SuccessConsole Output

Skipping 547 KB.. Full Log
ingData
      Test starting: testGetChecksumResult
        Description: Tests the restrictions on the GetChecksumResult call to the database.
        Step: Instantiate database with appropriate data.
        Step: Test with no time restrictions
        Step: Test with time restrictions from epoc to now
        Step: Test with very strict time restrictions around the default date
        Step: Test with too new a lower limit
        Step: Test with exact date as both upper and lower limit
        Step: Test with date limit from 1 millis before as lower and exact date a upper limit
        Step: Test with date limit from exact date as lower and 1 millis after date a upper limit
        Step: Test with too old an upper limit
      Test success: testGetChecksumResult
      Test starting: testGetFileIDsRestrictions
        Description: Tests the restrictions on the GetFileIDs call to the database.
        Step: Instantiate database with appropriate data.
        Step: Test with no time restrictions and 10000 max_results
        Step: Test with minimum-date earlier than first file
        Step: Test with maximum-date earlier than first file
        Step: Test with minimum-date set to later than second file.
        Step: Test with maximum-date set to later than second file.
        Step: Test with minimum-date set to middle date.
        Step: Test with maximum-date set to middle date.
        Step: Test with both minimum-date and maximum-date set to middle date.
        Step: Test the first file-id, with no other restrictions
        Step: Test the second file-id, with no other restrictions
        Step: Test the date for the first file-id, while requesting the second file-id
      Test success: testGetFileIDsRestrictions
      Test starting: testGetFileIDsWithOldChecksums
        Description: Tests the restrictions on the GetFileIDsWithOldChecksums call to the database.
        Step: Instantiate database with appropriate data.
        Step: Extract all entries with checksum date older than now
        Step: Extract all entries with checksum date older than epoch
        Step: Extract all entries with checksum date older than middle date
      Test success: testGetFileIDsWithOldChecksums
      Test starting: testReplacingExistingEntry
        Description: Test that an entry can be replaced by another in the database.
        Step: Check whether the default entry exists.
        Step: Replace the checksum and date
      Test success: testReplacingExistingEntry
      Test starting: testSpecifiedEntryExtraction
        Description: Test that specific entries can be extracted. Has two entries in the database: one for the current timestamp and one for the epoch.
        Step: Instantiate database with appropriate data.
        Step: Extract with out restrictions
        Step: Extract with a maximum of 1 entry
        Step: Extract all dates older than this tests instantiation
        Step: Extract all dates newer than this tests instantiation
        Step: Extract all dates older than the newest instance
        Step: Extract all dates newer than the oldest instantiation
      Test success: testSpecifiedEntryExtraction
    Starting testcase ChecksumPillarModelTest
      Test starting: testPillarModelBasicFunctionality
        Description: Test the basic functions of the full reference pillar model.
        Step: Check the pillar id in the pillar model
        Step: Ask whether it can handle a file of size 0
        Step: Ask whether it can handle a file of maximum size
        Step: Check the ChecksumPillarSpec
        Step: Checkum whether the checksum pillar should download
      Test success: testPillarModelBasicFunctionality
      Test starting: testPillarModelHasFile
        Description: Test that the file exists, when placed in the archive and cache
        Step: Setup
        Step: Check whether file exists and retrieve it.
        Step: Check whether file exists.
        Step: Ask for the checksum data for the file with different checksum specs
        Step: Ask for the checksum entry for the file with different checksum specs
        Step: Ask for the checksum for the file with different checksum specs
        Step: Check extraction of checksum result set
        Step: Check retrieval of non-default checksum
        Step: Check retrieval of non-default checksum result set
        Step: Test retrieval of single checksum result set
      Test success: testPillarModelHasFile
      Test starting: testPillarModelNoFile
        Description: Test that the file exists, when placed in the archive and cache
        Step: Setup
        Step: Check whether file exists and try to retrieve it.
        Step: Verify that anexceptions are thrown when verifying file existance.
      Test success: testPillarModelNoFile
    Starting testcase GeneralMessageHandlingTest
        Added fixture: Initialize a new Pillar.
      Test starting: testPillarMessageHandler
        Description: Test the handling of the PillarMessageHandler super-class.
        Step: Setup
        Step: Test the pillar ID
      Test success: testPillarMessageHandler
    Starting testcase GetAuditTrailsTest
        Added fixture: Initialize a new Pillar.
      Test starting: checksumPillarGetAuditTrailsMaximumNumberOfResults
        Description: Tests the GetAuditTrails functionality of the pillar for the successful scenario, where a limited number of audit trails are requested.
        Step: Set up constants and variables.
        Step: Send the request for the limited amount of audit trails to the pillar.
          Result: Received message on TEST-TOPIC-checksumPillarGetAuditTrailsMaximumNumberOfResults-cibuild01 : org.bitrepository.bitrepositorymessages.GetAuditTrailsProgressResponse@1a8bbf04[correlationID=40ef2cad-5c55-4917-a1a7-f5d214f3c869, collectionID=TwoPillarCollection, destination=TEST-TOPIC-checksumPillarGetAuditTrailsMaximumNumberOfResults-cibuild01, replyTo=TEST-TOPIC-Pillar-checksumPillarGetAuditTrailsMaximumNumberOfResults-cibuild01-contributor, from=Pillar-checksumPillarGetAuditTrailsMaximumNumberOfResults, to=Pillar-checksumPillarGetAuditTrailsMaximumNumberOfResults, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@52777e0b[responseCode=OPERATION_ACCEPTED_PROGRESS, responseText=Starting to extract the requested audit trails.], contributor=Pillar-checksumPillarGetAuditTrailsMaximumNumberOfResults, resultAddress=<null>(default)]
          Result: Received message on TEST-TOPIC-checksumPillarGetAuditTrailsMaximumNumberOfResults-cibuild01 : org.bitrepository.bitrepositorymessages.GetAuditTrailsFinalResponse@53a1baf5[correlationID=40ef2cad-5c55-4917-a1a7-f5d214f3c869, collectionID=TwoPillarCollection, destination=TEST-TOPIC-checksumPillarGetAuditTrailsMaximumNumberOfResults-cibuild01, replyTo=TEST-TOPIC-Pillar-checksumPillarGetAuditTrailsMaximumNumberOfResults-cibuild01-contributor, from=Pillar-checksumPillarGetAuditTrailsMaximumNumberOfResults, to=Pillar-checksumPillarGetAuditTrailsMaximumNumberOfResults, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@30f6791d[responseCode=OPERATION_COMPLETED, responseText=<null>(default)], contributor=Pillar-checksumPillarGetAuditTrailsMaximumNumberOfResults, resultingAuditTrails=org.bitrepository.bitrepositoryelements.ResultingAuditTrails@699a53d4[resultAddress=<null>(default), auditTrailEvents=org.bitrepository.bitrepositoryelements.AuditTrailEvents@1adcd53b[auditTrailEvent={org.bitrepository.bitrepositoryelements.AuditTrailEvent@4474a287[sequenceNumber=1, fileID=fileID1487601707031, reportingComponent=MOCK-AUDIT-MANAGER, actorOnFile=ACTOR, actionOnFile=CHECKSUM_CALCULATED, actionDateTime=2017-02-20T15:41:47.034+01:00, info=InFo, operationID=operationID, certificateID=certificateid, auditTrailInformation=auditTrails],org.bitrepository.bitrepositoryelements.AuditTrailEvent@47c90585[sequenceNumber=2, fileID=fileID1487601707031, reportingComponent=MOCK-AUDIT-MANAGER, actorOnFile=ACTOR, actionOnFile=DELETE_FILE, actionDateTime=2017-02-20T15:41:47.034+01:00, info=InFo, operationID=operationID, certificateID=certificateid, auditTrailInformation=auditTrails],org.bitrepository.bitrepositoryelements.AuditTrailEvent@7cf6ea5b[sequenceNumber=3, fileID=fileID1487601707031, reportingComponent=MOCK-AUDIT-MANAGER, actorOnFile=ACTOR, actionOnFile=FAILURE, actionDateTime=2017-02-20T15:41:47.034+01:00, info=InFo, operationID=operationID, certificateID=certificateid, auditTrailInformation=auditTrails],org.bitrepository.bitrepositoryelements.AuditTrailEvent@ff8df3[sequenceNumber=4, fileID=fileID1487601707031, reportingComponent=MOCK-AUDIT-MANAGER, actorOnFile=ACTOR, actionOnFile=FILE_MOVED, actionDateTime=2017-02-20T15:41:47.035+01:00, info=InFo, operationID=operationID, certificateID=certificateid, auditTrailInformation=auditTrails],org.bitrepository.bitrepositoryelements.AuditTrailEvent@617e67f1[sequenceNumber=5, fileID=fileID1487601707031, reportingComponent=MOCK-AUDIT-MANAGER, actorOnFile=ACTOR, actionOnFile=GET_CHECKSUMS, actionDateTime=2017-02-20T15:41:47.035+01:00, info=InFo, operationID=operationID, certificateID=certificateid, auditTrailInformation=auditTrails]}]], partialResult=true]
        Step: Validate the final response
      Test success: checksumPillarGetAuditTrailsMaximumNumberOfResults
        Added fixture: Initialize a new Pillar.
      Test starting: checksumPillarGetAuditTrailsSpecificRequests
        Description: Tests the GetAuditTrails functionality of the pillar for the successful scenario, where a specific audit trail are requested.
        Step: Set up constants and variables.
        Step: Send the identification request
          Result: Received message on TEST-TOPIC-checksumPillarGetAuditTrailsSpecificRequests-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyContributorsForGetAuditTrailsResponse@3aba9252[correlationID=e3ff4af3-d871-418c-87eb-b989ac724572, collectionID=TwoPillarCollection, destination=TEST-TOPIC-checksumPillarGetAuditTrailsSpecificRequests-cibuild01, replyTo=TEST-TOPIC-Pillar-checksumPillarGetAuditTrailsSpecificRequests-cibuild01-contributor, from=Pillar-checksumPillarGetAuditTrailsSpecificRequests, to=Pillar-checksumPillarGetAuditTrailsSpecificRequests, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@10b51115[responseCode=IDENTIFICATION_POSITIVE, responseText=<null>(default)]]
        Step: Retrieve and validate the response.
        Step: Make and send the request for the actual GetAuditTrails operation
          Result: Received message on TEST-TOPIC-checksumPillarGetAuditTrailsSpecificRequests-cibuild01 : org.bitrepository.bitrepositorymessages.GetAuditTrailsProgressResponse@5c04d23e[correlationID=e3ff4af3-d871-418c-87eb-b989ac724572, collectionID=TwoPillarCollection, destination=TEST-TOPIC-checksumPillarGetAuditTrailsSpecificRequests-cibuild01, replyTo=TEST-TOPIC-Pillar-checksumPillarGetAuditTrailsSpecificRequests-cibuild01-contributor, from=Pillar-checksumPillarGetAuditTrailsSpecificRequests, to=Pillar-checksumPillarGetAuditTrailsSpecificRequests, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@32c2f3ee[responseCode=OPERATION_ACCEPTED_PROGRESS, responseText=Starting to extract the requested audit trails.], contributor=Pillar-checksumPillarGetAuditTrailsSpecificRequests, resultAddress=<null>(default)]
          Result: Received message on TEST-TOPIC-checksumPillarGetAuditTrailsSpecificRequests-cibuild01 : org.bitrepository.bitrepositorymessages.GetAuditTrailsFinalResponse@a47611a[correlationID=e3ff4af3-d871-418c-87eb-b989ac724572, collectionID=TwoPillarCollection, destination=TEST-TOPIC-checksumPillarGetAuditTrailsSpecificRequests-cibuild01, replyTo=TEST-TOPIC-Pillar-checksumPillarGetAuditTrailsSpecificRequests-cibuild01-contributor, from=Pillar-checksumPillarGetAuditTrailsSpecificRequests, to=Pillar-checksumPillarGetAuditTrailsSpecificRequests, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@6faeb7dc[responseCode=OPERATION_COMPLETED, responseText=<null>(default)], contributor=Pillar-checksumPillarGetAuditTrailsSpecificRequests, resultingAuditTrails=org.bitrepository.bitrepositoryelements.ResultingAuditTrails@15411d35[resultAddress=<null>(default), auditTrailEvents=org.bitrepository.bitrepositoryelements.AuditTrailEvents@30b9d1f0[auditTrailEvent={org.bitrepository.bitrepositoryelements.AuditTrailEvent@1c7294c[sequenceNumber=1, fileID=fileID1487601707560, reportingComponent=MOCK-AUDIT-MANAGER, actorOnFile=ACTOR, actionOnFile=OTHER, actionDateTime=2017-02-20T15:41:47.560+01:00, info=InFo, operationID=operationID, certificateID=certificateid, auditTrailInformation=auditTrails]}]], partialResult=false]
        Step: Receive and validate the progress response.
        Step: Receive and validate the final response
        Step: Make another request, where both ingested audit trails is requested
          Result: Received message on TEST-TOPIC-checksumPillarGetAuditTrailsSpecificRequests-cibuild01 : org.bitrepository.bitrepositorymessages.GetAuditTrailsProgressResponse@1b4d6eff[correlationID=e3ff4af3-d871-418c-87eb-b989ac724572, collectionID=TwoPillarCollection, destination=TEST-TOPIC-checksumPillarGetAuditTrailsSpecificRequests-cibuild01, replyTo=TEST-TOPIC-Pillar-checksumPillarGetAuditTrailsSpecificRequests-cibuild01-contributor, from=Pillar-checksumPillarGetAuditTrailsSpecificRequests, to=Pillar-checksumPillarGetAuditTrailsSpecificRequests, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@6786016[responseCode=OPERATION_ACCEPTED_PROGRESS, responseText=Starting to extract the requested audit trails.], contributor=Pillar-checksumPillarGetAuditTrailsSpecificRequests, resultAddress=<null>(default)]
          Result: Received message on TEST-TOPIC-checksumPillarGetAuditTrailsSpecificRequests-cibuild01 : org.bitrepository.bitrepositorymessages.GetAuditTrailsFinalResponse@78b00778[correlationID=e3ff4af3-d871-418c-87eb-b989ac724572, collectionID=TwoPillarCollection, destination=TEST-TOPIC-checksumPillarGetAuditTrailsSpecificRequests-cibuild01, replyTo=TEST-TOPIC-Pillar-checksumPillarGetAuditTrailsSpecificRequests-cibuild01-contributor, from=Pillar-checksumPillarGetAuditTrailsSpecificRequests, to=Pillar-checksumPillarGetAuditTrailsSpecificRequests, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@4005dc6b[responseCode=OPERATION_COMPLETED, responseText=<null>(default)], contributor=Pillar-checksumPillarGetAuditTrailsSpecificRequests, resultingAuditTrails=org.bitrepository.bitrepositoryelements.ResultingAuditTrails@30cf6802[resultAddress=<null>(default), auditTrailEvents=org.bitrepository.bitrepositoryelements.AuditTrailEvents@7572c6dd[auditTrailEvent={org.bitrepository.bitrepositoryelements.AuditTrailEvent@1c7294c[sequenceNumber=1, fileID=fileID1487601707560, reportingComponent=MOCK-AUDIT-MANAGER, actorOnFile=ACTOR, actionOnFile=OTHER, actionDateTime=2017-02-20T15:41:47.560+01:00, info=InFo, operationID=operationID, certificateID=certificateid, auditTrailInformation=auditTrails],org.bitrepository.bitrepositoryelements.AuditTrailEvent@d8194cc[sequenceNumber=2, fileID=notThisFile, reportingComponent=MOCK-AUDIT-MANAGER, actorOnFile=UnknownActor, actionOnFile=FAILURE, actionDateTime=2017-02-20T15:41:47.561+01:00, info=badInfo, operationID=operationID, certificateID=certificateid, auditTrailInformation=WrongAuditTrail]}]], partialResult=false]
        Step: Receive and validate the progress response.
        Step: Receive and validate the final response
      Test success: checksumPillarGetAuditTrailsSpecificRequests
        Added fixture: Initialize a new Pillar.
      Test starting: checksumPillarGetAuditTrailsSuccessful
        Description: Tests the GetAuditTrails functionality of the pillar for the successful scenario, where all audit trails are requested.
        Step: Set up constants and variables.
        Step: Send the identification request
          Result: Received message on TEST-TOPIC-checksumPillarGetAuditTrailsSuccessful-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyContributorsForGetAuditTrailsResponse@42ac84a9[correlationID=675acf60-8a6d-4a0c-a3da-3809ba841e95, collectionID=TwoPillarCollection, destination=TEST-TOPIC-checksumPillarGetAuditTrailsSuccessful-cibuild01, replyTo=TEST-TOPIC-Pillar-checksumPillarGetAuditTrailsSuccessful-cibuild01-contributor, from=Pillar-checksumPillarGetAuditTrailsSuccessful, to=Pillar-checksumPillarGetAuditTrailsSuccessful, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@794efdf[responseCode=IDENTIFICATION_POSITIVE, responseText=<null>(default)]]
        Step: Make and send the request for the actual GetAuditTrails operation
          Result: Received message on TEST-TOPIC-checksumPillarGetAuditTrailsSuccessful-cibuild01 : org.bitrepository.bitrepositorymessages.GetAuditTrailsProgressResponse@1cdece3d[correlationID=675acf60-8a6d-4a0c-a3da-3809ba841e95, collectionID=TwoPillarCollection, destination=TEST-TOPIC-checksumPillarGetAuditTrailsSuccessful-cibuild01, replyTo=TEST-TOPIC-Pillar-checksumPillarGetAuditTrailsSuccessful-cibuild01-contributor, from=Pillar-checksumPillarGetAuditTrailsSuccessful, to=Pillar-checksumPillarGetAuditTrailsSuccessful, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@263b0a8d[responseCode=OPERATION_ACCEPTED_PROGRESS, responseText=Starting to extract the requested audit trails.], contributor=Pillar-checksumPillarGetAuditTrailsSuccessful, resultAddress=<null>(default)]
          Result: Received message on TEST-TOPIC-checksumPillarGetAuditTrailsSuccessful-cibuild01 : org.bitrepository.bitrepositorymessages.GetAuditTrailsFinalResponse@945b2f[correlationID=675acf60-8a6d-4a0c-a3da-3809ba841e95, collectionID=TwoPillarCollection, destination=TEST-TOPIC-checksumPillarGetAuditTrailsSuccessful-cibuild01, replyTo=TEST-TOPIC-Pillar-checksumPillarGetAuditTrailsSuccessful-cibuild01-contributor, from=Pillar-checksumPillarGetAuditTrailsSuccessful, to=Pillar-checksumPillarGetAuditTrailsSuccessful, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@20deb6f5[responseCode=OPERATION_COMPLETED, responseText=<null>(default)], contributor=Pillar-checksumPillarGetAuditTrailsSuccessful, resultingAuditTrails=org.bitrepository.bitrepositoryelements.ResultingAuditTrails@4a9b3bf5[resultAddress=<null>(default), auditTrailEvents=org.bitrepository.bitrepositoryelements.AuditTrailEvents@348a2f49[auditTrailEvent={org.bitrepository.bitrepositoryelements.AuditTrailEvent@16e557d4[sequenceNumber=1, fileID=fileid, reportingComponent=MOCK-AUDIT-MANAGER, actorOnFile=actor, actionOnFile=OTHER, actionDateTime=2017-02-20T15:41:47.845+01:00, info=info, operationID=operationID, certificateID=certificateID, auditTrailInformation=auditTrail]}]], partialResult=false]
        Step: Receive and validate the progress response.
        Step: Receive and validate the final response
      Test success: checksumPillarGetAuditTrailsSuccessful
    Starting testcase GetFileTest
        Added fixture: Initialize a new Pillar.
      Test starting: badCaseIdentification
        Description: Tests the identification for a GetFile operation on the checksum pillar for the failure scenario, when the file is missing.
        Step: Set up constants and variables.
        Step: Setup for throwing an exception when asked to verify file existence
        Step: Create and send the identify request message.
          Result: Received message on TEST-TOPIC-badCaseIdentification-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForGetFileResponse@713ffca3[correlationID=c3a0a776-49eb-44c3-bb39-1f5ea72c0b9e, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseIdentification-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseIdentification-cibuild01-contributor, from=Pillar-badCaseIdentification, to=badCaseIdentification, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@6614a420[responseCode=FILE_NOT_FOUND_FAILURE, responseText=File not found.], fileID=DefaultFilebadCaseIdentification, pillarID=Pillar-badCaseIdentification, timeToDeliver=<null>(default)]
        Step: Retrieve and validate the response getPillarID() the pillar.
      Test success: badCaseIdentification
        Added fixture: Initialize a new Pillar.
      Test starting: goodCaseIdentification
        Description: Tests the identification for a GetFile operation on the pillar for the successful scenario.
        Step: Set up constants and variables.
        Step: Setup for having the file and delivering pillar id
        Step: Create and send the identify request message.
          Result: Received message on TEST-TOPIC-goodCaseIdentification-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForGetFileResponse@2232c745[correlationID=dff82522-f6b8-4086-b472-1a0849d44ca5, collectionID=TwoPillarCollection, destination=TEST-TOPIC-goodCaseIdentification-cibuild01, replyTo=TEST-TOPIC-Pillar-goodCaseIdentification-cibuild01-contributor, from=Pillar-goodCaseIdentification, to=goodCaseIdentification, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@40009de0[responseCode=IDENTIFICATION_POSITIVE, responseText=Operation acknowledged and accepted.], fileID=DefaultFilegoodCaseIdentification, pillarID=Pillar-goodCaseIdentification, timeToDeliver=org.bitrepository.bitrepositoryelements.TimeMeasureTYPE@270d54ea[timeMeasureUnit=MILLISECONDS, timeMeasureValue=1000]]
        Step: Retrieve and validate the response getPillarID() the pillar.
      Test success: goodCaseIdentification
    Starting testcase PutFileTest
        Added fixture: Initialize a new Pillar.
      Test starting: badCaseIdentification
        Description: Tests the identification for a PutFile operation on the pillar for the failure scenario, when the file already exists.
        Step: Set up constants and variables.
        Step: Setup for already having the file and delivering pillar id
        Step: Create and send the identify request message.
          Result: Received message on TEST-TOPIC-badCaseIdentification-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForPutFileResponse@32f4d719[correlationID=2a43957c-dfe8-4f2a-935b-fd91dbe10bc1, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseIdentification-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseIdentification-cibuild01-contributor, from=Pillar-badCaseIdentification, to=badCaseIdentification, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@5ef92103[responseCode=DUPLICATE_FILE_FAILURE, responseText=<null>(default)], pillarID=Pillar-badCaseIdentification, fileID=DefaultFilebadCaseIdentification, pillarChecksumSpec=<null>(default), checksumDataForExistingFile=<null>(default), timeToDeliver=org.bitrepository.bitrepositoryelements.TimeMeasureTYPE@16e98804[timeMeasureUnit=MILLISECONDS, timeMeasureValue=1000]]
        Step: Retrieve and validate the response getPillarID() the pillar.
      Test success: badCaseIdentification
        Added fixture: Initialize a new Pillar.
      Test starting: badCaseOperationFileAlreadyExists
        Description: Tests the PutFile operation on the pillar for the failure scenario, when the file already exists.
        Step: Set up constants and variables.
        Step: Setup for already having the file and delivering pillar id
        Step: Create and send the identify request message.
          Result: Received message on TEST-TOPIC-badCaseOperationFileAlreadyExists-cibuild01 : org.bitrepository.bitrepositorymessages.PutFileFinalResponse@19fd0299[correlationID=3d2440b6-b316-4d74-ae81-aaa064f7c612, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseOperationFileAlreadyExists-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationFileAlreadyExists-cibuild01-contributor, from=Pillar-badCaseOperationFileAlreadyExists, to=badCaseOperationFileAlreadyExists, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@3ee31090[responseCode=DUPLICATE_FILE_FAILURE, responseText=We already have the file], pillarID=Pillar-badCaseOperationFileAlreadyExists, pillarChecksumSpec=<null>(default), fileID=DefaultFilebadCaseOperationFileAlreadyExists, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, checksumDataForNewFile=<null>(default), checksumDataForExistingFile=<null>(default)]
        Step: Retrieve the FinalResponse for the PutFile request
      Test success: badCaseOperationFileAlreadyExists
        Added fixture: Initialize a new Pillar.
      Test starting: badCasePutOperationNoValidationChecksum
        Description: Tests the PutFile operation on the pillar for the failure scenario, when no validation checksum is given but required.
        Step: Set up constants and variables.
        Step: Setup for not already having the file and delivering pillar id
        Step: Create and send the identify request message.
          Result: Received message on TEST-TOPIC-badCasePutOperationNoValidationChecksum-cibuild01 : org.bitrepository.bitrepositorymessages.PutFileFinalResponse@7cdc0d76[correlationID=e3857829-af1d-48d1-827c-215f7df860c5, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCasePutOperationNoValidationChecksum-cibuild01, replyTo=TEST-TOPIC-Pillar-badCasePutOperationNoValidationChecksum-cibuild01-contributor, from=Pillar-badCasePutOperationNoValidationChecksum, to=badCasePutOperationNoValidationChecksum, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@344c2157[responseCode=NEW_FILE_CHECKSUM_FAILURE, responseText=A checksum is required for the PutFile operation to be performed.], pillarID=Pillar-badCasePutOperationNoValidationChecksum, pillarChecksumSpec=<null>(default), fileID=DefaultFilebadCasePutOperationNoValidationChecksum, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, checksumDataForNewFile=<null>(default), checksumDataForExistingFile=<null>(default)]
15:41:53.380 WARN  o.b.p.common.PillarAlarmDispatcher - Sending alarm: org.bitrepository.bitrepositoryelements.Alarm@3349d202[origDateTime=2017-02-20T15:41:53.380+01:00, alarmCode=CHECKSUM_ALARM, alarmRaiser=Pillar-badCasePutOperationNoValidationChecksum, alarmText=A checksum is required for the PutFile operation to be performed., fileID=DefaultFilebadCasePutOperationNoValidationChecksum, collectionID=TwoPillarCollection]
          Result: Received message on TEST-ALARM-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.AlarmMessage@670ef436[correlationID=fd46e0ab-b8f9-4b32-b8b4-cc1bbaa65bf1, collectionID=TwoPillarCollection, destination=TEST-ALARM-TOPIC-cibuild01, replyTo=TEST-TOPIC-Pillar-badCasePutOperationNoValidationChecksum-cibuild01-contributor, from=Pillar-badCasePutOperationNoValidationChecksum, to=<null>(default), version=30, minVersion=24, alarm=org.bitrepository.bitrepositoryelements.Alarm@3349d202[origDateTime=2017-02-20T15:41:53.380+01:00, alarmCode=CHECKSUM_ALARM, alarmRaiser=Pillar-badCasePutOperationNoValidationChecksum, alarmText=A checksum is required for the PutFile operation to be performed., fileID=DefaultFilebadCasePutOperationNoValidationChecksum, collectionID=TwoPillarCollection]]
        Step: Retrieve the FinalResponse for the PutFile request
        Step: Pillar should have sent an alarm
      Test success: badCasePutOperationNoValidationChecksum
        Added fixture: Initialize a new Pillar.
      Test starting: goodCaseIdentification
        Description: Tests the identification for a PutFile operation on the pillar for the successful scenario.
        Step: Set up constants and variables.
        Step: Setup for not already having the file and delivering pillar id
        Step: Create and send the identify request message.
          Result: Received message on TEST-TOPIC-goodCaseIdentification-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForPutFileResponse@2423aa4a[correlationID=92b77207-96c5-4b24-a3d1-b1f4603f69a7, collectionID=TwoPillarCollection, destination=TEST-TOPIC-goodCaseIdentification-cibuild01, replyTo=TEST-TOPIC-Pillar-goodCaseIdentification-cibuild01-contributor, from=Pillar-goodCaseIdentification, to=goodCaseIdentification, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@288c6f9[responseCode=IDENTIFICATION_POSITIVE, responseText=Operation acknowledged and accepted.], pillarID=Pillar-goodCaseIdentification, fileID=DefaultFilegoodCaseIdentification, pillarChecksumSpec=<null>(default), checksumDataForExistingFile=<null>(default), timeToDeliver=org.bitrepository.bitrepositoryelements.TimeMeasureTYPE@20a670f1[timeMeasureUnit=MILLISECONDS, timeMeasureValue=1000]]
        Step: Retrieve and validate the response getPillarID() the pillar.
      Test success: goodCaseIdentification
        Added fixture: Initialize a new Pillar.
      Test starting: goodCaseOperationWithChecksumReturn
        Description: Tests the PutFile operation on the pillar for the success scenario, when requesting the cheksum of the file returned.
        Step: Set up constants and variables.
        Step: Setup for not already having the file and delivering pillar id, and delivering an answer for the checksum request
        Step: Create and send the identify request message.
          Result: Received message on TEST-TOPIC-goodCaseOperationWithChecksumReturn-cibuild01 : org.bitrepository.bitrepositorymessages.PutFileProgressResponse@3f7baa9f[correlationID=7ffc3c73-c04e-4060-9869-5afa2ce72fbe, collectionID=TwoPillarCollection, destination=TEST-TOPIC-goodCaseOperationWithChecksumReturn-cibuild01, replyTo=TEST-TOPIC-Pillar-goodCaseOperationWithChecksumReturn-cibuild01-contributor, from=Pillar-goodCaseOperationWithChecksumReturn, to=goodCaseOperationWithChecksumReturn, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@60b1df88[responseCode=OPERATION_ACCEPTED_PROGRESS, responseText=Started to receive data.], pillarID=Pillar-goodCaseOperationWithChecksumReturn, pillarChecksumSpec=<null>(default), fileID=DefaultFilegoodCaseOperationWithChecksumReturn, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt]
          Result: Received message on TEST-TOPIC-goodCaseOperationWithChecksumReturn-cibuild01 : org.bitrepository.bitrepositorymessages.PutFileFinalResponse@2ed03b1a[correlationID=7ffc3c73-c04e-4060-9869-5afa2ce72fbe, collectionID=TwoPillarCollection, destination=TEST-TOPIC-goodCaseOperationWithChecksumReturn-cibuild01, replyTo=TEST-TOPIC-Pillar-goodCaseOperationWithChecksumReturn-cibuild01-contributor, from=Pillar-goodCaseOperationWithChecksumReturn, to=goodCaseOperationWithChecksumReturn, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@4c1d530d[responseCode=OPERATION_COMPLETED, responseText=<null>(default)], pillarID=Pillar-goodCaseOperationWithChecksumReturn, pillarChecksumSpec=<null>(default), fileID=DefaultFilegoodCaseOperationWithChecksumReturn, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, checksumDataForNewFile=org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@22be8899[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@3abb64ea[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], checksumValue={18,52,-52,-52,-52,-52,67,33}, calculationTimestamp=2017-02-20T15:41:54.966+01:00], checksumDataForExistingFile=<null>(default)]
        Step: Retrieve the ProgressResponse for the GetFileIDs request
        Step: Retrieve the FinalResponse for the PutFile request
      Test success: goodCaseOperationWithChecksumReturn
    Starting testcase ReplaceFileTest
        Added fixture: Initialize a new Pillar.
      Test starting: badCaseIdentification
        Description: Tests the identification for a ReplaceFile operation on the pillar for the failure scenario, when the file does not exist.
        Step: Set up constants and variables.
        Step: Setup for not having the file and delivering pillar id
        Step: Create and send the identify request message.
          Result: Received message on TEST-TOPIC-badCaseIdentification-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForReplaceFileResponse@7856f5e7[correlationID=ceda99bb-9f40-4aaa-a2fb-181b09f8df4c, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseIdentification-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseIdentification-cibuild01-contributor, from=Pillar-badCaseIdentification, to=badCaseIdentification, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@5cab0cdd[responseCode=FILE_NOT_FOUND_FAILURE, responseText=Could not find the requested file to delete.], fileID=DefaultFile, pillarID=Pillar-badCaseIdentification, pillarChecksumSpec=<null>(default), timeToDeliver=<null>(default)]
        Step: Retrieve and validate the response getPillarID() the pillar.
      Test success: badCaseIdentification
        Added fixture: Initialize a new Pillar.
      Test starting: badCaseOperationMissingFile
        Description: Tests the ReplaceFile operation on the pillar for the failure scenario, when the file is missing.
        Step: Set up constants and variables.
        Step: Setup for not having the file and delivering pillar id
        Step: Create and send the identify request message.
          Result: Received message on TEST-TOPIC-badCaseOperationMissingFile-cibuild01 : org.bitrepository.bitrepositorymessages.ReplaceFileFinalResponse@635d1461[correlationID=0009cf0a-62b0-4da2-b568-3c014b55b1b7, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseOperationMissingFile-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationMissingFile-cibuild01-contributor, from=Pillar-badCaseOperationMissingFile, to=badCaseOperationMissingFile, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@2bbdba03[responseCode=FILE_NOT_FOUND_FAILURE, responseText=The file 'DefaultFile' has been requested, but we do not have that file!], pillarID=Pillar-badCaseOperationMissingFile, pillarChecksumSpec=<null>(default), fileID=DefaultFile, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, checksumDataForExistingFile=<null>(default), checksumDataForNewFile=<null>(default)]
        Step: Retrieve the FinalResponse for the ReplaceFile request
      Test success: badCaseOperationMissingFile
        Added fixture: Initialize a new Pillar.
      Test starting: badCaseOperationNoDestructiveChecksum
        Description: Tests the ReplaceFile operation on the pillar for the failure scenario, when no validation checksum is given for the destructive action, but though is required.
        Step: Set up constants and variables.
        Step: Setup for having the file and delivering pillar id
        Step: Create and send the identify request message.
          Result: Received message on TEST-TOPIC-badCaseOperationNoDestructiveChecksum-cibuild01 : org.bitrepository.bitrepositorymessages.ReplaceFileFinalResponse@70a8159f[correlationID=c6f8e24a-1e61-4113-b9ad-47aa460a53d2, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseOperationNoDestructiveChecksum-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationNoDestructiveChecksum-cibuild01-contributor, from=Pillar-badCaseOperationNoDestructiveChecksum, to=badCaseOperationNoDestructiveChecksum, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@62e3dba0[responseCode=EXISTING_FILE_CHECKSUM_FAILURE, responseText=According to the contract a checksum for file to be deleted during the replacing operation is required.], pillarID=Pillar-badCaseOperationNoDestructiveChecksum, pillarChecksumSpec=<null>(default), fileID=DefaultFile, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, checksumDataForExistingFile=<null>(default), checksumDataForNewFile=<null>(default)]
15:41:58.896 WARN  o.b.p.common.PillarAlarmDispatcher - Sending alarm: org.bitrepository.bitrepositoryelements.Alarm@2c0e38c2[origDateTime=2017-02-20T15:41:58.895+01:00, alarmCode=CHECKSUM_ALARM, alarmRaiser=Pillar-badCaseOperationNoDestructiveChecksum, alarmText=According to the contract a checksum for file to be deleted during the replacing operation is required., fileID=DefaultFile, collectionID=TwoPillarCollection]
          Result: Received message on TEST-ALARM-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.AlarmMessage@615a30bd[correlationID=f0d1cca7-f4ff-418b-b82f-88fc2dc60ae7, collectionID=TwoPillarCollection, destination=TEST-ALARM-TOPIC-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationNoDestructiveChecksum-cibuild01-contributor, from=Pillar-badCaseOperationNoDestructiveChecksum, to=<null>(default), version=30, minVersion=24, alarm=org.bitrepository.bitrepositoryelements.Alarm@2c0e38c2[origDateTime=2017-02-20T15:41:58.895+01:00, alarmCode=CHECKSUM_ALARM, alarmRaiser=Pillar-badCaseOperationNoDestructiveChecksum, alarmText=According to the contract a checksum for file to be deleted during the replacing operation is required., fileID=DefaultFile, collectionID=TwoPillarCollection]]
        Step: Retrieve the FinalResponse for the ReplaceFile request
        Step: Pillar should have sent an alarm
      Test success: badCaseOperationNoDestructiveChecksum
        Added fixture: Initialize a new Pillar.
      Test starting: badCaseOperationNoValidationChecksum
        Description: Tests the ReplaceFile operation on the pillar for the failure scenario, when no validation checksum is given for the new file, but though is required.
        Step: Set up constants and variables.
        Step: Setup for having the file and delivering pillar id
        Step: Create and send the identify request message.
          Result: Received message on TEST-TOPIC-badCaseOperationNoValidationChecksum-cibuild01 : org.bitrepository.bitrepositorymessages.ReplaceFileFinalResponse@3093c41f[correlationID=37cb1eda-4d4b-4e2e-bb1a-abd68be1e7e9, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseOperationNoValidationChecksum-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationNoValidationChecksum-cibuild01-contributor, from=Pillar-badCaseOperationNoValidationChecksum, to=badCaseOperationNoValidationChecksum, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@24ba8adb[responseCode=NEW_FILE_CHECKSUM_FAILURE, responseText=According to the contract a checksum for new file in the replacing operation is required.], pillarID=Pillar-badCaseOperationNoValidationChecksum, pillarChecksumSpec=<null>(default), fileID=DefaultFile, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, checksumDataForExistingFile=<null>(default), checksumDataForNewFile=<null>(default)]
15:41:59.123 WARN  o.b.p.common.PillarAlarmDispatcher - Sending alarm: org.bitrepository.bitrepositoryelements.Alarm@4d20ce7e[origDateTime=2017-02-20T15:41:59.122+01:00, alarmCode=CHECKSUM_ALARM, alarmRaiser=Pillar-badCaseOperationNoValidationChecksum, alarmText=According to the contract a checksum for new file in the replacing operation is required., fileID=DefaultFile, collectionID=TwoPillarCollection]
          Result: Received message on TEST-ALARM-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.AlarmMessage@72621df0[correlationID=6d5fe2cc-6ffe-4260-bd8e-9fdb38107b43, collectionID=TwoPillarCollection, destination=TEST-ALARM-TOPIC-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationNoValidationChecksum-cibuild01-contributor, from=Pillar-badCaseOperationNoValidationChecksum, to=<null>(default), version=30, minVersion=24, alarm=org.bitrepository.bitrepositoryelements.Alarm@4d20ce7e[origDateTime=2017-02-20T15:41:59.122+01:00, alarmCode=CHECKSUM_ALARM, alarmRaiser=Pillar-badCaseOperationNoValidationChecksum, alarmText=According to the contract a checksum for new file in the replacing operation is required., fileID=DefaultFile, collectionID=TwoPillarCollection]]
        Step: Retrieve the FinalResponse for the ReplaceFile request
        Step: Pillar should have sent an alarm
      Test success: badCaseOperationNoValidationChecksum
        Added fixture: Initialize a new Pillar.
      Test starting: badCaseOperationWrongDestructiveChecksum
        Description: Tests the ReplaceFile operation on the pillar for the failure scenario, when the checksum for the destructive action is different from the one in the cache.
        Step: Set up constants and variables.
        Step: Setup for having the file and delivering pillar id
        Step: Create and send the identify request message.
15:41:59.330 WARN  o.b.p.m.ReplaceFileRequestHandler - Failed to handle replace operation on file 'DefaultFile' since the request had the checksum '1234cccccccc4321' where our local file has the value '1234cccccccc4322'. Sending alarm and respond failure.
          Result: Received message on TEST-TOPIC-badCaseOperationWrongDestructiveChecksum-cibuild01 : org.bitrepository.bitrepositorymessages.ReplaceFileFinalResponse@6ca78a2d[correlationID=30944f32-4d9c-4e38-8225-9291a5461f5a, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseOperationWrongDestructiveChecksum-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationWrongDestructiveChecksum-cibuild01-contributor, from=Pillar-badCaseOperationWrongDestructiveChecksum, to=badCaseOperationWrongDestructiveChecksum, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@5d5e5033[responseCode=EXISTING_FILE_CHECKSUM_FAILURE, responseText=Requested to replace the file 'DefaultFile' with checksum '1234cccccccc4321', but our file had a different checksum.], pillarID=Pillar-badCaseOperationWrongDestructiveChecksum, pillarChecksumSpec=<null>(default), fileID=DefaultFile, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, checksumDataForExistingFile=<null>(default), checksumDataForNewFile=<null>(default)]
15:41:59.336 WARN  o.b.p.common.PillarAlarmDispatcher - Sending alarm: org.bitrepository.bitrepositoryelements.Alarm@d4de13b[origDateTime=2017-02-20T15:41:59.332+01:00, alarmCode=CHECKSUM_ALARM, alarmRaiser=Pillar-badCaseOperationWrongDestructiveChecksum, alarmText=Requested to replace the file 'DefaultFile' with checksum '1234cccccccc4321', but our file had a different checksum., fileID=DefaultFile, collectionID=TwoPillarCollection]
          Result: Received message on TEST-ALARM-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.AlarmMessage@7504b290[correlationID=e03a316a-f7ff-4240-9219-f5128b2ca36d, collectionID=TwoPillarCollection, destination=TEST-ALARM-TOPIC-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationWrongDestructiveChecksum-cibuild01-contributor, from=Pillar-badCaseOperationWrongDestructiveChecksum, to=<null>(default), version=30, minVersion=24, alarm=org.bitrepository.bitrepositoryelements.Alarm@d4de13b[origDateTime=2017-02-20T15:41:59.332+01:00, alarmCode=CHECKSUM_ALARM, alarmRaiser=Pillar-badCaseOperationWrongDestructiveChecksum, alarmText=Requested to replace the file 'DefaultFile' with checksum '1234cccccccc4321', but our file had a different checksum., fileID=DefaultFile, collectionID=TwoPillarCollection]]
        Step: Retrieve the FinalResponse for the ReplaceFile request
        Step: Pillar should have sent an alarm
      Test success: badCaseOperationWrongDestructiveChecksum
        Added fixture: Initialize a new Pillar.
      Test starting: goodCaseIdentification
        Description: Tests the identification for a ReplaceFile operation on the pillar for the successful scenario.
        Step: Set up constants and variables.
        Step: Setup for having the file and delivering pillar id
        Step: Create and send the identify request message.
          Result: Received message on TEST-TOPIC-goodCaseIdentification-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForReplaceFileResponse@375749fe[correlationID=91bdd8bc-99df-4d17-a7d1-c4b3041253ec, collectionID=TwoPillarCollection, destination=TEST-TOPIC-goodCaseIdentification-cibuild01, replyTo=TEST-TOPIC-Pillar-goodCaseIdentification-cibuild01-contributor, from=Pillar-goodCaseIdentification, to=goodCaseIdentification, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@65786553[responseCode=IDENTIFICATION_POSITIVE, responseText=Operation acknowledged and accepted.], fileID=DefaultFile, pillarID=Pillar-goodCaseIdentification, pillarChecksumSpec=<null>(default), timeToDeliver=org.bitrepository.bitrepositoryelements.TimeMeasureTYPE@2ab33a27[timeMeasureUnit=MILLISECONDS, timeMeasureValue=1000]]
        Step: Retrieve and validate the response getPillarID() the pillar.
      Test success: goodCaseIdentification
        Added fixture: Initialize a new Pillar.
      Test starting: goodCaseOperation
        Description: Tests the ReplaceFile operation on the pillar for the success scenario.
        Step: Set up constants and variables.
        Step: Setup for already having the file and delivering pillar id
        Step: Create and send the identify request message.
          Result: Received message on TEST-TOPIC-goodCaseOperation-cibuild01 : org.bitrepository.bitrepositorymessages.ReplaceFileProgressResponse@204b128b[correlationID=8a71af41-7af7-4992-8bfc-6a7833e82771, collectionID=TwoPillarCollection, destination=TEST-TOPIC-goodCaseOperation-cibuild01, replyTo=TEST-TOPIC-Pillar-goodCaseOperation-cibuild01-contributor, from=Pillar-goodCaseOperation, to=goodCaseOperation, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@68ffbc99[responseCode=OPERATION_ACCEPTED_PROGRESS, responseText=Performing the ReplaceFileRequest for file 'DefaultFile' at 'TwoPillarCollection'.], pillarID=Pillar-goodCaseOperation, pillarChecksumSpec=<null>(default), fileID=DefaultFile, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt]
          Result: Received message on TEST-TOPIC-goodCaseOperation-cibuild01 : org.bitrepository.bitrepositorymessages.ReplaceFileFinalResponse@56a150d0[correlationID=8a71af41-7af7-4992-8bfc-6a7833e82771, collectionID=TwoPillarCollection, destination=TEST-TOPIC-goodCaseOperation-cibuild01, replyTo=TEST-TOPIC-Pillar-goodCaseOperation-cibuild01-contributor, from=Pillar-goodCaseOperation, to=goodCaseOperation, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@2e86dfc5[responseCode=OPERATION_COMPLETED, responseText=<null>(default)], pillarID=Pillar-goodCaseOperation, pillarChecksumSpec=<null>(default), fileID=DefaultFile, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, checksumDataForExistingFile=<null>(default), checksumDataForNewFile=<null>(default)]
        Step: Retrieve the ProgressResponse for the GetFileIDs request
        Step: Retrieve the FinalResponse for the ReplaceFile request
      Test success: goodCaseOperation
        Added fixture: Initialize a new Pillar.
      Test starting: goodCaseOperationWithChecksumsReturn
        Description: Tests the ReplaceFile operation on the pillar for the success scenario, when requesting both the cheksums of the file returned.
        Step: Set up constants and variables.
        Step: Setup for already having the file and delivering pillar id
        Step: Create and send the identify request message.
          Result: Received message on TEST-TOPIC-goodCaseOperationWithChecksumsReturn-cibuild01 : org.bitrepository.bitrepositorymessages.ReplaceFileProgressResponse@5f7b4703[correlationID=1a108f0b-f2df-4e85-a5a1-1fc956e01610, collectionID=TwoPillarCollection, destination=TEST-TOPIC-goodCaseOperationWithChecksumsReturn-cibuild01, replyTo=TEST-TOPIC-Pillar-goodCaseOperationWithChecksumsReturn-cibuild01-contributor, from=Pillar-goodCaseOperationWithChecksumsReturn, to=goodCaseOperationWithChecksumsReturn, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@1339e23d[responseCode=OPERATION_ACCEPTED_PROGRESS, responseText=Performing the ReplaceFileRequest for file 'DefaultFile' at 'TwoPillarCollection'.], pillarID=Pillar-goodCaseOperationWithChecksumsReturn, pillarChecksumSpec=<null>(default), fileID=DefaultFile, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt]
          Result: Received message on TEST-TOPIC-goodCaseOperationWithChecksumsReturn-cibuild01 : org.bitrepository.bitrepositorymessages.ReplaceFileFinalResponse@722debf5[correlationID=1a108f0b-f2df-4e85-a5a1-1fc956e01610, collectionID=TwoPillarCollection, destination=TEST-TOPIC-goodCaseOperationWithChecksumsReturn-cibuild01, replyTo=TEST-TOPIC-Pillar-goodCaseOperationWithChecksumsReturn-cibuild01-contributor, from=Pillar-goodCaseOperationWithChecksumsReturn, to=goodCaseOperationWithChecksumsReturn, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@74482fff[responseCode=OPERATION_COMPLETED, responseText=<null>(default)], pillarID=Pillar-goodCaseOperationWithChecksumsReturn, pillarChecksumSpec=<null>(default), fileID=DefaultFile, fileAddress=file:../bitrepository-core/src/test/resources/test-files//default-test-file.txt, checksumDataForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@718e2d2a[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@2d7a012c[checksumType=HMAC_SHA512, checksumSalt={97,98}, otherChecksumType=<null>(default)], checksumValue={18,52,-52,-52,-52,-52,67,34}, calculationTimestamp=2017-02-20T15:42:02.038+01:00], checksumDataForNewFile=org.bitrepository.bitrepositoryelements.ChecksumDataForFileTYPE@30952535[checksumSpec=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@517c30f[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], checksumValue={18,52,-52,-52,-52,-52,67,33}, calculationTimestamp=2017-02-20T15:42:02.043+01:00]]
        Step: Retrieve the ProgressResponse for the GetFileIDs request
        Step: Retrieve the FinalResponse for the ReplaceFile request
      Test success: goodCaseOperationWithChecksumsReturn
      Test starting: getPillarCollectionsTest
      Test success: getPillarCollectionsTest
    Starting testcase ChecksumEntryTest
      Test starting: testExtendedTestCase
        Description: Test the ChecksumEntry
        Step: Create a ChecksumEntry
      Test success: testExtendedTestCase
    Starting testcase DeleteFileTest
        Added fixture: Initialize a new Pillar.
      Test starting: badCaseIdentification
        Description: Tests the identification for a DeleteFile operation on the checksum pillar for the failure scenario, when the file is missing.
        Step: Set up constants and variables.
        Step: Setup for delivering pillar id and not having the file 
        Step: Create and send the identify request message.
          Result: Received message on TEST-TOPIC-badCaseIdentification-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForDeleteFileResponse@23d9a633[correlationID=883ecbb0-79a7-4b7b-bdb4-d9b33d2997fb, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseIdentification-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseIdentification-cibuild01-contributor, from=Pillar-badCaseIdentification, to=badCaseIdentification, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@21cfa25[responseCode=FILE_NOT_FOUND_FAILURE, responseText=File not found.], fileID=DefaultFilebadCaseIdentification, pillarID=Pillar-badCaseIdentification, pillarChecksumSpec=<null>(default), timeToDeliver=<null>(default)]
        Step: Retrieve and validate the response getPillarID() the pillar.
      Test success: badCaseIdentification
        Added fixture: Initialize a new Pillar.
      Test starting: badCaseOperationMissingVerification
        Description: Tests the DeleteFile functionality of the pillar for the failure scenario, where it does not have the file.
        Step: Set up constants and variables.
        Step: Setup for delivering pillar id and having the file 
        Step: Create and send the actual DeleteFile message to the pillar.
          Result: Received message on TEST-TOPIC-badCaseOperationMissingVerification-cibuild01 : org.bitrepository.bitrepositorymessages.DeleteFileFinalResponse@1c25b58d[correlationID=248fca12-1a47-4834-a0e2-fc7af70e469a, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseOperationMissingVerification-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationMissingVerification-cibuild01-contributor, from=Pillar-badCaseOperationMissingVerification, to=badCaseOperationMissingVerification, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@466ecdf9[responseCode=EXISTING_FILE_CHECKSUM_FAILURE, responseText=No mandatory checksum for destructive operation was supplied.], pillarID=Pillar-badCaseOperationMissingVerification, fileID=DefaultFilebadCaseOperationMissingVerification, checksumDataForExistingFile=<null>(default)]
15:42:04.508 WARN  o.b.p.common.PillarAlarmDispatcher - Sending alarm: org.bitrepository.bitrepositoryelements.Alarm@4f50d590[origDateTime=2017-02-20T15:42:04.507+01:00, alarmCode=CHECKSUM_ALARM, alarmRaiser=Pillar-badCaseOperationMissingVerification, alarmText=No mandatory checksum for destructive operation was supplied., fileID=DefaultFilebadCaseOperationMissingVerification, collectionID=TwoPillarCollection]
          Result: Received message on TEST-ALARM-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.AlarmMessage@7ee8882a[correlationID=2c4e4df2-dbfe-4e91-8f2f-abe1ec3f8707, collectionID=TwoPillarCollection, destination=TEST-ALARM-TOPIC-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationMissingVerification-cibuild01-contributor, from=Pillar-badCaseOperationMissingVerification, to=<null>(default), version=30, minVersion=24, alarm=org.bitrepository.bitrepositoryelements.Alarm@4f50d590[origDateTime=2017-02-20T15:42:04.507+01:00, alarmCode=CHECKSUM_ALARM, alarmRaiser=Pillar-badCaseOperationMissingVerification, alarmText=No mandatory checksum for destructive operation was supplied., fileID=DefaultFilebadCaseOperationMissingVerification, collectionID=TwoPillarCollection]]
        Step: Retrieve the FinalResponse for the DeleteFile request
        Step: Pillar should have sent an alarm
      Test success: badCaseOperationMissingVerification
        Added fixture: Initialize a new Pillar.
      Test starting: badCaseOperationNoFile
        Description: Tests the DeleteFile functionality of the pillar for the failure scenario, where it does not have the file.
        Step: Set up constants and variables.
        Step: Setup for delivering pillar id and not having the file 
        Step: Create and send the actual DeleteFile message to the pillar.
          Result: Received message on TEST-TOPIC-badCaseOperationNoFile-cibuild01 : org.bitrepository.bitrepositorymessages.DeleteFileFinalResponse@2a71f2c1[correlationID=97652751-80fc-431d-9fbb-e167a70817e4, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseOperationNoFile-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationNoFile-cibuild01-contributor, from=Pillar-badCaseOperationNoFile, to=badCaseOperationNoFile, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@3d228c48[responseCode=FILE_NOT_FOUND_FAILURE, responseText=File not found.], pillarID=Pillar-badCaseOperationNoFile, fileID=DefaultFilebadCaseOperationNoFile, checksumDataForExistingFile=<null>(default)]
        Step: Retrieve the FinalResponse for the DeleteFile request
      Test success: badCaseOperationNoFile
        Added fixture: Initialize a new Pillar.
      Test starting: goodCaseIdentification
        Description: Tests the identification for a DeleteFile operation on the pillar for the successful scenario.
        Step: Set up constants and variables.
        Step: Setup for having the file and delivering pillar id
        Step: Create and send the identify request message.
          Result: Received message on TEST-TOPIC-goodCaseIdentification-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForDeleteFileResponse@65463b83[correlationID=3add276d-7d0d-4d1d-ae17-ad6ae887ec8c, collectionID=TwoPillarCollection, destination=TEST-TOPIC-goodCaseIdentification-cibuild01, replyTo=TEST-TOPIC-Pillar-goodCaseIdentification-cibuild01-contributor, from=Pillar-goodCaseIdentification, to=goodCaseIdentification, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@3bde2ba[responseCode=IDENTIFICATION_POSITIVE, responseText=Operation acknowledged and accepted.], fileID=DefaultFilegoodCaseIdentification, pillarID=Pillar-goodCaseIdentification, pillarChecksumSpec=<null>(default), timeToDeliver=org.bitrepository.bitrepositoryelements.TimeMeasureTYPE@26154a00[timeMeasureUnit=MILLISECONDS, timeMeasureValue=1000]]
        Step: Retrieve and validate the response getPillarID() the pillar.
      Test success: goodCaseIdentification
    Starting testcase FullPillarModelTest
      Test starting: testPillarModelBasicFunctionality
        Description: Test the basic functions of the full reference pillar model.
        Step: Check the pillar id in the pillar model
        Step: Ask whether it can handle a file of size 0
        Step: Ask whether it can handle a file of maximum size
        Step: Check the ChecksumPillarSpec
      Test success: testPillarModelBasicFunctionality
      Test starting: testPillarModelHasFile
        Description: Test that the file exists, when placed in the archive and cache
        Step: Setup
        Step: Check whether file exists and retrieve it.
        Step: Verify that no exceptions are thrown when verifying file existance.
        Step: Check retrieval of non-default checksum
      Test success: testPillarModelHasFile
      Test starting: testPillarModelNoFile
        Description: Test that the file exists, when placed in the archive and cache
        Step: Setup
        Step: Check whether file exists and try to retrieve it.
        Step: Verify that anexceptions are thrown when verifying file existance.
15:42:08.222 WARN  o.b.pillar.store.FileStorageModel - The file 'DefaultFile' has been requested, but we do not have that file in collection 'TwoPillarCollection'!
      Test success: testPillarModelNoFile
    Starting testcase GetChecksumsTest
        Added fixture: Initialize a new Pillar.
      Test starting: badCaseIdentification
        Description: Tests the identification for a GetChecksums operation on the pillar for the failure scenario, when the file is missing.
        Step: Set up constants and variables.
        Step: Setup for delivering pillar id and not having the file 
        Step: Create and send the identify request message.
          Result: Received message on TEST-TOPIC-badCaseIdentification-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForGetChecksumsResponse@47be1b38[correlationID=2065edc2-ab9c-4a3f-89ab-145a60fbde33, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseIdentification-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseIdentification-cibuild01-contributor, from=Pillar-badCaseIdentification, to=badCaseIdentification, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@7d425bf1[responseCode=FILE_NOT_FOUND_FAILURE, responseText=File not found.], fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@ca44cba[fileID=DefaultFilebadCaseIdentification, allFileIDs=<null>(default)], checksumRequestForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@6b4b8163[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], pillarID=Pillar-badCaseIdentification, pillarChecksumSpec=<null>(default), timeToDeliver=<null>(default)]
        Step: Retrieve and validate the response getPillarID() the pillar.
      Test success: badCaseIdentification
        Added fixture: Initialize a new Pillar.
      Test starting: badCaseOperationNoFile
        Description: Tests the GetChecksums functionality of the pillar for the failure scenario, where it does not have the file.
        Step: Set up constants and variables.
        Step: Setup for not having the file
        Step: Create and send the actual GetChecksums message to the pillar.
15:42:09.637 WARN  o.b.p.m.GetChecksumsRequestHandler - The following file is missing 'DefaultFilebadCaseOperationNoFile' at collection 'TwoPillarCollection'.
          Result: Received message on TEST-TOPIC-badCaseOperationNoFile-cibuild01 : org.bitrepository.bitrepositorymessages.GetChecksumsFinalResponse@522c56e8[correlationID=8f76f6d5-5043-48e7-a0d1-8ab42f91f632, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseOperationNoFile-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationNoFile-cibuild01-contributor, from=Pillar-badCaseOperationNoFile, to=badCaseOperationNoFile, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@69176296[responseCode=FILE_NOT_FOUND_FAILURE, responseText=File not found.], pillarID=Pillar-badCaseOperationNoFile, checksumRequestForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@66621937[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], resultingChecksums=<null>(default), partialResult=<null>(default)]
15:42:09.642 WARN  o.b.p.m.GetChecksumsRequestHandler - The following file is missing 'DefaultFilebadCaseOperationNoFile' at collection 'TwoPillarCollection'.
          Result: Received message on TEST-TOPIC-badCaseOperationNoFile-cibuild01 : org.bitrepository.bitrepositorymessages.GetChecksumsFinalResponse@37ad86cb[correlationID=8f76f6d5-5043-48e7-a0d1-8ab42f91f632, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseOperationNoFile-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationNoFile-cibuild01-contributor, from=Pillar-badCaseOperationNoFile, to=badCaseOperationNoFile, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@41709aa8[responseCode=FILE_NOT_FOUND_FAILURE, responseText=File not found.], pillarID=Pillar-badCaseOperationNoFile, checksumRequestForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@66621937[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], resultingChecksums=<null>(default), partialResult=<null>(default)]
        Step: Retrieve the FinalResponse for the GetChecksums request
      Test success: badCaseOperationNoFile
          Result: The following messages haven't been handled by the testcase: 
org.bitrepository.bitrepositorymessages.GetChecksumsFinalResponse@37ad86cb[correlationID=8f76f6d5-5043-48e7-a0d1-8ab42f91f632, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseOperationNoFile-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationNoFile-cibuild01-contributor, from=Pillar-badCaseOperationNoFile, to=badCaseOperationNoFile, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@41709aa8[responseCode=FILE_NOT_FOUND_FAILURE, responseText=File not found.], pillarID=Pillar-badCaseOperationNoFile, checksumRequestForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@66621937[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], resultingChecksums=<null>(default), partialResult=<null>(default)]
15:42:10.645 WARN  o.b.protocol.bus.MessageReceiver - The following messages haven't been handled by the testcase: 
org.bitrepository.bitrepositorymessages.GetChecksumsFinalResponse@37ad86cb[correlationID=8f76f6d5-5043-48e7-a0d1-8ab42f91f632, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseOperationNoFile-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationNoFile-cibuild01-contributor, from=Pillar-badCaseOperationNoFile, to=badCaseOperationNoFile, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@41709aa8[responseCode=FILE_NOT_FOUND_FAILURE, responseText=File not found.], pillarID=Pillar-badCaseOperationNoFile, checksumRequestForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@66621937[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], resultingChecksums=<null>(default), partialResult=<null>(default)]
        Added fixture: Initialize a new Pillar.
      Test starting: goodCaseIdentification
        Description: Tests the identification for a GetChecksums operation on the pillar for the successful scenario.
        Step: Set up constants and variables.
        Step: Setup for having the file and delivering pillar id
        Step: Create and send the identify request message.
          Result: Received message on TEST-TOPIC-goodCaseIdentification-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForGetChecksumsResponse@2f3f10a9[correlationID=fac2de39-8c6a-4c62-a87b-3fcff5154cb4, collectionID=TwoPillarCollection, destination=TEST-TOPIC-goodCaseIdentification-cibuild01, replyTo=TEST-TOPIC-Pillar-goodCaseIdentification-cibuild01-contributor, from=Pillar-goodCaseIdentification, to=goodCaseIdentification, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@659d72ca[responseCode=IDENTIFICATION_POSITIVE, responseText=Operation acknowledged and accepted.], fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@7957385c[fileID=DefaultFilegoodCaseIdentification, allFileIDs=<null>(default)], checksumRequestForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@71f76e87[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], pillarID=Pillar-goodCaseIdentification, pillarChecksumSpec=<null>(default), timeToDeliver=org.bitrepository.bitrepositoryelements.TimeMeasureTYPE@261a8248[timeMeasureUnit=MILLISECONDS, timeMeasureValue=1000]]
        Step: Retrieve and validate the response getPillarID() the pillar.
      Test success: goodCaseIdentification
        Added fixture: Initialize a new Pillar.
      Test starting: goodCaseOperationAllFiles
        Description: Tests the GetChecksums operation on the pillar for the successful scenario, when requesting all files.
        Step: Set up constants and variables.
        Step: Setup for having the file and delivering result-set
        Step: Create and send the actual GetChecksums message to the pillar.
          Result: Received message on TEST-TOPIC-goodCaseOperationAllFiles-cibuild01 : org.bitrepository.bitrepositorymessages.GetChecksumsProgressResponse@158f1b1a[correlationID=e45a6107-de28-48f7-b43d-fd59f1f36de1, collectionID=TwoPillarCollection, destination=TEST-TOPIC-goodCaseOperationAllFiles-cibuild01, replyTo=TEST-TOPIC-Pillar-goodCaseOperationAllFiles-cibuild01-contributor, from=Pillar-goodCaseOperationAllFiles, to=goodCaseOperationAllFiles, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@3e028c37[responseCode=OPERATION_ACCEPTED_PROGRESS, responseText=Starting to calculate checksums.], pillarID=Pillar-goodCaseOperationAllFiles, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@1a2e5a42[fileID=<null>(default), allFileIDs=true], checksumRequestForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@7e5090ef[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], resultAddress=<null>(default)]
          Result: Received message on TEST-TOPIC-goodCaseOperationAllFiles-cibuild01 : org.bitrepository.bitrepositorymessages.GetChecksumsFinalResponse@43ee5d81[correlationID=e45a6107-de28-48f7-b43d-fd59f1f36de1, collectionID=TwoPillarCollection, destination=TEST-TOPIC-goodCaseOperationAllFiles-cibuild01, replyTo=TEST-TOPIC-Pillar-goodCaseOperationAllFiles-cibuild01-contributor, from=Pillar-goodCaseOperationAllFiles, to=goodCaseOperationAllFiles, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@26683409[responseCode=OPERATION_COMPLETED, responseText=<null>(default)], pillarID=Pillar-goodCaseOperationAllFiles, checksumRequestForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@7e5090ef[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], resultingChecksums=org.bitrepository.bitrepositoryelements.ResultingChecksums@4f1ae33b[resultAddress=<null>(default), checksumDataItems={org.bitrepository.bitrepositoryelements.ChecksumDataForChecksumSpecTYPE@5a6528fa[fileID=DefaultFile, checksumValue={18,52,-52,-52,-52,-52,67,33}, calculationTimestamp=2017-02-20T15:42:12.180+01:00],org.bitrepository.bitrepositoryelements.ChecksumDataForChecksumSpecTYPE@6b566462[fileID=goodCaseOperationAllFiles-cibuild01--Test-File-1487601732164, checksumValue={18,52,-52,-52,-52,-52,67,34}, calculationTimestamp=1970-01-01T01:00:00.000+01:00]}], partialResult=false]
        Step: Retrieve the ProgressResponse for the GetChecksums request
        Step: Retrieve the FinalResponse for the GetChecksums request
      Test success: goodCaseOperationAllFiles
        Added fixture: Initialize a new Pillar.
      Test starting: goodCaseOperationSingleFile
        Description: Tests the GetChecksums operation on the pillar for the successful scenario when requesting one specific file.
        Step: Set up constants and variables.
        Step: Setup for having the file and delivering result-set
        Step: Create and send the actual GetChecksums message to the pillar.
          Result: Received message on TEST-TOPIC-goodCaseOperationSingleFile-cibuild01 : org.bitrepository.bitrepositorymessages.GetChecksumsProgressResponse@5d1e33e5[correlationID=9d121605-6566-4651-8b44-bcf64a6f8ad4, collectionID=TwoPillarCollection, destination=TEST-TOPIC-goodCaseOperationSingleFile-cibuild01, replyTo=TEST-TOPIC-Pillar-goodCaseOperationSingleFile-cibuild01-contributor, from=Pillar-goodCaseOperationSingleFile, to=goodCaseOperationSingleFile, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@504eab5f[responseCode=OPERATION_ACCEPTED_PROGRESS, responseText=Starting to calculate checksums.], pillarID=Pillar-goodCaseOperationSingleFile, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@41e43c90[fileID=DefaultFilegoodCaseOperationSingleFile, allFileIDs=<null>(default)], checksumRequestForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@7d474824[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], resultAddress=<null>(default)]
          Result: Received message on TEST-TOPIC-goodCaseOperationSingleFile-cibuild01 : org.bitrepository.bitrepositorymessages.GetChecksumsFinalResponse@516acd72[correlationID=9d121605-6566-4651-8b44-bcf64a6f8ad4, collectionID=TwoPillarCollection, destination=TEST-TOPIC-goodCaseOperationSingleFile-cibuild01, replyTo=TEST-TOPIC-Pillar-goodCaseOperationSingleFile-cibuild01-contributor, from=Pillar-goodCaseOperationSingleFile, to=goodCaseOperationSingleFile, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@745b8053[responseCode=OPERATION_COMPLETED, responseText=<null>(default)], pillarID=Pillar-goodCaseOperationSingleFile, checksumRequestForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@7d474824[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], resultingChecksums=org.bitrepository.bitrepositoryelements.ResultingChecksums@143b32f4[resultAddress=<null>(default), checksumDataItems={org.bitrepository.bitrepositoryelements.ChecksumDataForChecksumSpecTYPE@53fa5e3f[fileID=DefaultFilegoodCaseOperationSingleFile, checksumValue={18,52,-52,-52,-52,-52,67,33}, calculationTimestamp=2017-02-20T15:42:12.377+01:00]}], partialResult=false]
        Step: Retrieve the ProgressResponse for the GetChecksums request
        Step: Retrieve the FinalResponse for the GetChecksums request
      Test success: goodCaseOperationSingleFile
        Added fixture: Initialize a new Pillar.
      Test starting: testRestrictions
        Description: Tests that the restrictions are correctly passed on to the cache.
        Step: Set up constants and variables.
        Step: Setup for only delivering result-set when the correct restrictions are given.
        Step: Create and send the actual GetChecksums message to the pillar.
          Result: Received message on TEST-TOPIC-testRestrictions-cibuild01 : org.bitrepository.bitrepositorymessages.GetChecksumsProgressResponse@332c8e2c[correlationID=b2773e9a-e7eb-4a4d-a975-2400562694a3, collectionID=TwoPillarCollection, destination=TEST-TOPIC-testRestrictions-cibuild01, replyTo=TEST-TOPIC-Pillar-testRestrictions-cibuild01-contributor, from=Pillar-testRestrictions, to=testRestrictions, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@2f98755d[responseCode=OPERATION_ACCEPTED_PROGRESS, responseText=Starting to calculate checksums.], pillarID=Pillar-testRestrictions, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@43a99a43[fileID=<null>(default), allFileIDs=true], checksumRequestForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@178b2df1[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], resultAddress=<null>(default)]
          Result: Received message on TEST-TOPIC-testRestrictions-cibuild01 : org.bitrepository.bitrepositorymessages.GetChecksumsFinalResponse@40818cc2[correlationID=b2773e9a-e7eb-4a4d-a975-2400562694a3, collectionID=TwoPillarCollection, destination=TEST-TOPIC-testRestrictions-cibuild01, replyTo=TEST-TOPIC-Pillar-testRestrictions-cibuild01-contributor, from=Pillar-testRestrictions, to=testRestrictions, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@2c5f3b12[responseCode=OPERATION_COMPLETED, responseText=<null>(default)], pillarID=Pillar-testRestrictions, checksumRequestForExistingFile=org.bitrepository.bitrepositoryelements.ChecksumSpecTYPE@178b2df1[checksumType=MD5, checksumSalt=<null>(default), otherChecksumType=<null>(default)], resultingChecksums=org.bitrepository.bitrepositoryelements.ResultingChecksums@23abc758[resultAddress=<null>(default), checksumDataItems={org.bitrepository.bitrepositoryelements.ChecksumDataForChecksumSpecTYPE@6d819279[fileID=DefaultFile, checksumValue={18,52,-52,-52,-52,-52,67,33}, calculationTimestamp=2017-02-20T15:42:12.567+01:00]}], partialResult=false]
        Step: Retrieve the ProgressResponse for the GetChecksums request
        Step: Retrieve the FinalResponse for the GetChecksums request
      Test success: testRestrictions
      Test starting: componentIDTest
      Test success: componentIDTest
    Starting testcase RecalculateChecksumWorkflowTest
        Added fixture: Initialize the Reference pillar cache with an empty file in default collection TwoPillarCollection
      Test starting: testWorkflowDoesNotRecalculateWhenNotNeeded
        Description: Test that the workflow does not recalculates the workflows, when the maximum age has not yet been met.
        Step: Create and run workflow
      Test success: testWorkflowDoesNotRecalculateWhenNotNeeded
        Added fixture: Initialize the Reference pillar cache with an empty file in default collection TwoPillarCollection
      Test starting: testWorkflowRecalculatesChecksum
        Description: Test that the workflow recalculates the workflows, when the maximum age has been met.
        Step: Create and run workflow
      Test success: testWorkflowRecalculatesChecksum
    Starting testcase GetFileIDsTest
        Added fixture: Initialize a new Pillar.
      Test starting: badCaseIdentification
        Description: Tests the identification for a GetFileIDs operation on the pillar for the failure scenario, when the file is missing.
        Step: Set up constants and variables.
        Step: Setup for delivering pillar id and not having the file 
        Step: Create and send the identify request message.
15:42:13.502 WARN  o.b.p.m.IdentifyPillarsForGetFileIDsRequestHandler - The following file is missing 'DefaultFilebadCaseIdentification' at collection 'TwoPillarCollection'.
          Result: Received message on TEST-TOPIC-badCaseIdentification-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForGetFileIDsResponse@545ae342[correlationID=f976fc99-5a92-4a4c-b1c6-b8bc205bf320, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseIdentification-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseIdentification-cibuild01-contributor, from=Pillar-badCaseIdentification, to=badCaseIdentification, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@7fddeb5[responseCode=FILE_NOT_FOUND_FAILURE, responseText=File not found.], pillarID=Pillar-badCaseIdentification, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@4098b2ec[fileID=DefaultFilebadCaseIdentification, allFileIDs=<null>(default)], timeToDeliver=<null>(default)]
        Step: Retrieve and validate the response getPillarID() the pillar.
      Test success: badCaseIdentification
        Added fixture: Initialize a new Pillar.
      Test starting: badCaseOperationNoFile
        Description: Tests the GetFileIDs functionality of the pillar for the failure scenario, where it does not have the file.
        Step: Set up constants and variables.
        Step: Setup for not having the file
        Step: Create and send the actual GetFileIDs message to the pillar.
15:42:14.703 WARN  o.b.p.m.GetFileIDsRequestHandler - The following file is missing 'DefaultFilebadCaseOperationNoFile' at collection 'TwoPillarCollection'.
          Result: Received message on TEST-TOPIC-badCaseOperationNoFile-cibuild01 : org.bitrepository.bitrepositorymessages.GetFileIDsFinalResponse@60f66861[correlationID=deaecf36-3138-4f7c-afbf-793bad71623b, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseOperationNoFile-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationNoFile-cibuild01-contributor, from=Pillar-badCaseOperationNoFile, to=badCaseOperationNoFile, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@690e281f[responseCode=FILE_NOT_FOUND_FAILURE, responseText=File not found.], pillarID=Pillar-badCaseOperationNoFile, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@7589a53a[fileID=DefaultFilebadCaseOperationNoFile, allFileIDs=<null>(default)], resultingFileIDs=<null>(default), partialResult=<null>(default)]
15:42:14.710 WARN  o.b.p.m.GetFileIDsRequestHandler - The following file is missing 'DefaultFilebadCaseOperationNoFile' at collection 'TwoPillarCollection'.
          Result: Received message on TEST-TOPIC-badCaseOperationNoFile-cibuild01 : org.bitrepository.bitrepositorymessages.GetFileIDsFinalResponse@6c4647d2[correlationID=deaecf36-3138-4f7c-afbf-793bad71623b, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseOperationNoFile-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationNoFile-cibuild01-contributor, from=Pillar-badCaseOperationNoFile, to=badCaseOperationNoFile, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@545e9f15[responseCode=FILE_NOT_FOUND_FAILURE, responseText=File not found.], pillarID=Pillar-badCaseOperationNoFile, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@7589a53a[fileID=DefaultFilebadCaseOperationNoFile, allFileIDs=<null>(default)], resultingFileIDs=<null>(default), partialResult=<null>(default)]
15:42:14.712 WARN  o.b.p.m.GetFileIDsRequestHandler - The following file is missing 'DefaultFilebadCaseOperationNoFile' at collection 'TwoPillarCollection'.
          Result: Received message on TEST-TOPIC-badCaseOperationNoFile-cibuild01 : org.bitrepository.bitrepositorymessages.GetFileIDsFinalResponse@31524d39[correlationID=deaecf36-3138-4f7c-afbf-793bad71623b, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseOperationNoFile-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationNoFile-cibuild01-contributor, from=Pillar-badCaseOperationNoFile, to=badCaseOperationNoFile, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@6f74e416[responseCode=FILE_NOT_FOUND_FAILURE, responseText=File not found.], pillarID=Pillar-badCaseOperationNoFile, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@7589a53a[fileID=DefaultFilebadCaseOperationNoFile, allFileIDs=<null>(default)], resultingFileIDs=<null>(default), partialResult=<null>(default)]
        Step: Retrieve the FinalResponse for the GetFileIDs request
      Test success: badCaseOperationNoFile
          Result: The following messages haven't been handled by the testcase: 
org.bitrepository.bitrepositorymessages.GetFileIDsFinalResponse@6c4647d2[correlationID=deaecf36-3138-4f7c-afbf-793bad71623b, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseOperationNoFile-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationNoFile-cibuild01-contributor, from=Pillar-badCaseOperationNoFile, to=badCaseOperationNoFile, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@545e9f15[responseCode=FILE_NOT_FOUND_FAILURE, responseText=File not found.], pillarID=Pillar-badCaseOperationNoFile, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@7589a53a[fileID=DefaultFilebadCaseOperationNoFile, allFileIDs=<null>(default)], resultingFileIDs=<null>(default), partialResult=<null>(default)]
org.bitrepository.bitrepositorymessages.GetFileIDsFinalResponse@31524d39[correlationID=deaecf36-3138-4f7c-afbf-793bad71623b, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseOperationNoFile-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationNoFile-cibuild01-contributor, from=Pillar-badCaseOperationNoFile, to=badCaseOperationNoFile, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@6f74e416[responseCode=FILE_NOT_FOUND_FAILURE, responseText=File not found.], pillarID=Pillar-badCaseOperationNoFile, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@7589a53a[fileID=DefaultFilebadCaseOperationNoFile, allFileIDs=<null>(default)], resultingFileIDs=<null>(default), partialResult=<null>(default)]
15:42:15.715 WARN  o.b.protocol.bus.MessageReceiver - The following messages haven't been handled by the testcase: 
org.bitrepository.bitrepositorymessages.GetFileIDsFinalResponse@6c4647d2[correlationID=deaecf36-3138-4f7c-afbf-793bad71623b, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseOperationNoFile-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationNoFile-cibuild01-contributor, from=Pillar-badCaseOperationNoFile, to=badCaseOperationNoFile, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@545e9f15[responseCode=FILE_NOT_FOUND_FAILURE, responseText=File not found.], pillarID=Pillar-badCaseOperationNoFile, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@7589a53a[fileID=DefaultFilebadCaseOperationNoFile, allFileIDs=<null>(default)], resultingFileIDs=<null>(default), partialResult=<null>(default)]
org.bitrepository.bitrepositorymessages.GetFileIDsFinalResponse@31524d39[correlationID=deaecf36-3138-4f7c-afbf-793bad71623b, collectionID=TwoPillarCollection, destination=TEST-TOPIC-badCaseOperationNoFile-cibuild01, replyTo=TEST-TOPIC-Pillar-badCaseOperationNoFile-cibuild01-contributor, from=Pillar-badCaseOperationNoFile, to=badCaseOperationNoFile, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@6f74e416[responseCode=FILE_NOT_FOUND_FAILURE, responseText=File not found.], pillarID=Pillar-badCaseOperationNoFile, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@7589a53a[fileID=DefaultFilebadCaseOperationNoFile, allFileIDs=<null>(default)], resultingFileIDs=<null>(default), partialResult=<null>(default)]
        Added fixture: Initialize a new Pillar.
      Test starting: goodCaseIdentification
        Description: Tests the identification for a GetFileIDs operation on the pillar for the successful scenario.
        Step: Set up constants and variables.
        Step: Setup for having the file and delivering pillar id
        Step: Create and send the identify request message.
          Result: Received message on TEST-TOPIC-goodCaseIdentification-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyPillarsForGetFileIDsResponse@577cb38d[correlationID=9b75ad49-72ce-4fbc-bbd8-f51c142ce1db, collectionID=TwoPillarCollection, destination=TEST-TOPIC-goodCaseIdentification-cibuild01, replyTo=TEST-TOPIC-Pillar-goodCaseIdentification-cibuild01-contributor, from=Pillar-goodCaseIdentification, to=goodCaseIdentification, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@6105522c[responseCode=IDENTIFICATION_POSITIVE, responseText=Operation acknowledged and accepted.], pillarID=Pillar-goodCaseIdentification, fileIDs=org.bitrepository.bitrepositoryelements.FileIDs@424e7ab8[fileID=DefaultFilegoodCaseIdentification, allFileIDs=<null>(default)], timeToDeliver=org.bitrepository.bitrepositoryelements.TimeMeasureTYPE@6e9aa67d[timeMeasureUnit=MILLISECONDS, timeMeasureValue=1000]]
        Step: Retrieve and validate the response getPillarID() the pillar.
      Test success: goodCaseIdentification
    Starting testcase ReferenceArchiveTest
        Added fixture: Initialize the Reference pillar cache with an empty file in default collection TwoPillarCollection
      Test starting: testReferenceArchive
        Description: Test the ReferenceArchive.
        Step: Setup
        Step: test 'hasFile'
        Step: Test 'getFile'
        Step: Test getAllFileIDs
        Step: Test 'getFileAsInputstream'
        Step: Delete, recreate and delete again
        Step: Try to delete missing file.
        Step: Replace a file, which does not exist in the filedir.
        Step: Copy a file into the tmpDir and then use replace.
        Step: Try performing the replace, when the file in the tempdir has been removed.
      Test success: testReferenceArchive
    Starting testcase ArchiveDirectoryTest
      Test starting: testArchiveDirectoryExistingFile
        Description: Test the ArchiveDirectory when the file exists
        Step: Setup
        Step: Validate the existence of the file
        Step: Delete the file.
      Test success: testArchiveDirectoryExistingFile
      Test starting: testArchiveDirectoryExistingFolderFile
        Description: Test the ArchiveDirectory when the file exists
        Step: Setup
        Step: Validate the existence of the file
        Step: Delete the file.
      Test success: testArchiveDirectoryExistingFolderFile
      Test starting: testArchiveDirectoryMissingFile
        Description: Test the ArchiveDirectory when the file is missing.
        Step: Setup
        Step: Validate the existence of the file
        Step: Delete the file.
      Test success: testArchiveDirectoryMissingFile
      Test starting: testArchiveDirectoryMissingFolderFile
        Description: Test the ArchiveDirectory when the file is missing.
        Step: Setup
        Step: Validate the existence of the file
        Step: Delete the file.
      Test success: testArchiveDirectoryMissingFolderFile
      Test starting: testArchiveDirectoryMoveFileToArchive
        Description: Testing the error scenarios when moving a file from tmp to archive for the ArchiveDirectory.
        Step: Setup
        Step: Moving file from tmp to archive
        Step: Create file in both tmp and archive.
        Step: Moving file from tmp to archive
        Step: Remove the file from archive and try again
      Test success: testArchiveDirectoryMoveFileToArchive
      Test starting: testArchiveDirectoryMoveFolderFileToArchive
        Description: Testing the error scenarios when moving a file from tmp to archive for the ArchiveDirectory.
        Step: Setup
        Step: Moving file from tmp to archive
        Step: Create file in both tmp and archive.
        Step: Moving file from tmp to archive
        Step: Remove the file from archive and try again
      Test success: testArchiveDirectoryMoveFolderFileToArchive
      Test starting: testArchiveDirectoryNewFile
        Description: Testing the ArchiveDirectory handling of a new file.
        Step: Setup
        Step: Retrieve tmp file
        Step: Request a new file for the tmp dir
        Step: Retrieve tmp file
        Step: Request another new file with the same name
        Step: Move the file from tmp to archive
      Test success: testArchiveDirectoryNewFile
      Test starting: testArchiveDirectoryNewFolderFile
        Description: Testing the ArchiveDirectory handling of a new file.
        Step: Setup
        Step: Retrieve tmp file
        Step: Request a new file for the tmp dir
        Step: Retrieve tmp file
        Step: Request another new file with the same name
        Step: Move the file from tmp to archive
      Test success: testArchiveDirectoryNewFolderFile
      Test starting: testArchiveDirectoryRemoveFile
        Description: Testing the error scenarios when removing files from the archive.
        Step: Setup
        Step: Remove nonexisting file from archive
        Step: Remove nonexisting file from tmp
        Step: Create file in both tmp, archive and retain directories.
        Step: Remove the file from archive and tmp
      Test success: testArchiveDirectoryRemoveFile
      Test starting: testArchiveDirectoryRemoveFolderFile
        Description: Testing the error scenarios when removing files from the archive.
        Step: Setup
        Step: Remove nonexisting file from archive
        Step: Remove nonexisting file from tmp
        Step: Create file in both tmp, archive and retain directories.
        Step: Remove the file from archive and tmp
      Test success: testArchiveDirectoryRemoveFolderFile
    Starting testcase MediatorTest
      Test starting: testMediatorRuntimeExceptionHandling
        Description: Tests the handling of a runtime exception
        Step: Setup create and start the mediator.
        Step: Send a request to the mediator.
15:42:18.463 WARN  o.b.pillar.MediatorTest$TestMediator - Unexpected exception caught.
java.lang.RuntimeException: I am supposed to throw a RuntimeException
	at org.bitrepository.pillar.MediatorTest$ErroneousRequestHandler.processRequest(MediatorTest.java:122)
	at org.bitrepository.pillar.MediatorTest$ErroneousRequestHandler.processRequest(MediatorTest.java:113)
	at org.bitrepository.pillar.messagehandler.PillarMediator.handleRequest(PillarMediator.java:80)
	at org.bitrepository.service.contributor.AbstractContributorMediator$GeneralRequestHandler.onMessage(AbstractContributorMediator.java:101)
	at org.bitrepository.protocol.messagebus.SimpleMessageBus.lambda$sendMessage$0(SimpleMessageBus.java:73)
	at java.lang.Iterable.forEach(Iterable.java:75)
	at org.bitrepository.protocol.messagebus.SimpleMessageBus.sendMessage(SimpleMessageBus.java:73)
	at org.bitrepository.pillar.MediatorTest.testMediatorRuntimeExceptionHandling(MediatorTest.java:84)
	at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
	at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
	at java.lang.reflect.Method.invoke(Method.java:498)
	at org.testng.internal.MethodInvocationHelper.invokeMethod(MethodInvocationHelper.java:86)
	at org.testng.internal.Invoker.invokeMethod(Invoker.java:643)
	at org.testng.internal.Invoker.invokeTestMethod(Invoker.java:820)
	at org.testng.internal.Invoker.invokeTestMethods(Invoker.java:1128)
	at org.testng.internal.TestMethodWorker.invokeTestMethods(TestMethodWorker.java:129)
	at org.testng.internal.TestMethodWorker.run(TestMethodWorker.java:112)
	at org.testng.TestRunner.privateRun(TestRunner.java:782)
	at org.testng.TestRunner.run(TestRunner.java:632)
	at org.testng.SuiteRunner.runTest(SuiteRunner.java:366)
	at org.testng.SuiteRunner.runSequentially(SuiteRunner.java:361)
	at org.testng.SuiteRunner.privateRun(SuiteRunner.java:319)
	at org.testng.SuiteRunner.run(SuiteRunner.java:268)
	at org.testng.SuiteRunnerWorker.runSuite(SuiteRunnerWorker.java:52)
	at org.testng.SuiteRunnerWorker.run(SuiteRunnerWorker.java:86)
	at org.testng.TestNG.runSuitesSequentially(TestNG.java:1244)
	at org.testng.TestNG.runSuitesLocally(TestNG.java:1169)
	at org.testng.TestNG.run(TestNG.java:1064)
	at org.apache.maven.surefire.testng.TestNGExecutor.run(TestNGExecutor.java:115)
	at org.apache.maven.surefire.testng.TestNGDirectoryTestSuite.executeMulti(TestNGDirectoryTestSuite.java:204)
	at org.apache.maven.surefire.testng.TestNGDirectoryTestSuite.execute(TestNGDirectoryTestSuite.java:107)
	at org.apache.maven.surefire.testng.TestNGProvider.invoke(TestNGProvider.java:112)
	at org.apache.maven.surefire.booter.ForkedBooter.invokeProviderInSameClassLoader(ForkedBooter.java:200)
	at org.apache.maven.surefire.booter.ForkedBooter.runSuitesInProcess(ForkedBooter.java:153)
	at org.apache.maven.surefire.booter.ForkedBooter.main(ForkedBooter.java:103)
          Result: Received message on TEST-TOPIC-testMediatorRuntimeExceptionHandling-cibuild01 : org.bitrepository.bitrepositorymessages.IdentifyContributorsForGetStatusResponse@44aac8fd[correlationID=336336b3-68c8-4f50-bd2b-6240d952b1c1, collectionID=TwoPillarCollection, destination=TEST-TOPIC-testMediatorRuntimeExceptionHandling-cibuild01, replyTo=TEST-TOPIC-MediatorUnderTest-cibuild01-contributor, from=MediatorUnderTest, to=MediatorUnderTest, version=30, minVersion=24, responseInfo=org.bitrepository.bitrepositoryelements.ResponseInfo@4efccfc7[responseCode=FAILURE, responseText=java.lang.RuntimeException: I am supposed to throw a RuntimeException], contributor=TEST-TOPIC-cibuild01, timeToDeliver=<null>(default)]
15:42:18.467 WARN  o.b.p.common.PillarAlarmDispatcher - Sending alarm: org.bitrepository.bitrepositoryelements.Alarm@506bc254[origDateTime=2017-02-20T15:42:18.466+01:00, alarmCode=COMPONENT_FAILURE, alarmRaiser=MediatorUnderTest, alarmText=java.lang.RuntimeException: I am supposed to throw a RuntimeException, fileID=<null>(default), collectionID=<null>(default)]
          Result: Received message on TEST-ALARM-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.AlarmMessage@42140584[correlationID=117893c6-fcd0-427a-97a5-5bb80b16787d, collectionID=<null>(default), destination=TEST-ALARM-TOPIC-cibuild01, replyTo=TEST-TOPIC-MediatorUnderTest-cibuild01-contributor, from=MediatorUnderTest, to=<null>(default), version=30, minVersion=24, alarm=org.bitrepository.bitrepositoryelements.Alarm@506bc254[origDateTime=2017-02-20T15:42:18.466+01:00, alarmCode=COMPONENT_FAILURE, alarmRaiser=MediatorUnderTest, alarmText=java.lang.RuntimeException: I am supposed to throw a RuntimeException, fileID=<null>(default), collectionID=<null>(default)]]
      Test success: testMediatorRuntimeExceptionHandling
      Finished testcase
  Finished suite
Finished project
Tests run: 64, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 59.921 sec - in TestSuite

Results :

Tests run: 64, Failures: 0, Errors: 0, Skipped: 0

[JENKINS] Recording test results
[INFO] 
[INFO] --- jacoco-maven-plugin:0.7.5.201505241946:report (report) @ bitrepository-reference-pillar ---
[INFO] Analyzed bundle 'Bitrepository Reference Pillar' with 43 classes
[INFO] 
[INFO] --- maven-jar-plugin:2.4:jar (default-jar) @ bitrepository-reference-pillar ---
[INFO] Building jar: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-reference-pillar/target/bitrepository-reference-pillar-1.9-SNAPSHOT.jar
[INFO] 
[INFO] --- maven-jar-plugin:2.4:test-jar (default) @ bitrepository-reference-pillar ---
[INFO] Building jar: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-reference-pillar/target/bitrepository-reference-pillar-1.9-SNAPSHOT-tests.jar
[INFO] 
[INFO] --- maven-source-plugin:2.2.1:jar-no-fork (attach-sources-no-fork) @ bitrepository-reference-pillar ---
[INFO] Building jar: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-reference-pillar/target/bitrepository-reference-pillar-1.9-SNAPSHOT-sources.jar
[INFO] 
[INFO] --- maven-assembly-plugin:2.4:single (distribution) @ bitrepository-reference-pillar ---
[INFO] Reading assembly descriptor: src/main/assembly/assembly.xml
[INFO] Reading assembly descriptor: src/test/assembly/assembly.xml
[INFO] Reading assembly descriptor: src/main/assembly/deploy-assembly.xml
[INFO] Reading assembly descriptor: src/test/assembly/test-deploy-assembly.xml
[INFO] Building tar: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-reference-pillar/target/bitrepository-reference-pillar-1.9-SNAPSHOT-distribution.tar.gz
[INFO] Building tar: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-reference-pillar/target/bitrepository-reference-pillar-1.9-SNAPSHOT-acceptance-test.tar.gz
[WARNING] Entry: bitrepository-reference-pillar-1.9-SNAPSHOT/lib/bitrepository-reference-pillar-1.9-SNAPSHOT-tests.jar longer than 100 characters.
[WARNING] Resulting tar file can only be processed successfully by GNU compatible tar commands
[INFO] Building tar: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-reference-pillar/target/bitrepository-reference-pillar-1.9-SNAPSHOT-deploy.tar.gz
[INFO] Building tar: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-reference-pillar/target/bitrepository-reference-pillar-1.9-SNAPSHOT-acceptance-test-deploy.tar.gz
[INFO] 
[INFO] --- maven-install-plugin:2.5.1:install (default-install) @ bitrepository-reference-pillar ---
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-reference-pillar/target/bitrepository-reference-pillar-1.9-SNAPSHOT.jar to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-SNAPSHOT.jar
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-reference-pillar/pom.xml to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-SNAPSHOT.pom
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-reference-pillar/target/bitrepository-reference-pillar-1.9-SNAPSHOT-tests.jar to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-SNAPSHOT-tests.jar
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-reference-pillar/target/bitrepository-reference-pillar-1.9-SNAPSHOT-sources.jar to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-SNAPSHOT-sources.jar
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-reference-pillar/target/bitrepository-reference-pillar-1.9-SNAPSHOT-distribution.tar.gz to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-SNAPSHOT-distribution.tar.gz
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-reference-pillar/target/bitrepository-reference-pillar-1.9-SNAPSHOT-acceptance-test.tar.gz to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-SNAPSHOT-acceptance-test.tar.gz
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-reference-pillar/target/bitrepository-reference-pillar-1.9-SNAPSHOT-deploy.tar.gz to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-SNAPSHOT-deploy.tar.gz
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-reference-pillar/target/bitrepository-reference-pillar-1.9-SNAPSHOT-acceptance-test-deploy.tar.gz to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-SNAPSHOT-acceptance-test-deploy.tar.gz
[INFO] 
[INFO] --- maven-deploy-plugin:2.8.1:deploy (default-deploy) @ bitrepository-reference-pillar ---
[INFO] Downloading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Downloaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/maven-metadata.xml (3 KB at 89.6 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-20170220.144223-10.jar
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-20170220.144223-10.jar (128 KB at 3260.0 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-20170220.144223-10.pom
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-20170220.144223-10.pom (8 KB at 191.6 KB/sec)
[INFO] Downloading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/maven-metadata.xml
[INFO] Downloaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/maven-metadata.xml (455 B at 16.5 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/maven-metadata.xml (3 KB at 54.3 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/maven-metadata.xml (455 B at 11.1 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-20170220.144223-10-tests.jar
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-20170220.144223-10-tests.jar (238 KB at 3647.0 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/maven-metadata.xml (3 KB at 52.9 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-20170220.144223-10-sources.jar
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-20170220.144223-10-sources.jar (104 KB at 2722.0 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/maven-metadata.xml (3 KB at 89.8 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-20170220.144223-10-distribution.tar.gz
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-20170220.144223-10-distribution.tar.gz (13312 KB at 25307.2 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/maven-metadata.xml (3 KB at 66.7 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-20170220.144223-10-acceptance-test.tar.gz
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-20170220.144223-10-acceptance-test.tar.gz (12947 KB at 21906.6 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/maven-metadata.xml (3 KB at 79.5 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-20170220.144223-10-deploy.tar.gz
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-20170220.144223-10-deploy.tar.gz (4 KB at 135.4 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/maven-metadata.xml (3 KB at 41.4 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-20170220.144223-10-acceptance-test-deploy.tar.gz
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/bitrepository-reference-pillar-1.9-20170220.144223-10-acceptance-test-deploy.tar.gz (4 KB at 86.8 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-reference-pillar/1.9-SNAPSHOT/maven-metadata.xml (3 KB at 59.1 KB/sec)
[JENKINS] Archiving disabled
[INFO]                                                                         
[INFO] ------------------------------------------------------------------------
[INFO] Building Bitrepository Monitoring Service 1.9-SNAPSHOT
[INFO] ------------------------------------------------------------------------
[INFO] 
[INFO] --- maven-clean-plugin:2.5:clean (default-clean) @ bitrepository-monitoring-service ---
[INFO] Deleting /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-monitoring-service/target
[INFO] 
[INFO] --- jacoco-maven-plugin:0.7.5.201505241946:prepare-agent (default) @ bitrepository-monitoring-service ---
[INFO] argLine set to -javaagent:/home/cibuild01/.m2/repository/org/jacoco/org.jacoco.agent/0.7.5.201505241946/org.jacoco.agent-0.7.5.201505241946-runtime.jar=destfile=/home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-monitoring-service/target/jacoco.exec
[INFO] 
[INFO] --- maven-resources-plugin:2.6:resources (default-resources) @ bitrepository-monitoring-service ---
[INFO] Using 'UTF-8' encoding to copy filtered resources.
[INFO] skip non existing resourceDirectory /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-monitoring-service/src/main/resources
[INFO] 
[INFO] --- maven-compiler-plugin:3.1:compile (default-compile) @ bitrepository-monitoring-service ---
[INFO] Changes detected - recompiling the module!
[INFO] Compiling 14 source files to /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-monitoring-service/target/classes
[INFO] 
[INFO] --- maven-resources-plugin:2.6:testResources (default-testResources) @ bitrepository-monitoring-service ---
[INFO] Using 'UTF-8' encoding to copy filtered resources.
[INFO] skip non existing resourceDirectory /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-monitoring-service/src/test/resources
[INFO] 
[INFO] --- maven-compiler-plugin:3.1:testCompile (default-testCompile) @ bitrepository-monitoring-service ---
[INFO] Changes detected - recompiling the module!
[INFO] Compiling 7 source files to /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-monitoring-service/target/test-classes
[INFO] 
[INFO] --- maven-surefire-plugin:2.17:test (default-test) @ bitrepository-monitoring-service ---
[INFO] Surefire report directory: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-monitoring-service/target/surefire-reports

-------------------------------------------------------
 T E S T S
-------------------------------------------------------
Running TestSuite
Configuring TestNG with: TestNG652Configurator
Starting test project Core module test
  Suite: Surefire suite
    Starting testcase StatusCollectorTest
      Test starting: testStatusCollector
        Description: Tests the status collector.
        Step: Setup
        Step: Create the collector
        Step: Start the collector
        Step: wait 2 * the interval
        Step: wait the interval + delay again
      Test success: testStatusCollector
    Starting testcase MonitorAlerterTest
      Test starting: testMonitorAlerter
        Description: Tests the org.bitrepository.monitoringservice.alarm.BasicMonitoringServiceAlerter
        Step: Setup
        Step: Create the alerter, but ignore the part of actually sending the alarms. Just log it.
        Step: Check statuses with an empty map.
        Step: Check the status when a positive entry exists.
        Step: Check the status when a negative entry exists.
15:42:36.224 WARN  o.b.m.a.BasicMonitoringServiceAlerter - Sending alarm: org.bitrepository.bitrepositoryelements.Alarm@15186ce0[origDateTime=2017-02-20T15:42:36.198+01:00, alarmCode=COMPONENT_FAILURE, alarmRaiser=MonitorAlerterUnderTest, alarmText=The following components have become unresponsive: [TestMonitorService], fileID=<null>(default), collectionID=<null>(default)]
          Result: Received message on TEST-ALARM-TOPIC-cibuild01 : org.bitrepository.bitrepositorymessages.AlarmMessage@573a078[correlationID=ab3ded48-673e-4e7a-987a-3991f5a659b8, collectionID=<null>(default), destination=TEST-ALARM-TOPIC-cibuild01, replyTo=TEST-TOPIC-MonitorAlerterUnderTest-cibuild01-contributor, from=MonitorAlerterUnderTest, to=<null>(default), version=30, minVersion=24, alarm=org.bitrepository.bitrepositoryelements.Alarm@15186ce0[origDateTime=2017-02-20T15:42:36.198+01:00, alarmCode=COMPONENT_FAILURE, alarmRaiser=MonitorAlerterUnderTest, alarmText=The following components have become unresponsive: [TestMonitorService], fileID=<null>(default), collectionID=<null>(default)]]
      Test success: testMonitorAlerter
    Starting testcase StatusEventHandlerTest
      Test starting: testStatusEventHandler
        Description: Test the GetStatusEventHandler handling of events
        Step: Setup
        Step: Validate initial calls to the mocks
        Step: Test an unhandled event.
        Step: Test the Complete event
        Step: Test the Failed event
        Step: Test the component complete status
      Test success: testStatusEventHandler
    Starting testcase ComponentStatusStoreTest
      Test starting: testComponentStatus
        Description: Tests the compontent status
        Step: Setup
        Step: Validate the initial content
        Step: Update the replay counts and validate 
        Step: Test what happens when an invalid component id attempted to be updated.
15:42:36.667 WARN  o.b.m.status.ComponentStatusStore - Got status from an unexpected component: BAD-COMPONENT-ID
        Step: Try giving it a positive status
      Test success: testComponentStatus
      Finished testcase
  Finished suite
Finished project
Tests run: 4, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 8.782 sec - in TestSuite

Results :

Tests run: 4, Failures: 0, Errors: 0, Skipped: 0

[JENKINS] Recording test results
[INFO] 
[INFO] --- jacoco-maven-plugin:0.7.5.201505241946:report (report) @ bitrepository-monitoring-service ---
[INFO] Analyzed bundle 'Bitrepository Monitoring Service' with 14 classes
[INFO] 
[INFO] --- maven-war-plugin:2.4:war (default-war) @ bitrepository-monitoring-service ---
[INFO] Packaging webapp
[INFO] Assembling webapp [bitrepository-monitoring-service] in [/home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-monitoring-service/target/bitrepository-monitoring-service-1.9-SNAPSHOT]
[INFO] Processing war project
[INFO] Copying webapp resources [/home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-monitoring-service/src/main/webapp]
[INFO] Webapp assembled in [115 msecs]
[INFO] Building war: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-monitoring-service/target/bitrepository-monitoring-service-1.9-SNAPSHOT.war
[INFO] 
[INFO] --- maven-jar-plugin:2.4:test-jar (default) @ bitrepository-monitoring-service ---
[INFO] Building jar: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-monitoring-service/target/bitrepository-monitoring-service-1.9-SNAPSHOT-tests.jar
[INFO] 
[INFO] --- maven-source-plugin:2.2.1:jar-no-fork (attach-sources-no-fork) @ bitrepository-monitoring-service ---
[INFO] Building jar: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-monitoring-service/target/bitrepository-monitoring-service-1.9-SNAPSHOT-sources.jar
[INFO] 
[INFO] --- maven-assembly-plugin:2.4:single (distribution) @ bitrepository-monitoring-service ---
[INFO] Reading assembly descriptor: src/main/assembly/assembly.xml
[INFO] Building tar: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-monitoring-service/target/bitrepository-monitoring-service-1.9-SNAPSHOT-distribution.tar.gz
[INFO] 
[INFO] --- maven-install-plugin:2.5.1:install (default-install) @ bitrepository-monitoring-service ---
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-monitoring-service/target/bitrepository-monitoring-service-1.9-SNAPSHOT.war to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/bitrepository-monitoring-service-1.9-SNAPSHOT.war
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-monitoring-service/pom.xml to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/bitrepository-monitoring-service-1.9-SNAPSHOT.pom
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-monitoring-service/target/bitrepository-monitoring-service-1.9-SNAPSHOT-tests.jar to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/bitrepository-monitoring-service-1.9-SNAPSHOT-tests.jar
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-monitoring-service/target/bitrepository-monitoring-service-1.9-SNAPSHOT-sources.jar to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/bitrepository-monitoring-service-1.9-SNAPSHOT-sources.jar
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-monitoring-service/target/bitrepository-monitoring-service-1.9-SNAPSHOT-distribution.tar.gz to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/bitrepository-monitoring-service-1.9-SNAPSHOT-distribution.tar.gz
[INFO] 
[INFO] --- maven-deploy-plugin:2.8.1:deploy (default-deploy) @ bitrepository-monitoring-service ---
[INFO] Downloading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Downloaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/maven-metadata.xml (2 KB at 19.9 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/bitrepository-monitoring-service-1.9-20170220.144240-10.war
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/bitrepository-monitoring-service-1.9-20170220.144240-10.war (18063 KB at 25368.5 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/bitrepository-monitoring-service-1.9-20170220.144240-10.pom
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/bitrepository-monitoring-service-1.9-20170220.144240-10.pom (4 KB at 90.5 KB/sec)
[INFO] Downloading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/maven-metadata.xml
[INFO] Downloaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/maven-metadata.xml (457 B at 29.8 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/maven-metadata.xml (2 KB at 40.4 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/maven-metadata.xml (457 B at 16.5 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/bitrepository-monitoring-service-1.9-20170220.144240-10-tests.jar
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/bitrepository-monitoring-service-1.9-20170220.144240-10-tests.jar (15 KB at 383.4 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/maven-metadata.xml (2 KB at 27.2 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/bitrepository-monitoring-service-1.9-20170220.144240-10-sources.jar
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/bitrepository-monitoring-service-1.9-20170220.144240-10-sources.jar (19 KB at 505.9 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/maven-metadata.xml (2 KB at 56.6 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/bitrepository-monitoring-service-1.9-20170220.144240-10-distribution.tar.gz
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/bitrepository-monitoring-service-1.9-20170220.144240-10-distribution.tar.gz (18061 KB at 25153.4 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-monitoring-service/1.9-SNAPSHOT/maven-metadata.xml (2 KB at 67.5 KB/sec)
[JENKINS] Archiving disabled
[INFO]                                                                         
[INFO] ------------------------------------------------------------------------
[INFO] Building Bitrepository Webclient 1.9-SNAPSHOT
[INFO] ------------------------------------------------------------------------
[INFO] 
[INFO] --- maven-clean-plugin:2.5:clean (default-clean) @ bitrepository-webclient ---
[INFO] Deleting /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-webclient/target
[INFO] 
[INFO] --- jacoco-maven-plugin:0.7.5.201505241946:prepare-agent (default) @ bitrepository-webclient ---
[INFO] argLine set to -javaagent:/home/cibuild01/.m2/repository/org/jacoco/org.jacoco.agent/0.7.5.201505241946/org.jacoco.agent-0.7.5.201505241946-runtime.jar=destfile=/home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-webclient/target/jacoco.exec
[INFO] 
[INFO] --- maven-resources-plugin:2.6:resources (default-resources) @ bitrepository-webclient ---
[INFO] Using 'UTF-8' encoding to copy filtered resources.
[INFO] Copying 2 resources
[INFO] 
[INFO] --- maven-compiler-plugin:3.1:compile (default-compile) @ bitrepository-webclient ---
[INFO] Changes detected - recompiling the module!
[INFO] Compiling 12 source files to /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-webclient/target/classes
[INFO] 
[INFO] --- maven-resources-plugin:2.6:testResources (default-testResources) @ bitrepository-webclient ---
[INFO] Using 'UTF-8' encoding to copy filtered resources.
[INFO] skip non existing resourceDirectory /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-webclient/src/test/resources
[INFO] 
[INFO] --- maven-compiler-plugin:3.1:testCompile (default-testCompile) @ bitrepository-webclient ---
[INFO] No sources to compile
[INFO] 
[INFO] --- maven-surefire-plugin:2.17:test (default-test) @ bitrepository-webclient ---
[INFO] No tests to run.
[INFO] 
[INFO] --- jacoco-maven-plugin:0.7.5.201505241946:report (report) @ bitrepository-webclient ---
[JENKINS] Recording test results
[INFO] Skipping JaCoCo execution due to missing execution data file:/home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-webclient/target/jacoco.exec
[INFO] 
[INFO] --- maven-war-plugin:2.4:war (default-war) @ bitrepository-webclient ---
[INFO] Packaging webapp
[INFO] Assembling webapp [bitrepository-webclient] in [/home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-webclient/target/bitrepository-webclient-1.9-SNAPSHOT]
[INFO] Processing war project
[INFO] Copying webapp webResources [/home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-webclient/src/main/webapp] to [/home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-webclient/target/bitrepository-webclient-1.9-SNAPSHOT]
[INFO] Copying webapp resources [/home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-webclient/src/main/webapp]
[INFO] Webapp assembled in [586 msecs]
[INFO] Building war: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-webclient/target/bitrepository-webclient-1.9-SNAPSHOT.war
[INFO] 
[INFO] --- maven-jar-plugin:2.4:test-jar (default) @ bitrepository-webclient ---
[WARNING] JAR will be empty - no content was marked for inclusion!
[INFO] Building jar: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-webclient/target/bitrepository-webclient-1.9-SNAPSHOT-tests.jar
[INFO] 
[INFO] --- maven-source-plugin:2.2.1:jar-no-fork (attach-sources-no-fork) @ bitrepository-webclient ---
[INFO] Building jar: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-webclient/target/bitrepository-webclient-1.9-SNAPSHOT-sources.jar
[INFO] 
[INFO] --- maven-assembly-plugin:2.4:single (distribution) @ bitrepository-webclient ---
[INFO] Reading assembly descriptor: src/main/assembly/assembly.xml
[INFO] Building tar: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-webclient/target/bitrepository-webclient-1.9-SNAPSHOT-distribution.tar.gz
[INFO] 
[INFO] --- maven-install-plugin:2.5.1:install (default-install) @ bitrepository-webclient ---
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-webclient/target/bitrepository-webclient-1.9-SNAPSHOT.war to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/bitrepository-webclient-1.9-SNAPSHOT.war
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-webclient/pom.xml to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/bitrepository-webclient-1.9-SNAPSHOT.pom
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-webclient/target/bitrepository-webclient-1.9-SNAPSHOT-tests.jar to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/bitrepository-webclient-1.9-SNAPSHOT-tests.jar
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-webclient/target/bitrepository-webclient-1.9-SNAPSHOT-sources.jar to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/bitrepository-webclient-1.9-SNAPSHOT-sources.jar
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-webclient/target/bitrepository-webclient-1.9-SNAPSHOT-distribution.tar.gz to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/bitrepository-webclient-1.9-SNAPSHOT-distribution.tar.gz
[INFO] 
[INFO] --- maven-deploy-plugin:2.8.1:deploy (default-deploy) @ bitrepository-webclient ---
[INFO] Downloading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Downloaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/maven-metadata.xml (2 KB at 77.9 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/bitrepository-webclient-1.9-20170220.144247-10.war
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/bitrepository-webclient-1.9-20170220.144247-10.war (12467 KB at 25546.7 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/bitrepository-webclient-1.9-20170220.144247-10.pom
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/bitrepository-webclient-1.9-20170220.144247-10.pom (3 KB at 112.8 KB/sec)
[INFO] Downloading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/maven-metadata.xml
[INFO] Downloaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/maven-metadata.xml (448 B at 31.2 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/maven-metadata.xml (2 KB at 54.0 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/maven-metadata.xml (448 B at 14.1 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/bitrepository-webclient-1.9-20170220.144247-10-tests.jar
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/bitrepository-webclient-1.9-20170220.144247-10-tests.jar (3 KB at 59.3 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/maven-metadata.xml (2 KB at 63.9 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/bitrepository-webclient-1.9-20170220.144247-10-sources.jar
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/bitrepository-webclient-1.9-20170220.144247-10-sources.jar (17 KB at 643.9 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/maven-metadata.xml (2 KB at 37.0 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/bitrepository-webclient-1.9-20170220.144247-10-distribution.tar.gz
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/bitrepository-webclient-1.9-20170220.144247-10-distribution.tar.gz (12462 KB at 24873.6 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-webclient/1.9-SNAPSHOT/maven-metadata.xml (2 KB at 50.3 KB/sec)
[JENKINS] Archiving disabled
[INFO]                                                                         
[INFO] ------------------------------------------------------------------------
[INFO] Building Bitrepository Integration 1.9-SNAPSHOT
[INFO] ------------------------------------------------------------------------
[INFO] 
[INFO] --- maven-clean-plugin:2.5:clean (default-clean) @ bitrepository-integration ---
[INFO] Deleting /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-integration/target
[INFO] 
[INFO] --- jacoco-maven-plugin:0.7.5.201505241946:prepare-agent (default) @ bitrepository-integration ---
[INFO] argLine set to -javaagent:/home/cibuild01/.m2/repository/org/jacoco/org.jacoco.agent/0.7.5.201505241946/org.jacoco.agent-0.7.5.201505241946-runtime.jar=destfile=/home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-integration/target/jacoco.exec
[INFO] 
[INFO] --- maven-resources-plugin:2.6:resources (default-resources) @ bitrepository-integration ---
[INFO] Using 'UTF-8' encoding to copy filtered resources.
[INFO] Copying 33 resources
[INFO] 
[INFO] --- maven-compiler-plugin:3.1:compile (default-compile) @ bitrepository-integration ---
[INFO] No sources to compile
[INFO] 
[INFO] --- maven-resources-plugin:2.6:testResources (default-testResources) @ bitrepository-integration ---
[INFO] Using 'UTF-8' encoding to copy filtered resources.
[INFO] Copying 1 resource
[INFO] 
[INFO] --- maven-compiler-plugin:3.1:testCompile (default-testCompile) @ bitrepository-integration ---
[INFO] No sources to compile
[INFO] 
[INFO] --- maven-surefire-plugin:2.17:test (default-test) @ bitrepository-integration ---
[JENKINS] Recording test results
[INFO] 
[INFO] --- jacoco-maven-plugin:0.7.5.201505241946:report (report) @ bitrepository-integration ---
[INFO] Skipping JaCoCo execution due to missing execution data file:/home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-integration/target/jacoco.exec
[INFO] 
[INFO] --- maven-jar-plugin:2.4:jar (default-jar) @ bitrepository-integration ---
[INFO] Building jar: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-integration/target/bitrepository-integration-1.9-SNAPSHOT.jar
[INFO] 
[INFO] --- maven-jar-plugin:2.4:test-jar (default) @ bitrepository-integration ---
[INFO] Building jar: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-integration/target/bitrepository-integration-1.9-SNAPSHOT-tests.jar
[INFO] 
[INFO] --- maven-source-plugin:2.2.1:jar-no-fork (attach-sources-no-fork) @ bitrepository-integration ---
[INFO] Building jar: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-integration/target/bitrepository-integration-1.9-SNAPSHOT-sources.jar
[INFO] 
[INFO] --- maven-assembly-plugin:2.4:single (make-assembly) @ bitrepository-integration ---
[INFO] Reading assembly descriptor: src/main/assembly/assembly.xml
[INFO] Reading assembly descriptor: src/main/assembly/tools-assembly.xml
[INFO] Building tar: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-integration/target/bitrepository-integration-1.9-SNAPSHOT-quickstart.tar.gz
[INFO] Building tar: /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-integration/target/bitrepository-integration-1.9-SNAPSHOT-tools.tar.gz
[WARNING] Entry: bitrepository-integration-1.9-SNAPSHOT/lib/bitrepository-reference-pillar-1.9-SNAPSHOT-distribution.tar.gz longer than 100 characters.
[WARNING] Resulting tar file can only be processed successfully by GNU compatible tar commands
[INFO] 
[INFO] --- maven-install-plugin:2.5.1:install (default-install) @ bitrepository-integration ---
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-integration/target/bitrepository-integration-1.9-SNAPSHOT.jar to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/bitrepository-integration-1.9-SNAPSHOT.jar
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-integration/pom.xml to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/bitrepository-integration-1.9-SNAPSHOT.pom
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-integration/target/bitrepository-integration-1.9-SNAPSHOT-tests.jar to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/bitrepository-integration-1.9-SNAPSHOT-tests.jar
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-integration/target/bitrepository-integration-1.9-SNAPSHOT-sources.jar to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/bitrepository-integration-1.9-SNAPSHOT-sources.jar
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-integration/target/bitrepository-integration-1.9-SNAPSHOT-quickstart.tar.gz to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/bitrepository-integration-1.9-SNAPSHOT-quickstart.tar.gz
[INFO] Installing /home/cibuild01/workspace/Bitrepository-reference-test/bitrepository-integration/target/bitrepository-integration-1.9-SNAPSHOT-tools.tar.gz to /home/cibuild01/.m2/repository/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/bitrepository-integration-1.9-SNAPSHOT-tools.tar.gz
[INFO] 
[INFO] --- maven-deploy-plugin:2.8.1:deploy (default-deploy) @ bitrepository-integration ---
[INFO] Downloading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Downloaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/maven-metadata.xml (2 KB at 35.8 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/bitrepository-integration-1.9-20170220.144304-10.jar
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/bitrepository-integration-1.9-20170220.144304-10.jar (33 KB at 367.9 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/bitrepository-integration-1.9-20170220.144304-10.pom
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/bitrepository-integration-1.9-20170220.144304-10.pom (4 KB at 132.0 KB/sec)
[INFO] Downloading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/maven-metadata.xml
[INFO] Downloaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/maven-metadata.xml (450 B at 36.6 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/maven-metadata.xml (2 KB at 55.6 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/maven-metadata.xml (450 B at 18.3 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/bitrepository-integration-1.9-20170220.144304-10-tests.jar
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/bitrepository-integration-1.9-20170220.144304-10-tests.jar (3 KB at 93.4 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/maven-metadata.xml (2 KB at 26.0 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/bitrepository-integration-1.9-20170220.144304-10-sources.jar
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/bitrepository-integration-1.9-20170220.144304-10-sources.jar (31 KB at 584.2 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/maven-metadata.xml (2 KB at 67.3 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/bitrepository-integration-1.9-20170220.144304-10-quickstart.tar.gz
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/bitrepository-integration-1.9-20170220.144304-10-quickstart.tar.gz (106363 KB at 25948.4 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/maven-metadata.xml (2 KB at 67.3 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/bitrepository-integration-1.9-20170220.144304-10-tools.tar.gz
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/bitrepository-integration-1.9-20170220.144304-10-tools.tar.gz (119619 KB at 24327.5 KB/sec)
[INFO] Uploading: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/maven-metadata.xml
[INFO] Uploaded: https://sbforge.org/nexus/content/repositories/snapshots/org/bitrepository/reference/bitrepository-integration/1.9-SNAPSHOT/maven-metadata.xml (2 KB at 52.2 KB/sec)
[JENKINS] Archiving disabled
[JENKINS] Archiving disabled
[JENKINS] Archiving disabled
[JENKINS] Archiving disabled
[JENKINS] Archiving disabled
[JENKINS] Archiving disabled
[JENKINS] Archiving disabled
[JENKINS] Archiving disabled
[JENKINS] Archiving disabled
[JENKINS] Archiving disabled
[JENKINS] Archiving disabled
[JENKINS] Archiving disabled
[JENKINS] Archiving disabled[INFO] ------------------------------------------------------------------------
[INFO] Reactor Summary:

[INFO] 
[INFO] Bitrepository ...................................... SUCCESS [  6.863 s]
[INFO] Bitrepository Reference Settings ................... SUCCESS [ 10.181 s]
[INFO] Bitrepository Core ................................. SUCCESS [ 45.219 s]
[INFO] Bitrepository Client ............................... SUCCESS [01:15 min]
[INFO] Bitrepository Service .............................. SUCCESS [ 21.537 s]
[INFO] Bitrepository Integrity Service .................... SUCCESS [01:43 min]
[INFO] Bitrepository Alarm Service ........................ SUCCESS [ 20.454 s]
[INFO] Bitrepository Audit Trail Service .................. SUCCESS [ 39.952 s]
[INFO] Bitrepository Reference Pillar ..................... SUCCESS [01:12 min]
[INFO] Bitrepository Monitoring Service ................... SUCCESS [ 16.954 s]
[INFO] Bitrepository Webclient ............................ SUCCESS [  5.650 s]
[INFO] Bitrepository Integration .......................... SUCCESS [ 25.467 s]
[INFO] ------------------------------------------------------------------------
[INFO] BUILD SUCCESS
[INFO] ------------------------------------------------------------------------
[INFO] Total time: 07:32 min
[INFO] Finished at: 2017-02-20T15:43:19+01:00
[INFO] Final Memory: 62M/148M
[INFO] ------------------------------------------------------------------------
channel stopped
Started indexing related Jira issue keys
Successfully indexed related Jira issue keys
Warning: you have no plugins providing access control for builds, so falling back to legacy behavior of permitting any downstream builds to be triggered
Triggering a new build of Bitrepository-deploy-ci-test
Finished: SUCCESS