase
  Finished suite
Finished project
Tests run: 4, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 9.52 sec - in TestSuite

Results :

Tests run: 4, Failures: 0, Errors: 0, Skipped: 0

[JENKINS] Recording test results
[INFO] 
[INFO] --- jacoco-maven-plugin:0.7.5.201505241946:report (report) @ bitrepository-monitoring-service ---
[INFO] Analyzed bundle 'Bitrepository Monitoring Service' with 14 classes
[INFO] 
[INFO] --- maven-war-plugin:2.4:war (default-war) @ bitrepository-monitoring-service ---
[INFO] Packaging webapp
[INFO] Assembling webapp [bitrepository-monitoring-service] in [/home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-monitoring-service/target/bitrepository-monitoring-service-1.9-SNAPSHOT]
[INFO] Processing war project
[INFO] Copying webapp resources [/home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-monitoring-service/src/main/webapp]
[INFO] Webapp assembled in [137 msecs]
[INFO] Building war: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-monitoring-service/target/bitrepository-monitoring-service-1.9-SNAPSHOT.war
[INFO] 
[INFO] --- maven-jar-plugin:2.4:test-jar (default) @ bitrepository-monitoring-service ---
[INFO] Building jar: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-monitoring-service/target/bitrepository-monitoring-service-1.9-SNAPSHOT-tests.jar
[INFO] 
[INFO] --- maven-source-plugin:2.2.1:jar-no-fork (attach-sources-no-fork) @ bitrepository-monitoring-service ---
[INFO] Building jar: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-monitoring-service/target/bitrepository-monitoring-service-1.9-SNAPSHOT-sources.jar
[INFO] 
[INFO] --- maven-assembly-plugin:2.4:single (distribution) @ bitrepository-monitoring-service ---
[INFO] Reading assembly descriptor: src/main/assembly/assembly.xml
[INFO] Building tar: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-monitoring-service/target/bitrepository-monitoring-service-1.9-SNAPSHOT-distribution.tar.gz
[INFO] 
[INFO] --- maven-install-plugin:2.5.1:install (default-install) @ bitrepository-monitoring-service ---
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-monitoring-service/target/bitrepository-monitoring-service-1.9-SNAPSHOT.war to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/bitrepository-monitoring-service-1.9-SNAPSHOT.war
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-monitoring-service/pom.xml to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/bitrepository-monitoring-service-1.9-SNAPSHOT.pom
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-monitoring-service/target/bitrepository-monitoring-service-1.9-SNAPSHOT-tests.jar to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/bitrepository-monitoring-service-1.9-SNAPSHOT-tests.jar
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-monitoring-service/target/bitrepository-monitoring-service-1.9-SNAPSHOT-sources.jar to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/bitrepository-monitoring-service-1.9-SNAPSHOT-sources.jar
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-monitoring-service/target/bitrepository-monitoring-service-1.9-SNAPSHOT-distribution.tar.gz to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/bitrepository-monitoring-service-1.9-SNAPSHOT-distribution.tar.gz
[INFO] 
[INFO] --- maven-deploy-plugin:2.8.1:deploy (default-deploy) @ bitrepository-monitoring-service ---
[INFO] Downloading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Downloaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/maven-metadata.xml (2 KB at 59.0 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/bitrepository-monitoring-service-1.9-20170221.143435-12.war
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/bitrepository-monitoring-service-1.9-20170221.143435-12.war (18063 KB at 22326.9 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/bitrepository-monitoring-service-1.9-20170221.143435-12.pom
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/bitrepository-monitoring-service-1.9-20170221.143435-12.pom (4 KB at 110.3 KB/sec)
[INFO] Downloading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/maven-metadata.xml
[INFO] Downloaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/maven-metadata.xml (457 B at 22.3 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/maven-metadata.xml (2 KB at 39.4 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/maven-metadata.xml (457 B at 17.2 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/bitrepository-monitoring-service-1.9-20170221.143435-12-tests.jar
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/bitrepository-monitoring-service-1.9-20170221.143435-12-tests.jar (15 KB at 308.4 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/maven-metadata.xml (2 KB at 50.6 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/bitrepository-monitoring-service-1.9-20170221.143435-12-sources.jar
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/bitrepository-monitoring-service-1.9-20170221.143435-12-sources.jar (19 KB at 467.9 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/maven-metadata.xml (2 KB at 48.9 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/bitrepository-monitoring-service-1.9-20170221.143435-12-distribution.tar.gz
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/bitrepository-monitoring-service-1.9-20170221.143435-12-distribution.tar.gz (18061 KB at 23243.6 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/maven-metadata.xml (2 KB at 59.0 KB/sec)
[JENKINS] Archiving disabled
[INFO]                                                                         
[INFO] ------------------------------------------------------------------------
[INFO] Building Bitrepository Webclient 1.9-SNAPSHOT
[INFO] ------------------------------------------------------------------------
[INFO] 
[INFO] --- maven-clean-plugin:2.5:clean (default-clean) @ bitrepository-webclient ---
[INFO] Deleting /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-webclient/target
[INFO] 
[INFO] --- jacoco-maven-plugin:0.7.5.201505241946:prepare-agent (default) @ bitrepository-webclient ---
[INFO] argLine set to -javaagent:/home/cibuild01/.m2/repository/org/jacoco/org.jacoco.agent/0.7.5.201505241946/org.jacoco.agent-0.7.5.201505241946-runtime.jar=destfile=/home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-webclient/target/jacoco.exec
[INFO] 
[INFO] --- maven-resources-plugin:2.6:resources (default-resources) @ bitrepository-webclient ---
[INFO] Using 'UTF-8' encoding to copy filtered resources.
[INFO] Copying 2 resources
[INFO] 
[INFO] --- maven-compiler-plugin:3.1:compile (default-compile) @ bitrepository-webclient ---
[INFO] Changes detected - recompiling the module!
[INFO] Compiling 12 source files to /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-webclient/target/classes
[INFO] 
[INFO] --- maven-resources-plugin:2.6:testResources (default-testResources) @ bitrepository-webclient ---
[INFO] Using 'UTF-8' encoding to copy filtered resources.
[INFO] skip non existing resourceDirectory /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-webclient/src/test/resources
[INFO] 
[INFO] --- maven-compiler-plugin:3.1:testCompile (default-testCompile) @ bitrepository-webclient ---
[INFO] No sources to compile
[INFO] 
[INFO] --- maven-surefire-plugin:2.17:test (default-test) @ bitrepository-webclient ---
[INFO] No tests to run.
[JENKINS] Recording test results[INFO] 
[INFO] --- jacoco-maven-plugin:0.7.5.201505241946:report (report) @ bitrepository-webclient ---
[INFO] Skipping JaCoCo execution due to missing execution data file:/home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-webclient/target/jacoco.exec

[INFO] 
[INFO] --- maven-war-plugin:2.4:war (default-war) @ bitrepository-webclient ---
[INFO] Packaging webapp
[INFO] Assembling webapp [bitrepository-webclient] in [/home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-webclient/target/bitrepository-webclient-1.9-SNAPSHOT]
[INFO] Processing war project
[INFO] Copying webapp webResources [/home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-webclient/src/main/webapp] to [/home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-webclient/target/bitrepository-webclient-1.9-SNAPSHOT]
[INFO] Copying webapp resources [/home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-webclient/src/main/webapp]
[INFO] Webapp assembled in [729 msecs]
[INFO] Building war: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-webclient/target/bitrepository-webclient-1.9-SNAPSHOT.war
[INFO] 
[INFO] --- maven-jar-plugin:2.4:test-jar (default) @ bitrepository-webclient ---
[WARNING] JAR will be empty - no content was marked for inclusion!
[INFO] Building jar: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-webclient/target/bitrepository-webclient-1.9-SNAPSHOT-tests.jar
[INFO] 
[INFO] --- maven-source-plugin:2.2.1:jar-no-fork (attach-sources-no-fork) @ bitrepository-webclient ---
[INFO] Building jar: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-webclient/target/bitrepository-webclient-1.9-SNAPSHOT-sources.jar
[INFO] 
[INFO] --- maven-assembly-plugin:2.4:single (distribution) @ bitrepository-webclient ---
[INFO] Reading assembly descriptor: src/main/assembly/assembly.xml
[INFO] Building tar: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-webclient/target/bitrepository-webclient-1.9-SNAPSHOT-distribution.tar.gz
[INFO] 
[INFO] --- maven-install-plugin:2.5.1:install (default-install) @ bitrepository-webclient ---
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-webclient/target/bitrepository-webclient-1.9-SNAPSHOT.war to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/bitrepository-webclient-1.9-SNAPSHOT.war
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-webclient/pom.xml to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/bitrepository-webclient-1.9-SNAPSHOT.pom
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-webclient/target/bitrepository-webclient-1.9-SNAPSHOT-tests.jar to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/bitrepository-webclient-1.9-SNAPSHOT-tests.jar
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-webclient/target/bitrepository-webclient-1.9-SNAPSHOT-sources.jar to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/bitrepository-webclient-1.9-SNAPSHOT-sources.jar
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-webclient/target/bitrepository-webclient-1.9-SNAPSHOT-distribution.tar.gz to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/bitrepository-webclient-1.9-SNAPSHOT-distribution.tar.gz
[INFO] 
[INFO] --- maven-deploy-plugin:2.8.1:deploy (default-deploy) @ bitrepository-webclient ---
[INFO] Downloading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Downloaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/maven-metadata.xml (2 KB at 78.2 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/bitrepository-webclient-1.9-20170221.143441-12.war
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/bitrepository-webclient-1.9-20170221.143441-12.war (12467 KB at 23129.4 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/bitrepository-webclient-1.9-20170221.143441-12.pom
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/bitrepository-webclient-1.9-20170221.143441-12.pom (3 KB at 91.6 KB/sec)
[INFO] Downloading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/maven-metadata.xml
[INFO] Downloaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/maven-metadata.xml (448 B at 16.2 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/maven-metadata.xml (2 KB at 52.2 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/maven-metadata.xml (448 B at 10.7 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/bitrepository-webclient-1.9-20170221.143441-12-tests.jar
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/bitrepository-webclient-1.9-20170221.143441-12-tests.jar (3 KB at 70.1 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/maven-metadata.xml (2 KB at 48.6 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/bitrepository-webclient-1.9-20170221.143441-12-sources.jar
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/bitrepository-webclient-1.9-20170221.143441-12-sources.jar (17 KB at 440.5 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/maven-metadata.xml (2 KB at 48.6 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/bitrepository-webclient-1.9-20170221.143441-12-distribution.tar.gz
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/bitrepository-webclient-1.9-20170221.143441-12-distribution.tar.gz (12462 KB at 21748.2 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/maven-metadata.xml (2 KB at 58.7 KB/sec)
[JENKINS] Archiving disabled
[INFO]                                                                         
[INFO] ------------------------------------------------------------------------
[INFO] Building Bitrepository Integration 1.9-SNAPSHOT
[INFO] ------------------------------------------------------------------------
[INFO] Downloading: https://sbforge.org/nexus/content/groups/public/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-20170221.143417-12-distribution.tar.gz
[INFO] Downloading: https://sbforge.org/nexus/content/groups/public/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-20170221.143417-12-tests.jar
[INFO] Downloaded: https://sbforge.org/nexus/content/groups/public/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-20170221.143417-12-tests.jar (238 KB at 2419.0 KB/sec)
[INFO] Downloaded: https://sbforge.org/nexus/content/groups/public/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-20170221.143417-12-distribution.tar.gz (13313 KB at 12825.3 KB/sec)
[INFO] 
[INFO] --- maven-clean-plugin:2.5:clean (default-clean) @ bitrepository-integration ---
[INFO] Deleting /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-integration/target
[INFO] 
[INFO] --- jacoco-maven-plugin:0.7.5.201505241946:prepare-agent (default) @ bitrepository-integration ---
[INFO] argLine set to -javaagent:/home/cibuild01/.m2/repository/org/jacoco/org.jacoco.agent/0.7.5.201505241946/org.jacoco.agent-0.7.5.201505241946-runtime.jar=destfile=/home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-integration/target/jacoco.exec
[INFO] 
[INFO] --- maven-resources-plugin:2.6:resources (default-resources) @ bitrepository-integration ---
[INFO] Using 'UTF-8' encoding to copy filtered resources.
[INFO] Copying 33 resources
[INFO] 
[INFO] --- maven-compiler-plugin:3.1:compile (default-compile) @ bitrepository-integration ---
[INFO] No sources to compile
[INFO] 
[INFO] --- maven-resources-plugin:2.6:testResources (default-testResources) @ bitrepository-integration ---
[INFO] Using 'UTF-8' encoding to copy filtered resources.
[INFO] Copying 1 resource
[INFO] 
[INFO] --- maven-compiler-plugin:3.1:testCompile (default-testCompile) @ bitrepository-integration ---
[INFO] No sources to compile
[INFO] 
[INFO] --- maven-surefire-plugin:2.17:test (default-test) @ bitrepository-integration ---
[JENKINS] Recording test results
[INFO] 
[INFO] --- jacoco-maven-plugin:0.7.5.201505241946:report (report) @ bitrepository-integration ---
[INFO] Skipping JaCoCo execution due to missing execution data file:/home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-integration/target/jacoco.exec
[INFO] 
[INFO] --- maven-jar-plugin:2.4:jar (default-jar) @ bitrepository-integration ---
[INFO] Building jar: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-integration/target/bitrepository-integration-1.9-SNAPSHOT.jar
[INFO] 
[INFO] --- maven-jar-plugin:2.4:test-jar (default) @ bitrepository-integration ---
[INFO] Building jar: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-integration/target/bitrepository-integration-1.9-SNAPSHOT-tests.jar
[INFO] 
[INFO] --- maven-source-plugin:2.2.1:jar-no-fork (attach-sources-no-fork) @ bitrepository-integration ---
[INFO] Building jar: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-integration/target/bitrepository-integration-1.9-SNAPSHOT-sources.jar
[INFO] 
[INFO] --- maven-assembly-plugin:2.4:single (make-assembly) @ bitrepository-integration ---
[INFO] Reading assembly descriptor: src/main/assembly/assembly.xml
[INFO] Reading assembly descriptor: src/main/assembly/tools-assembly.xml
[INFO] Downloading: https://sbforge.org/nexus/content/groups/public/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-20170221.143417-12.pom
[INFO] Downloaded: https://sbforge.org/nexus/content/groups/public/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-20170221.143417-12.pom (8 KB at 161.8 KB/sec)
[INFO] Building tar: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-integration/target/bitrepository-integration-1.9-SNAPSHOT-quickstart.tar.gz
[INFO] Building tar: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-integration/target/bitrepository-integration-1.9-SNAPSHOT-tools.tar.gz
[WARNING] Entry: bitrepository-integration-1.9-SNAPSHOT/lib/bitrepository-reference-pillar-1.9-20170221.143417-12-distribution.tar.gz longer than 100 characters.
[WARNING] Resulting tar file can only be processed successfully by GNU compatible tar commands
[INFO] 
[INFO] --- maven-install-plugin:2.5.1:install (default-install) @ bitrepository-integration ---
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-integration/target/bitrepository-integration-1.9-SNAPSHOT.jar to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/bitrepository-integration-1.9-SNAPSHOT.jar
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-integration/pom.xml to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/bitrepository-integration-1.9-SNAPSHOT.pom
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-integration/target/bitrepository-integration-1.9-SNAPSHOT-tests.jar to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/bitrepository-integration-1.9-SNAPSHOT-tests.jar
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-integration/target/bitrepository-integration-1.9-SNAPSHOT-sources.jar to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/bitrepository-integration-1.9-SNAPSHOT-sources.jar
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-integration/target/bitrepository-integration-1.9-SNAPSHOT-quickstart.tar.gz to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/bitrepository-integration-1.9-SNAPSHOT-quickstart.tar.gz
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-integration/target/bitrepository-integration-1.9-SNAPSHOT-tools.tar.gz to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/bitrepository-integration-1.9-SNAPSHOT-tools.tar.gz
[INFO] 
[INFO] --- maven-deploy-plugin:2.8.1:deploy (default-deploy) @ bitrepository-integration ---
[INFO] Downloading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Downloaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/maven-metadata.xml (2 KB at 43.7 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/bitrepository-integration-1.9-20170221.143502-12.jar
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/bitrepository-integration-1.9-20170221.143502-12.jar (33 KB at 899.0 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/bitrepository-integration-1.9-20170221.143502-12.pom
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/bitrepository-integration-1.9-20170221.143502-12.pom (4 KB at 147.2 KB/sec)
[INFO] Downloading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/maven-metadata.xml
[INFO] Downloaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/maven-metadata.xml (450 B at 20.9 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/maven-metadata.xml (2 KB at 52.2 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/maven-metadata.xml (450 B at 17.6 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/bitrepository-integration-1.9-20170221.143502-12-tests.jar
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/bitrepository-integration-1.9-20170221.143502-12-tests.jar (3 KB at 83.1 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/maven-metadata.xml (2 KB at 77.0 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/bitrepository-integration-1.9-20170221.143502-12-sources.jar
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/bitrepository-integration-1.9-20170221.143502-12-sources.jar (31 KB at 1047.2 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/maven-metadata.xml (2 KB at 67.4 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/bitrepository-integration-1.9-20170221.143502-12-quickstart.tar.gz
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/bitrepository-integration-1.9-20170221.143502-12-quickstart.tar.gz (106365 KB at 23264.3 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/maven-metadata.xml (2 KB at 62.2 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/bitrepository-integration-1.9-20170221.143502-12-tools.tar.gz
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/bitrepository-integration-1.9-20170221.143502-12-tools.tar.gz (119622 KB at 24348.0 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/maven-metadata.xml (2 KB at 73.5 KB/sec)
[JENKINS] Archiving disabled
[JENKINS] Archiving disabled
[JENKINS] Archiving disabled
[JENKINS] Archiving disabled
[JENKINS] Archiving disabled
[JENKINS] Archiving disabled
[JENKINS] Archiving disabled
[JENKINS] Archiving disabled
[JENKINS] Archiving disabled
[JENKINS] Archiving disabled
[JENKINS] Archiving disabled
[JENKINS] Archiving disabled
[JENKINS] Archiving disabled
[INFO] ------------------------------------------------------------------------
[INFO] Reactor Summary:
[INFO] 
[INFO] Bitrepository ...................................... SUCCESS [  6.059 s]
[INFO] Bitrepository Reference Settings ................... SUCCESS [ 10.673 s]
[INFO] Bitrepository Core ................................. SUCCESS [ 47.479 s]
[INFO] Bitrepository Client ............................... SUCCESS [01:13 min]
[INFO] Bitrepository Service .............................. SUCCESS [ 20.014 s]
[INFO] Bitrepository Integrity Service .................... SUCCESS [01:59 min]
[INFO] Bitrepository Alarm Service ........................ SUCCESS [ 23.476 s]
[INFO] Bitrepository Audit Trail Service .................. SUCCESS [ 42.139 s]
[INFO] Bitrepository Reference Pillar ..................... SUCCESS [01:14 min]
[INFO] Bitrepository Monitoring Service ................... SUCCESS [ 17.861 s]
[INFO] Bitrepository Webclient ............................ SUCCESS [  5.919 s]
[INFO] Bitrepository Integration .......................... SUCCESS [ 28.914 s]
[INFO] ------------------------------------------------------------------------
[INFO] BUILD SUCCESS
[INFO] ------------------------------------------------------------------------
[INFO] Total time: 07:58 min
[INFO] Finished at: 2017-02-21T15:35:18+01:00
[INFO] Final Memory: 59M/142M
[INFO] ------------------------------------------------------------------------
channel stopped
Started indexing related Jira issue keys
Successfully indexed related Jira issue keys
Warning: you have no plugins providing access control for builds, so falling back to legacy behavior of permitting any downstream builds to be triggered
Triggering a new build of Bitrepository-deploy-ci-test
Finished: SUCCESS